CERTAIN SPECIAL REPAIR AND MINOR WORKS AT MIRAN SAHIB UNDER GE JAMMU

Amount

Dismantling timber scantling 40 Sqcm and over in section in any position as in unframed work complete all as specified and directed.

Taking down roof trusses, coupled rafters or trussed beams Above 4 metres Above 8 metres metres & upto 8 metres complete all as specified and directed.

Demolition of brickwork/stone masonary built in cement mortar including all quoins, arches, pillars, but excluding pre-cast concrete articles complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Brickwork with sub class `B` old size brick straight or curved on plan exc 6 mtr mean radius built in cement Mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall in CM 1:4 complete all as specified and directed.by Engineer-in-Charge

M&L for Reinforced cement concrete (nominal mix) 1:2:4 Type B-1(using 20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished complete all as specified and directed.

Providing edge moulding to 18-20mm thick Granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and directed.

M&l for RCC type B1 1:2:4 (20 mm graded ) as in lintal bend etc, complete all as specified and directed

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed

M&L for TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns and binding with and including mild steel wire anneled not less than 0.9 mm dia conformung TMT bar complete all as specified and directed

Description all as per serial item no 12 here in before but 5 mm dia and over upto and including 10 mm dia as in stirrups dia complete all as specified and directed

S & F Structural steel section work as in Roof trusses ( framed), post,trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections or MS tube pipe) including distance pieces, cleats etc Fe-410W(GdeE-250) quality A including shop coat of primer complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including shop coat of primer complete all as specified and directed.

S & F Plates (plain or chequered)channels, square cut or notched (ordinary and counter sunk)forming holes, without any attachment as in gusset plate, base plate etc complete all as specified and directed

S&F Mild steel bolts.purpose made.with hexagonal orsquare head one end and screwedthe other, orscrewed both ends;each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long (dia of neck exe 12 but n exe 20 mm) complete all as specified and directed

Dismantling AC corrugated, semi corrugated sheets in roof covering complete all as specified and directed

S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPs as in roof covering fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and directed

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPs as in ridge of roof fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and directed

Taking down Chowkats or frames n.exc 1.5 sq.m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exc 1.5 sq.m but n.exc 4 sqm each each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for prepartion of surface and applying two coat of white wash over new plaster surface of wall complete complete all as specified and directed.

M&L for prepartion of surface and applying two coat of cement base paint on new plastered surface complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specfied and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed.

S&F 35mm thick factory made wooden moulded panel door shutter with masonite facing on both side of (two,three,or four panel design as approved) made of solid core using machine filled rigid expanded polyurethane foam . The door facing plate shall be 3.2mm thick complete all as specified and directed.

S&F box type steel windows/Ventilator (factory made) outer frame made out ERW tube 'P' section 65X45X25 mm and shutter of ERW tube 'P' section 50mmX35mmX20mm openable (double shutter) with glazed shutter on extrernal side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 nos on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler /AC window complete all as specified and directed shown on drgs No CEPZTD-324/07 Sh 1/3 to 3/3 Note:- The quoted rate a shall also include (i). One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface (ii) 4 nos MS steel lugs made of 20X5 mm Iron flat 200 mm long iii)10 mm Sq Bar grill/guard bar design as per drawing (iv) PCC block for embedding lugs (v) Two coat of synthetic enamel paint (vi) galvanised mild steel wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 105x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in back filling, bed block for hold fast, coping, benching on corner of joints,coping of manholes etc complete all as specified and directed.

S&F 100 mm size but hinges medium weight cold rolled stainless steel complete all as specified and directed.

S&F Aluminium handles D type anodised 150 mm long ISI marked complete all as specified and directed.

S&F Aluminium handles D type anodised 125 mm long complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruted section ISI marked complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolt of extruted section ISI marked complete all as specified and directed.

S&F 300 mm long dia 16mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section complete all as specified and directed.

S&F 2nd class hard wood small fittings such as brackets of any type, shaped door and windows stops and the like article not exe 200 cucm each and fixed complete all as specified and directed.

S&F 3mm thick sheet glass, orinary quality glazing with oil putty in suare n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for preparing surface of new steel material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for Non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm screed bed CM 1:6 complete all as specfied and directed.

M&L for glazed ceramic colour tiles (450x 350 mm ) x 7 mm thick as in dados, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering CM 1:4 complete all as specfied and directed.

Material and labour for 16 to 18 mm thick granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over and including 20 mm thick screed bed of CM 1:4 incl taking down old complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc any type of pipe complete all as specified and directed.

S&F 20 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc any type of pipe complete all as specified and directed.

Dismantling water tanks exc 500 & n exe 1000 ltr complete all as specified and directed.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) five layers hoisted and fixed in position complete with all fittings complete all as specified and directed.

S&F in repair vitreous china squatting pan 'Orissa pattern, size 580x440 mm white, with integral foot rest and P or S trap and connection to flushing pipe, anti-syphonage pipe complete including provision of cement concrete bedding complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550x400 mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, waste coupling cutting, waste pipe for and pinning in ends of brackts or erecting stand complete all as specified and directed.

S&F in repair vitreous china white under counter wash basins(595x420x200 mm ) oval shape, incl waste pipe, brackets, and connecting pipe fixed complete all as specified and directed.

S&F in repair PVC valveless, symphonic action type, flushing cistern, 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair low density PVC connections commercial quality 15mm bore with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair low density PVC waste pipe32 mm bore for flusing cistern complete all as specified and directed

S&F in repair 15 mm bore bib taps long nose/long body, cast copper alloy CP fancy type with capstan head handle screwed down, screwed for brass, weight not less than 450 gms ferrule and fixed complete all as specified and directed. Make Jaguar or equivalent.

S&F in repair 15 mm bore Angle valves, cast copper alloy CP fancy type, half turn, screwed down, high pressure, with crutch or butterfly handle, weight not less than 450 gms screwed both ends for iron pipe or for unions complete all as specified and directed.Make Jaguar or equivalent.

S&F in repair 15 mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure, with capsgan head handle, weight not less than 450 gms screwed both ends for iron pipe or for unions complete all as specified and directed.Make Jaguar or equivalent.

S&F 15mm dia CP pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot or Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.Make Jaguar or equivalent.

S&F in repair 15 mm bore sawn neck pillar cock cast copper alloy, chromium plated with angular knob fixed to 15mm dia MS pipe complete with all fittings complete all as specified and directed.

S&F in repairs shower rose brass chromium plated with swivel joint of size 125 mm cast copper alloy CP fancy type with CP neck 9" long made to shape, weight not less than 350 gms complete all as specified and directed. Make Jaguar or equivalent.

Taking up or down CI/PVC pipes (including all fittings), with spigot & socket ends & lead joints including burning out joints & removing lead of 100/75 mm dia pipe complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe of bore 100mm in any length with or without ears with cement joints laid in floors complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe of bore 75mm in any length with or without ears with cement joints laid in floors complete all as specified and directed.

S&F in repair 75 mm bore Cast iron bends (any redius) with oval access doors complete all as specified and directed.

S&F in repair cast iron vent cowl 75 mm complete all as specified and directed.

S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to walls or roof for 75 mm bore pipe complete all as specified and directed.

S&F in repair 75/100 mm Cast iron floor trap with stainless steel grating including jointing to waste pipe fixed in cement concerete B1 (1:2:4) complete all as specified and directed.

S&F in repair brass CP towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

S&F MS peg set of six power coated as approved by GE complete all as specified and directed.

S&F in repair Glass shelf rectangular size 450mmx150mm, 5 mm thick glass with stainless steel bracket as per sample kept in AGE B/R office complete all as specified and directed.

Demolition of concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

S&F in repair Vitreous China urinals, half stall l type (back or corner wall type),complete including providingand fixing plugs, bedding urinalagainst wall in cement mortar1:2, securing urinal to plugs withand including 60mm long brassscrews, pointing around urinalback in cement; fixing automaticflushing cistern with brackets,flush pipe, grating and Union fordischarge pipe complete all as specified and directed.(Exclusive offixing supply pipe to flushingcistern, trap and waste pipe)

S&F in repair Gun-metal, globeor gate valves,with iron wheelhead, screwedboth ends for ironpipe and fixed for 15 mm pipe complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves,with iron wheelhead, screwedboth ends for ironpipe and fixed for 20 mm pipe complete all as specified and directed.

S&F 10mm thick frosted toughened glass as in partitions and similar work including cutting to shape rounded corners, drilling holes fixed to wall with two pair of SS clamp to wall clamp complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth with out using extra cement complete all as specified and directed.

M&L for preparation of surface and applying three coat of white wash on newly plaster surface of ceiling complete all as specified and directed.

M&L for prepartion of new surace and applying two coat of oil bound distemper new plaster surface over 1 mm thick putty complete all as specitied and directed.

M&L for preparation of old plaster or painted surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). →Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F Cast brass Screw eye 10 to 12 mm internal dia and fixed complete all as specified and directed

S & F 18 mm thick factory made 100 % solid WPC flush shutter (for cupboard and vanity etc)made from co-extruded three layer rigid foam sheet(single extruded) with 0.8 to 1 mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 kg/cum manufacturer by an ISO 9001/2015 certified company complete all as specified and directed.

S&F 30mm wide flap (when open) SS Continuous (piano) hinges, bright finish or electro galvanised fixed to Kitchen cuboard complete all as specified and directed

S&F 40 mm dia cupboard knobs fixed with nut and washer brass polished bright finished complete all as specified and directed

S&F magnet catcher 50 mm size for kitchen cupboard shutter complete all as specified and directed

S&F sinks with drainage board made of stainless steel 1 mm thick in kitchen with plugs, washers and waste coupling, waste pipe, incl bedding in cement mortar on wall incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm, bowl size 410mm x 330mm x 160 mm complete all as specified and directed.

S&F plate rack stainless steel of size 600x900 mm fixed with washer and plugs complete all as specified and directed.

Excavation in trenches, n exc 1.5m wide n exc 1.5m in depth: for foundation, etc, or for shafts , wells cesspits, manholes, pier holes, etc n. exc 10 Sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and exc 1.5m but n. exc 3.0 m deep and getting out in any type of soil complete all as specified and directed.

Demolition/breaking of drain pipes (salt glazed ware,AC or reinforced concrete) set in cement mortar and taking out off trenches and removing the debris from the site all as spd of 150mm/200 mm dia pipe inclding demoilition of cement concrete haunching etc complete all as specified and directed.

M&L concrete bed to 200 mm bore pipe in D2 1:4:8 (40mm graded aggregate) inclduding haunching against the sides of pipe complete all as specified and directed.

S & F and laying 200 mm thick reinforced concrete pipes class NP-2 laid and jointed complete with collers as in trenches and complete all as specified and directed.

M&L concrete bed to 150 mm bore pipe in D2 1:4:8 (40mm graded aggregate) inclduding haunching against the sides of pipe complete all as specified and directed.

S & F and laying 150 mm thick reinforced concrete pipes class NP-2 laid and jointed complete with collers as in trenches and complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and directed.

Removal of surplus excavated soil to a distance exc 250 m & n exc 500m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Cleaning of septic tanks/ man hole of any capacity by removing sludge and sludge water by pumping machine opreated with vaccume pressure to suck the sludge andd containing in itself and the sludge/sludge water is to be dispossed off to a distance of 2 KMs outside the periphery of defence land including taking off and refixing manholes covers complete all as specified and directed.

M&L cement concrete 1:3:6 type C-2 (40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:3:6 type (C-0 using 12.5 mm graded aggregate) as in surface channel and drains including necessary form work etc complete all as specified and directed

M&L cement concrete in benching (similar to surface channel) with concrete type B1 1:2:4 (20mm gredaded aggregate) complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement conc including moulds, mitred/stopped end etc complete all as specified and directed.

M&L Brick work with fly ash bricks , straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L providing precast cement concrete in cover slab (for manhole) type B1 1:2:4 (20mm graded aggregate) set in CM 1:4 complete all as specified and directed.

Mild steel work as in framed work as in frame for septic tank/man hole cover complete all as specified and directed

M&L cement concrete type B1 1:2:4 (20 mm graded aggrete) as in coping of manholes,kerbs or mudstops ,rounded or chamfered on edges etc complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) incement concrete 1:2:4 type B1 smooth finished and reforming benching as required of 2000mm dia pipe complete all as specified and directed.

Construction of soakage well 3.60 M dia and 3M (Effective depth)deep excavation in any tpye of soil foundation in PCC 1:3:6 walls of honey combed brick work with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick work in CM RCC cover slab M-25/SFRC cover interconnecting pipes of RCC /DEC complete filled with brick bats all as shown on drawing no. CEPZ/C-TD-013-13 complete all as specified and directed

Construction of soakage well 2.40 M dia and 3M (Effective depth)deep excavation in any tpye of soil foundation in PCC 1:3:6 walls of honey combed brick work with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick work in CM RCC cover slab M-25/SFRC cover interconnecting pipes of RCC /DEC complete filled with brick bats as shown on drawing no. CEPZ/C-TD-013-13 complete all as specified and directed

M & L for construction of septic tank for 100 users capacity including excavation and earth work in ordinary soil, foundation with PCC 1:2:4, type B-1, brickwork in CM 1:4, RCC 1:2:4 type B-1 slab, RCC precast manhole cover having 6mm plate embedded around with angle iron frame, vent shaft and sludge chambers etc all as shown on drawing no. CEPZ/C-TD-013-13 complete all as specified and directed. Note:- Rate quoted includes final depth of Invert level of septic tank on the basis of longitudinal slope of sewage line.

M & L for construction of septic tank for 50 users capacity including excavation and earth work in ordinary soil, foundation with PCC 1:2:4, type B-1, brickwork in CM 1:4, RCC 1:2:4 type B-1 slab, RCC precast manhole cover having 6mm plate embedded around with angle iron frame, vent shaft and sludge chambers etc all as shown on drawing no. CEPZ/C-TD-013-13 complete all as specified and directed Note:- Rate quoted includes final depth of Invert level of septic tank on the basis of longitudinal slope of sewage line.

S&F Cast iron soil, waste and vent pipe of bore 100mm in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe of bore 75mm in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

S&F 100 mm bore Cast iron bends (any redius) complete all as specified and directed.

S&F 75 mm bore CI branch pieces (Tee), single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access complete all as specified and directed.

S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to walls or roof for 100mm bore pipe complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 110mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

M&L for 100mm thick cement concrete 1:2:4 (using 40mm graded stone aggregate) as in pavement /hard standing finishing the surface even and fair complete all as specified and directed.

Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches,sockets, ceiling roses,bell push,bell electric,lamp holder,bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L in replacement for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note : Wiring shall be done in proper colour coding.

M&L for Point wiring One light point or One fan point controlled by one switch complete with 1.50 sqmm copper conductor multistrand pvc insulated FRLS and unsheathed cable in existing pvc rigid concealed conduit with New cast iron/pressed steel sunk terminal box covered with 3 mm thick laminated sheet hylam brand IS-2036 marked with continous pvc insulated multistrand copper wire 1.50 sqmm dia FRLS PVC insulated complete all as specified and directed.

Description all as per serial item No 132 above but for multi 5 pin 5 amp socket outlet on same board complete all as specified and directed.

Description all as per serial item No 132 above but for multi 3 pin socket outlet 5 amp socket on independent board complete all as specified and directed.

Description all as per serial item No 132 above but for multi 3 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 sqmm copper conductor multistrand cable pvc insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsteathed copper conductor multistrand cable 2.5 sqmm as earth wire FRLS pvc insulated in green color all as directed by engr-in-charge.complete with new CI/pressed steel sunken black with hylum top sheet cover complete all as specified and directed.

S & F in replacement of Socket outlet 5 Pin, 5A, flush type complete all as specified and directed.

S&F in replacement for switch piano, flush type single pole one way 5Amp, 240 volts complete all as specified and directed.

S&F ceiling rose, 3 Phase/PVC/polycarbonate isolated body complete all as specified and directed.

M&L in replacement of switch piano flush button single pole one way 15 Amp complete all as specified and directed.

M&L in replacement of socket outlet 3, 5 pin and 15 Amp multi purpose shuttered type complete all as specified and directed.

M& L in replacement for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

M& L in replacement Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and directed.

S&F in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95 , 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and directed.

S & F of LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed by Engr-in-Charge. Note:- Distribution board and MCBs should be same make.

Supply and fixing in replacement SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Supplying and fixing in replacement of PVC flat serviceable cable 10 sqmm 2 core multi stranded conductor 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

Bidder Name

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

M/S A TO Z ENGINEERS