GE 874/EWS-44/2024-25

Amount

Surface dressing n. exc 15 cm deep and getting out in soft /loose soil complete all as specified and directed.

Excavation in trenches not exc 1.50 mtr in depth and width for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 sqm on plan and getting out complete all as specified and directed.

Returning filling including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for RCC M-30 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.

M&L for RCC M-30 as in columns, pillars, piers, posts and struts complete all as specified.

M&L for RCC M-30 as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

M&L for RCC M-30, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish complete all as specified and directed.

M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surface complete all as specified and directed.

M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished complete all as specified and directed.

M&L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunching’s, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 5mm dia and over and up to and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips. Gde-I, IS 432 (part-I) complete all as specified and directed.

M&L for mild steel framed work for such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290. Gde-E-165 (ISSQ) complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in wall/septic tank/soakage well complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work, stone masonry or concrete surface, in cement mortar (1:4) finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work, stone masonry or concrete surface, in cement mortar 1:6 finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick on ceiling concrete surface, in cement mortar 1:3 finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plaster surface of wall and applying three coat of colour wash complete all as specified and directed.

All as per item No 22 above but on ceiling.

M&L for preparation of new plaster surface of wall and applying two coats of distempering walls with distemper oil emulsion complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for hardcore of gauge n. exc. 63mm deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified and directed.

M&L for 100 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregates as in sub base to floor/path/ hardstanding etc. complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection and finished even and fair complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20 to 25mm thick over and including 15 mm cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado, pillar laid over 10mm cement screed and jointed with ditto as specified and directed

S&F false ceiling E-Board of size 600x 600mm tile 10mm thick semi perforated coloured, Anodised aluminium snap grid frame work (Size of grid 605 x 605mm) with GI suspended system, metal frame work, G.I. wire mesh in false ceiling complete all as specified and directed.

M&L for 30 mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment complete all as specified and directed.

S&F pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self-tapping screw including necessary scaffolding, any type, any location/height complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws including necessary scaffolding, any type, any location/ height complete all as specified and directed.

M&L for mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe -410-W(gde-E-250) Quality A including distance pieces, cleats etc. complete all as specified and directed.

M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long, diameter of neck in 11 to 15mm complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed.

S&F IInd class hard wood plain, framed, panelled shutters 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick glazed and skeleton shutters IInd class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F IInd class hard wood plain, solid, straight chowkats and frames, (for door & window) wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S & F mild steel butt hinges 100mm long medium weight complete all as specified and directed.

S & F mild steel butt hinges 75mm long medium weight complete all as specified and directed.

S & F 200 mm size mild steel barrel tower bolt stove enamelled black, with bright bolt complete all as specified and directed.

S & F 150 mm size mild steel barrel tower bolt stove enamelled black, with bright bolt complete all as specified and directed.

S & F 300 mm long steel sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F mild steel pressed handles, 150mm oval type, stove enamelled black complete all as specified and directed.

S & F mild steel pressed handles, 125 mm oval type, stove enamelled black complete all as specified and directed.

S & F sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FR-LS-H insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green colour) as earth lead in and including cable 1100 volts grade including 25 mm casing & Capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

M&L for point wiring for one light point/Ex/fan point controlled by one switch with 2.5 sqmm PVC FR-LS-H insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25 mm casing & Capping(ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per item No 52 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board.

All as per item No 52 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.

All as per item No 54 herein before but wiring with 2.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

Supply & Fixing Socket outlet 2 in1, 3 pin 5 Amps flush type complete all as specified and directed.

Supply and fixing of Switch socket combination 2 in 1, 3 pin, 6 A flush type universal complete all as specified and directed.

Supply and fixing of Switch socket combination 2 in 1, 3 pin, 6- and 16-Amp flush type universal complete all as specified and directed.

Supply & Fixing ceiling rose surface Bakelite 65x50mm two to three terminals (ISI marked) complete all as specified and directed.

S & F lamp holder/Batton holder/angle holder insulated body with Bakelite back plate suitable for fittings complete all as specified and directed.

S & F of LED A Dore PLus 10 W B22 CDL 2 star Lamp complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & fixing of 20 W LED 6500 K Building Security Lights with best-in-class design & robust heat sink along with class leading iP, iK & surge protections for long lasting performance complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

S & F of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.

S & F of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 to 63A in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP and current carrying capacity 6 to 32A in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

M&L for sub Main Wiring with 2 run of single core, 6 Sqmm HR- FR-LS-H PVC insulated and unsheathed, multi stranded copper conductor cable using colour code for phase red and neutral black with and including 6 Sqmm FRLS PVC insulated and unsheathed copper conductor cable in green colour as earth conductor connected to common earth dolly, 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, complete all as specified and directed.

M/S MUNEER AHMAD WANI CONSTRUCTIONS (BID ID -3056060)