CA NO.CWE BLY/GE (E)/13 OF 2025- 2026SPECIAL REPAIR OF OTM ACCN BLDG NO P02 OF SEC HOSP TOILET BLOCK OF OR OTM BLDG NO T153 T155 OF INF BN BATH ROOMS TOILET OF OTM BLDG NO P47 P48 P50 SP HQ COY OR LIVING T142 QUARTER GUARD

Amount

Dismantling corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repair pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges,roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

M&L rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings, and heavy bracket framing (Beam, tee,channel, angle or flat sections ) incl distance pieces, cleats confirming to Fe 410-W gde 250 quality A and dismantling etc complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer including preparation of new steel or iron surfaces exc 10 cm width or girth complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer including preparation of old steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed.

S&F 4 mm thick E-board ceiling laid/inserted to GI frame work of grid size 605x605mm as in false ceiling all as specified, including Hangers 3 mm dia GI wire (upto 1200 mm in length) adjusting levels fixed to roof slabs/truss/purlin by cieling cleats made of GI flat 40 x 3 mm size 60 mm long complete all as specified and directed.

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 12mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement plaster 1:4 on concrete surfaces of ceilling complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specfied and directed.

M&L for preparing old plastered surfaces of walls and applying two coat of cement base paint complete all as specfied and directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coat of white wash complete all as specfied and directed.

M&L preparing old plastered or unplastered surfaces of ceiling and applying two coat of white wash on old decorated surface complete all as specfied and direcetd.

Demolition of cement concrete (unreinforced) in roofs, floors (other than ground floors) beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded aggregate as in roof for maintaining the uniform slope etc any thickness complete all as specified and directed.

M&L for preparation of roof surface applying a coat of hot bituminous primer @ 0.30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane mineral type top (weight not less than 4 kg/sqm, 3mm thick consisting 100 mm micron HMHDE FILM ) over 10 mm thick rendering in CM 1:4 including integral waterproofing compound 3% as per manufacturer instruction and complete all as specified and directed

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement over and including 10 mm thick in CM 1:4 complete all as specified and directed.

M&L for non- skid glazed ceramic tiles coloured7-8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but n xec 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 7-8 mm thick (square/rectanglar) polished area of each tiles n exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry over and over and including 15 mm thick screed bed of cement mortar in 1:4 and pointed in white or coloured cement to match coloured tiles complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 7-8 mm thick (square/rectanglar) polished area of each tiles n exceeding 0.36 sqm in dado/ skirting etc set and jointed in neat cement slurry over and including 10 mm thick cement mortar rendering in 1:4 and pointed in white or coloured cement to match coloured tiles complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and complete all as specified and directed.

M&L brushing neat cement slurry with 3.0 Kg of cement per sqm complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4.0 Sqm (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.5 Sqm each (without taking off shutters from frames) complete all as specified and directed.

S&F 35mm thick 2nd class hardwood in plain, framed, panelled shutters (any numver of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed.

S&F rolled mild steel framed work as in chowkats or frame of door or gates of angle or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fiting complete all as specified and directed.

S&F 0.63 mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks, water troughs, ducts,urinal trough and funnels etc, cut to size,edge beaded if directed, holes punched , including round headed screw, clout nails or rivets and fixed to wood or steel members, etc, with plain 40 mm lap joints or welded / riveted seams including bending, turning up, mitred angle, stopped ends, outlet, etc complete all as specified and directed.

S&F steel window with pressed steel frame (size 95x45x1.25mm) side hung shutter including box type hinges with steel handle and steel peg stay complete with glazed openable shutter with glazing bar (open out side) and wire gaugeed openable shutter without glazing bar (open inside), devetailed or welded complete all as specified and directed and as per Drg no TD/088 Dated 07 Jan 2002.. including removal of existing window frames (i) Two shutter i.e. wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) rate for filling of PCC frame deemed to be included in quoted rate. (iii) MS grill,wire gauge and glass shall be measured and paid seperately.

S&F steel ventilator with top hung shutter including including hinges steel peg stay complete all as specified and directed.

M&L for mild steel framed work such as grills grating etc with end of bars shoulderd and/or riveted welded or forged into spikes.framed guard bars iron doors.ladders framed balusters, walk ways. Railings, frame work of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S&F 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, bolt or clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specifieed and directed.

M&L for 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing all as specifed and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specifed and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specifed and directed.

S&F 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type B-21 complete all as specified and directed.

S&F 125 mm aluminium handles cast type, anodised complete all as specified and directed.

M&L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L three coat of white wash on walls including preparation of new plastered surface and complete all as specified and directed.

M&L three coat of white wash on walls including preparation of old plastered surface and complete all as specified and directed.

Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for all as specified and direcetd.

M&L for preparation of sunken floor removing of all existing treatment, brick bats and cleaning applying of 10 mm thick plaster CM 1:3 mixed with WPC as per manufacures instuctions i.e 3% by weight of cement and applying high preformance plyuerethane liquid membrane roof casting cold applied in two coat @ 1.5kg/sqm applied with spray/brush ane elongation of 300% to 700% and applying prime coat @ 0.15kg/sqm and a geotextile of 40 GSM miced in the reatio as per manufacturers specification, and PU caoat in two layers, final PU coat is sprinkled with a micro layer of sand complete all as specified and directed complete all as specified and directed

M&L for cement concrete (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed.

M&L PCC 25mm thick 1:2:4 of type B0( using 12.5mm graded stone aggregate) as in base of floors cover fillet/beads of with WPC @ 5% complete all as specified and directed.

S& in repair vitreous china squatting pan "Orissa" pattern size 580mmx 440mm white with integral foot rests excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repair vitreous china wash down european water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonic pipe etc complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and directed.

S&F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white, with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and directed.

S&F in repair vitreous china wash basin white, oval type size 550 x 450 mm excluding tap waste but including brackets and including cutting for and pinning in ends of brackets but exclusive of supply waste pipe or as on RCC shelves top complete all as specified and directed.

S&F 450mmx 600mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and directed.

S&F in repair 32mm dia waste fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F repair 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified and directed.

S&F 15 mm bore dia of pipe angle stop cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule complete all as specified and directed.

S&F in repair bib taps 15mm bore chromium plated with fancy type handle screwed down for iron pipe or brass ferrule and fixed complete all as specified and direcetd.

S&F in repair Vitreous China Urinal, Half Stall type (back or corner wall type) complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brakctes flush pipe grating and union for discharge pipe fixed complete all as specified and direcetd.

S&F vitreous china urinal partition white of size 310X700mm complete all as specified and direcetd.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and direcetd.

S&F PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified and directed.

S&F in repair swivel shower rose dia 120 mm of brass Chromium plated for fixing with 15mm pipe fixed complete all as specified and directed.

Dismantling of existing water tanks capacity exc 500 ltr n exc 1000 Ltr and removing to store complete all as specified and directed.

Dismantling of existing water tanks capacity n exc 500 Ltr and removing to store complete all as specified and directed.

S&F rotational moulded polethylene water tank of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position triple layer in white colour all as specification SSR Part- I including metalic cover (GI basin as cover) complete all as specified and directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position triple layer all as specification SSR Part- I complete all as specified and directed.

S&F 20 mm bore gun metal, globe or gate valves, with iron wheel head , screwed both ends for iron pipe complete all as specified and directed.

S&F 20 mm bore Ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap plain with greting including jointing with solvent cement complete all as specified and directed.

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore complete all as specified and directed.

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore complete all as specified and directed.

S&F 15mm bore unplsticised PVC pipes of pressure rating 10 kgf/cm2 laid in trenches/ wall water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and directed.

S&F 20mm bore unplsticised PVC pipes of pressure rating 10 kgf/cm2 laid in trenches/ wall water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and directed.

Taking up or down existing PVC pressure pipe any class & any size (including all fitting) including disconnecting pipes and fittings complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110 mm PVC (SWR) bend any radius complete all as specified and directed.

S&F 110mm bore PVC(SWR) junction single (single T) equal or unequal with access door complete all as specified and directed.

S&F mild steel work as in stack clamps out of 20mmx3mm flat iron for fixing including securing ends of stays to wall or roof PVC 75 mm dia pipe with wall complete all as specified and directed.

S&F mild steel work as in stack clamps out of 20mmx3mm flat iron for fixing including securing ends of stays to wall or roof PVC 100 mm dia pipe with wall complete all as specified and directed.

Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brick work with fly ash bricks (old size) straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with fly ash old size bricks straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC type B0 1:2:4 (12.5 mm graded aggregate) in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L for granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing types over 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 20 mm thick granite (of any type) tiles machine cut in skirting/ dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick rendering in CM 1:4 complete all as specified and directed.

M&L mild steel TMT bars 10mm dia, and over cut to length bent to shape required including cranking, bending spirally for hoping ends for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F in repair hat and coat hooks, solid body, 175mm to 250 mm of brass complete all as specified and directed.

S&F in repair soap dish 160x160x90mm, chromium plated type fixed to plugs with chromium plated brass screwed complete all as specified and directed.

S&F in repair 15 mm bore dia of stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup complete all as specified and directed.

S&F in repair CP towel rail 20mm dia, 600 mm long between flanges complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads to required slope gradient, camber etc complete all as specified and directed.

Removing excavated material exc. 1.5KM but n. exc. 5.0KM and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watere and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in floors complete all as specified and directed.

M&L for 22 mm thick rubber moulded chequered cement concrete coloured tiles area of each tile exc 0.06 sqm but n.exc 0.12 Sqm, set & jointed in neat cement slurry and pointed with cement & pigment to match the shase of tiles in floors over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for bricks, sub class B, laid dry, laid on edge in floors of old size on edge complete all as specified and directed.

Taking down of aluminium window/ door from frame and minor repair with beading/glass repair etc and refixing one same complete all as specified and directed.

Taking down carefully, old unserviceable aluminium point wiring (light, fan, socket, bell, buzzer or power) complete including unserviceable fittings such as switch, socket, ceiling rose, lamp holder, light fittings, bakelite sheet, terminal box, etc. and making good to disturbed surfaces of wall/floor and ceiling etc. and removal, complete all as specified and as directed. Note:- Existing LED bulbs/ fittings are not to be removed and rates are inclusive of taking down & refixing of existing LED fitting at any location as directed by Engg-In-Charge. Disturbed surfaces shall be made good by plastering and applying two coats of white wash or OBD to match the existing surface finishes.

M&L for point wiring for one light/fan bell /buzzer point controlled by one switches with cable 1.5 sqmm size PVC nsulated (unsheathrd) copper conductor cable of size 1.5 Sqmm, PVC insulated unsheathed FRLS cable complete with all fittings and accessories including sunken cast iron or pressed steel terminal box for mounting of switches, sockets, fan regulators etc but providing new cover 3mm thick laminated,(Hylem) sheet top cover fastened with chromium plated screws and 1.5 Sqmm PVC insulated unsheathed 1100 volts grade single core FRLS cable with solid copper conductor green colour continues earth wire connected to common earth dolly completed all as directed and as specified for the following :-

All as per item Sr No. 113 one 3-pin socket outlet 5 Amp on independent board complete all as specified and directed.

All as per item Sr No. 113 one 3 pin socket outlet 5 Amp on same board complete all as specified and directed.

All per Srl item No. 113 here-in-before, but with 2.5 Sqmm copper conductor cable complete all as specified for One 3 pin socket outlet 15 Amp on independent board complete all as specified and directed.

Taking down and refixing the same LED lights fittings connection up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F switch piano flush type polycarbonate SP one way 5 Amps complete all as specified and directed.

S&F socket out let 3 pin 5 amp multipurpose flash type complete all as specified and directed.

S&F switch piano flush type polycarbonate SP one way 15 Amps complete all as specified and directed.

S&F socket out let polycarbonate 2 in 1, 3 pin 5/15 Amp multipurpose, flush type 240 volt complete all as specified and directed.

S&F ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete all as specified and directed.

S&F in replacement stepped type electronic fan regualtor flush type on the existing phenolic laminated sheet etc complete all as specified and diricted.

Supply and replace the Industrial laminated hylam sheet of size 250 mmx 200 mm, 3 mm thick ISI marked complete all as specified and directed.

Supply and replace the Industrial laminated hylam sheet of size 175 mm x 100 mm, 3 mm thick ISI marked complete all as specified and directed.

Supply and replace the Industrial laminated hylam sheet of size 100mmX100mm, 3 mm thick ISI marked complete all as specified and directed.

Supply and replace iron rectengular block 100 mmx 100 mm and 50mm deep, 1.6 mm thick sheet for mounting switches, Sockets, fan regulator etc. complete all as specified and directed.

Supply and replace iron rectengular block 175 mmx 100 mm and 50mm deep, 1.6 mm thick sheet for mounting switches, Sockets, fan regulator etc. complete all as specified and directed.

Supply and replace iron rectengular block 250 mmx 200 mm and 50mm deep, 1.6 mm thick sheet for mounting switches, Sockets, fan regulator etc. complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with warm white highefficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp/ offwhite suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp complete all as specified and direcrted.

M&L for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as an earth continuity conductor complete all as specified and directed. Note :- Two run of 4.00 sqmm copper cable, one run of 4.00 sqmm copper cable and one run of conduit shall be measured as one unit.

S&F MCB SP 6-32 Amp braking capacity series 240 volts 50HZ complete all as specefied and directed

S&F MCB SPN 10-63 Amp braking capacity series 240 volts 50HZ complete all as specefied and directed.

S&F double door MCB distribution board sheet steel powder coated DBs suitable for MCB fitted with bus bar nutral link earth bar and Din Rail Single face 240 Volt and nutral confirms to IS 13032-1991 of 8 Ways complete all as specified and directed.

S&F box type LED light fitting suitable for 4 feet 1x20 watt complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F for lamp holder insulated body of PVC/ polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Taking down and refixing after painting of exhaust fan of any size any capacity such as replacement of bearing, shaft, bushes,capacitor, blade, locking pins, louvers, nut bolt and washers complete & spray painting with synthetic enamelled paint of approved colour (as approved by GE) with mounting bracket and grouting the foundation bolt in wall and making connection complete all as specified and directed.

Shree Ram Construtions (BID ID -3358855)

MOHINDER SINGH AND SONS (BID ID -3359344)

Ikrar khan & co. (BID ID -3359066)

Quality Builders (BID ID -3359565)

Shikhar ji Enterprises (BID ID -3359307)

M/S Rajeev Sharma and Co. (BID ID -3359466)

UTTRAKHAND BUILDERS (BID ID -3359003)