Repair/replacement/Maint of External Water Supply Distribution System, Electric Motors, Starters Supply of Water Treatment Chemicals alongwith connected Items in Domestic Area at AF Stn Bhisiana

Amount

Excavation in trenches in soft/loose soil n.exc 1.5m wide and n. exc 1.5m depth for laying pipe line, complete all as specified and as directed by Engineer-in-Charge.

Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified.

Removal of surplus excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc. 1.5 above the starting point complete all as specified.

Taking out /down old unserviceable PVC/GI pipe of 80 mm dia including all fittings etc from trenches complete all as specified and directed.

Supply, laying, jointing and testing GI pipe medium grade 80 mm bore with all new fittings, laid in trenches including jointingmaterial etc complete all as specified and directed.

Taking out /down old unserviceable PVC/GI pipe of 100 mm dia including all fittings etc from trenches complete all as specified and directed.

Supply, laying, jointing and testing GI pipe, medium grade 100 mm bore with all new fittings, laid in trenches including jointing material etc complete all as specified and directed.

Taking out /down old unserviceable GI pipe of 50 mm dia including all fittings etc from trenches complete all as specified and directed.

Supply, laying, jointing and testing GI pipe medium grade 50 mm bore with all new fittings, laid in trenches including jointing material etc complete all as specified and directed.

Taking out /down old unserviceable GI pipe of 40 mm dia including all fittings etc from trenches complete all as specified and directed.

Supply, laying, jointing and testing GI pipe, medium grade 40 mm bore with all new fittings, laid in trenches including jointingmaterial etc complete all as specified and directed.

Taking out /down old unserviceable GI pipe of 25 mm dia including all fittings etc from trenches complete all as specified and directed.

Supply, laying, jointing and testing GI pipe pipe, medium grade 25 mm bore with all new fittings, laid in trenches including jointing material etc complete all as specified and directed.

Taking out /down old unserviceable GI pipe of 20 mm dia including all fittings etc from trenches complete all as specified and directed.

Supply, laying, jointing and testing GI pipe, medium grade 20 mm bore with all new fittings, laid in trenches including jointing material etc complete all as specified and directed.

Taking out /down old unserviceable GI pipe of 15 mm dia including all fittings etc from trenches/Bldg complete all as specified and directed.

Supply, laying, jointing and testing GI pipe, medium grade 15 mm bore with all new fittings, laid in trenches/Building including jointing material etc complete all as specified and directed.

Taking out /down old unserviceable CI pipe of 300 mm dia including all fittings etc from trenches complete all as specified and directed.

Supply, laying, jointing and testing CI spun pipe centrifugally cast iron "LA" ISI marked 300mm dia spigot and socketed ends suitable for lead joints in trenches complete all as specified and directed.

Taking out /down old unserviceable CI pipe of 250 mm dia including all fittings etc from trenches complete all as specified and directed.

Supply, laying, jointing and testing CI spun pipe centrifugally cast iron "LA" ISI marked 250mm dia spigot and socketed ends suitable for lead joints in trenches complete all as specified and directed.

Taking out /down old unserviceable cI pipe of 200 mm dia including all fittings etc from trenches complete all as specified and directed.

Supply, laying, jointing and testing CI spun pipe centrifugally cast iron "LA" ISI marked 200mm dia spigot and socketed ends suitable for lead joints in trenches complete all as specified and directed.

Taking out /down old unserviceable cI pipe of 150 mm dia including all fittings etc from trenches complete all as specified and directed.

Supply, laying, jointing and testing CI spun pipe centrifugally cast iron "LA" ISI marked150mm dia spigot and socketed ends suitable for lead joints in trenches complete all as specified and directed.

Taking out /down old unserviceable CI pipe of 100 mm dia including all fittings etc from trenches complete all as specified and directed.

Supplying, laying, jointing and testing CI spun pipe centrifugally cast iron "LA" ISI marked 100mm dia spigot and socketed ends suitable for lead joints in trenches complete all as specified and directed.

Taking out /down old unserviceable CI pipe of 80 mm dia including all fittings etc from trenches complete all as specified and directed.

Supplying, laying, jointing and testing CI spun pipe centrifugally cast iron "LA" ISI marked 80mm dia spigot and socketed ends suitable for lead joints in trenches complete all as specified and directed.

M&L for run lead joints for 300mm dia spigot and socketed CI pipe fittings including spun yarn etc.

M&L for run lead joints for 250mm dia spigot and socketed CI pipe fittings including spun yarn etc.

M&L for run lead joints for 200mm dia spigot and socketed CI pipe fittings including spun yarn etc.

M&L for run lead joints for 150mm dia spigot and socketed CI pipe fittings including spun yarn etc.

M&L for run lead joints for 100mm dia spigot and socketed CI pipe fittings including spun yarn etc.

M&L for run lead joints for 80mm dia spigot and socketed CI pipe fittings including spun yarn etc.

S&F cast iron body sluice valve 300mm dia having gun metal spindle complete with opening wheel, both ends flanged & drilled including all necessary fittings like rubber flange joints with nuts, bolts, washers on both side of the sluice valve etc PN-1.6 (ISI Marked) including taking out old u/s sluice valve of any type complete all as specified & directed by Engineer-in-Charge.

All as per item No.36 above but having size 250 mm dia bore

All as per item No.36 above but having size 200 mm dia bore

All as per item No.36 above but having size 150 mm dia bore

All as per item No.36 above but having size 100 mm dia bore

All as per item No.36 above but having size 80 mm dia bore

Dismantling the electric induction motor AC, 3 phase,415 Volts from the foundation by disconnection of cable and coupling connection of pump and shifting to the civil workshop for the following repir/replacement work all as specified and directed by Engr-in-charge (a) Re-winding the motor with supper enameld copper winding wire having suitable size copper wire with proper insulation including varnishing , heating complete. (b) Replacement of ball bearing NBC 6309 with providing of high grade grease (c) Re-assembling the complete motor and shifting to the same to its existing location and re-connection all cable and coupling and testing the same on load all as directed by Engr-in-charge

All as per item No.42 above but having 7.5 HP capacity motor.

All as per item No.42 above but having 10 HP capacity motor.

All as per item No. 42 above but having 20 HP capacity motor.

All as per item No.42 above but having 40 HP capacity motor.

M & L for CI fittings bend (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket) etc Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs of size 200mm to 300mm complete all as specified and directed.

M & L for CI fittings bend (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket) etc Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs of size upto 150mm complete all as specified and directed.

S & F Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 50 mm bore iron pipe and fixed including testing complete all as specifed and directed by Engr-in-Charge.

All as per item No.45 above but having size 40 mm dia bore

All as per item No.45 above but having size 25 mm dia bore

All as per item No.45 above but having size 20 mm dia bore

All as per item No.45 above but having size 15 mm dia bore

M&L for construction of brick masonry valve pit (type ‘C’) of size 120 cm x 120cmx90 cm (internal dimension of chamber) , depth of chamber to be reckoned from the top of PCC in foundation to top of MS cover with and including MS sheet cover fabricated from 3 mm thick MS sheet and frame of angle iron 40 x 40 x 6 mm with fixing arrangement, hinges and locking arrangement and painting two coat of synethetic enmel paint over a coat of red oxide primer on MS cover and frame , including necessary excavation and earth work in any type of soil , returning , fiilling in approved soil, disposal of surplus soil to a distance not exc. 50 m, 150 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation , brick work in cement mortor (1:6) , 15 mm thick plastering in cement mortor (1:4) (both internally and externally), 100 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate in flooring complete all as directed by Engr-in-Charge.

M&L for construction of brick masonry valve pit (type ‘C’) of size 90cm x 90cmx90 cm (internal dimension of chamber) , depth of chamber to be reckoned from the top of PCC in foundation to top of MS cover with and including MS sheet cover fabricated from 3 mm thick MS sheet and frame of angle iron 40 x 40 x 6 mm with fixing arrangement, hinges and locking arrangement and painting two coat of synethetic enmel paint over a coat of red oxide primer on MS cover and frame , including necessary excavation and earth work in any type of soil , returning , fiilling in approved soil disposal of surplus soil to a distance not exc. 50 m, 150 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation , brick work in cement mortor (1:6) , 15 mm thick plastering in cement mortor (1:4) (both internally and externally), 100 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate asin flooring complete all as directed by Engr-in-Charge.

Construction of brick masonry valve pit (type ‘C’) of size 60cm x 60cmx90 cm (internal dimension of chamber) , depth of chamber to be reckoned from the top of PCC in foundation to top of MS cover with and including MS sheet cover fabricated from 3 mm thick MS sheet and frame of angle iron 40 x 40 x 6 mm with fixing arrangement, hinges and locking arrangement and painting two coat of synethetic enmel paint over a coat of red oxide primer on MS cover and frame , including necessary excavation and earth work in any type of soil , returning , fiilling in approved soil disposal of surplus soil to a distance not exc. 50 m, 150 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation , brick work in cement mortor (1:6) , 15 mm thick plastering in cement mortor (1:4) (both internally and externally), 100 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate asin flooring complete all as directed by Engr-in-Charge.

S & F Foot valve suitable for 100 mm dia bore pipe complete all as specified and directed by Engr-in-Charge.

S & F Foot valve suitable for 150 mm dia bore pipe complete all as specified and directed by Engr-in-Charge.

M&L for Desilting and cleaning of raw water channel out side of compound wall RCC slab lowering from channel and then manually lifting mud/sludge from the bottom surface of the channel and cleaning the side walls (inside) with help of wire brush and including cutting grass, bushes both sides of the channel up to two metre each side from centre of the channel upto entire stisfaction of Engineering-in-Charge and depositing the same not exceeding 50m where as directed including minor repair to channel and leveling after cleaning the RCC slab and relaying the original position on channel complete all as directed.

M&L for Desilting and cleaning of raw water channel inside boundary wall from compound wall to raw water tank No.4 manually lifting mud/sludge from the bottom surface of the channel and cleaning the side walls (inside) with help of wire brush and including cutting grass, bushes both sides of the channel up to two metre each side from centre of the channel upto entire stisfaction of Engineering-in-Charge and depositing the same not exceeding 50m where as directed including minor repair to channel and leveling the surface both sides of channel complete all as directed.

M&L for Demolitoin of brick work built in cement mortar complete all as specified and directed

M&L for Brick work with sub class `B' old size bricks, straight or curved on plan exceeding 6mtr mean radius built in CM 1:4 complete in surface channel etc all as specified and directed

M&L for Cement concrete in surface channel and drains type B2 1:2:4 using 40mm graded aggregate including demolishing the broken cement concrete complete all as specified and directed by Engr-in-Charge

Taking down cement or cement lime plaster any description from brick wall/brick stone wall/concrete etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge

M&L for Cement plaster 1:4 rendering 10mm thick on fair faces of brick work or concrete surfaces and or deduct to/form the rates for each 5mm thickness over or under 10mm thick all as specified and directed by Engr-in-Charge.

S&F Rubber coupling TC-16/TC-14 suitable for 40 HP Centrifugal pump complete all as specified and directed by Engr-in-Charge

S&F Rubber coupling as per sample suitable for 20 HP Centrifugal pump complete all as specified and directed by Engr-in-Charge

Earthing complete with GI earth plates electrode 600x600x6mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level surrounded with adequate quantity of charcoal dust mixed with salts to a packet thickness of 15 cm all around the plate,using GI earth strip 32x6mm connected to earth plate by means of nut ,bolts and washers as directed GI pipe light grade 50mm bore on water pipe from earth chamber to copper edge of earth plate,CI funnel with wiremesh fixed on water pipe and PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in pit chamber and RCC pitcover 50mm thick pre-cost RCC 1:2:4 type B-1 dully rainforced with MS bars 6mm dia @150 cc both ways with 10mm dia MS bar in lifting handle excavation earth work including laying of GI pipe in walls etcall as directed in electrical plate No 3 of SSR pt I complete all as specified and directed.

Supply and laying for XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, PVC sheathed, stranded conductor, 1100 volts grade, cross-sectional area of size 25 sq mm 4 core laid in trenches or passing though pipe/or fixed with wall/ pole etc, including testing complete all as specified

Supply and laying for XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, PVC sheathed, stranded conductor, 1100 volts grade, cross-sectional area of size 35 sq mm 4 core laid in trenches or passing though pipe/or fixed with wall/ pole etc, including testing complete all as specified

Supply and laying for XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, PVC sheathed, stranded conductor, 1100 volts grade, cross-sectional area of size 50 sq mm 3.5 core laid in trenches or passing though pipe/or fixed with wall/ pole etc, including testing complete all as specified.

Supply and laying for XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, PVC sheathed, stranded conductor, 1100 volts grade, cross-sectional area of size 70 sq mm 3.5 core laid in trenches or passing though pipe/or fixed with wall/ pole etc, including testing complete all as specified

Supply and laying for XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, PVC sheathed, stranded conductor, 1100 volts grade, cross-sectional area of size 95 sq mm 3.5 core laid in trenches or passing though pipe/or fixed with wall/ pole etc, including testing complete all as specified

M&L for sand filling , in trenches for under ground cable including punning down of sand in layers all as specified and directed. ( Noted: punned thickness shall be measured and paid .)

M & L laid in trenches continuous brick class 'B' covering over cables for protection of cables .

S&F DOL stater suitable for 5HP to7.5HP electric motors including necessary electric connections complete all as directed

S&F Star-Delta stater suitable for 10HP electric motors including necessary electric connections complete all as directed

S&F Star-Delta stater suitable for 20HP electric motors including necessary electric connections complete all as directed.

S&F Star-Delta stater suitable for 40HP electric motors including necessary electric connections complete all as directed

S&F in replacement MCCBs 400 Amps,4pole having rupturing capacity 36KA,415 volts including termination point for connection complete all as specified and directed

S&F in replacement MCCBs 250 Amps,4pole having rupturing capacity 36KA,415 volts including termination point for connection complete all as specified and directed

S&F in replacement MCCBs 200 Amps,4pole having rupturing capacity 25KA,415 volts including termination point for connection complete all as specified and directed

S&F in replacement MCCBs 160 Amps,4pole having rupturing capacity 25KA,415 volts including termination point for connection complete all as specified and directed

S&F in replacement MCCBs 125 Amps,4pole having rupturing capacity 25KA,415 volts including termination point for connection complete all as specified and directed

S&F in replacement MCCBs 100 Amps,4pole having rupturing capacity 16KA,415 volts including termination point for connection complete all as specified and directed

S&F in replacement MCCBs 63 Amps,4pole having rupturing capacity 16KA,415 volts including termination point for connection complete all as specified and directed

Dismantling/taking down the centrifugal pump set of capacity 40 HP from foundation after disconnecting of discharge, suction and induction motor connection and shifting to the same to civil work shop at Bathinda for the following repair :- (a) Dismantling the complete pump and taken out main shaft and impeller from the pump by disconnection of all nuts, bolts and washers and minor repair and balancing of main shaft and impeller by necessary lathe and machine work and replacement with complete new gasket and mild steel nut, bolt and washer complete all as directed. (b) Replacement of ball bearing NBC 6312 including providing of required grease complte 02 Nos. (c ) Re-assembling the complete and fixing at site and connection of suction, discharge and the induction motor and testing the same on full load complete all as specified.

All as per item No.83 above but having 40 HP pump.

All as per item No.83 above but having 20 HP pump.

All as per item No. 83 above but having 7.5/10 HP pump.

M&L for repairs to UNSV star delta starter for pump set of following capacity by replacing terminal overload relay, coil of any other parts required for proper functioning of pump sets.

All as per item No. 87 above but having 40 HP pump.

All as per item No. 87 above but having 20 HP pump.

All as per item No. 87 above but having 7.5/10 HP pump.

S&F Non return valve of 150mm dia bore by replacing leather washer etc insertion, packing materials, nut, bolts, washers with new ones all as directed by Engr-in-charge

S&F in replacement Non return valve of 100mm dia bore by replacing leather washer etc insertion, packing materials, nut, bolts, washers with new ones all as directed by Engr-in-charge

M&L for replacement of Pump motor coupling fully suitable for 40 HP pump with rubber bushes

M&L for replacement of Pump motor coupling fully suitable for 20 HP pump with rubber bushes

M&L for replacement of Pump motor coupling fully suitable for 10 HP pump with rubber bushes

S&F Gun Metal Impeller suitable for 40 HP Pump

S&F Gun Metal Impeller suitable for 20 HP Pump

S&F Gun Metal Impeller suitable for 10 HP Pump

S&F Gun Metal Impeller suitable for 5-7.5 HP Pump

M&L for replacement of gland flange suitable for 5 to 40HP monoblock pump set incl replacement of gland packing all as directed

M&L for replacement of U/S rubber insertion packing suitable for 200mm CI foot valve / suction pipe flanged incl replacement of U/S nut and bolts

M&L for prepration of old painted surface of 40 HP Centrifugal Pump and motor by scratching /rubbing down the old paint by wire brush or emery paper and applying two coat opf synthetic enamelecd paint etc. complete all as specified and directed .

All as per item No.102 above but having 20HP motor and pump.

All as per item No.102 above but having 2 to 7.5HP motor and pump.

S&F Aviation obstruction light fitting yellow painted dia-cast aluminium alloy housing, red coloured polycarbonate dome and accessories including 2 Nos GLS Lamp of 100 watt and all fixing arrangement complete all as specified and directed

Physio-chemical bacteriological testing of water (raw water and clear water) from the institute / lab as approved by the GE complete all as per IS : 10500 - 1991 including collection of water sample and submitting the same with institute / lab all as specified and directed by Engr-in-Charge.( Note : The water testing parameters will be given by the department)

Radioactive test of drinking water (Canal water after chlorination and Borewell water) as per IS-10500:2012 (Parameters : Gross Alpha & Gross Beta test) at department of Atomic Energy, Board of Radiation & Isotope Technology, BARC/BRIT, Navi Mumbai all as specified and directed by Engr-in-Charge

Arsenic test for drinking water from the institute / lab as approved by the GE complete all as per IS : 10500 - 1991 including collection of water sample and submitting the same with institute / lab all as specified and directed by Engr-in-Charge

Supply only water based sodium hypo-chloride liquid with pale yellow or green colour and shall not provide any sludge or turbidity :- (i) Relative density at 25 centigrade = 1.07 to 1.13 (ii) Available chlorine as (CL) percent by mass of volume = 4.0 to 6.0 (iii) Total chlorine percent by volume as (CL) 4.0 to 6.0 (iv) Free alkali as (NaCH) G/L minimum =1.0 (v) Free sodium carbonate as (NaCo3) G/L Min 0.5 (vi) Iron as (Fe) PPM max - 0.4 (vii) Sodium chlorite traced. Note :- The above sotres are reqd for disinfection of raw water

Supply only Alum Ferric Gde-4 for purification of water containing lead as (pb) 30 PPM confirming to IS 799/1989 with 4th revision (best quality from Bhilwara, Rajasthan)

M&L for dismantling the 40 HP Motor and pump from the channels and all electrical connection, repair the plinth bearing the load of 40HP Motor pump, replace the UNSV channel with new channels of size MC-75 cut to ordinary length as per sample and and reassembling the motor pump and connection of all electrical accessories all as specified and directed by Engr-in-Charge

M&L for stopping leakege of GI Pipe upto 100mm dia by replacing any type of (bend, tee, elbow, reducer, end plug, taper, union, nipple, socket etc) all as specified and directed by Engr-in-Charge (Excavation deemed to be included in quoted rate)

100mm dia GI Pipe

80mm dia GI Pipe

50mm dia GI Pipe

40mm dia GI Pipe

25mm dia GI Pipe

15mm dia GI Pipe

S&F packing sheet of leather suitable for 40 HP Pump all as specified and directed

S&F packing sheet of leather suitable for 20 HP Pump all as specified and directed

Repairs to Valve Masonry Pit (by means of internal plastering, replacement of angle iron, MS Sheet etc) of following size :-

M/s Luxmi Constructions

classic estate developers

Aman Enterprises