NIETNo/06of2026_27/AE/BESD/PWD

Roof treatment by application of non toxic polyurethane modified acrylic based single component (P U Roof Coat) solvent free, cold applied polyurethane modified elastomeric waterproofing membrane with excellant UV resistant capasity as per ASTM D6083fa water based 100% acrylic elastomeric emulsion polymer latex coating .,.. used as protective coating for roofs} after preparing the surface by cleaning and ti repairing the roof cracks by cement & sand mortar (1:4), preferably with antishrinkage mortar (to be paid separately) if any, apply two coats along with a Priming coat (two coats) of P U Roof Coat and one coat of primer coat compatible with Sqm. i main product as per manufacturers specification) and reinforced with or without 20 gsm Geotextile Fleece, including the cost of primer coat and basepreparation, tools & Plants but excluding the cost of scaffolding and stagging complete as per direction of Engineer -in-charge.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar, 15 mm thick plaster.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any hight and in any floor including removing rubbish wihin a lead of 75 m as directed. Wall of opposite side of toilet of ADM (Education)

Supplying, fitting 1st quality cerammmic tiles in walls and floors tomatch with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring axide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. Wall With Sand Cement Mortar (1:3) 15 mm thick & 2mm thick cement slurry at back side of tiles using cement @ 2.91 kg./Sq.m & joint filling using white cement slurry @ 0.20kg./Sq.m. Area of each tile above 0.09 Sq.m. Coloured decorative.

GST-18% (SGST=9% & CGST=9%) ADD

LABOUR WELFARE CESS = 1% ADD