WBPWDTE/AE/BESD-II/e-NIQ 08 of 2025-26

Amount

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. MakeLegrand or equivalent model of L&T/ABB/Crabtree or as per direction of EIC ) as to GS. 2+12 way Enclosure

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection Make-Legrand/ L&T/ABB or as per direction of EIC. 240 V, 40A DP

Supplying and fixing 240/415 V, 6A - 32A SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. Make-Legrand/ L&T/ABB or as per direction of EIC.

S&F 240V 32A DP MCB of Breaking capacity 10kA & C characteristics on din rail ofexisting DBs and necessary connection. (Make - Legrand or equivalent model of L&T/ Siemens)

Supplying and fixing 4 way MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire (approved make) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar with holes fixed on bakelite/hard rubber insulation over the welded chairs incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65 inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]. Average run 8 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish. On Board

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe/PVC rigid pipe and by the prelaid GI fish wire and making necy. connection as required. 2X6 sqmm + 1X4 sqmm

2X2.5 sqmm+1x1.5 sqmm (for power plug point).

3X1.5 sqmm ( for separate Plug Ponits)

Finishing of the PVC insulated wire ends by socketting with pin/ring type Cu sockets and insulated tapes etc. including supplying sockets, tapes. 6 sqmm.

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works. 20mm rigid pipe.

Supply & Fixing 240 V, 2 nos 6A, plug socket with 2nos separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 200 x 150 x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supplying of 1.1 KV grade following sizes Al. armoured PVC/XLPE.( Make-Glostar / RR Kabel / Polycab) as per direction of EIC. 2 core 10 sqmm ( from PDB to SPNDB)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: 2 core 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 2 core 10 sqmm

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Supplying & Fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing materials as required. 25 mm dia

S&D Single LED tube light fitting complete with all accessories [Philips make Cat No. TMC-501 P1xT-LED 22W P3241 or equivalent model of CG / Bajaj / Wipro/Magik as approved by E.I.C] incl. S&D of 1 no. 22W Master LED Tube with interconnection as per direction of EIC.

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

S&F angular holder (Anchor) on 3" wooden double round block incl. S&F 12 Watt LED lamp Make-Philips / Havells /CG / Orient or as per direction of EIC

S&D 9" (225mm) Heavy duty best quality AC Metal body Exhaust fan (Make : EPC or equivalent of Crompton/Usha as approved by E.I.C) complete with all accessories incl. making hole in wall and mending good damages and smooth cement finish etc. as practicable as possible also providing necy. length of PVCinsulated wire and making connection as per direction of EIC. S&F Louver shutter on wall with necy. nuts & bolts (6mm dia x 62mm long).

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diamete. 23 cm (9")

Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum soil.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F No.6 SWG GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Supply & Delivery of 70 W LED outdoor street light fittings (Make- Crompton CRP-411-90-57-SL-GL-NSG or equivalent model no. of Philips/Magik/Surya) complete with all accessories.

Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed / projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. (a) upto 150 mm thick

ARUN KUMAR BARUA (BID ID -7857806)

UDAY DUTTA (BID ID -7857738)