Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹24.7 L+₹45,850 (1.89%)Rejected-AOC | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | DURAI ENGINEERING WORKS | RAYAN AND COMPANY |
|---|---|---|---|---|---|
| 1.00 | Charges for dismantling 4Nos mill outlet elbows/bends/ inlet elbows after suitably supporting the adjacent coal pipes wherever required, removing, lowering them to ground floor from various heights (10mt. to 32mt.) and placing them in Unit V as directed by the Engineer-in-charge, including the charges for temporary support, platform, scaffolding, cutting gas, welding electrode etc., and hire charges for T&Ps. | 40 | Ton | 8,40,000 ₹9,91,200 | 8,20,000 ₹9,67,600 Lowest |
| 2.00 | Charges for reconditioning the eroded fuel inlet elbows, bends by patch welding if required lifting the new/reconditioned mill outlet elbow, bend/inlet elbow/new one and fitting them in correct position aligning with vertical straight pipe and renewal of victualic coupling gasket 20L and aligning reassembling and also renewal of kicker blocks if necessary, removing the temporary supports including cost of consumables such as cutting gas, M.S. electrode etc., | 40 | Ton | 9,20,000 ₹10,85,600 | 9,14,000 ₹10,78,520 Lowest |
| 3.00 | Charges for loading, transporting and lifting of fuel inlet & outlet elbows, bends, coal pipes from stores to work site and devolution of wornout mill inlet elbows, coal pipes and bends from work site to stores, including cost of consumable. | 20 | Ton | 60,000 ₹70,800 | 59,000 ₹69,620 Lowest |
| 4.00 | Cutting of 10mm thick patches of various sizes and prepare the patches to suit the eroded portions of coal bends, inner cone assembly and welding these patches including devolution of scraps to stores as per the direction of the engineer in charge. | 120 | Mtrs | 51,600 ₹60,888 | 50,400 ₹59,472 Lowest |
| 5.00 | Cutting the wornout pipes of varied length, grinding edges and welding with coal pipes collars in the respective area inclusive of cutting the new coal pipe of same length and devolution of scraps to stores. | 24 | Nos | 2,44,800 ₹2,88,864 | 2,37,600 ₹2,80,368 Lowest |
| 6.00 | Charges for arresting the existing coal pipes bottom to top at 11m and 13m and 15m & 17m location for providing rigid support and for easy removal of orifices and replacing 1mtr eroded pipe. | 4 | Location | 27,200 ₹32,096 | 26,000 ₹30,680 Lowest |
| 7.00 | Charges for removing wornout sleeve coupling after providing necessary supports in fuel pipe and platform wherever required and fixing new or reconditioned sleeve coupling including cost of consumables and transportation charges. | 16 | Nos | 2,72,000 ₹3,20,960 | 2,64,000 ₹3,11,520 Lowest |
| 8.00 | Charges for making scaffolding arrangements and loading platform at the bottom of the coal pipe at 14 mtr height at boiler corner 1 to 4 for easy dismantling and assembling the coal pipe. The dismantling scaffolding arrangements supports and loading platform. | 1 | No | 42,500 ₹50,150 | 42,000 ₹49,560 Lowest |
| 9.00 | Material On Contractor Scope:
Champion style 20 non metallic graphite asbestos fibre jointing sheets
2000 X 1500 X 3 mm. | 75 | Kgs | 12,000 ₹14,160 | 11,250 ₹13,275 Lowest |
Tender Value
Refer Docs
EMD Value
₹20,600
Closing Date
2 Jun 2025, 2:00 pmClosed
CE/TTPS
O/o CE/TTPS
TTPS Operation Circle MPM II Unit IV Replacement of pulverized coal pipes, bends and fittings between mill and upto 32 mtr level of boiler area during the forthcoming overhaul
2025_EB_559088_1
CE/SE/O/TTPS/Spec.No.121/25-26
Open Tender
Miscellaneous Works
Item Rate
20 days
TTPS
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹20,600
Yes
26 Nov 2025
17 May 2025
3 Jun 2025
17 May 2025
2 Jun 2025
17 May 2025
Charges for dismantling 4Nos mill outlet elbows/bends/ inlet elbows after suitably supporting the adjacent coal pipes wherever required, removing, lowering them to ground floor from various heights (10mt. to 32mt.) and placing them in Unit V as directed by the Engineer-in-charge, including the charges for temporary support, platform, scaffolding, cutting gas, welding electrode etc., and hire charges for T&Ps.
Charges for reconditioning the eroded fuel inlet elbows, bends by patch welding if required lifting the new/reconditioned mill outlet elbow, bend/inlet elbow/new one and fitting them in correct position aligning with vertical straight pipe and renewal of victualic coupling gasket 20L and aligning reassembling and also renewal of kicker blocks if necessary, removing the temporary supports including cost of consumables such as cutting gas, M.S. electrode etc.,
Charges for loading, transporting and lifting of fuel inlet & outlet elbows, bends, coal pipes from stores to work site and devolution of wornout mill inlet elbows, coal pipes and bends from work site to stores, including cost of consumable.
Cutting of 10mm thick patches of various sizes and prepare the patches to suit the eroded portions of coal bends, inner cone assembly and welding these patches including devolution of scraps to stores as per the direction of the engineer in charge.
Cutting the wornout pipes of varied length, grinding edges and welding with coal pipes collars in the respective area inclusive of cutting the new coal pipe of same length and devolution of scraps to stores.
Charges for arresting the existing coal pipes bottom to top at 11m and 13m and 15m & 17m location for providing rigid support and for easy removal of orifices and replacing 1mtr eroded pipe.
Charges for removing wornout sleeve coupling after providing necessary supports in fuel pipe and platform wherever required and fixing new or reconditioned sleeve coupling including cost of consumables and transportation charges.
Charges for making scaffolding arrangements and loading platform at the bottom of the coal pipe at 14 mtr height at boiler corner 1 to 4 for easy dismantling and assembling the coal pipe. The dismantling scaffolding arrangements supports and loading platform.
Material On Contractor Scope: Champion style 20 non metallic graphite asbestos fibre jointing sheets 2000 X 1500 X 3 mm.
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .