Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance KALIKA GUNJ COLONY SIRSIA GIRIDIH JHARKHAND | GIRIDIH | JHARKHAND | 815301 | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹25.8 L
Closing Date
11 Oct 2023, 5:00 pmClosed
Nodal Officer
Chairman, e-Procurement Cell, Room No. 326, 3rd Floor, Building Construction Department, Jharkhand Mantralaya, Dhurwa, Ranchi-834004
Proposed Construction of State Hangar at Hinoo, Ranchi.
2023_BCD_76071_1
BCD/Ranchi-1/03/2023-24
Open Tender
Civil Works - Buildings
540 days
RANCHI
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
EE BCD Building Divison No-01 Ranchi
₹25.8 L
Building Construction Department, 3rd Floor, Room
14 Nov 2023
21 Sept 2023
13 Oct 2023
21 Sept 2023
11 Oct 2023
21 Sept 2023
29 Sept 2023
Amount
Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.
Extra for earthwork in hard soil as per specification and direction of E/I. (vide classification of soil item-B)
Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation frenches within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).
Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).
Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
Providing designation 75 B brick work in C.M.(1 :6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.
Providing designation 125 mm thick reinforced designation 75 A brick work in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials , scafolding, raking out joints to 15 mm depth, curing, taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/l.
Providing designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" x 4.5" x 3") in C.M. (1:6) in superstructure with approved quality of clean sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.
Providing 112mm thick reinforced designation 100A brickwork fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" x 4.5" x 3") in C.M. (1:4) in superstructure with approved quality of clean sand of F.M. 2 to 2.5 including the cost of screening carriage of material scaffolfing raking out joint to 15mm depth curing taxes and royalty (but excluding the cost of reinforcement ) all complete as per building specification and direction of E/I.
Extra for brick work for each consecutive floor above first floor including watering and scafolding, all complete as per direction of E/l.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :-1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size)
1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement:1½ coarse sand:3 graded stone aggregate 20 mm nominal size)
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Centering and shuttering including strutting, propping etc. and removal of form for :
Foundations, footings, bases of columns, etc. for mass concrete
Suspended floors, roofs, landings, balconies and access platform
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Columns, Pillars, Piers, Abutments, Posts and Struts
Stairs, (excluding landings)
Weather shade, Chajjas, corbels etc., including edge
Extra for R.C.C .or P.C.C. work for each consecutive floor above first floor complete as per direction of E/I
Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with Aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.
Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with one side teak decorative and another side commercial veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.
Providing Tor steel reinforcement of 8mm. dia. rods as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. TMT Fe 500 ( Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd.. Bokaro, and Vizag (RINL).
Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l.
(a) 10mm TMT Fe 500 ( Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd.. Bokaro, and Vizag (RINL).
(b) 12mm TMT Fe 500 ( Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd.. Bokaro, and Vizag (RINL).
(c) 16mm TMT Fe 500 ( Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd.. Bokaro, and Vizag (RINL).
Providing Tor steel reinforcement of 20mm. 25mm. 28 mm, 32mm dia. bars as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l.
Providing Tor steel reinforcement of 20mm. 25mm. 28 mm, 32mm dia. bars as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l.
Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)
Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10 cm size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/l.
Supplying, fitting and fixing M.S. grill gate with M.S. grills made of 20x6mm M.S. flats or 16mm square bars fitted on 25x25x6mm M.S Angle frame including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l. (where steel is not supplied by the deptt.)
Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.
Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curring, taxes and royalty all complete as per building specification and direction of E/l.
Providing and laying Double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less then 0.08% and conforming to IS: 15622/ISO 13006 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement:4 Coarse sand0, jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with wite cement and matching pigments etc, complete Size of tiles 600 x 600 mm.
Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.
Providing 25 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
Extra for plaster work over exterior surface for each consecutive floor above first floor including cost of scaffolding etc. all complete as per direction of E/l.
Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.
Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/l.
Providing two coats of synthetic enamal paint of apporoved shade and make over new wooden surfaceincluding cleaning the surface after removing dirt, scales smokes grease and sand papering , including cost of scaffolding and taxes all complete as per building specefication as direction of E/I
Supplying, fitting and fixing 30mm thick solid core type decorative single leaf flush door shutter with one sides teak decorative and another side commercial veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with Aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.
Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification)
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.
Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.
Water proofing for old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flextble material brush, roller or spray for water proofing coating per manufacturer Specifications with following steps :-(a)surface preparation .-Providing and cleaning of concrete surface to remove dust, oil, grease including removal of existing (loose paint / coating, and cement laitance by cleaning with compressed air water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage leakage. On identification of seepage cement grouting to be done with non shrink expanding admixture of Sika India Pvt.L.td.) MYK Schomberg / Dr Fixiti/ Fosroc or equivallent. Providing and reparing of all Corner and joints such as those between the parapet wall and the roof slab etc shall be chamfered with 150Mrn X 150 mm fillet of mortar (Cement: sand - 1:4) admixed with acrylic pc?' lymer of Sika/ Fosroc/MYK Schomberg/Dr 1:4) admixed with acrylic polymer of Sika/ Fosroc/MYK Schomberg/Dr Fixit or equivalent.,Befor 'Chamfering a prime coat shall be given with the slurry of acrylic polymer Repairing surface irregularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modified repair mortar-including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete.(b)lst Coat :- Apply 1st coat of two component acrylic modified, ready to use, flexible cementitiot.is material on surface saturated dry roof and inside wall of Parapet.Wall upto 600 mm by brush or roller . After 1st coat of application , 45 gsm of Fibre glass cloth to lay when the first layer is still green. 1st coat shOUld be applied @1.50 kg/Sqmt/coat. For the purpose of measurer-11609-1'e entire treated surface will be measured." (c) 2nd Coat :-To apply the 2nd coat of two component acrylic modified read to use, flexible cementtiOus material right angle to the 1st. coat over the glass fibre laid surface: 2nd coat-,should be applied @ 0.7 Sqmt/coat. For the purpose of measurement the entire treated surface will be measured." After three days of drying the 2nd coat , the rain water outlets to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification to be done as per satisfaction of E/C. The waterproof coating to be protected from damage before screed over it. Water proofing Brand:- Sika Topseal 109hi / Fosroc Brushbond RFXI Dr. Fixit Pidiffin 2K / MYK Aquafin TG . Product Performance - Chemical Base Part A: Acrylic copolymer, Part B: Specially graded cementitious powder - Density 1.6 kg/I (mixed density) at +27°C Tensile Strength -2 Nimm2 after 28 days (with Fibre cloth) (According to ASTM D 2370) Pullout Bond Siren th -2 f\l/mm2 concrete failure Accordin' to ISO4624) Slant-Shear Bond Strength -4 Nimm2 (According to FIP 5.15) Elongation at Break -35% Without Fibre Cloth and 20% with Fibre Cloth (According to ASTM D 2370) (d) )Protection of treated surface with PCG :- The treated surface should be covered with 25mm/50mm F'CC of M-20 grade (1.1.5:3). with proper slope ( 1:120) towards the rain outlets in alternate panels of 2 mt x 2 mt keeping 6 rnm gap between the panel joint. Integral water proofing admixture conforming to IS 2645 co of 100 ml per bag of of cement to be added in the screed concreie(paid separately.for this items).All corners shall be chamfered with 150mm X 150 mm fillet. The rainwater outlets shall be just leveled with the screed concrete to ensure smooth discharge of water - the peripheral gaps between pvc pipe outlet and concrete surface should be packed prorSeqswith ridti:corict'ete and the peripheral mouth to be sealed with,moisture insensitive epoxy putty of. Sika India .Pvt.Ltd. / MYK Schornbefg /Dr Fixit/Fosroc .For the purpose of measurement the entire treated surface will be measured." (e)Groove of PCC surface should be filled with POlysulphide Sealant.(Paid Separately). Be d - Sika India Pvt.Ltd. / MYK Schomberg / Dr Fixit/Fosroc . Warranty for five years.
Covering of treated surface with PCC :-providing 25 mm thick Cement Concrete M20 (1:1:5:3) maintaining slope in alternate 2 mt x 2mt panels With approved quality of stone chips of 20mm to 6 mm size graded and Cleaned sand of F.M.2.5 to 3 including screening, shuttering, and mixing Cement concrete in mixer with admixture of integral water proofing and Placing in position, striking curing, taxes and royalty all complete as per Building specification and direction of E/I. Panels that has been left should Be casted next day. There should be 6 mm gap between panels .brand- Sika _ plastocrate plus, MYK proof WP 10, Fosroc- Conplast X 421 ic Dr Fixit Pidiproof LM+
Providing and mixing liquid integral water proffing compound in conctrete of plaster as manufacturer specification and as per direction of engineer in charge. Brand. Sika plastocrate plus, MYK proff WP 10, Fosroc-Conplast x 4211C, Dr.Fixit, Pidiproff LW+ or Equivalent
Providing and filling of 6 mm thick Groove between 25 mm PCC Panels with Polysuiphide Sealant (Porin.g Grade)as per drawings and technical specificationsi6nd direction of E in Charge. (with 18% GST) B rand Sika Polysulphide, Fosrpc-Thioflex 600 Dr. Fixit Pidiseal PS(42P. MY K Seal PS or Euivalent.
Cost of Driling 200mm x 165mm x 125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site.
(a) From 0.00 M to 50.00 M below G.L.
(b) From 51.0 M to125.00 M
Supplying submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415V + 10%, 3PH, 50 Hz, A.C. supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 metre submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 2 HP
Supplying Full automatic star selta starter to operate induction motor working on 415v 3phase 50hz with no coil. Over load element , On _OFF push buttom with necessary materials and connection to Supply etc complete starter with original sheel steel encloser as per 3914. F.A.S.D starter 10 H.P
Supply fitting and fixing GI pipe 50 mm Dia (TATA or equivalent make) Medium Quaility as per IS:1239 ( part 01 ) 2004
Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m :-All kinds of soil
Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m :-All kinds of soil
Supplying chemical emulsion in sealed containers including delivery as specified.-Chlorpyriphos emulsifiable concentrate of 20%
Treatment of soil under existing floors using chemical emul?sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:-With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
Supply fitting and fixing GI pipe 50 mm Dia (TATA or equivalent make) Medium Quaility as per IS:1239 ( part 01 ) 2004
Centering and shuttering including strutting, propping etc. and emoval of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
Extra for providing and mixing water proofing material 'Impermo' or equivalent in cement concrete work @ 1 kg per 50kg of cement.
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
Providing and fixing sheet covering over expansion joints with iron screws as per design. Aluminium fluted strips 3.15 mm thick. 200 mm wide
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). 5.33.1 All works upto plinth level
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture,on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing,polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.“a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc.
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : sqm 8.12.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable-Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge:Profile C Fixing with adjustable lugs with split end tail to each jamb
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C Fixing with adjustable lugs with split end tail to each jamb
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
Structural steel work in riveted, bolted or welded in built up sections, trusses and frame work, including cutting, hoisting, fixing in position and applying a primer coat of approved steel primer all complete.
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Supplying and making out door cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core XLPE aluminium conductor cable of 11 kV grade as required.-70/95 Sq.mm.
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile as per Design-Size of Tile 600x600 mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge-Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m²
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
75 mm diameter
110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Coupler 75 mm
Coupler 110 mm each
Single pushfit Coupler 75 mm
Single pushfit Coupler 110 mm
Single tee with door 75x75x75 mm
Single tee with door 110x110x110 mm
Single tee without door 75x75x75 mm
Single tee without doo 110x110x110 mm
Bend 87.5° 75 mm bend
Bend 87.5° 110 mm bend
Shoe (Plain) 75 mm Shoe each
Shoe (Plain) 110 mm Shoe
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
Ridges plain (500 - 600mm)
Gutter .(600 mm over all girth)
Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.-GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
Insulated Piping i.e Nitrile Rubber Insulation: Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of min. 40 kg/cum density , thermal conductivity 0.037 W/MK or better at 20 degree mean temrture class "O" insulation applied by suitable adhesive complete including repairing of damage to building etc . as per specifications and as required complete in all respect.a)The Pipes size 150mm & below shall be M.S. heavy class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia and from 7 mm thick MS sheet for pipes of 400 mm Dia & above.
50mm dia. (32mm thick insulation)
40mm dia. (32mm thick insulation)
32mm dia. (19mm thick insulation)
25mm dia. (19mm thick insulation)
Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS C class along with necessary clamps, vibration-isolators and fittings such as bends, tees etc but excluding valves,strainers and gauges etc adequately supported on rigid supports duly painted/buried in ground excavation & refilling etc. as per specifications and as required complete in all respects.The Pipes size 150mm & below shall be M.S. heavy class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7 mm thick MS sheet for pipes of 400 mm dia & above-The Pipes size 150mm & below shall be M.S. heavy class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7 mm thick MS sheet for pipes of 400 mm dia & above
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin- Charge.-With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin- Charge.-With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 178 mm
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
Providing and fixing C.P. brass Stop Cock (concealed) of standard designand of approved make conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
Providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25 mm waste hole
Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gm
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 gms
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc
15 mm nominal dia Pipes
20 mm nominal dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
25 mm nominal dia Pipes
32 mm nominal dia Pipes
40 mm nominal dia Pipes
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe
Supplying and fixing C.I. cover without frame for manholes : 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) and For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- inCharge
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.
Carriage of materials from source to site work including loading & unloading all complete job as per specification and direction of E/I
Aggregate
Stone Metal
Stone Chips
Brick
Fly Ash Brick
Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.(A) 580 mm long (c) with 10.0 lit. low level P.V.C. cistern
Supplying, fitting and fixing vitreous white glazed earthen ware indian squating type 600x350mm urinal plate of parry, Hindustan or anyother l.S.S. approved make with internal flushing rim, 100mm white glazed earthen ware channelabout 1m. long 5litre capacity C.l.automatic flushing cistern of reliance or any other approved make with fittings R.S. or C.l. brackets 1Smm and 45 cm long PVC / Alkathenepipe standard G.l: flush pipe for backand front with spreader fittings and brass coupling etc. 15 mm C.l. Body'brass spindle stop cock weight not less than 450 grams. all complete including painting of exposed parts with 2 coats of approved paint over a coat of red oxide primer and cutting the wall and floor and making good the same as oer soecification and direction of E/|-a) 600 mm x 350 mm size (large)
Supplying, fitting and fixing C.P. brass towel rail 20mmX600mm with bracket container
Providing and laying non- pressure NP2 class ( light duty ) R.C.C. pipes with collars jointed with still mixture of cenent mortar in the proportion of 1:2 ( lcement : 2 fine sand ) including testing of joints etc. complete. 150 MM dia R.C.C. pipe
Supplying, materrials and labour for constructing inspection chamber of designation class 75B brick size 750mm deep, 600X450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600X475mm G.I. cover with frame (weight not less than 35kg) alongwith earth work in excavation and 80mm thick PCC (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.
Wiring for Light point/fan point/exaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in recessed PVC conduit, with modular type switch , Modular plate, suitable G.I boxes and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required . ( Havells/C&S/HPL/Legrand/Anchor/ Polycab) Group-C
Power Plug Wiring in PVC conduit (2x4 sq. mm): Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 number 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
2x1.5 Sqmm + 1x1.5 sqmm earth wire for separate 3 pin 5A sockets
2x2.5 Sqmm + 1x2.5 sqmm earth wire for switch board
4x6 Sqmm + 2x6 sqmm earth wire-
4x10 Sqmm + 2x6 sqmm earth wire for power MCB DBs
SITC of 2 Pair unarmoured PVC staircase cables of conductor size 0.5 sq.mm annealed tinned electrolite grade copper , PVC insulated twisted pairs bunch togeather over all PVC sheathed , Laid on tray or along the wall or laid in pipes or in trenches including excavation of cable trench, sand filling covering with bricks and back filling complete as required. Make: Polycab/ Finolex/ Deltron/Havells/Anchor/Molex/Schenider
TV Cable in Existing Conduit: Supplying and drawing of co-axil TV cable RG-6, grde copper conductor, PE insulated, with PVC sheath in the existing surface / recessed steel / PVC conduit as required.
Supplying and fixing of following sizes of medium class PVC conduit along with acessories in surface/ recess including cutting the wall and making good the same as required.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required
5/6 A switch on switch board
3 pin 5/6 A socket outlet on switch board
S/F Modular type switch socket - Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required RJ11 Telephone outlet
TV antena socket outlet
Supplying and fixing Modular type blanking plate-Supplying and fixing modular blanking plate on existing modular plate switch box excluding modular plate etc. as required.
S/F Modular boxes, base & cover plate - Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 module (78mm x 78mm x 45mm)
S/F Modular boxes , base & cover plate(Gang Box): Supply and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. -100 mm X 100 mm X 60 mm deep
S/F light plug point with modular type accessories - Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc. as required . (For light plugs to be used in non residential buildings)
S/F power plug point with Modular type accessories - Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface of in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as required. (For light plugs to be used in non residential buildings)
S/F Ceiling Rose: Supplying and fixing 2 pin 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
S/F Batten Holder: Supplying and fixing batten/angle holder including connection etc. as required.
Erection on Incandescent light fitting : Erection of wall bracket/ ceiling fittings of all sizes shapes containing upto two GLS amps per fittings complete with all accessories including connection etc. as required.
ITC Ceiling Fan :- Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq. mm. FRPVC insulated,copper conductor,single core cable etc, as required.
ITC Exhaust Fan upto 450 mm sweep: installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to cut the size of the above fan, making good the damage, including connection, testing, commissioning etc as required.
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as required.( but without MCB/RCCB/ Isolator).
6 way single door
Supplying and fixing the follwing way Three Pole pole and Neutral Sheet steel M.C.B distribution board, 415 volts in recess, completed with tinned copper busbar, neutral bus bar, earth bus bar, din bar, hinged front acrylic cover from MCB Knob detachable gland plate, interconnection including earthing etc. as required(without MCB/RCCB/Isolator). Make-Havells/ Legrand/ Polycab/ C&S/ Hager/ABB / HPL /Anchor
4 way(4+12) Double door Horizontal type for Power DBs
6 way(4+18) Double door Horizontal type (Lighting=4 nos+power=8 nos)
8 way(4+24) Double door Horizontal type-(Lighting=4 nos+UPS DBs=4 nos)
S/F 'C' series SP MCB: Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required.
6/32A Single Pole
40A TPN MCB
S/F TPN RCCB: Supplying & fixing following rating, TP&N 415 V, residual current circuit breaker(RCCB) , having a sensitivity current upto 300mA in existing MCB DB complete with connections, testing and commissioning etc. as required.-40 Amps for lighting DBS+UPS DBs
P/F MV Danger Notice Plate: Providing and fixing M.V. danger notice plate of 200mmX150mm, made of mild steel at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in the single red colour on front side as required.
P/F Danger Notice Plate : Providing and fixing H.T. danger notice plate of 250mmX200mm, made of mild steel at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in the single red colour on front side as required.
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm
Providing and fixing earth bus 25mmX5mm GI strip on surface for connections etc. as required.
Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing alongwith the existing cable as required.
Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size exceeding 95 sq.mm. but not exceeding 185 sq.mm. direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
MV Cable Laying up to 400 sq. mm. in Ground :- Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size exceeding 185 sq.mm. but not exceeding 400 sqmm direct in ground including excavation, sand filling, protective covering and refilling the trench etc as required.
Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size exceeding 95 sq.mm. but not exceeding 185 sq.mm. direct in ground in the same trench one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size exceeding 185 sq.mm. but not exceeding 185 sq.mm. direct in ground in the same trench one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 35 sq.mm. direct in ground including excavation, and refilling the trench etc as required but excluding sand coushioning and protective coverong .
Erection of metalic Pole of following length in cement concrete 1:3:6 ( 1 cement:3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc as required.
Supply and fixing of 70W LED street light fitting ,with die cast aluminium housing of ingress protection of IP65 and complete with all accessories etc on pole including connection and earthing the body etc as required. Make- Wipro/Bajaj/ Philips/ Havells.
Floodlights 100W : Supply, installlation, testing and commissioning of Environmental friendly, new generation,aesthetically designed, ultra modern LED floodlight luminaire with pressure diecast housing and toughened glass IP66 protection in existing pole/ pipe with supply voltage 100-270V, 50Hz, AC. Luminaire shall confirm to IS: 10322 Part-5/Section-5 and shall be complete with all necessry accessories as required. ( Make: Wipro/ Havells/Bajaj/ Philips)
240W LED Flood light I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722with all neccssary acc$sories as required-240W LED Flood light I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722with all neccssary acc$sories as required
Panel 18W LED(1'x1') :Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling.( make : Havells /Bajaj/ Philips/Jaquar)
Panel 36W LED(2'x2') :Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling.( make : Havells /Bajaj/ Philips)
Supply of BLDC Ceiling Fan: Supply, installation, testing and commission of BLDC 5 Star, 32W, 1200 mm Sweep AC ceiling fan conforming to IS: 374:2019 of , including connection with 1.5 sq mm copper wire, down rod of standared length(upto 30cm) with all accessories as required. Make :- Polar/Bajaj/Crompton / Havells / GEC.
LED tube with Batten 20W : Supplying and fixing of wall mounted LED 20W tube + batten and electronic driver and accessories as required. ( Make -Wipro/Bajaj / Havells/ Philips)
LED Post top of 45W WH : Supply and fitting of LED post top made in cast aluminium with decorative opal polycarbonate diffuser IP65 protection on existing pipe with all others accessories as required. Make_of Bajaj /Havells/ Jaguar/Polycab/Wipro)
MV Cable:- Supply of ISI marked aluminium cable conductor XLPE PVC insulated cable as per IS:7098 armoured, served, sheathed, 1100V grade with Termination and Laying of cable. Make:- Finolex / Polycab / Havells / Universal -3.5C x 25 Sqmm.
MV Cable:- Supply of ISI marked aluminium cable conductor XLPE PVC insulated cable as per IS:7098 armoured, served, sheathed, 1100V grade with Termination and Laying of cable. Make:- Finolex / Polycab / Havells / Universal -3.5 Core 35 Sq mm main panel to external feeder pillar
3.5 Core 120 Sq mm ( for each floor panel and fire fighting panel)
3.5 Core 185 Sq mm for DG supply to main panel(2 run for each DG)
3.5 Core 240 Sq mm ( for AC panel , Capacitor panel )
3.5 Core 300 Sq mm ( 2 run from Transformer secondary to Main panel ACB)
Supply and fixing of PVC sheathed following conductor 1.1 KV grade armoured Cable of following sizes including making end termination with compression gland & bimetalic lugs, and support etc.complete as required. Make:Polycab/Mescab-3 × 6 sq.mm.(aluminium)
MV Cable:- Supply of ISI marked aluminium cable conductor XLPE PVC insulated cable as per IS:7098 armoured, served, sheathed, 1100V grade with Termination and Laying of cable. Make:- Finolex / Polycab / Havells / Mescab/KEI - 2CX10 sq. mm armoured AL Cable.( for street light)
MV Cable:- Supply of ISI marked aluminium cable conductor XLPE PVC insulated cable as per IS:7098 armoured, served, sheathed, 1100V grade with Termination and Laying of cable. Make:- Finolex / Polycab / Havells / Universal -4 Core 10 Sq mm (For external lights)
9.0m height Octagonal Hot -dip glavinized pole(BOP-9032) :Supply, installation of 9.0m height OctagonalHot -dip glavinized pole with top dia 70mm, bottom dia 175mm & made of 3mm thick sheet, base plate dimension 275x275x16mm(L X B X T) including suitable sizes of foundation bolt all complete as required.( without arm)
Supplying and fitting 11 Mtr. height Octagonal Hot - Dip galvanized pole( BOP - 1133) with top dia 90 mm, bottom dia240 mm & made of 3 mm thick sheet, base plate dimensions 320 X 320X 16 mm ( L x B x T) including suitable sizes of foundation bolt all complete as reqd. (Without Arm) -0.5m single arm suitable for 70mm top pole
Supply of Exhaust metal Fan 230mm(9"): Supply and fitting of 230mm(9"), 230V AC metal exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc as required( Make- Polar/ Havells/Crompton)
Supply of Metal Exhaust Fan 15"(380mm)(for Kitchen): Supply of 15"(380mm), 230V AC metal exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc as required( Make- Polar/Bajaj/ Havells/Crompton)
Supply of Wallmounted Fan: Supply of 16"(400mm), 230V AC wall/cabin fan including fixing the bracket, making , connection testing, commissioning etc as required( Make- Polar/Bajaj/ Havells/Crompton)
LED Bulb 9W/10W : Supplying and fixing of LED 9W /10W bulb and accessories as required. ( Make -Bajaj / Havells/ Philips)
Silent DG Set 250kVA: Supply, installation, testing & commissioning of 250kVA, DG Set, 415V, 3 phase, complete with AMF panel including one EOD breaker of suitable rating, radiator dry battery and fuel tank , canopy enviroment friendly, sound less Cater Pillar/Kirloskar make or Equivalent
Providing and placing on terrace (at all floo levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and marking necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank.
SITC of 3 Phase Online 40 KVA UPS Preffered Make-Vertiv/GUTUR/APC/Numeric
3 core PVC insulated PVC sheathed copper conductor flat submersible cable. Supplying , Flat flexible submersible cable with ,copper conductor , PVC insulated and PVC sheathed as IS:7098 3 Core 4 Sq mm. Copper wire
MS Battery Rack suitable for 40 to 50 UPS Battery installation
SITC of 12V, 65 Ah SMF Battery, with 24 months replacement-VRLA- AGM maintenance -free,26520 VAH
Supply and fixing of PVC sheathed following conductor 1.1 KV grade armoured Cable of following sizes including making end termination with compression gland & bimetalic lugs, and support etc.complete as required. -3.5 × 50 sq.mm.(aluminium)
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required- 1 Run CAT6 UTP Cable (for Network only . (Make:Legrand/Panduit/Molex/RIT/Siemon)
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
300 mm width X 50 mm depth X 1.6 mm thickness
450 mm width X 50 mm depth X 2.0 mm thickness
600 mm width X 50 mm depth X 2.0 mm thickness
Supplying and installing following size of perforated Hot Dipped galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required
300 mm width X 50 mm depth X 1.6 mm thickness
450 mm width X 50 mm depth X 2.0 mm thickness
600 mm width X 50 mm depth X 2.0 mm thickness
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
300 mm width X 50 mm depth X 1.6 mm thickness
450 mm width X 50 mm depth X 2.0 mm thickness
600 mm width X 50 mm depth X 2.0 mm thickness
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required
300 mm width X 50 mm depth X 1.6 mm thickness
450 mm width X 50 mm depth X 2.0 mm thickness
1.1kV Cable End Termination: suppluing and fixing indoor cable end termination with brass double compression gland and AL lugs of following sizeAl armoured cables.
3.5 Core 25Sq mm armoured AL(28mm)
3.5 Core 35Sq mm armoured AL(32mm)
3.5 core 70 Sq mm
3.5 core 120 Sq mm
3.5 core 185 Sq mm
3.5 core 240 Sq mm
3.5 core 300 Sq mm (70mm)
4Cx10 sq.mm
Supplying, installation, testing and commissioning of optical / photoelectric type Smoke detector or heat detector as per requirement and mounting base with LED light complete as required. Make:Qutak/Bosch/Honeywell/Siemens/Tyco
Supplying, installation, testing and commissioning of manual call box in suitable enclosure with arrangement to raise the alarm by pressing the alarm button, resettable and non-breaking glass type complete as required. Make:Qutak/Bosch/Honeywell/Siemens/Tyco
Supplying, installation, testing and commissioning of microprocess base main fire alarm control panel with LCD Display lights. The panels shall have 240 volts AC power supply automatic Battery charger 24 Volts sealed lead acid maintenance free battries as complete with batteries, battery charger illuminated numeric digram complete as required. Make:Honeywell/ ASES/ Qutak/ Bosch
Supplying, installation, testing & commissioning of ceiling/wall mounted Pubmic announcement speaker, 3/1.5 Watt in ABS enclosure complete as required.
Providing and laying 25 mm dia PVC conduit complete with required junction boxes in recessed / surface with SLC system PVC insulated copper conductor FRLS cable of 2x1.5 sq.mm. as required. Make:Polycab/Mescab/Havells/Gloster/Bonton
Providing and fixing IS marked butterfly valve (PN 1.6) complete with companion flanges, bolts, nuts, rubber insetions etc.
80 mm diameter
100 mm diameter
150 mm diameter
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required -150 mm diameter
Providing and fixing check valve (NRV) complete with companion flanges, bolts, nuts, rubber insetions etc.
80 mm diameter
100 mm diameter
150 mm diameter
Pendent/Sidewall/upright type standard response sprinkler with quartzoid bulb overating temperature 68 degree centgrade, of 15 mm orifice and k factor 80 (5,6) made out of forged brass and chrome finish. Make:Safex/Atasi/Tyco
Providing and fixing S.S Fire Hydrant Valve of approved quality with 63 mm female, instant, ovlique, single outlet, 80 mm flanged inlet, brass spindle, cast iron wheel m A.B.S. blank cap and chain. conforming to IS: 5290 complete with companion flange, bolts, nuts, rubber insertion / compressed asbestos gasket etc. and painted in fire red colour.
Providing and fixing swinging, wall mounting type First Aid Hose Reel of approved quality and made from compresed steel sheet with dust cover, cast iron brackets including 30 m long, 19 mm nominal bore, high presure braided rubber hose as per IS:444 Type hose guide, PVC shut off nozzle with 6 mm outlet and 25 mm nominal bore gun metal inlet valve, bolts, nuts rubber insetion etc. painted in Fire red colour including cutting and making good the walls wherver required.
Providing and fixing in position 63 mm nominal bore and 15 m long synthetic fibre, CP fire hose pipe of approved make bearing IS: 636 -1988 type A mark and having TAC and MMD approved with a pair of 63 x 63 mm gun metal instantaneous type, heavy duty delivery hose coupling (conforming to IS: 903) bound and riveted to the hose pipe with copper rivets and copper wire complete.
Providing and fixing in position short SS brach pipe of approved quality with 63 mm male instatneous type inlet and 15 mm outlet nozzle complete conforming to IS : 903
Providing, laying, testing & commissioning of IS 1239 marked black M.S pipe including all fittings i.e bend, elbows, tees, flanges, reducing socket, nuts and bolts, gaskets etc fixed with welded / screwed joints. including necessary excavation, backfilling, removal of surplus soil etc. min. 1 mtr deep excavation and wrapping with anticorrosive treatement with 4 mm thick asphalt tape as per IS:10221, refilling the trench etc. OR fixed with screwed or welded joints, hanged with clamps, hanger supports, dash fasteners, bolts, nuts, rubber insertions etc including threading, cutting, welding, edge preparation, painting of approved colour over two coat of primer, cutting & making good the wall/ floor wherever required, complete as required or as directed by engineer incharge.
150 mm diameter
100 mm diameter
80 mm diameter
65 mm diameter
50 mm diameter
40 mm diameter
32 mm diameter
25 mm diameter
Special type of C.P. Bath room fittings for V.l.P. Buildings (JAL, Jaquar, Marc or equivalent make) (lSl Marked)
Earth work in surface excavation not exceeding 30 cm in depth but exceeding1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, as per directions of Engineer in Incharge: All kinds of soil
Supplying and stacking at site dump manure from approved source, including carriage up to 5 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm
Supply, Installation, Testing and Commissioning of electric driven, Centrifugal or Submersible type, single/multistage, end suction type, centrifugal/submersible pump of cast iron body, C.I impallers with carbon steel shaft & mechanical seal directely coupled with TEFC SQ cage foot mounted type induction motors suiitable for operation on 3 phase, 415 volts 50 Hz AC supplywith IP 55 protection for enclosurewith F class insulation confirming to IS: 325 includingcommon base frame fabricated from min. 75X50 mm M.S channel, coupling with guard foundation bolts, pressure gauge, anti-vibration pads, cement concrete foundation etc. complete in all respect as required or as directed by engineer incharge. Make:PEW/Kirloskar-Main fire pump
Supply, Installation, Testing and Commissioning of electric driven, Centrifugal or Submersible type, single/multistage, end suction type, centrifugal/submersible pump of cast iron body, C.I impallers with carbon steel shaft & mechanical seal directely coupled with TEFC SQ cage foot mounted type induction motors suiitable for operation on 3 phase, 415 volts 50 Hz AC supplywith IP 55 protection for enclosurewith F class insulation confirming to IS: 325 includingcommon base frame fabricated from min. 75X50 mm M.S channel, coupling with guard foundation bolts, pressure gauge, anti-vibration pads, cement concrete foundation etc. complete in all respect as required or as directed by engineer incharge. Make:PEW/Kirloskar-Jockey pump 450 LPM, 35 M head
Non -Scheduled item Providing and fixing Paneles Door Frame 12 mm Ply wood (Green/Optima/Red) , Veneer fininsh with all taxes and royalty all complete as per E/I.
Both Side Laminated Door Shutter with all Door Closed, motish Lach and Lock. Brass Fitings all Complete with Handels and Required Accessories
Corridor and Toilet Falce Celing (Aluminum Falce Ceiling) middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
Providing & fixing in position 25 mm thick bituminastic board (shalitex or equivalent as per IS 1838-1983) in expansion or construction joints in barrage and its allied works as per specification and direction of E/I
Supplying and laying wallpaper of approved make, in all colours, texture & shades,make over old surface including washing, cleaning and preparing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of E/l.
Supplying Fitting Fixing all height Wall paneling with 12 mm Plywood (Green/Optima/Red) over 2"x1" aluminum Section , 6 mm thick waterproff Veener and Polish fininsh with all taxes and royalty all complete as per E/I
Advanced New Generation ESE (Early Streamer Emission) Air Terminal Lightning Conductor -:Supply, installation, fixing, fitting, testing and commissioning, of advance new generation early streamer emission technology lightning arrester of type DMSGI-45 with Level-1 protection of 63m radius. Device is confirming to standard NF C 17-102. Device shall be mounted at least 5 meter clear to highest point by support-mast of 40 mm dia GI pipe duly galvanized with minimum 85 micron zinc coating with foundation to suit mast, for Level 1 protection of 63 m (as per NFC 17-102 & IEC 60-1:1989.) radius with accessories complete as required for all other structures and designated open spaces covered by general area lighting mast on which ESE (Early Streamer Emission) can be installed similar to OPR 30 with active system. The Insulation material used to electrically isolate the panels shall be comprised of a base polymer which provides high ozone & UV resistance with di-electric strenght of 24-38 kV/mm tested as per NFC 17-102 & IEC 60-1:1989. The ESE terminal shall not contain any electronic circuits or any moving parts for its operation. The ESE terminal shall be tested & certified by CPRI (Central Power Research Institute, Govt of India) for the Impulse current of 45 kA (8/20 micro sec) with 5 positive & 5 negative impulse. The ESE (Early Streamer Emission) terminal shall be approved by DGMS (Director General of Mines Safety), Govt of India. Make:- Allywell/Paratonex/Altec Corporation/Ingesco.-The above advanced New Generation Lightning Arrester with ESE Technology consist of following items:- Air Terminal:- Providing of Early Streamer Emission Air Terminal made of pure Stainless Steel grade A316 double layer (DIN 4301)-Mast:- Providing of Extension support Mast made of 40 mm dia class A GI Pipe duly galvanized with minimum 85 micron zinc coating with foundation to suit Mast, for Level 1 protection of 63 Mtr. radius (as per NFC 17-102 & IEC 60-1:1989.), with accessories complete as required for all other structures like couplers, guywires to fix the mast to the building /structure at highest point such that the Air terminal is 5 meters above the tallest structure including supporting 1.25 m FRP Mast. (as per NFC standard)and properly secured in a vertical position. ,Lightning Flash Counter :- Poviding fitting fixing and testing of Lightning Flash Counter (Search / Strike counter) (6 Digit Display) , suitable for 10kA- 100kA (250A) to be installed on one of the down conductors approximately 5 Mtr. from the ground level. It registers every lightning discarage intercepted by the air terminal as direct lightning protection.,Testing Joints:- Poviding, fitting, fixing of testing joints to be located just below the lightning counter on the down conductor from the earthing system in order to faciliate periodical checking of earthing resistivity.,Protective Sheath :- A 3 inch dia approximately 3 Mtr long plastic pipe is fitted at the ground level to prevent accidental shocks to human beings/animals during a lightning discharge..The product specifications of above EARLY STREAMER EMISSION LIGHTNING CONDUCTOR SYSTEM shall be as follows :- Material - Stainless Steel 316 (DIN 4301),Weight - 2.9 Kgs.,Length- 55cm (including the rod).,Width - 12.5 Cm.
TRIPOD Earthing System for ESE technology Lightning Conductor- (3 Nos. for per set):-Supply, installation, fitting and fixing of 16mm dia, molecularly bonded with copper on mild steel 2.4 Mtr. Long (6 Nos.) as vertical copper electroded imbedded into three separate earth pits and joined at the top as per Crow Feet or Delta Configuration by three Nos. Clamps, and digging, earth cutting and refilling of earth up to 600mm below ground level, Chemical compunds called 'TEREC' is mixed with soil etc. for tripod maintainance free Easrthing system for ESE Technology Lightning Conductor This includes supply and irrection of Earthing Electrodes with earth enhancing chemical compound for Tripod Earthing System for ESE technology Lighning system. .( This chemical comound for per set consit of 5 Kg. CRIC (6 Bags).,6 set-1.2 met copper bonded earth rod. Model-RB-305: 6 set.3 set-Clamp to join 2no. 1.2 met copper bonded earth rod. Model-CG370-3set,3 set-Rod to tape (25mmx3mm) clamp. Model-CR105: 3 set,3 set-Earth enhancing soil treatment compound TEREC+ having essential chemical ingredients, such as ionic chemicals, dispersion chemical, diffusion chemical, expansion chemical and hygroscopic chemicals, to provide stable low resistance for earth terminal to make it maintenance free for over 15 years . Model-Furse CEM,1 set-Supply fitting and fixing of 1 NO. heavy duty Polyplastic earth pit cover (HDPE) per Set. Model- PT205
HT Cable 3CX 95 sq mm(E) :Providing and fixing Brand Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, 11kV(UE), voltage grade, XLPE Insulated, Insulation Screening with extruded Semi Conducting Compound in combination with Copper Tape, cores laid up, innersheath of PVC tape, galvanised flat steel strip armoured and overall PVC Sheathed Cable conforming to IS 7098 / (PART-II) 1985 with latest amendments.( Make-Havells/ Polycab/Phinolex/KEI/ R kable/Mescab)-3 Core 95 Sq.mm. 11kV(E)
500 kVA OUTDOOR TRANSFORMER(Energy Efficient Level 2):- Supply, fitting, fixing, commissioning and testing of 500 kVA ,11/0.433 kV Deta/Star, vector group DYn11, outdoor mounting, Oil Cooled Type ONAN off circuit Star Rating Transformer with copper wound Transformer. The cost of Transformer includes civil foundation work as per as per IS:1180. The civil foundation work (making a 150 mm RCC Platform, 500 mm above ground level, size of platform 8' (W) X 8' (L) X 6" (Thick) on 4 Nos. 10"X10" RCC columns, shunk 4 ft deep in ground and then earth filling ( compacted as required) along with required size & length of MS channels as per the norms of 500 kVA outdoor Transformer with all accessories as per IS:1180, air filled cable box on both ends (HT & LT) and accessories as per General Specifications of N.E.C. / I.E.R. and should have suitable arrangement for 11KV 1 Run, 3 Core 95 Sq mm XLPE Al. Ar. Cable and LV termination box shall have suitable Bus arrangement for 1.1 KV, 2 Runs, 3.5 Core, 300 Sq mm XLPE Al. Ar. Cable etc as required. (Make:- GTB/ Kirloskar / GE/Crompton .)-Inspection of above 750kVA Transformer shall be carried out by the consultant at company's factory and for the all arragements shall be provided by the suppllier.Apart- from the above standard fittings followings items should be included:--Capacity- 500 kVA,Installation - outdoor,Duty- Continuous,Windings-EG copper,Core-CRGO,Tapping- Off circuit changer shall be provide on HV winding in +5% to 10% in steps of 2.5%,Cooling - ONAN,Temp. rise @ 50 Deg. C. Ambient ,Oil by Thermo Meter :- 50 Degree C. ,In winding by Resistance :- 55 Degree C.,HV side voltage withstand test-28kV,LV side voltage withstand test-3kV,% impedence at 75 0C : 5%,,Mounting of cooling withstand test-Detachable,Terminal Arrangement:-i) HV side- Bare Bushing,ii) LV side - Cable Box with AL bus bar,iii) Neutral to be provided,Standard Fittings:,i) Name plate, Rating, Diagram plate,ii) Earthing Terminals, Lifting Lugs,iii) Oil level Indicator, Filter Valve with plug, Drain cum Sampling Valve,iv)Conservator with Oil filling hole, Thermometer pocket, Air Release Plug,v) Dial type Oil Tem. Indicator, Explosive Vent, Unidirectional Wheel,vi) First filling of Transformer Oil Conforming to IS:335,vii) Bucholtz Relay, Marshaling box,,viii) Winding Tem. Indicator,ix) Oil Tem. Indicator
11 kV HT Distribution Board with VCB: Supply, installation, testing and commissioning of 4 panel indoor panel comprising of 1 incomer 400A, 250MVA, VCB, CT ratio: 300-150/5-5A, and 3 nos outgoing 400A, 250 MVA, VCB CT ratio: 300-150/5-5A-Incomer VCB-400A-1 nos ,Outgoing VCBs-400A- 1 no,All other accessories including protection and others necessary items required to complete the panel
A.P.F.C. Panel (Capacitor Bank) Auto Mannual Type (APFC) Panel–150 kVAR Capacitor Bank Details with mixed dielectric Ultra Heavy Duty Capacitors of following range :- Supplying, designing, manufacturing, installation, testing and commissioning in correct alignment position, effecting proper connection of all incomer and outgoing of A.P.F.C. Panel (Capacitor Bank / Auto Mannual) of 14 SWG CRCA sheet (2 mm) steel IP–43 floor mounting cubical type capacitor bank panel suitable for operation on 415V, 50Hz, 3 Ph. AC supply and fault level 50kA with approximate size : 2,600 mm (H) x 2,700 mm (L) x 800 mm (W) with front operated construction including separate fabrication arrangement for fixing MCCB, M.C.B, Capacitors, Contactors etc.The sheet steel under go minimum 7 tanks treatment followed by finishing powder coating of minimum 60 micron thickness duly compartmentalized with locking arrangement duly fixed on Base Channel with proper lifting arrangement size – 50 mm x 50 mm x 6 mm having accessories mounted inside the cubical panel, earthing with 2 Nos. earth studs and Capacitors having earthing arrangement.-All openings shall be covered by soft rubber gasket, enclosure shall be galvanized.,The panel shall have type test certificates with short circuit and IP protection (C.P.R.I. Test), Note:- Stages inspection of APFC Panel shall be carried out by Engineering Incharge / Consultant (Eletcrical) at panel builder site and for that, all arragements shall be made by the suppilier on prior information to parrent department., Aluminum Bus Bar for Panel :-Bus bar shall be suitable for 500A, TPN busbar chamber of suitable length with (E91EWP) Eletrolytic Aluminum busbars. All busbars and interconnections shall be of suitable size Aluminum busbar, current density of Aluminum shall not be more than 0.8 Amps/sq.mm cross sectional area of Bus Bar with removel gland plates, cable glands, at sending and receiving ends, encluding connections with outgoing feeders complete in all respect and all interconnections shall be made with 2.5, 4 and 6 sq.mm. PVC Cu.wire. Cost of Enclosure with Al bus bar, connection PVC wires, etc. The Aluminium bus bar shall be with heat shrinkable PVC Slived Red,Yellow,Blue & Black as (RYB & N ) after temperature and incloser derating maximum allowable temp.of bus bar shall be 90 0 C. , SLD will be submitted by the contractor for approval to Engineering Incharge/Consultant before submitting the APFCR Panel drawing. Based on approved SLD,contractor will provide the GA drawing of APFCR Panel. Inspection of the APFCR Panel shall be carried out by the Panel Builder in presence of Consultant before final delivery,Note:- Stage Inspection of APFCR Panel shall be carried out by Engineering Incharge / Consultant (Eletcrical) at panel builder site and for that, all arrangements shall be made by the suppilier on prior information to parent department and the consultant.,APFCR Panel & busbar system, in CRCA Sheet Steel enclosure (IP-43) without any components (A),Location : LT Panel Room.-Make of MCCB - L&T D-Sine/ Legrand DPX³ / Schneider-NSX / Siemens - 3VL,Make of MCB - L&T/ Legrand/ Schneider / Siemens (D Series MCB of 10kA),Bill of Material in A.P.F.C.R. Panel :- 16A TP / MCB / 10kA (D tripping characteristic) for 7.5 kVAR Capacitor. 40A TP / MCB / 10kA (D tripping characteristic) for 20 kVAR Capacitor. 63A TP / MCCB / 16kA with thermomagnetic release based for 25 kVAR Capacitor. ,6A - DP MCB ,6A - 4P MCB ,6A - SP MCB ,1 no- 400A FP/ 415V, 4P/36kA MCCB with thermo-magnetic based released type with O/L, S/C protection with adjustable current with spreader links and extended rotary handle. ,Indication:- Digital Am-meter, three phase,Digital Volt-meter, three phase,CT 400/5VA -5 class one Epoxy resin cast CT (3 Nos.)=1 Set. Make:-Kappa / Matrix ,LED Indicators sets R.Y.B. (220V) (R–15 / Y– 1/ G – 1 = 17 Nos.) self illuminated Red-Green (ON-OFF) push buttons, each backed up with MCB shall be provided for each capacitor unit to indicate the status of the unit. Make-L& T./ AE/ Schneider.,LED indicatore (RYB) of 220V. 1 Set. Make- Legrand / L&T / Rishabh (R Y-& B) with 2A SP MCB protection. ,16A–2 pole / 2 way Rotary Switch. Make:- Legrand / L&T /Reputed,10A Toggle Switch SP–HT .Make:- Legrand / L&T / Reputed,Power factor correction Intelligent controller Relay with 14 steps and multi -functional display , APFCR with 14 steps. The relay shall be sensitive to pick up 1% of rated current and correct the P.F accordingly. Also the relay shall display the harmonic level of system. Make- L& T, Seimens.,VAF + Power Factor, 3Ph, Class 1, 5A, CAT. No. WDV303FC000, Meter Make- L & T/Seimens,Auto Mannual Type (APFC) Panel – 150 kVAR 14 Stage Capacitor Bank Details with following parameters :-1. MPPXL ,440V/50Hz,TP Shunt mixed dielectric heavy duty Capacitor. 2 Lower operating losses - 0.35W/KVAr).,3. Over current withstand capability - 1.8 times rated current. ,4. Inrush current withstand capability - 300 times rated current. ,5. Operating Life- 130000 hours.,6. Numbering of switching- 8000 operations per year. ,7. Insulation Class H.,(25 x 3) x 1 Set = 75 KVAR (Power Capacitor) Heavy Duty. Make:- Legrand/ L&T / Schneider -Meher,(20 x 3) x 1 Set = 60 kVAR (Power Capacitor) Heavy Duty. Make:- Legrand/L&T / Schneider -Meher,(7.5 x 2) x 1Set = 15 kVAR (Power Capacitor) Heavy Duty. Make:-Legrand/ L&T / Schneider -Meher.,Total - 150 kVAR,Capacitor Duty Contactors :- ,2 No.for7.5 kVAR – MOC 15 1NO & 1 NC (25A)Make:- Seimens / L&T ,3 Nos. for 20 kVAR – MOC 20 1NO & 1 NC (32A) Make:- Seimens / L&T,3 Nos.for 25 kVAR –MOC 25 1NO & 1 NC (40A) Make:- Seimens / L&T,1 No. 20 kVAR for fixed Capacitor Bank with all required accessories like 40A FP MCCB thermo-magnetic release, capacitor,contactor, MCB, indicators etc.shall be fixed capacitor to take care of the no load losses of the transformer
Chemical Earthing-Supply, erection and commissioning & testing along with earth cutting, digging earth filling for chemical earthing of the building . Soil Treatment-Earth enhancing soil treatment compound TEREC + having essential chemical ingredients, such as ionic chemicals, dispersion chemicalhydroscopic chemicals to be provide stable low resistance for earth terminal to make it maintenance free for over 15 years. Also provision of masonary enclosure 300mmX300mm withCI cover plate having locking arrangement as earth chamber,Specification:-Polution free earthcon compound-25kgs,Electrode-2m long, 17mm dia with 250 micron molecularly bonded with copper coated.,HDPE earth pit cover
SITC of Layer true Layer 3 Switch with 24 x 100/1000 BaseX, SFP,MACsec,4 x 1/10G SFP+, MACsec,4 x 10/25G SFP28, MACsec,USB port- 1,Out-of-band EMP port- 1,RS-232 port -1,Console port (micro-USB)- 1,Operating temperature 0°C to 45°C (32°F to 113°F),Air flow Front-to-back, with All true L3 features ,Max raw fabric capacity(Aggregated)-960 Gb/s,Switching capacity(Aggregated)-728 Gb/s,Throughput-803.5 Mpps,File system flash- 16 GB,DRAM-4 GB,VLANs- 4,000,MAC addresses- 64 K,Jumbo frames-9216 bytes,1+1 redundant, hot-swappable, load-sharing power supplies, Preferred Make- CISCO/ALCATEL-LUCENT/ALLIED TESLESIS/JUNIPER
SITC of Layer 2 Fully Manageable Network Switch consists of 24 X 1G RJ-45 Copper Ports+2x 1G RJ-45/SFP Combo+ 1G RJ-45/SFP+2x1G SFP uplink upgradable to 10G SFP+ Uplink with Fanless Design and internal Power Supply,1 Console Port, 1 USB Management Port,CPU 800MHz ARM v7,File system flash 1 GB,RAM 1 GB, Switching capacity-92 Gb/S,Throughput-67 Mpps, Operating Tempreture- Min-0°C to 45°C (32°F to 113°F), Humidity(Operating)- 5% to 95% non-condensing, CE,FCC,UL, RoHS Certified,Layer-2 switching- Up to 16k MAC addresses, Up to 4000 VLANs, Up to 1.5k total system policies, Latency: < 4 μs, Max frame: 9216 bytes (jumbo),Priority queues: Eight hardware-based queues per port for flexible QoS management,Bandwidth management: Flow-based bandwidth management; ingress rate limiting; egress rate shaping per port, Queue management: Configurable scheduling algorithms — Strict Priority,Queuing (SPQ), Weighted Round Robin (WRR), IGMPv1/v2/v3 snooping to optimize multicast traffic, Multicast Listener Discovery (MLD) v1/v2 snooping, Up to 1000 multicast groups, Network Protocols-DHCP,ARP.UDP, Should support- Virtual Chassis (VFL): Link/activity ; Warranty- 1 year, Preffered Make- Cisco/Allied Telesis/Alcatel -Lucent/Juniper
SITC of POE+ Layer 2 Fully Manageable Network Switch consists of 24 X 1G RJ-45 Copper Ports+2x 1G RJ-45/SFP Combo+ 1G RJ-45/SFP+2x1G SFP uplink upgradable to 10G SFP+ Uplink with Fanless Design and internal Power Supply,1 Console Port, 1 USB Management Port,CPU 800MHz ARM v7,File system flash 1 GB,RAM 1 GB, Switching capacity-92 Gb/S,Throughput-67 Mpps, Operating Tempreture- Min-0°C to 45°C (32°F to 113°F), Humidity(Operating)- 5% to 95% non-condensing, Should support IEEE 802.3af, IEEE 802.3at, or 802.3bt compliant end device, Configurable per-port PoE priority and max power for power allocation, Dynamic PoE allocation: Can be configurable to deliver only the power needed by the powered devices (PD) up to the total power budget for most efficient powern consumption, POE Budget min 375 Watt, CE,FCC,UL, RoHS Certified,Layer-2 switching- Up to 16k MAC addresses, Up to 4000 VLANs, Up to 1.5k total system policies, Latency: < 4 μs, Max frame: 9216 bytes (jumbo),Priority queues: Eight hardware-based queues per port for flexible QoS management,Bandwidth management: Flow-based bandwidth management; ingress rate limiting; egress rate shaping per port, Queue management: Configurable scheduling algorithms — Strict Priority,Queuing (SPQ), Weighted Round Robin (WRR), IGMPv1/v2/v3 snooping to optimize multicast traffic, Multicast Listener Discovery (MLD) v1/v2 snooping, Up to 1000 multicast groups, Network Protocols-DHCP,ARP.UDP, Should support- Virtual Chassis (VFL): Link/activity ; Warranty- 1 year, Preffered Make- Cisco/Allied Telesis/Alcatel -Lucent/Juniper
SITC of 8 RJ-45 autosensing 10/100/1000 POE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 fixed Gigabit Ethernet SFP ports 1 dual-personality (RJ-45 or USB micro-B) serial console port, POE Power-67 W; Preffered Make- Cisco/Allied Telesis/Alcatel -Lucent/Juniper
SITC of Wireless Controller Software along with license for 20 Access Points to be installed on the industry standard Server/workstation PC or Hard controller; (Preffered Make- Cisco/Allied Telesis/Alcatel -Lucent/Juniper/Cambium)
SERVER -Intel Xeon Silver 4310 2.1G, 12C/24T, 10.4GT/s, 18M Cache, Turbo, HT (120W) DDR4-2666 with max memory slots of 16 DIMMS,1X16GB RDIMM,2.5" Chassis with up to 8 Hot Plug Hard Drives,1.2TB 10K RPM SAS 12Gbps 512n ,PERC H 755 Conroller,iDRAC9,Enterprise,Dual, Hot-plug, PSU (1+1), 800, Mixed Mode,3YR ProSupport Next Business Day , loaded with Microsoft Windows NT proffesional Server edition 2022 and 19.5 inch TFT Full hd Display, Wireless Keyboard and Mouse; Preffered Make-DELL/HP/Lenovo
SITC of Single Mode SFP Module with Data rate minimum 10/100/1000 MbpS to be used in the switch for uplink purpose and switch and module should be from the same OEM and should provide the OEM certification for genunity of the product.;(Preffered Make- Cisco/Allied Telesis/Alcatel -Lucent/)
6 Port LIU Switch : SITC of 6 Port Loaded LIU with SC Unit for 6 SM fiber Single mode fibres (9/125 µm) (1 Nos. of Loaded Duplex adapter with Adapter plate) along with 1 Pc of Splice Tray - 6 Fiber Capacity & 1 Nos. of Blanking Plate Blanking plate for 19" panel - Black & 6 Nos. of SC Pigtail - Pigtail 1 Meter (9/125 µm) Single Mode (Make:Legrand/Panduit/Ortronics )
24 Port LIU : SITC of 24 Port Loaded LIU with SC Unit for 24 SM fiber Single mode fibres (9/125 µm) (4 Nos. of Loaded Duplex adapter with Adapter plate) along with 4 Pc of Splice Tray - 24 Fiber Capacity & 24 Nos. of SC Pigtail - Pigtail 1 Meter (9/125 µm) Single Mode (Make:Legrand/Molex/Panduit/Ortronics )
SITC of Fiber Duplex Patch Cords SC-LC Patch Cord 2 mtr. (Make:Legrand/Molex/Panduit/Ortronics )
SITC of 6-Core SM Armoured Fibre Optics Cable in Mtrs: (Make:Legrand/Molex/Panduit/Ortronics )
Splicing of Armoured SM/MM Fibre Optics Cable: Splicing, testing and commissioning of supplied, OFC cable of 6-Core Armoured Fibre Optics
SITC of Fully Loaded 15U 19" 600*600 Wall Mounted Rack with all required accessories -2 Nos. of Fan,6A 6 Plug PDU-1 Nos. ,Cable Manager-2 Nos., Mounting Screws-20 Pcs ; Preffered Make-Legrand/APW/President/Valrack
SITC of 24 port UTP jack panel (24 port RJ-45 Loaded CAT-6 UTP 19" rackmountable patch panel preferbaly with 6 blocks). Preffered Make-Legrand/Molex/Panduit/Ortronics
SITC of Straight LAN Patch Chord-2 Mtr Preffered Make-Legrand/Molex/Panduit/Ortronics
SITC of Straight LAN Patch Chord-1 Mtr Preffered Make-Legrand/Molex/Panduit/Ortronics
SITC of white modular plate type Single front plate for 1 Nos. RJ 45 Data outlet Preffered Make-Legrand/Molex/Panduit/Ortronics
SITC of RJ 45 Data Module to be fixed on face plate Preffered Make-Legrand/Molex/Panduit/Ortronics
SITC of 5MP Fixed Lens Network Bullet Camera with following Technical Specifications; Preffered Make: Honeywell/Bosch/Hikvision/Pelco/Sony-Specification-1/2.7'' Progressive Scan CMOS,Color: 0.003 Lux @ (F1.4, AGC ON), B/W: 0 Lux with IR,5MP (2592x1944) or better,IR Cut Filter,1/3 s to 1/100,000 s,3D DNR,120dB True WDR or better,4mm,40m IR or higher,Should Support quad video streams or better,H.265,H.264, H.264+,H.265+,MJPEG and Main stream supports H.264+/H.265+,G.711ulaw/G.711alaw/G.722.1/G.726/MP2L2/PCM/MP3,BLC, HLC, 3D DNR, EIS, Defog,ROI,(5 fixed regions for main stream and sub-stream).,Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser,Day, Night, Auto, Schedule,TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, IPv4, IPv6, UDP, Bonjour, SSL/TLS, PPPoE, ARP, SNMP,Open Network Video Interface (PROFILE S, PROFILE G, PROFILE T),ISAPI.,6 channel,32 users. 3 user levels: administrator, operator and user,Password protection, complicated password, HTTPS encryption, IP address filter, Security Audit Log, basic and digest authentication for HTTP/HTTPS, TLS 1.2, WSSE and digest authentication for Open Network Video Interface, memory card encryption.,Built-in memory card slot, support microSD card, up to 256 GB,Motion detection, video tampering alarm, Line crossing detection, intrusion detection,scene change detection, video quality diagnosis.,Notify surveillance center, trigger recording, trigger capture, send email, audible warning,network disconnected, illegal login.,1 x RJ45 10M/100M Ethernet port,1x input, 1x output,DC12V, PoE (802.3af), -30° C ~ + 60° C,IP67,CE, FCC, UL,BIS.
SITC of 5MP Fixed Lens Network Dome Camera with following Technical Specifications; Preffered Make: Honeywell/Bosch/Hikvision/Pelco/Sony-Specification,1/2.7'' Progressive Scan CMOS,Color: 0.003 Lux @ (F1.4, AGC ON), B/W: 0 Lux with IR,5MP (2592x1944) or better,IR Cut Filter,1/3 s to 1/100,000 s,3D DNR,120dB True WDR or better,4mm,40m IR or higher,Should Support quad video streams or better,H.265,H.264, H.264+,H.265+,MJPEG and Main stream supports H.264+/H.265+,G.711ulaw/G.711alaw/G.722.1/G.726/MP2L2/PCM/MP3,BLC, HLC, 3D DNR, EIS, Defog,ROI,(5 fixed regions for main stream and sub-stream).,Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser,Day, Night, Auto, Schedule,TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, IPv4, IPv6, UDP, Bonjour, SSL/TLS, PPPoE, ARP, SNMP,Open Network Video Interface (PROFILE S, PROFILE G, PROFILE T),ISAPI.,6 channel,32 users. 3 user levels: administrator, operator and user,Password protection, complicated password, HTTPS encryption, IP address filter, Security Audit Log, basic and digest authentication for HTTP/HTTPS, TLS 1.2, WSSE and digest authentication for Open Network Video Interface, memory card encryption.,Built-in memory card slot, support microSD card, up to 256 GB,Motion detection, video tampering alarm, Line crossing detection, intrusion detection,scene change detection, video quality diagnosis.,Notify surveillance center, trigger recording, trigger capture, send email, audible warning,network disconnected, illegal login.,1 x RJ45 10M/100M Ethernet port,1x input, 1x output,DC12V, PoE (802.3af), -30° C ~ + 60° C,IP67,CE, FCC, UL,BIS.
SITC of PTZ Camera: Sensor :-1/1.9’’ Progressive Scan CMOS,Optical Zoom:-Minimum 23x or better,Digital Zoom:-Minimum 12X or better,Resolution:-Minimum 1920 X 1080 or better,Min. Illumination-Color: 0.002 lux @ (F1.5, AGC ON), B/W : 0.0002 lux @ (F1.5, AGC ON), 0 lux with IR,Lens:-5.9-135.7mm, 23x,Wiper-Wiper Support,Video Compression:-H.264/MJPEG,Wide Dynamic Range-120dB,Multi Streaming-Camera should support Multi streaming,Supported Protocols:-IPv4/IPv6, HTTP, HTTPS, 802.1X, QoS, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTP, TCP, UDP,IGMP, ICMP, DHCP, PPPoE,Network Interface:-10Base-T / 100Base-TX, RJ45 connector,Network Interface:-10Base-T / 100Base-TX, RJ45 connector,PAN & TILT Range:-Pan:360° endless; Tilt: -20°~90°,Simultaneous Live View-Up to 20 users,Protection Level:-IP66, IK10, TVS 6,000V lightning protection, surge protection,Alarm Trigger-Smart tracking when patrol between multiple scenarios,Face detection, intrusion detection, line crossing detection, audio exception detection, region entrance, region exiting detection,Smart detection-Face detection, Intrusion detection, Line crossing detection, Audio exception detection, Region entrance detection, IR Range:-Upto 150 Meter or Better,Certification:-FCC,CE,UL,Housing:-Vandal Proof ( IK 10 or better),ONVIF-Camera should be ONVIF Compiled,Enhancement-3D DNR,HLC, EIS, Defog,Power:-High-PoE&24 VAC, Max.60W,Humidity:90% or better,Temperature:-Minimum -40°C ~ 65°C (-40°F ~ 149°F), Preffered Make-Hikvision/Axis/ Pelco
SITC of 8 TB Surveillance Grade Hard Disk for NVR for 30 Days Back up; Make-Seagate/WD
55" 4k LED Panel,Preffered Make-LG/Samsung
SITC of EPABX SYSTEM: IP based 100% non-blocking EPABX System should be a IP Compatible with rich feature set of the system and can be connected with pure Voice over IP (VoIP) communication network across corporate Local and Wide Area Networks (LAN and WAN) as & when required. Central Processing Unit: The system main software should be open architecture based. The CPU of main system shall be 32 bit processor working at 2.0 GHz or better. The system should be Wall mountable. • System Architecture should be latest pure IP and should be wall Mountable Meet-me conference 30 party X 2 from day 1 must be available. Must Support Unified Communications Equipped with 72 Analog Extensions expandable upto 384 Extensions,8 Analog Trunk Ports, 1 PRI with 1 IP Phone to be Used as Opertor Console with 6DSS Keys, 02 Ports Auto Attendant,EPABX Make: Avaya/NEC
Analog Basic CLI Push Button Telephone: SITC of analog telephone- Make: Panasonic/ BPL/Beetel
SITC of Telephone Tag Block): IP-65( weather proof). Preffered Make-Krone
50 pair krone Box fully loaded without IPM
200 Pair krone Box fully loaded without IPM
SITC of multi-core telephone Unarmoured PVC cables of conductor size 0.5 sq.mm annealed tinned electrolite grade copper , PVC insulated twisted pairs bunch togeather over all PVC sheathed , Laid on tray or along the wall or laid in pipes or in trenches including excavation of cable trench, sand filling covering with bricks and back filling complete as required. Make: Polycab/ Finolex/ Deltron/Havells/Anchor/Molex/Schenider-20 Pair
Supply, fitting, fixing, commissioning and testing of 35 Sq. MM Copper Conductor Multi strand PVC Sheilded FRLS Wire with suitable Copper LUGS for Battery Interconnection and suitable 50 Sq. mm copper wire of 4 length of 10 mtrs each for UPS to Battery excluding cable from PANEL to UPS and UPS to panel. Make- Polycab/Havells/KEI
Chemical Earthing-Supply, errection, fitting, fixing, commissioning and testing along with earth cutting, digging, earth refilling for chemical earthing of the building except G.I. Strips (25mmX5mm) Each earth pit has to be tested with earth tester 1000 V/1000 Ohms & the test report has to be submitted by the contractor to the department after certification of the same by the consultant. The above chemical earthing includes the provision of masonary enclosure and HDPE Earth Pit Cover 300mm X 300 mm (Under-floor earth inspection pit) having locking arrangement as earth chamber.The above chemical earthing includes the following items (3 Mtr Earthing) ,Each chemical earthing shall have following details:- ,Supply of Pollution free Earthcon Compound 4 bags of 25 Kg each ,Supply of 17.2 mm dia, 250 micron,molecularly bounded copper coated 3 Mtr long electrode. Tested as per IEC 62561-2. Meets the requirement of IS 3043 & IEC 60364-5-54. Tested for short circuit withstanding capacity. High Tensile strength. (UL Listed).,Supply of Stainless Steel "U" Bolt Clamp,Supply of HDPE Earth Pit Cover for earth chamber (Capacity of 5 ton)
SITC of HDMI bidirectional RS232 and IR over high definition base1, Make-Kramer/Crestron/ Key digital
SITC of HDMI bidirectional RS232 and IR over high definition base1, Make-Kramer/Crestron/ Key digital
SITC of Passive wall plate Comprising of HDMI, Make-Kramer/Legarnd or equivalent
55" 4k LED Panel for Conference Halls with Swival Mount Base,Preffered Make-LG/Samsung
Supply, Installation & Commissioning of POLYCOM RealPresence Group 500-1080p: Group 500 HD codec, EagleEyeIV-12x Full HD 1080p camera, mic array, univ. remote, NTSC/PAL. Cables: 2 HDMI 1.8m, 1 CAT 5E LAN 3.6m, 1 HDCI digital 3m, Power: UK-Type G, BS 1363.
SITC of Mixer 6 channel Analog Mixer suitable for the prescribed solution Make-Souncraft/AKG/Yamaha/Bosch/BOSE ;
Providing of Corded Digital Deligates Units Gooseneck microphone with programmable switch . With Specifications such as: Frequency response:200 Hz to 12.5 kHz. -Headphones load impedance:> 32 ohms < 1k ohm, -Loudspeaker nominal output:72 dB SPL, - Length of microphone :480 mm (18.9 in), - Plug and play functionality for ensuring fast installation and reconfiguration times , Immunity to mobile phone interference and with Features such as: Possible-to-speak indication, Request‑to‑speak indication, Built-in loudspeaker with volume control, Built‑in 3.5 mm (0.14 in) stereo headphones socket, Built‑in volume control for headphones, Color-coded LED indicator above microphone button, for showing the following states: microphone on, request‑to‑speak, and possible‑to‑speak, Immunity to mobile phone interference Make & Model is: Bosch- CCSD-DL./Harman/BOSE
Providing of Corded Digital Deligates Units Gooseneck microphone with programmable switch With Specifications such as: Frequency response:200 Hz to 12.5 kHz. -Headphones load impedance:> 32 ohms < 1k ohm, -Loudspeaker nominal output:72 dB SPL, - Length of microphone :480 mm (18.9 in), - Plug and play functionality for ensuring fast installation and reconfiguration times Immunity to mobile phone interference and with Features such as: Possible-to-speak indication, Request‑to‑speak indication, Built-in loudspeaker with volume control, Built‑in 3.5 mm (0.14 in) stereo headphones socket, Built‑in volume control for headphones, Color-coded LED indicator above microphone button, for showing the following states: microphone on, request‑to‑speak, and possible‑to‑speak, Chaiman Button Make & Model is :Bosch- CCSD-DL./ Harman/BOSE
Providing of Digital central conference controller with Built‑in MP3 recorder with internal memory and USB recording, Built‑in Digital Acoustic Feedback Suppression, Quick and easy connection upto 80 discussion devices, Native support for automatic HD camera control, Signal to noice :> 94 dBA, Frequency response for input :30 Hz to 20 kHz, Recording/ Playback (bit rate):64, 96, 128, 256 Kbit/sec, Nominal loudspeaker output:72 dB SPL and Functions such as: Plug-and-play functionality, Web browser control, Open microphone control, Built-in MP3 recorder, Discussion control Make & Model is: Bosch-CCSD-CURD/ Harman/BOSE
Providing of Digital central conference controller with Built‑in MP3 recorder with internal memory and USB recording, Built‑in Digital Acoustic Feedback Suppression, Quick and easy connection upto 80 discussion devices, Native support for automatic HD camera control, Signal to noice :> 94 dBA, Frequency response for input :30 Hz to 20 kHz, Recording/ Playback (bit rate):64, 96, 128, 256 Kbit/sec, Nominal loudspeaker output:72 dB SPL and Functions such as: Plug-and-play functionality, Web browser control, Open microphone control, Built-in MP3 recorder, Discussion control Make & Model is: Bosch-CCSD-CURD/ Harman/BOSE
SITC of wall mounted cabinet speaker 30 Watt includes mounting system Dual 4" 2‑Way Surface-Mount Loudspeaker,Compact full range,Ideal for Conference Halls, patios, and retail,Vented LF enclosure,1-inch titanium diaphragm HF driver with neodymium magnetic structure,Coherent Coverage Waveguide,Full-bandwidth overload protection (LF and HF),Elliptical weather-resistant ABS enclosure,Paintable black or white finish,Magnetically shielded for video applications,Strong-Arm Mount™ for easy, flexible aiming,"T" version for 70 or 100 V distributed systems with specifications of Frequency Range (-10 dB)- 65 Hz – 20 kHz, Sensitivity (SPL, 1 W/1 m)- 89 dB,Max. SPL/1m (calc.)- 115 dB,Power Handling (Continuous, Peak)- 100 W, 400 W,Transformer taps(transformer version only)- 70 V: 3.75 W,70 V/100 V: 7.5, 15, 30 W, Coverage, H x V- 120° x 80°, LF Transducer-Two 4", HF Transducer -1", Nominal impedance-(non-transformer version)- 8 Ω, Dimensions (H x W at front x D) -12.2" x 6.9" x 8.5",(310 x 175 x 216 mm) ; Make- AKG/BOSE/EV
SITC of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz (Approved Makes: Audio Technica, Senheiser, Electro-Voice/AKG)
SITC of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz (Approved Makes: Audio Technica, Senheiser, Electro-Voice/AKG)
SITC of required cables & Accessories for Hall
6u Network Equipment Rack 600X 600 with power socket, amplifier support, exhaust fan, Tray etc.Prefrred Make- Valrack/Rittal/President
SITC Speaker Cable 2 core 2.5 Sqmm PVC coated and PVC sheathed multistrand copper flexible unarmored FRLS cable; Make-KRYSTAL/Polycab
Mic Cable-Supply of 0.75 Sq. mm 2 Core Shielded Microphone Cable (100 m Roll); Approved make- Krystal
Supply and Laying of HDMI ‐ HDMI Cable 1.8 Mtrs, Preferred Make-Crestron/Extron/Lightware
Supply and Laying of HDMI ‐ HDMI Cable 10 Mtrs, Preferred Make-Crestron/Extron/Lightware
SITC of True Interactive , Multi Touch & Writing , Palm Erasing, Airclass,Screen Sharing, Multi OS Compatibility, True Color, Imersive View , In-Built Web Browser All in One 75" LFD Panel with following Specifications; Make-LG/Hitachi/Specktron
Supplying, fitting & fixing of Rimless Blind installation Wall Hung WC with UF soft Close Seat Cover Hinges and Accessories set (Make Jaguar model number- DRS-WHT-37953 BIUFSM or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of 15mm brass 2 way Bib Cock for health faucet with wall Bib tap (Make Jaguar model number- DRC-CHR-37041 or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of Piller Cock of Single Lever Basin Mixer with Popup Waste & 450mm Long Braided Hoses (Make Jaguar model number- DRS-37051B or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of Bathroom Hand Shower (Health faucet) with 1 Meter long Easy Flex Tube in Chrome Finish & wall Hook with NRV (Back Flow Preventer) (Make Jaguar model number- ALD-CHR-579 or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of Toilet paper Holder Recessed Type (Stainless Steel) (Make Jaguar model number- AHS-1551 or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of Metropole Flush valve Dual Flow 40mm Size (Concealed Body) with Exposed Shut off Provision & 100mm Square Plate (3.0/6.0 Lts Per Flushing) (Make Jaguar model number- FLV-1095NSQ or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of Counter Top Basin (Make Jaguar model number-DRS-WHT-37601 or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of Soap Dispenser with Glass bottel. (Make Jaguar model number- AKP-35735P or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of Piller Cock of Single Lever Basin Mixer with Popup Waste & 450mm Long Braided Hoses (Make Jaguar model number- DRS-37051B or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of Waste Coupling 32 mm Size Full Thread with 80 mm Height, Material of Waste Fitting- Leaded Tin Bronze conforming to Grade 2 of IS 318/1962 (Make Jaquar model number- ALD-709 or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of Bottle trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange (Make Jaguar model number- ALD-769L300x190 or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of Towel ring Square cast Brass (Make Prima model number- PIL-4504-G or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of Angle Stop Valve(internally Threaded) (Make Jaguar model number- OPP-15053PM or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of Photon Urinal Sensor Flusher (Make Bharat Photon model number- 5116877-34402452364 or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of Hand dryer (Make jaquar model number- 5116877-22472057587 or equivalent) all complete as per engineer in charge.
Supplying, fitting & fixing of grab bar (Make jaquar model number- 5116877-72635130114 or equivalent) all complete as per engineer in charge.
VARIABLE REFRIGERANT FLOW SYSTEM :VARIABLE REFRIGERANT FLOW SYSTEM : Approved Brands – O-GENERAL , HITACHI , MITSUBISHI HEAVY / Daikin Supply of Variable Refrigerant Flow modular type air-conditioning system with DIP-IPM Inverter Controlled with step less modulation complete with indoor & outdoor units, individual remote controller and centralized controller, interconnected refrigerant piping , full charge of R--410 refrigerant gas & oil, control cabling etc. -Supply of Outdoor Unit- Supply of Top Discharge Heat Pump Type Outdoor units equipped with highly efficient inverter scroll compressors 85 Steps 15Hz ~ 100Hz. Each Module should have multiple full inverter compressor with special heat exchanger, Steps speed control DC motor condenser fan , auto check function for connection error, auto address setting and in built Double Stage Oil Separation to ensure minimum oil entrachment and proper lubrication. The condensing units should be capable for outside ambient 52˚C.
32 HP Outdoor Unit
40 HP Outdoor Unit
56 HP Outdoor Unit
72 HP Outdoor Unit
VRF INDOOR UNIT --- Supply of Indoor units address setting and capacity as mentioned below. Multi speed motor, coil section with DX coil. The Indoor Unit Should be fire retardent , i.e the electronic PCB of the Indoor unit should be enclosed in sheet metal box , by which fire will not spread in case of fire .
Hi-wall type of 2.5 HP capacity CFM 585 (min) With Cordless Remote Control. - Maximum Sound Pressure Level - 49 dB
Hi-wall type of 1.5 HP capacity CFM 388 (min) With Cordless Remote Control. - Maximum Sound Pressure Level - 45 dB
Hi-wall type of 1.0 HP capacity CFM 370 (min) With Cordless Remote Control. - Maximum Sound Pressure Level - 43 dB
4-Way Cassette Type Indoor Unit(6.0HP) with corded Remote Control - capacity 6.0 HP and with minimum Air Quantity of 1306 CFM - Maximum Sound Pressure level - db- 48 db, the system should have with 4 Fan Speed.
4-Way Cassette Type Indoor Unit(5.0HP) with corded Remote Control - capacity 5.0 HP and with minimum Air Quantity of 1306 CFM - Maximum Sound Pressure level - db- 48 db, the system should have with 4 Fan Speed.
4-Way Cassette Type Indoor Unit(4.0HP) with corded Remote Control - capacity 4.0 HP and with minimum Air Quantity of 1306 CFM - Maximum Sound Pressure level - db- 48 db, the system should have with 4 Fan Speed.
Supply of Y-Joint / Refnet Joint With required proper insulation .
Installation of Variable Refrigerant Flow System--- Lifting , Shifting ,vaccumizing, nitrogen flusing, Installation , testing & Commissioning of Top Discharge Type Outdoor units equipped with highly efficient inverter scroll compressors.
32 HP Outdoor Unit
40 HP Outdoor Unit
56 HP Outdoor Unit
72 HP Outdoor Unit
Installation of Indoor Units ----- Lifting, Shifting , filter section & Installation,Erection , testing and commissioning of Indoor units address setting and capacity as mentioned below. Multi speed motor, coil section with DX coil.
Hi-wall type of 2.5 HP capacity
Hi-wall type of 1.5 HP capacity
Hi-wall type of 1.0 HP capacity
4-Way Cassette Type Indoor Unit with corded Remote Control - capacity 6.0 HP
4-Way Cassette Type Indoor Unit with corded Remote Control - capacity 5.0 HP
4-Way Cassette Type Indoor Unit with corded Remote Control - capacity 4.0 HP
Cu Control cable( 2 Cx1.5 sq.mm): Supply, erection and commissioning of cu control cable 6 Corex1.5 sq. mm for connection in between outdoor unit to indoor unit.
R410 Gas Charging Top Up
Anti-Vibration Ceiling mounting, isolation pads/hooks for Air-Conditioning Plants .
Supply, fabrication and installation of MS Frame duly painted for outdoor units for outdoor unit.
Testing and commissioning of VRF units by nitrogen gas pressure testing and flushing, vacumizing etc as reqd. with special tools and tackles.
Installation of Y-Joint / Refnet Joint With Insulation
MODULER WORKSTATION 4 SEATER MODEL NO SMART-4 FOR BONDED,TECH-ROOM,CAM CENTER,QC CELL,ADMIN.OFFICE.-MODULAR WORKSTATION - SHARING MODEL: CLUSTER LINEAR , SKU IS CLUSTER/2-2. PER SEATING SIZE : 1200mm(L)X 600mm(D)X 1050mm(H) & THE WHOLE CLUSTER SIZE : 2400mm(L)X 1200mm(D)X 1050mm(H). * SUPPLYING AND PLACING IN POSITION OF CLUSTER LINER FOUR SEATER SHARING DESKING SYSTEM WORKSTATION OF SIZE 1200MM X 600MM X 1050MM. * TABLE TOP SIZE IS 1200MM (L) X 600MM (D), 25MM THICK PRELAM PARTICLE BOARD TABLETOP WITH MACHINE PRESSED EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXED WITH THE HOT MELT GLUE. TABLETOP SUPPORTED WITH POWDER COATED C - SHAPE METAL LEGS OF SIZE 50MM X 50MM AND CONNECTORS OF SIZE 40MM X 40MM.WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP, SINGLE METAL POWDER COATED RACEWAY & "T" RISER LEG WIRE CARRYING BELOW TOP FOR WIRE MANAGEMENT THROUGH THE FLOOR TO THE TABLE. All METALLIC PARTS SHOULD BE EPOXY POLYESTER POWDER COATING TO THICKNESS OF 50 MICRON (APPROX) . 18MM THICK SOFT BOARD ABOVE TABLE TOP AT FRONT SIDE SUPPORTED WITH METAL POWDER COATED HOLDERS. * THREE LAYER PRELAMINATED PARTICLES BOARD (WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST . * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
HIGH BACK CHAIR FOR WORKSTATION MODEL NO FOCUS/HB/PRE-FOCUS/HB/FL : HIGH BACK FABRIC CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - FOCUS CHAIR , TYPE : * HIGH BACK 360° DEGRE REVOLVING CHAIR SKU : FOCUS/HB/FL , * ALL OVER SIZE IS : 650MM(L)X 660MM(D)X 1200MM(H) , *THE CHAIR MADE OF FULL FABRIC IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : AMREST IS HAVING TWO ADJUSTMENT HEIGHTS (UP & DOWN) . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : SELF WEIGHT MULTI LOCKING . * ONLY SEAT SIZE IS 480MM(L)X 490MM(D)X 440MM(H) & THE BACK SIZE IS 650MM(L)X 650MM(H) , SEAT MAXIMUM HEIGHT IS 540MM & MINIMUM HEIGHT IS 440MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1200MM & MINIMUM HEIGHT IS 1100MM * GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650 MM CHROME BASE WITH SMOOTH CASTORS . * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
OFFICE TABLE FOR ASST.ENGINEER-MAIN TABLE SIZE:- W1500xD750xH750mm SIDE RUNNER SIZE :- W900xD450xH750mm-Supplying and placing of Office Table With Side Runner ,made up of Prelaminated particle board conforming to IS : 12823 Interior Grade with PVC edge banding. Top are with 25mm thk boards .The Worktops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . Table top is supported on 18mm thick Gable ends and 18mm thk Modesty panels. exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge banding. Separate provision for mounting switches on the wall adjoining the tables shall be made by customer as the tables do not come with switch mounting facility.Main table has Pedestal unit of size 400mm L x 450mm D x 680mm made up of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with 3 Drawer ( 2 Drawer + 1 Filing ) with roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng Unit. Side storage is made of 18mm thick pre laminated partical Board conforming to IS : 12823 and is hinged door unit. The back of the unit is made from 18mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. Back The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. The product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.
STORAGE SIZE-W 900xD 450xH 1200mm-Supplying and placing of Storage,Make Trent Prelaminated Particle Board storage with openable doors of 1200mm(ht), made up of 18mm thick prelaminated particle board with PVC edge banding and locking arrangement.Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade.The back of the unit is made from 18mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. Storage has adjustable shelves inside and cam lock, tower bolt and locking strips.The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has Brushed SS finish handles and lock . Prelam storage unit of 1200mm ht and 450mm depth ( SQFT) ROThe product must be from a Manufacturer having ISO 9001,ISO 14001,, AIOTA ,BIFMA COMPLIANT, GREEN GUARD,SEDEX CERTIFICATE. MAKEDURIAN.WARRANTY-5YEARS.
RICH/37826/LB : LOW BACK LEATHERETTE CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - POISE CHAIR , TYPE : * LOW BACK 360° DEGRE REVOLVING CHAIR SKU : RICH/37826/LB, * ALL OVER SIZE IS : 625MM(L)X 490MM(D)X 1135MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : CHROME FINISH ARMS WITH PU PADDING . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : CENTER TILT MECHANISM. * ONLY SEAT SIZE IS 625MM(L)X 490MM(D)X 660-535MM(H) & THE BACK SIZE IS 625MM(L)X 560MM(H) SEAT MAXIMUM HEIGHT IS 660MM & MINIMUM HEIGHT IS 535MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1135MM & MINIMUM HEIGHT IS 1035MM * GAS LIFT 95MM TELESCOPIC HAUDRAULIC * BASE : 650 MM SHINY CHROME BASE WITH NYLON CASTORS SHALL BE 65.0 +/- 0.5 CM PITCH-CENTRE-DIA (75.0 +/- 1.0 CM WITH CASTORS) * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
VISITOR/TRAINING CHAIR-ANJIS/32002 : FIX MULTI PURPOUSE LEATHERETTE CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - ANJIS/32002 CHAIR , TYPE : * FIX CANTILEVER , * ALL OVER SIZE IS : 595MM(L)X 510MM(D)X 875MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : PADDED ARMREST. * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * ONLY SEAT SIZE IS 500MM(L)X 510MM(D)X 455 MM(H) & THE BACK SIZE IS 440MM(L)X 595MM(H) , BACK HEIGHT IS @ 440MM . * BASE : 4 LEGS METAL POWDER COATED * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
EXECUTIVE DESK FOR CHIEF ENGINEER-PRODUCT: DIRECTOR DESK DWS/34755 SKU IS DWS/34755 DIRECTOR DESK EXECUTIVE TABLE STRUCTURE OF L SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 2100MM(L)X 900MM(D)X 750MM(H) 50MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE .SIDE PANNEL IS MADE OF 50MM THICK . * PROVISION OF SIDE UNIT OF SIZE IS 1800MM(L)X 500MM(D)X 620MM(H),(TABLE TOP BASED ON 4 METAL SS STUD GRADE 304,SIDE UNIT HAVE 1 OPEN SHELVE FOR CPU,1 OPEN DOOR FIXED SHELVE, 2 OPENABLE DOOR + 3 DRAWERS & 2 DRAWERS ARE RIGHT SIDE ATTACHED WITH MODESTY AND SIDE PANNEL IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING . OVERALL CONSTRUCTION OF 18 MM THICK ALONG WITH FECIA OF DRAWERS . *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
CLINT/C BACK UNIT STORAGE MATERIAL : PRELAMINATED PARTICLE BOARD , BACK UNIT SIZE : 1600 MM (L)X 450 MM (D)X 800 MM (H). COLOUR : BROWN-WCLASSIC WALNUT BROWN-SMOKE OAK & FINISH : LAMINATE FINISH . * PROVIDING & SUPPLING PLACING POSITION OF MODULAR BACK UNIT TOP SHALL BE MADE FROM 18 MM THICK PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST. * WHILE REST OF THE SIDES AS WELL AS SHELVES AND SHUTTER TO BE MADE UP OF 18 MM THICK PRELAMINATED PARTICLE BOARD. MACHINE PRESSED EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXED DULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS. * STORAGE UNIT WITH 4 SHUTTERS CONSTRUCTION IS 1 OPENABLE DOOR WITH 1 FIXED SHELVE + 2 OPENABLE DOOR WITH 1 FIXED SHELVE + 1 OPENABLE DOOR WITH 1 FIXED SHELVE , IN PROVIDED WITH 3 UNIVERSAL CAM LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVER ALL HEIGHT OF PRODUCT IS @ 800 MM . * EACH SHUTTER SHOULD BE FIXED WITH REQUIRED NUMBERS HINGES, SS TOWER BOLT OF 100 X 10, DOUBLE STRIP MAGNETIC CATCHER AND DRAWERS SHALL HAVE 100 MM SIZE SS FANCY HANDLES (ONE ON EACH DRAWER) WITH NECESSARY HARDWARE/ FITTING/ HINGES ETC. OF APPROVED QUALITY(MAKE: EBCO).FOR INSTALLATION OF SIDE UNIT WOODEN DOWELS AND MINIFIX TO USE FOR ADDITIONAL SUPPORT. * THREE LAYER PRELAMINATED PARTICLES BOARD ( WOOD PRODUCT ) OF GRADE II TYPE III OF IS 12823/LATEST. * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
RICH/37826/HB : HIGH BACK LEATHERETTE CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - POISE CHAIR , TYPE : * HIGH BACK 360° DEGRE REVOLVING CHAIR SKU : RICH/37826/HB , * ALL OVER SIZE IS : 640MM(L)X 500MM(D)X 1210MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : FIXED CHROME FINISH ARMS WITH PU PADDING . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : CENTER TILT MECHANISM . * ONLY SEAT SIZE IS 665MM(L)X 500MM(D)X 580-495MM(H) & THE BACK SIZE IS 665MM(L)X 580MM(H) , SEAT MAXIMUM HEIGHT IS 635MM & MINIMUM HEIGHT IS 540MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1210MM & MINIMUM HEIGHT IS 1110MM * GAS LIFT 85MM TELESCOPIC HAUDRAULIC * BASE : 650 MM SHINY CHROME BASE WITH NYLON CASTORS SHALL BE 65.0 +/- 0.5 CM PITCH-CENTRE-DIA (75.0 +/- 1.0 CM WITH CASTORS) * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
RICH/37816 : FIX CANTILEVER LEATHERETTE CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - CRAZE CHAIR , TYPE : * FIX CANTILEVER CHAIR SKU : RICH/37815/CN/A, * ALL OVER SIZE IS : 610MM(L)X 505MM(D)X 990MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE BLACK FINISH FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : CHROME FINISH ARMS WITH PU PADDING . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORTbackrest support * ONLY SEAT SIZE IS 610MM(L)X 505MM(D)X 485MM(H) & THE BACK SIZE IS 610MM(L)X 540MM(H) , * BASE : CHROME FINISH TUBLAR FRAME OF CANTILEVER TYPE . * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
3 SEATER MODERNIST CLASSIC DESIGN WINDSOR SOFA SKU : WINDSOR/3 SIZE : 1650MM(L) X750MM(D)X 710MM(H) MATERIAL : PREMIUM LEATHERETTE / STYLE : MODERN COLOUR : BROWN-CAMEL BROWN / FINISH : MATTE. * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1650MM(L) X750MM(D)X 710MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME. * COMBINATION CONSTRUCTION STRUCTURE ARE MADE IN MOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 25 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,40MM THICK BACK FOAM HAVING 25 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 25 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BROWN-CAMEL BROWN COLOUR, IT COMPLEMENTS THE MODISH SLEEK STEEL . ( SEAT : 545 MM(D) X 410MM(H) , ARMS HEIGHT @ 610 MM / BACK HEIGHT @ 290 MM). * THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK , FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
2 SEATER MODERNIST CLASSIC DESIGN WINDSOR SOFA SKU : WINDSOR/2 SIZE : 1390MM(L) X750MM(D)X 710MM(H) MATERIAL : PREMIUM LEATHERETTE / STYLE : MODERN COLOUR : BROWN-CAMEL BROWN / FINISH : MATTE. * SUPPLYING AND PLACING TWO SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1390MM(L) X750MM(D)X 710MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME. * COMBINATION CONSTRUCTION STRUCTURE ARE MADE IN MOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 25 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,40MM THICK BACK FOAM HAVING 25 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 25 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BROWN-CAMEL BROWN COLOUR, IT COMPLEMENTS THE MODISH SLEEK STEEL LEGS . ( SEAT : 545 MM(D) X 410MM(H) , ARMS HEIGHT @ 610MM / BACK HEIGHT @ 290MM ) * THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK , FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
Material & Subtype Glass - Clear Glass Table Top Material Clear Glass Leg Material Metal Finish Glossy Colour & Colour Family Clear Glass Dimension (W)1300mm X (D)650mm X (H)430mm Table Top Thickness 15mm Size Standard Style Contemporary Assembly Type Knock Down SKU ZEE/34475
3 SEATER MODERNIST CLASSIC DESIGN BERRY/55001 SOFA SKU : BERRY/55001/C/3 SIZE : 1905MM(L) X890MM(D)X 870MM(H) AND 1 SEATER SIZE SIZE : 960MM(L) X890MM(D)X 870MM(H) MATERIAL : PREMIUM LEATHERETTE / STYLE : CONTEMPORARY COLOUR : BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER / FINISH : MATTE. * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1905MM(L) X890MM(D)X 870MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME. * COMBINATION CONSTRUCTION STRUCTURE ARE MADE IN MOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 28 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 50MM THIK,40MM THICK BACK FOAM HAVING 20 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 20 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER COLOUR, IT COMPLEMENTS THE MODISH LEGS ARE MADE BY ROUND SHAPE IN PVC MATERIAL. ( SEAT : 510 MM(D) X 445MM(H) , ARMS HEIGHT @ 620MM / BACK HEIGHT @ 460MM ) * THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK , FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
Material & Subtype Solid Wood - Beech Wood Table Top Material Clear Glass Frame Material Solid Wood Leg Material Solid Wood Finish Matte Colour & Colour Family Brown - Walnut Dimension (W)1130mm X (D)630mm X (H)410mm Size Standard Style Contemporary Assembly Type Knock Down SKU HOPPER/A/CT
PRODUCT: OFFICE DESK DWS/34723 SKU IS DWS/34723 OFFICE DESK DESK STRUCTURE OF L SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 1500MM(L)X 600MM(D)X 750MM(H) 25MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE . MODESTY PANNEL 18MADE OF MM THICK . *PROVISION OF SIDE UNIT OF SIZE IS 900MM(L)X 450MM(D)X 750MM(H) ,(COMBINATION CONSTRUCTION WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP, LEFT SIDE TABLE TOP BASED ON A 18MM THICK SIDE PANNEL ENGINEERED WOOD & FROM RIGHT SIDE UNIT HAVE 2 SLIDING DOOR + 1 FIXED SHELVE . *SIDE UNIT SIZE 900MM(L)X 450MM(D)X 750MM(H), IN PROVIDED WITH LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF SIDE UNIT IS 18MM THICK ALONG WITH FECIA OF SLIDDING SHUTTERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
UTRC/33207/MB : MEDIUM BACK LEATHERETTE CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - MARSHAL CHAIR , TYPE : * MEDIUM BACK 360° DEGRE REVOLVING CHAIR SKU : UTRC/33207/MB , * ALL OVER SIZE IS : 660MM(L)X 525MM(D)X 995MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : FIXED ARMS P.P. CONNECTED WITH SEAT AND BACK . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : CENTRE TILT MECHANISM . * ONLY SEAT SIZE IS 525MM(L)X 525MM(D)X 490MM(H) & THE BACK SIZE IS 660MM(L)X 535MM(H) , SEAT MAXIMUM HEIGHT IS 490MM & MINIMUM HEIGHT IS 410MM & BACK MAX HEIGHT IS @ 995MM . * GAS LIFT 80MM TELESCOPIC HAUDRAULIC * BASE : 650MM NYLON BASE WITH 55 MM CASTORS * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
ANJIS/32002 : FIX MULTI PURPOUSE LEATHERETTE CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - ANJIS/32002 CHAIR , TYPE : * FIX CANTILEVER , * ALL OVER SIZE IS : 595MM(L)X 510MM(D)X 875MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : PADDED ARMREST. * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * ONLY SEAT SIZE IS 500MM(L)X 510MM(D)X 455 MM(H) & THE BACK SIZE IS 440MM(L)X 595MM(H) , BACK HEIGHT IS @ 440MM . * BASE : 4 LEGS METAL POWDER COATED * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
PRODUCT: DIRECTOR DESK THEON SKU IS THEON PREMIUM SUITES EXECUTIVE TABLE STRUCTURE OF L SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 2200MM(L)X 1000MM(D)X 750MM(H) 45MM THICK TABLE TOP MADE OF HP LAMINATE POST FORM WORK SURFACE WITH WARM FINISH IN BLACK OAK POSTFORMING EDGES IN MATCHING COLOR. SIDE PANNEL IS MADE OF 45MM THICK . * PROVISION OF SIDE UNIT OF SIZE IS 1000MM(L)X 500MM(D)X 720MM(H) ,(COMBINATION CONSTRUCTION BELOW TABLE TOP SIDE UNIT HAVE 1 OPEN FIXED SHELVE WITH 3 DAWERS + 2 OPENABLE DOORS . * MOBILE PEDESTAL OF SIZE 450MM(L)X 400MM(D)X 630MM(H) , HAVING 2 DRAWERS + 1 FILLING DRAWER WITH CASTORS IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. * ALL THE MDF BORAD ARE IS-14587-1998 WITH CONFIRM TO DIN 68861.ISO 9001- 2015 QUALITY CERTIFICATION CONFIRMING TO ASTM D 4499 STANDARDS FOR VISCOSITY AND THERMAL STABILITY . * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
CLINT/C BACK UNIT STORAGE MATERIAL : PRELAMINATED PARTICLE BOARD , BACK UNIT SIZE : 1600 MM (L)X 450 MM (D)X 800 MM (H). COLOUR : BROWN-WCLASSIC WALNUT BROWN-SMOKE OAK & FINISH : LAMINATE FINISH . * PROVIDING & SUPPLING PLACING POSITION OF MODULAR BACK UNIT TOP SHALL BE MADE FROM 18 MM THICK PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST. * WHILE REST OF THE SIDES AS WELL AS SHELVES AND SHUTTER TO BE MADE UP OF 18 MM THICK PRELAMINATED PARTICLE BOARD. MACHINE PRESSED EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXED DULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS. * STORAGE UNIT WITH 4 SHUTTERS CONSTRUCTION IS 1 OPENABLE DOOR WITH 1 FIXED SHELVE + 2 OPENABLE DOOR WITH 1 FIXED SHELVE + 1 OPENABLE DOOR WITH 1 FIXED SHELVE , IN PROVIDED WITH 3 UNIVERSAL CAM LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVER ALL HEIGHT OF PRODUCT IS @ 800 MM . * EACH SHUTTER SHOULD BE FIXED WITH REQUIRED NUMBERS HINGES, SS TOWER BOLT OF 100 X 10, DOUBLE STRIP MAGNETIC CATCHER AND DRAWERS SHALL HAVE 100 MM SIZE SS FANCY HANDLES (ONE ON EACH DRAWER) WITH NECESSARY HARDWARE/ FITTING/ HINGES ETC. OF APPROVED QUALITY(MAKE: EBCO).FOR INSTALLATION OF SIDE UNIT WOODEN DOWELS AND MINIFIX TO USE FOR ADDITIONAL SUPPORT. * THREE LAYER PRELAMINATED PARTICLES BOARD ( WOOD PRODUCT ) OF GRADE II TYPE III OF IS 12823/LATEST. * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
RICH/37826/HB : HIGH BACK LEATHERETTE CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - POISE CHAIR , TYPE : * HIGH BACK 360° DEGRE REVOLVING CHAIR SKU : RICH/37826/HB , * ALL OVER SIZE IS : 640MM(L)X 500MM(D)X 1210MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : FIXED CHROME FINISH ARMS WITH PU PADDING . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : CENTER TILT MECHANISM . * ONLY SEAT SIZE IS 665MM(L)X 500MM(D)X 580-495MM(H) & THE BACK SIZE IS 665MM(L)X 580MM(H) , SEAT MAXIMUM HEIGHT IS 635MM & MINIMUM HEIGHT IS 540MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1210MM & MINIMUM HEIGHT IS 1110MM * GAS LIFT 85MM TELESCOPIC HAUDRAULIC * BASE : 650 MM SHINY CHROME BASE WITH NYLON CASTORS SHALL BE 65.0 +/- 0.5 CM PITCH-CENTRE-DIA (75.0 +/- 1.0 CM WITH CASTORS) * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
RICH/37816 : FIX CANTILEVER LEATHERETTE CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - CRAZE CHAIR , TYPE : * FIX CANTILEVER CHAIR SKU : RICH/37815/CN/A, * ALL OVER SIZE IS : 610MM(L)X 505MM(D)X 990MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE BLACK FINISH FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : CHROME FINISH ARMS WITH PU PADDING . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORTbackrest support * ONLY SEAT SIZE IS 610MM(L)X 505MM(D)X 485MM(H) & THE BACK SIZE IS 610MM(L)X 540MM(H) , * BASE : CHROME FINISH TUBLAR FRAME OF CANTILEVER TYPE . * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
3 SEATER MODERNIST CLASSIC DESIGN WINDSOR SOFA SKU : WINDSOR/3 SIZE : 1650MM(L) X750MM(D)X 710MM(H) MATERIAL : PREMIUM LEATHERETTE / STYLE : MODERN COLOUR : BROWN-CAMEL BROWN / FINISH : MATTE. * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1650MM(L) X750MM(D)X 710MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME. * COMBINATION CONSTRUCTION STRUCTURE ARE MADE IN MOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 25 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,40MM THICK BACK FOAM HAVING 25 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 25 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BROWN-CAMEL BROWN COLOUR, IT COMPLEMENTS THE MODISH SLEEK STEEL . ( SEAT : 545 MM(D) X 410MM(H) , ARMS HEIGHT @ 610 MM / BACK HEIGHT @ 290 MM). * THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK , FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
2 SEATER MODERNIST CLASSIC DESIGN WINDSOR SOFA SKU : WINDSOR/2 SIZE : 1390MM(L) X750MM(D)X 710MM(H) MATERIAL : PREMIUM LEATHERETTE / STYLE : MODERN COLOUR : BROWN-CAMEL BROWN / FINISH : MATTE. * SUPPLYING AND PLACING TWO SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1390MM(L) X750MM(D)X 710MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME. * COMBINATION CONSTRUCTION STRUCTURE ARE MADE IN MOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 25 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,40MM THICK BACK FOAM HAVING 25 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 25 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BROWN-CAMEL BROWN COLOUR, IT COMPLEMENTS THE MODISH SLEEK STEEL LEGS . ( SEAT : 545 MM(D) X 410MM(H) , ARMS HEIGHT @ 610MM / BACK HEIGHT @ 290MM ) * THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK , FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
CENTER TABLE FOR CHIEF ENGINEER-Material & Subtype Glass - Clear Glass Table Top Material Clear Glass Leg Material Metal Finish Glossy Colour & Colour Family Clear Glass Dimension (W)1300mm X (D)650mm X (H)430mm Table Top Thickness 15mm Size Standard Style Contemporary Assembly Type Knock Down SKU ZEE/34475
PRODUCT: OFFICE DESK DWS/34723 SKU IS DWS/34723 OFFICE DESK DESK STRUCTURE OF L SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 1500MM(L)X 600MM(D)X 750MM(H) 25MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE . MODESTY PANNEL 18MADE OF MM THICK . *PROVISION OF SIDE UNIT OF SIZE IS 900MM(L)X 450MM(D)X 750MM(H) ,(COMBINATION CONSTRUCTION WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP, LEFT SIDE TABLE TOP BASED ON A 18MM THICK SIDE PANNEL ENGINEERED WOOD & FROM RIGHT SIDE UNIT HAVE 2 SLIDING DOOR + 1 FIXED SHELVE . *SIDE UNIT SIZE 900MM(L)X 450MM(D)X 750MM(H), IN PROVIDED WITH LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF SIDE UNIT IS 18MM THICK ALONG WITH FECIA OF SLIDDING SHUTTERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
UTRC/33207/MB : MEDIUM BACK LEATHERETTE CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - MARSHAL CHAIR , TYPE : * MEDIUM BACK 360° DEGRE REVOLVING CHAIR SKU : UTRC/33207/MB , * ALL OVER SIZE IS : 660MM(L)X 525MM(D)X 995MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : FIXED ARMS P.P. CONNECTED WITH SEAT AND BACK . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : CENTRE TILT MECHANISM . * ONLY SEAT SIZE IS 525MM(L)X 525MM(D)X 490MM(H) & THE BACK SIZE IS 660MM(L)X 535MM(H) , SEAT MAXIMUM HEIGHT IS 490MM & MINIMUM HEIGHT IS 410MM & BACK MAX HEIGHT IS @ 995MM . * GAS LIFT 80MM TELESCOPIC HAUDRAULIC * BASE : 650MM NYLON BASE WITH 55 MM CASTORS * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
ANJIS/32002 : FIX MULTI PURPOUSE LEATHERETTE CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - ANJIS/32002 CHAIR , TYPE : * FIX CANTILEVER , * ALL OVER SIZE IS : 595MM(L)X 510MM(D)X 875MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : PADDED ARMREST. * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * ONLY SEAT SIZE IS 500MM(L)X 510MM(D)X 455 MM(H) & THE BACK SIZE IS 440MM(L)X 595MM(H) , BACK HEIGHT IS @ 440MM . * BASE : 4 LEGS METAL POWDER COATED * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
CONFERENCE TABLE - MATERIAL : PRELAMINATED PARTICLE BOARD CONNECTING PART SIZE : 1200MM(L)X 600MM(D)X 750MM(H), S.P-1 SIZE-1350X600X750 * PROVIDING & SUPPLYING OVAL - SHAPE MODERN DESIGN CONFERENCE TABLE & IN BETWEEN U SHAPE TABLE TOP LENGTH IS @ 1350 MM, TABLE TOP OFFERS YOU A GENEROUS WORKSPACE,DESK PRIMARY WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 1200MM(L)X 600MM(D)X 750MM(H) TABLE TOP MADE OF 36MM THICK WHICH GIVE MORE SURFACE AREA FOR WORK ,MACHINE MADE MODULAR FURNITURE MADE PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST, * CONSTRUCTION PROVISION OF CONFERENCE TABLETOP SUPPORTED WITH 18MM THICK SIDE PANNELS IN BROWN-BLACK OAK COLOUR MADE BY PRELAMINATED PARTICLE BOARD AND BELOW THE TOP 18MM THICK PRELAM PARTICLE BOARD MODESTY PANEL.OUR WORK SURFACE FURNITURE IS FINISHED WITH EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE,FIXED WITH HOT MELT GLUE. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST, * THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
NATURE/HB/FL : HIGH BACK MESH CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - NATURE CHAIR , TYPE : * HIGH BACK 360° DEGRE REVOLVING CHAIR SKU : NATURE/HB/FL , * ALL OVER SIZE IS : 630MM(L)X 675MM(D)X 1300MM(H) , *THE CHAIR MADE OF FULL MESH IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : AMREST IS HAVING TWO ADJUSTMENT HEIGHTS (UP & DOWN) . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT). * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : FRAME OF DESIGN SHALL BE CURVED MADE OF TWO PIECES INJECTION MOULDED FRAME COVER WITH MESH .BACKREST SUPPORT ADJUSTABLE LUMBAR SUPPORT * MECHANISM : SELF WEIGHTED MULTI LOCKING MECHANISM . * ONLY SEAT SIZE IS 520MM(L)X 525MM(D)X 445-545MM(H) & THE BACK SIZE IS 470MM(L)X 700MM(H) SEAT MAXIMUM HEIGHT IS 545MM & MINIMUM HEIGHT IS 445MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1300MM & MINIMUM HEIGHT IS 1200MM . * GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650 MM CHROME BASE WITH SMOOTH CASTORS . * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
NATURE/MB/FL : MEDIUM BACK MESH CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - NATURE CHAIR , TYPE : * MEDIUM BACK 360° DEGRE REVOLVING CHAIR SKU : NATURE/MB/FL , * ALL OVER SIZE IS : 630MM(L)X 675MM(D)X 1115MM(H) , *THE CHAIR MADE OF FULL MESH IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : AMREST IS HAVING TWO ADJUSTMENT HEIGHTS (UP & DOWN) . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT). * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : FRAME OF DESIGN SHALL BE CURVED MADE OF TWO PIECES INJECTION MOULDED FRAME COVER WITH MESH .BACKREST SUPPORT ADJUSTABLE LUMBAR SUPPORT * MECHANISM : SELF WEIGHTED MULTI LOCKING MECHANISM . * ONLY SEAT SIZE IS 520MM(L)X 525MM(D)X 445-545MM(H) & THE BACK SIZE IS 470MM(L)X 590MM(H) , SEAT MAXIMUM HEIGHT IS 545MM & MINIMUM HEIGHT IS 445MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1115MM & MINIMUM HEIGHT IS 1015MM . * GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650 MM CHROME BASE WITH SMOOTH CASTORS . * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
PRODUCT: DIRECTOR DESK MJF/61101 SKU IS MJF/61101/A PREMIUM SUITES DIRECTOR TABLE STRUCTURE OF L-SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 2800MM(L)X 2330MM(D)X 770MM(H) 45MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH RICH CHERRY FINISH SAME MATCHING EDGE BANDING MADE OF SAME RED CHERRY P.U.POLISH.MODESTY IS DESIGNED WITH LEATHER PATCH.SIDE PANNEL IS MADE OF 36MM THICK . * PROVISION OF SIDE UNIT OF SIZE IS 1200MM(L)X 595MM(D)X 770MM(H) ,CONSTRUCTION ON TABLE TOP WIRE MANAGEMENT 2 HOLE WITH SS GROOMENT & 1 HOLE WITH PVC GROOMENT ON TOP SIDE UNIT. BELOW TABLE TOP ONE KEYBOARD TRAY, IN SIDE UNIT BELOW THE TOP 1 KEY BOARD TRAY,1 OPEN BOX FILE ,1 DRAWER + 1 OPEANABLE DOOR SHELVE. * FIXED PEDESTAL OF SIZE 450MM(L)X 400MM(D)X 690MM(H) , HAVING 3 EQUAL DRAWERS IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * ALL THE MDF BORAD ARE IS-14587-1998 WITH CONFIRM TO DIN 68861.ISO 9001- 2015 QUALITY CERTIFICATION CONFIRMING TO ASTM D 4499 STANDARDS FOR VISCOSITY AND THERMAL STABILITY . * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
MJF BACK UNIT BACK UNIT STORAGE MATERIAL : PRELAMINATED PARTICLE BOARD/VENEER - MDF/STEAM BEECH VENEER , BACK UNIT SIZE : 2400 MM (L)X 400 MM (D)X 1040 MM (H). COLOUR : RED - DARK CHERRY & FINISH : GLOSSY . * PROVIDING & SUPPLING PLACING POSITION OF MODULAR BACK UNIT TOP SHALL BE MADE FROM 25 MM THICK PRELAMINATED PARTICLE BOARD/VENEER - MDF/STEAM BEECH VENEER OF GRADE II TYPE III OF IS 12823/LATEST & CONFIRM TO DIN 68861.ISO 9001- 2015. * WHILE REST OF THE SIDES AS WELL AS SHELVES AND SHUTTER TO BE MADE UP OF 18 MM THICK PRELAMINATED PARTICLE BOARD/VENEER - MDF/STEAM BEECH VENEER P.U. POLISH. ALL EDGES TO BE PROVIDED WITH SAME MATCHING VENEER EDGE BANDING FIXED WITH THE HOT MELT GLUE. * STORAGE UNIT WITH 3 OPEN CARCASS, 4 SHUTTERS + 3 DRAWERS CONSTRUCTION IS BELOW THE TOP 3 OPEN CARCASS SHELVES AT SAME SIZE PER CARCASS SIZE IS 555 (L) X 380 (H) ,2 OPENABLE DOORS WITH 1 FIXED SHELVE + 3 DRAWERS + 2 OPENABLE DOORS WITH 1 FIXED SHELVE , IN PROVIDED WITH 2 UNIVERSAL CAM LOCK + 1 CENTRAL LOCKS FOR DRAWER'S FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVER ALL HEIGHT OF PRODUCT IS @ 1040 MM . * EACH SHUTTER SHOULD BE FIXED WITH REQUIRED NUMBERS HINGES, SS TOWER BOLT OF 100 X 10, DOUBLE STRIP MAGNETIC CATCHER AND DRAWERS SHALL HAVE 100 MM SIZE SS FANCY HANDLES (ONE ON EACH DRAWER) WITH NECESSARY HARDWARE/ FITTING/ HINGES ETC. OF APPROVED QUALITY(MAKE: EBCO).FOR INSTALLATION OF SIDE UNIT WOODEN DOWELS AND MINIFIX TO USE FOR ADDITIONAL SUPPORT. * ALL THE MDF BORAD ARE IS-14587-1998 WITH CONFIRM TO DIN 68861.ISO 9001- 2015 QUALITY CERTIFICATION CONFIRMING TO ASTM D 4499 STANDARDS FOR VISCOSITY AND THERMAL STABILITY . * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
HALX/37199/A/HB : HIGH BACK NATURAL LEATHER CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - BERLIN CHAIR , TYPE : * HIGH BACK 360° DEGRE REVOLVING CHAIR SKU : HALX/37199/A/HB , * ALL OVER SIZE IS : 673MM(L)X 508MM(D)X 1270MM(H) , * THE CHAIR MADE OF FULL NATURAL LEATHER IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH EXTRA PADDED DESIGNED FOR MORE CONFIRMT AT WORKPLACE IN CONTEMPORARY STYLE . DETAILS : * ARMS : WOODEN ARMS WITH LETHER PADDING ARM REST ARE FITTED TO THE SEAT & BACK . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT . * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK .BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : MULTI-LOCKING KNEE TILT MECHANISM . SEAT MAXIMUM HEIGHT IS 580MM & MINIMUM HEIGHT IS 500MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1270MM & MINIMUM HEIGHT IS 1219MM * GAS LIFT 80MM TELESCOPIC HAUDRAULIC * BASE : THE PRONG (BASE) IS MADE OF SOILD WOOD WITH POLISHED AND FITTED WITH 5 NUMBERS. TWIN WHEEL CASTORS (CASTOR WHEEL DIA. 50MM) & 700MM PITCH CENTER DIA (740MM WITH CASTORS) . * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
HALX/371000/MB. : MEDIUM BACK NATURAL LEATHER UPHOLSTERED WITH SOFT TOUCH LEATHER FABRIC CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - ULTRA CHAIR , TYPE : * MEDIUM BACK 360° DEGRE REVOLVING CHAIR SKU : HALX/371000/A , * ALL OVER SIZE IS : 660MM(L)X 500MM(D)X 1100MM(H) , *THE CHAIR MADE OF FULL NATURAL LEATHER UPHOLSTERED WITH SOFT TOUCH LEATHER UPHOLSTERY IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : WOODEN ARMS WITH LETHER PADDING EXTRA PADDED WOODEN HANDLES FOR COMFORT . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT . * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK .BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : MULTI-LOCKING CENTER TILT MECHANISM . THE BACK SIZE IS 660MM(L)X 625MM(H) , BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1100MM & MINIMUM HEIGHT IS 1000MM * GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : THE PRONG (BASE) IS MADE OF SOILD WOOD WITH POLISHED AND FITTED WITH 5 NUMBERS. TWIN WHEEL CASTORS (CASTOR WHEEL DIA. 50MM) & 700MM PITCH CENTER DIA (740MM WITH CASTORS) . * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
5 SEATER MODERNIST CLASSIC DESIGN SKYLER SOFA SKU : SKYLER SIZE : 1960MM(L) X880MM(D)X 760MM(H) AND 1 SEATER SIZE SIZE : 840MM(L) X880MM(D)X 760MM(H) MATERIAL : NATURAL LEATHER / STYLE : CONTEMPORARY COLOUR : BROWN-MUSHROOM / FINISH : MATTE. * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM NATURAL LEATHER MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1960MM(L) X880MM(D)X 760MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT NATURAL LEATHER, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME. * COMBINATION CONSTRUCTION STRUCTURE ARE MADE IN MOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 32 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,66MM THICK BACK FOAM HAVING 32 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 32 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH NATURAL LEATHER IN BROWN-MUSHROOM COLOUR, IT COMPLEMENTS THE MODISH LEGS ARE MADE BY UNIQUE SHAPE IN SLEEK STAINLESS STEEL MATERIAL. ( SEAT : 1680 MM(L) X 515 MM(D) X 450MM(H) , ARMS HEIGHT @ 590MM / BACK HEIGHT @ 350MM ), * THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK , FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
Material & Subtype Glass - Clear Glass Table Top Material Clear Glass Leg Material Metal Finish Glossy Colour & Colour Family Clear Glass Dimension (W)1300mm X (D)650mm X (H)430mm Table Top Thickness 15mm Size Standard Style Contemporary Assembly Type Knock Down SKU ZEE/34475
3 SEATER MODERNIST CLASSIC DESIGN JESSE SOFA SKU : JESSE/3 SIZE : 1760MM(L) X720MM(D)X 845MM(H) MATERIAL : PREMIUM LEATHERETTE / STYLE : CONTEMPORARY COLOUR : GREEN-ADVO GREEN / FINISH : MATTE. * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1760MM(L) X720MM(D)X 845MM(H) WITH SOLID WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE/CLASSIC BUTTON-TUFTING, THE PANELLED BACK AND SOLID WOODEN ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME. * COMBINATION CONSTRUCTION STRUCTURE ARE MADE IN MOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).STRUCTURE FRAME SHALL BE CONSTRUCTED FROM SOLID WOOD WOODEN FRAMING IS HIGHLY DURABLE. THE SEAT & BACK STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 40 +/- 5 DENSITY IN SEAT 40MM THIK,40MM THICK BACK FOAM HAVING 40 +/- 5 DENSITY FOAM USED ,SEAT & BACK STRUCTURE SHALL BE COVERED WITH IN GREEN-ADVO GREEN COLOUR, IT COMPLEMENTS THE MODISH LEGS ARE MADE BY SQUARE SHAPE IN SOLID WOOD MATERIAL. ( SEAT : 440MM(H) , BACK HEIGHT @ 470MM ). * THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK , FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
Material & Subtype Solid Wood - Beech Wood Table Top Material Clear Glass Frame Material Solid Wood Leg Material Solid Wood Finish Matte Colour & Colour Family Brown - Walnut Dimension (W)1130mm X (D)630mm X (H)410mm Size Standard Style Contemporary Assembly Type Knock Down SKU HOPPER/A/CT
PRODUCT: OFFICE DESK DWS/34723 SKU IS DWS/34723 OFFICE DESK DESK STRUCTURE OF L SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 1500MM(L)X 600MM(D)X 750MM(H) 25MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE . MODESTY PANNEL 18MADE OF MM THICK . *PROVISION OF SIDE UNIT OF SIZE IS 900MM(L)X 450MM(D)X 750MM(H) ,(COMBINATION CONSTRUCTION WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP, LEFT SIDE TABLE TOP BASED ON A 18MM THICK SIDE PANNEL ENGINEERED WOOD & FROM RIGHT SIDE UNIT HAVE 2 SLIDING DOOR + 1 FIXED SHELVE . *SIDE UNIT SIZE 900MM(L)X 450MM(D)X 750MM(H), IN PROVIDED WITH LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF SIDE UNIT IS 18MM THICK ALONG WITH FECIA OF SLIDDING SHUTTERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
UTRC/33207/MB : MEDIUM BACK LEATHERETTE CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - MARSHAL CHAIR , TYPE : * MEDIUM BACK 360° DEGRE REVOLVING CHAIR SKU : UTRC/33207/MB , * ALL OVER SIZE IS : 660MM(L)X 525MM(D)X 995MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : FIXED ARMS P.P. CONNECTED WITH SEAT AND BACK . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : CENTRE TILT MECHANISM . * ONLY SEAT SIZE IS 525MM(L)X 525MM(D)X 490MM(H) & THE BACK SIZE IS 660MM(L)X 535MM(H) , SEAT MAXIMUM HEIGHT IS 490MM & MINIMUM HEIGHT IS 410MM & BACK MAX HEIGHT IS @ 995MM . * GAS LIFT 80MM TELESCOPIC HAUDRAULIC * BASE : 650MM NYLON BASE WITH 55 MM CASTORS * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
ANJIS/32002 : FIX MULTI PURPOUSE LEATHERETTE CHAIR IN BLACK COLOUR WITH MATTE FINISH SPECIFICATION : DURIAN - - OFFICE SEATING - - ANJIS/32002 CHAIR , TYPE : * FIX CANTILEVER , * ALL OVER SIZE IS : 595MM(L)X 510MM(D)X 875MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : PADDED ARMREST. * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD (IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * ONLY SEAT SIZE IS 500MM(L)X 510MM(D)X 455 MM(H) & THE BACK SIZE IS 440MM(L)X 595MM(H) , BACK HEIGHT IS @ 440MM . * BASE : 4 LEGS METAL POWDER COATED * THE PRODUCT BY THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK AND FSC CERTIFIED.THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
THREE SEATER WAITING AREA CHAIR -CARSON/3 MATERIAL : STAINLESS STEEL SIZE 1623MM(L)X 640MM(D)X 850MM(H) COLOUR : BLACK, * SUPPLYING AND PLACING IN POSITION OF A SINGLE SEATER WAITING AREA CHAIR SIZE IS 1623MM(L)X 640MM(D)X 850MM(H).THE SEAT IS MADE OF HIGH DENSITY SELF SKIN PU FOAM REFORCED WITH 3MM M.S. PERFORATED SHEET INSERT. THE PU FOAM HAVING DENSITY OF 520±10 KG/M3 WITH SHORE 'A' HARDNESS OF 55±5. SEAT SIZE SHALL HAVE BE 520 MM 465 MM D. THE BACK SHALL BE MAED FROM HIGH DENSITY SELF SKIN PU FOAM REFORCED WITH 3MM M.S. PERFORATED SHEET INSERT. THE PU FOAM HAVING DENSITY OF 520±10 KG/M3 WITH SHORE 'A' HARDNESS OF 55±5. BACK SIZE SHALL BE 520 MM W X 515 MM H. CROSS BEEM SHALL BE MADE UP OF M.S. E.R.W. SQUARE TUBE OF SIZE 60±0.005MM X 6.0±0.005MM X0.18±0.0016 MM THICK SHOULD BE FINISHING WITH EPOXY POLYESTER GREY POWDER COATED TO THE THICKNESS OF 50-60 MICRONS(+/-5 MICRON) AS PER APPROVED SHADES,FITTED WITH POLY PROPELENE AND CAPS. LEGS AND ARMREST SHALL BE MADE UP OF POWDER COATED HIGH PRESSURE ALUMINIUM DIE CAST. LEGS ARE FITTED WITH SOFT GRIP PVC LEVEL ADJUSTING SHOES.THE STEEL GRADE 202 HIGH YIELD STRENGTH AS PER IS:513 & IS:304 GRADE. * THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
4 Bay Mechanical Drive Compactor,Technical Specification *Verticals: - In 0.8 mm Thickness CRCA sheet & shall be in 8-fold Box Type design in full panel form. * Shelves: - In 0.8mm Thickness in 10 fold design to take a load of 60 kgs UDL. *Center Partition : In 0.8 mm Thickness, shall be in full sheet in 2 parts & each shall have 2 nos. ribs for strength & rigidity, this shall be used as center partition for DFM. *The Backs of the Single Fixed unit shall be closed by Box Type Covers. *Base Frame: - Shall be fabricated from formed channels of size 40 x 100 x 3mm thick made from HR steel & internal supports in 2mm HR.DFM- 3605mm W x 900mm D x 2100mm H ,SFM- 3605mm W x 475mm D x 2100mm H ,SFF- 3605mm W x 475mm D x 2100mm H
DFM- 3605mm W x 900mm D x 2100mm H
SFM- 3605mm W x 475mm D x 2100mm H
SFF- 3605mm W x 475mm D x 2100mm H
THREE SEATER WAITING AREA CHAIR -CARSON/3 MATERIAL : STAINLESS STEEL SIZE 1623MM(L)X 640MM(D)X 850MM(H) COLOUR : BLACK, * SUPPLYING AND PLACING IN POSITION OF A SINGLE SEATER WAITING AREA CHAIR SIZE IS 1623MM(L)X 640MM(D)X 850MM(H).THE SEAT IS MADE OF HIGH DENSITY SELF SKIN PU FOAM REFORCED WITH 3MM M.S. PERFORATED SHEET INSERT. THE PU FOAM HAVING DENSITY OF 520±10 KG/M3 WITH SHORE 'A' HARDNESS OF 55±5. SEAT SIZE SHALL HAVE BE 520 MM 465 MM D. THE BACK SHALL BE MAED FROM HIGH DENSITY SELF SKIN PU FOAM REFORCED WITH 3MM M.S. PERFORATED SHEET INSERT. THE PU FOAM HAVING DENSITY OF 520±10 KG/M3 WITH SHORE 'A' HARDNESS OF 55±5. BACK SIZE SHALL BE 520 MM W X 515 MM H. CROSS BEEM SHALL BE MADE UP OF M.S. E.R.W. SQUARE TUBE OF SIZE 60±0.005MM X 6.0±0.005MM X0.18±0.0016 MM THICK SHOULD BE FINISHING WITH EPOXY POLYESTER GREY POWDER COATED TO THE THICKNESS OF 50-60 MICRONS(+/-5 MICRON) AS PER APPROVED SHADES,FITTED WITH POLY PROPELENE AND CAPS. LEGS AND ARMREST SHALL BE MADE UP OF POWDER COATED HIGH PRESSURE ALUMINIUM DIE CAST. LEGS ARE FITTED WITH SOFT GRIP PVC LEVEL ADJUSTING SHOES.THE STEEL GRADE 202 HIGH YIELD STRENGTH AS PER IS:513 & IS:304 GRADE. * THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
PRODUCT: DIRECTOR DESK THEON SKU IS THEON PREMIUM SUITES EXECUTIVE TABLE STRUCTURE OF L SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 1800MM(L)X 1000MM(D)X 750MM(H) 45MM THICK TABLE TOP MADE OF HP LAMINATE POST FORM WORK SURFACE WITH WARM FINISH IN BLACK OAK POSTFORMING EDGES IN MATCHING COLOR. SIDE PANNEL IS MADE OF 45MM THICK . * PROVISION OF SIDE UNIT OF SIZE IS 1000MM(L)X 500MM(D)X 720MM(H) ,(COMBINATION CONSTRUCTION BELOW TABLE TOP SIDE UNIT HAVE 1 OPEN FIXED SHELVE WITH 3 DAWERS + 2 OPENABLE DOORS . * MOBILE PEDESTAL OF SIZE 450MM(L)X 400MM(D)X 630MM(H) , HAVING 2 DRAWERS + 1 FILLING DRAWER WITH CASTORS IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. * ALL THE MDF BORAD ARE IS-14587-1998 WITH CONFIRM TO DIN 68861.ISO 9001- 2015 QUALITY CERTIFICATION CONFIRMING TO ASTM D 4499 STANDARDS FOR VISCOSITY AND THERMAL STABILITY . * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
PRODUCT: MERIDIAN SKU IS MERIDIAN DIRECTOR DESK DIRECTOR TABLE STRUCTURE OF L-SHAPE DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 2000MM(L)X 950MM(D)X 760MM(H) 50MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH GLOSSY WALNUT FINISH SAME MATCHING EDGE BANDING MADE OF SAME MATTE FINISH. SIDE PANNEL IS MADE OF 45MM THICK. * PROVISION OF SIDE RUNNER/A OF SIZE IS 1400MM(L)X 400MM(D)X 660MM(H) ,(CONSTRUCTION IS 1 OPENABLE DOOR + 1 OPEN SHELVE FOR CPU BACK SIDE HAVE 3 HOLES ,IN BETWEEN BOTH 1 KEY BOARD TRAY WITH TELESCOPIC CHANNEL& 1 OPEN BOX STORAGE (L) 550MM X (H) 350MM FROM DOWN 1-DRAWER . * 2 DRAWERS MOBILE PEDESTAL OF SIZE 400MM(L)X 480MM(D)X 550MM(H) , HAVING 2 DRAWERS WITH CASTORS IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND GIVEN CURVED SHAPED UPPER DRAWER ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
PRODUCT: OFFICE DESK DWS/34757 SKU IS DWS/34757/A OFFICE DESK DESK STRUCTURE OF RECTANGULAR SHAPE . PRIMARY WORK SURFACE OVER ALL SIZE IS 1500MM(L)X 750MM(D)X 750MM(H) 50MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE . MODESTY PANNEL MADE OF MM THICK.UNDERSTRUCTURE MADE OF 50MM THICK WITH WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP. *PROVISION OF SIDE UNIT OF SIZE IS 600MM(L)X 400MM(D)X 600MM(H) ,(COMBINATION CONSTRUCTION FULL TABLE LOOK LIKE IN H-SHAPE FROM FRONT SIDE SIDE AND TABLE TOP IS BASED ON 2 + 2 80MM THICK BOXES SHAPE MADE IN SAME AS ENGINNERED WOOD TABLE IS MADE IN A DIFFERENT STYLE RIGHT SIDE FIXED PEDESTAL WITH 3 DRAWERS + LEFT SIDE ON FILLING STORAGE SHELVE. *1 FILING BOX FIXED PEDESTAL + 1 FIXED PEDESTAL WITH 3 EQUAL DRAWERSIN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
MODULAR WORKSTATION -NON SHARING + SHARING MODEL: 65 SERIES-L-SHAPE , SKU : 65/5X5-C PER SEATING SIZE : 1500MM(L)X 600MM(D)X 1200MM(H), WHOLE CLUSTER SIZE : 3000MM(L)X 1500MM(D)X 1200MM(H). * SUPPLYING AND PLACING OF LINNER WORKSTATION,67MM THK SLIDING TILE BASE PARTITION OF 1200MM HEIGHT , TABLE TOP SIZE IS 1490MM-1490MM (L) x 592(D) * PROVIDING AND SUPPLYING PENTA L'SHAPE WORKSTATION TWO SEATER UNIT NON SHARING IN COMPLETELY KNOCK DOWN CONDITIONS WITH AN OVERALL SIZE 3000MM(L)X 600MM(D)X 1200MM(H) THAT IS TO BE ASSEMBLED AT SITE. THE WORK TOP SHALL HAVE THE SIZE 1490MM-1490MM (L) x 592(D) MADE UP OF 25MM THICK PRE- LAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST . OF IS LEVEL WITH APPROVED LAMINATE AND FINISH AS PER APPROVED SHADE. * THE PROFILE OF THE TOP SHALL BE IN RECTANGLE SHAPE AND THE EDGES SHALL BE SEALED WITH 2MM THICK THIN STRIP OF IMPERMEABLE PVC THAT IS CUT TO FIT THE SIZE OF BOARD PANEL AND DULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS. * THE TOP TRIM, TOP BAR, MID BAR, VERTICAL BAR, RACEWAY, SKIRTING SHALL BE MADE UP OF ALUMINIUM EXTRUSIONS (PRE-TREATED) AND DULY POWDER COATED WITH POLYESTER POWDER COATING 40P-60P THICK . THE TRIMS SHALL HAVE THE SIZE 67MM X 19MM WITH 1.5MM THICK COVERED WITH DIE CAST END CAPS ON JOINTS 2 WAYS, 3 WAYS & 4 WAYS (L-COVER FOR CORNER, T-COVER FOR MIDDLE SECTION WHEREVER REQUIRED). THE ALUMINIUM RACEWAY SHALL BE SITUATED BELOW THE WORKTOP WITH AN OVERALL SIZE 149MM(H) X 60MM(D) WITH 1.4 MM COVER THICKNESS AND 2MM BACK THICKNESS AS PER REQUIREMENT OF INLAYING THE ELECTRICAL MANAGEMENT AND CARRYING THE WIRE HORIZONTALLY. *THE EXPOSED VERTICAL AND HORIZONTAL FACES OF THE FRAMES SHALL BE SNAP FITTED WITH TRIMS. THERE SHALL BE SOFT-BOARD (WITH FABRIC) AND MARKER BOARD PROVIDED AT FRONT OF THE USER. LAMINATED TOP TILE AND BOTTOM TILE SHALL BE SITUATED AT BOTH SIDES OF THE USER AND BELOW THE WORK TOP RESPECTIVELY. THE PARTITION SHALL HAVE CONCEALED WIRE MANAGEMENT CAPABILITIES AND SHOULD BE ENGAGED FOR RESPONSIVE AND SAFE OPERATIONS OF POWER, TELECOMMUNICATIONS AND DATA (LAN) AND HAS SEPARATE COMPONENTS FOR ELECTRICAL, DATA AND TELEPHONE CABLES HAVING ADEQUATE CAPABILITY OF BOTH THE VERTICAL AND HORIZONTAL WIRE MOVEMENTS. SLOTS/CUT-OUTS SHOULD BE GIVEN ON RACEWAYS TO FIX ALL ELECTRICAL AND DATA POINTS. SINGLE SIDED PVC WIRE MANAGER SHOULD BE ENCLOSED AT TABLE TOP.ADJUSTABLE LEVELLER SHOE SHALL BE PROVIDED AT BOTTOM OF THE PARTITION TO AVOID SCRATCHES ON THE FLOOR.PARTICLE BOARD OF GRADE II OF IS LEVEL. * THREE LAYER PRELAMINATED PARTICLES BOARD (WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST . * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
DWS/34725 BACK UNIT STORAGE MATERIAL : PRELAMINATED PARTICLE BOARD , BACK UNIT SIZE : 1500 MM (L)X 400 MM (D)X 1200 MM (H). COLOUR : SLATE GREY, MAPLE & FINISH : LAMINATE FINISH . * PROVIDING & SUPPLING PLACING POSITION OF MODULAR BACK UNIT TOP SHALL BE MADE FROM 25 MM THICK PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST. * WHILE REST OF THE SIDES AS WELL AS SHELVES AND SHUTTER TO BE MADE UP OF 18 MM THICK PRELAMINATED PARTICLE BOARD. MACHINE PRESSED EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXED DULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS. * STORAGE UNIT WITH 4 SHUTTERS CONSTRUCTION IS 2 OPENABLE DOORS WITH 2 FIXED SHELVE PER CARCASS SIZE IS 770 MM (L) X 352 MM (H) + 2 OPENABLE DOOR WITH 2 FIXED SHELVE PER CARCASS SIZE IS 770 MM (L) X 352 MM (H) , IN PROVIDED WITH 2 UNIVERSAL CAM LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVER ALL HEIGHT OF PRODUCT IS @ 1200 MM . * EACH SHUTTER SHOULD BE FIXED WITH REQUIRED NUMBERS HINGES, SS TOWER BOLT OF 100 X 10, DOUBLE STRIP MAGNETIC CATCHER AND DRAWERS SHALL HAVE 100 MM SIZE SS FANCY HANDLES (ONE ON EACH DRAWER) WITH NECESSARY HARDWARE/ FITTING/ HINGES ETC. OF APPROVED QUALITY(MAKE: EBCO).FOR INSTALLATION OF SIDE UNIT WOODEN DOWELS AND MINIFIX TO USE FOR ADDITIONAL SUPPORT. * THREE LAYER PRELAMINATED PARTICLES BOARD ( WOOD PRODUCT ) OF GRADE II TYPE III OF IS 12823/LATEST. * THE SELLER / COMPANY SHOULD BE ISO 9001:2008, ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, OHSAS 18001:2007,GREENGUARD, GREEN PRO, AIOTA, INDIAN DESIGN MARK COMPLIANT. THE BIDDER SHOULD EITHER OFFER PRODUCTS HAVING GRIHA COMPLIANCE OR THE OEM SHOULD HAVE FSC CERTIFICATE . THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
CONFERENCE TABLE - MATERIAL : PRELAMINATED PARTICLE BOARD CONNECTING PART SIZE : 1200MM(L)X 600MM(D)X 750MM(H), S.P-1 SIZE-1350X600X750 * PROVIDING & SUPPLYING OVAL - SHAPE MODERN DESIGN CONFERENCE TABLE & IN BETWEEN U SHAPE TABLE TOP LENGTH IS @ 1350 MM, TABLE TOP OFFERS YOU A GENEROUS WORKSPACE,DESK PRIMARY WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 1200MM(L)X 600MM(D)X 750MM(H) TABLE TOP MADE OF 36MM THICK WHICH GIVE MORE SURFACE AREA FOR WORK ,MACHINE MADE MODULAR FURNITURE MADE PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST, * CONSTRUCTION PROVISION OF CONFERENCE TABLETOP SUPPORTED WITH 18MM THICK SIDE PANNELS IN BROWN-BLACK OAK COLOUR MADE BY PRELAMINATED PARTICLE BOARD AND BELOW THE TOP 18MM THICK PRELAM PARTICLE BOARD MODESTY PANEL.OUR WORK SURFACE FURNITURE IS FINISHED WITH EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE,FIXED WITH HOT MELT GLUE. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST, * THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG".
Material & Subtype Solid Wood - Beech Wood, Veneer, Engineered Wood - MDF, Fabric - Velvet Table Top Material Engineered Wood Frame Material Solid Wood Upholstery Material Fabric Seat Material Fabric Leg Material Solid Wood Finish Matte Colour & Colour Family Brown - Dark Oak,Blue - Navy Blue Dimension Of Table (W)1890mm X (D)970mm X (H)755mm Dimension Of Chair Chair (W)450mm X (D)455mm X (H)910mm, Bench (W)1590mm X (D)390mm X (H)500mm Seating Capacity 6 Seater Seating Height 475mm Table Top Thickness 54 Size Grand Style Mid-Century Modern Assembly Type Knock Down SKU FLORENCE/A
Trees & Palms--The rate of the following item include for supply of plants as specified , transportation to site , excavation of pits as followsa)0.9 x 0.9 x 0.9m for trees-Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume(2 parts of stacked volume of earth after reduction by 20%:1 part of stacked volume of manure after reduction by 8%) flooding with water dressing. Supply, transportation and mixing of soil improvement nutrients as required and inside coat of Aldrine in all pits flooding with water , dressing including removal of rubbish & surplus earth if any with all leads & lifts , planting and stacking in full and final location including all locations specified . Maintenance of plants for a period of 3 months , replacement of any dead & sickly plants in this period , supply & spraying of insecticides as required .-All Trees shall be multi branched (atleast 4-6 branches) with well developed canopies
Alstonia scholaris
Delonix regia
Ficus blackea (Topiary)
Ficus panda (Topiary)
Jacaranda mimosaefolia
Samanea saman
Plumeria alba
Supplying and Fixing Bamboos, Palms & Cycads
Bamboosa ventricosa
Borassus flabellifer
Caryota urens
Hyphorbe indica
Beaucarnea recurvata
Shrubs , Climbers & Specimen Plants -The rate of the following item include for supply of plants as specified , transportation to site , excavation of pits as follows :-a)0.6 x 0.6 x 0.6 m for large shrubs & planters-Filling pits with prepared manure soil (ratio 1:2 i.e.1 sludge : 2 good earth by vol.) Supply, transportation and mixing of soil improvement nutrients as required , inside coat of Aldrin in all pits , flooding with water, dressing including removal of rubbish & surplus earth if any with all leads & lifts , ,planting and stacking in full and final location including all locations specified and maintenance of plants for a period of 3 months , replacement of any dead & sickly plants in this period , supply & spraying of insecticides as required -The canopies of shrubs should touch each other at the time of installation.-Ground Cover-The rate of the following item include for supply of plants as specified , transportation to site , excavation of beds as follows :-0.30 m in depth. Filling bed with prepared manure soil (ratio 1 sludge plus 2 good earth by vol.) Supply, transportation and mixing of soil improvement nutrients as required and inside coat of Aldrine in all pits, flooding with water, dressing including removal of rubbish & surplus earth if any with all leads & lifts ,planting and stacking in full and final location including all locations specified and maintenance of plants for a period of 3 months , replacement of any dead & sickly plants in this period, supply & spraying of insecticides as required .-Ground Cover ( Ground Cover areas are given Sqmts. A carpet effect is required at time of installation if not otherwise specified )
Shrubs and Ground Cover
Acorus gramineus
Begonia semperflorens
Chrysogonosn virginnum
Delosperma cooperi
Gardenia jasminoides
Golden duranta
Impatiens walleriana
Iresine
Supplying and fixing Climbers
Petria volubilis
Allamanda spp.
Star jasmine
a) Trenching in ordinary soil upto a depth of 30 cm including removal & stacking of serviceable materials.b) Rough dressing the trenched ground uprooting weeds flooding with water.b) Rough dressing the trenched ground uprooting weeds flooding with water.d) Fine dressing the ground.e) Grassing with specified grass including watering until establishment of the lawn.f) Final levelling by spreading sand & good earth mixture,manuring as & when directed.
Maintenance-Paid maintenance of plants for a period of 3 months after free maintaenance period is over. This shall include replacement of any dead and sickly plants in this period, providing and mixing of manure in soil and spraying of insectisides as required.
Providing and Fixing Wika Direct Mounting Pressure Gauge Assemble with Gate/Ball Valve -Nominal Size of the Dial-40mm,Measurement Range-0-400,Material of case-Stainless Steel-Gr 304,Material of Dial Plate-Aluminium,Material for Window cover-Transpartent Acrylic,Overall Dimension-500mmX500mmX50mm
Providing and fixing Pressure Sensor / Switch for Automatic Start of Pumps suitable for SML ISUZU (LP 604002),Product ID-5116877-88659280380
Providing and Fixing Air release Valve 150 mm Dia
Providing and fixing 25 mm nominal gun metal gate valve class I with CI wheel of approved quality with union (Screwed end)
Supplying and fixing of hose cabinet of size 450mm x 450mm x 250mm made of 2mm thick M.S. sheet with 6mm thick glazed glass door including necessary locking arrangment suitable to accomodate external hydrant with butterfly valve, 1 nos. 15 mtr. long hose pipe, 1 no. branch pipe mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect for external hydrant as required complet in all respects. Make:Winco/Atasi/Safeguard/Asco
Wrapping and coating of antirust PYPKOTE on 150 mm dia MS pipes including primer / black japan on external pipelines
Providing and fixing of Dry Chemical Powder (Stored Pressure Type) Mono Ammonium Phosphate 50% powder confirming to ‘IS 14609’ , Nitrogen Pressurized, Controllable Discharge Mechanism, Pressure Gauge, Discharge Hose & Nozzle Epoxy Polyester Powder Coated As per ‘IS 15683’ ISI mark Fire Extinguishers. Operating Temperature: - (-) 10oC to (+) 55oC Suitable for ‘A’ ‘B’ ‘C’ Class of FIRE complete in all respects (6 Kg Capacity). Make:Atasee/Minimax/Intime/Safeguard
Providing and Fixing of Carbon Di-oxide Type , Gas Confirming to IS ‘15222’ , Cylinder Confirming to ‘IS 7285’ & PESO approved ,Controllable Discharge Mechanism, Discharge Hose & Horn As per ‘IS 15683’ & ‘IS 2878’ ISI mark Fire Extinguishers (Wheel Type or Squeeze Grip Type). Operating Temperature :- (-)10oC to (+)55oC Suitable for ‘B’ ‘C’ Class of FIRE (4.5 Kg Capacity). Make:Atasee/Minimax/Intime/Safeguard
Providing and fixing of automtic type modular fire extinguishers Dry Chemical Powder (Stored Pressure Type) Mono Ammonium Phosphate 50% powder confirming to ‘IS 14609’ , Nitrogen Pressurized, Controllable Discharge Mechanism, Pressure Gauge, Discharge Hose & Nozzle Epoxy Polyester Powder Coated As per ‘IS 15683’ ISI mark Fire Extinguishers. Operating Temperature: - (-) 10oC to (+) 55oC Suitable for ‘A’ ‘B’ ‘C’ Class of FIRE complete in all respects (5 Kg Capacity). Make:Atasee/Minimax/Intime/Safeguard
Supplying and Installing Passenger Elevator ,Specification -Type & Capacity-Passenger – 6 Persons –884 Kg,Speed-1.0 Mtr/Sec (approx.),Type of Drive- Variable Voltage Variable Frequency Drive with Microprocessor based Simplex Full Collective Control,Location of Machine -Gearless Machine (With Machine room ),Required Travel-26.0Mtrs. (max.),Required Travel-26.0Mtrs. (max.),serving-Basement+Lower Ground Floor+UGF to 2nd Floor ,Well Size-1500 mm Wide x 1400 mm Deep (over Plaster) ,Power Supply-415 V three-phase 50 cycles alternating current,Required Pit Depth-1500 mm.,Required Head Room-1500 mm,Car Enclosure-Vandal Proof Finish,Flooring-Flooring,Electric Light-LED Light fitting,Fan-400/300mm Sweep One Number,No. of Entrances-One Location – Front,Car Entrance-Automatic Power Operated Center Opening Vandal Proof Steel Doors - with Vision Panel(290mm X 590mm) ,Landing Entrance-Automatic Power Operated Center Opening Vandal Proof Steel Doors - with Vision Panel(290mm X 590mm),Clear Opening-800 mm Wide x 2100 mm High,Indicators: Car & Landings-Direction & Position Indicator.
Add 18 % GST
Add 1% Labour Cess
HEIGHTEN CONSTRUCTIONS
NIRANJAN RAI
SARYUG GAUTAM CONSTRUCTION PVT LTD
Sanjay Sharan
M/S SADANAND GUPTA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid