Improvement of Road and Drain by C.C from h/o Anand to H/O vipin at R.K. Puram in ward62 Zone02

E/W cutting and Filling or ion embankment in ordinary soil exavation to be done pits not exciding 1.5 including all completion of work

Construction of granular Sub base (GSB) etc all complete.

Earth work in Excavation in trenches for foundations pipes Cables etc in ordinary soil (loan clay or sand) including lift up to 1.5 mtr lead up to 50 mtr and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer-in charge with in distance of 50 mtr.

Providing and laying Cement concrete (1:6:12,1 Cement:6 fine sand:12 Brick ballast nominal size 40mm) and curing complete, including cost of form work in foundation and floors.

12mm Thick Cement plaster1;4 in single coat on Both side of single or half brick wall for interior plasting upto flor two level including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finishing even and smooth.

Class-150 Brick workin (1:4) cement mortar in Foundation & Plinth including supply of all Materials Labour and Tool & Plants etc, required for proper completion of the work.

Construction of gullypit 0.60x0.60x0.75 as per KNN design etc all work

Providing and Laying 125 micron polythen sheet including all labour work.

Providing and Laying Pre Moulded joints filler 12mm thick for expention including all labour work

Provinding and laying desing mix cement Concrete of M-30 grade, in roads/ Taxi tracks/ runways,using Cement Contest as per design mix, using coarse sand and graded stone aggreate of 40mm nominal size in appropriate proportions as per approved and Specified design criteria providing dowel bars with Sleeve/ tie bars wherever required, laying at dite, spreading and compacting mechanically by using needle and surface vibrators, lavelling to required slope/ Camber, finishing with requied texture, including texture, including steel from work with sturdy M.S.Channel sections.curing. making provision for contraction/ expansion, construction and longitudinal joints (10mm widex 50mm deep) by groove cutting machine, providing and filling joints with approved joints filler adn sealants, complete all as per direction of Engineering charge(items of joints fillers sealants dowel bars with sleeve/ tie bars to complete the work.