Provision of Hockey Play Ground

Items/Store required for provision of Hockey Play Ground with accessories and Kit in Boys High School in Ward No 1 at village Simbal Camp

Providing leveling of ground earth including 20 Mtr down Earth

Hockey Ground Post Complete Set with fitment

Hockey accessories and Kit to Hockey Team

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : cement mortar 1 :6 (1 cement : 6 coarse sand)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75m m thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling & dressing & finishing the top smooth.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost centering, shuttering, finishing and reinforcement – 1:1:5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricker of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S.( non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement : 4 coarse sand)

Reinforced cement concrete work in beams, suspended floor, roofs having slope up to 15” landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1:5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for : (a) Suspended floors, roofs, landing, balconies and access platform.

Centering and shuttering including strutting, propping etc. and removal of form for : (b) Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.R.C. work including traightening, cutting, bending, placing in position and binding all compete upto plinth level. Thermo-Mechanically Treated bars.

Steel reinforcement for R.R.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars.

12 mm cement plaster of mix : 1:6 (1 cement : 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement : 6 fine sand)

12 mm cement plaster finished with a floating coat of neat cement of mix 1:4: (1 cement :4 fine sand)

6 mm cement plaster of mix 1:3 ( 1 cement : 3 fine sand)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 aqm)

Applying one coat of water thinkable cement primer of approved brand and manufacture on wall surface

Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 250 x 16 mm

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10mm

Providing and fixing ISI marked oxidized M.S. handles conforming to IS: 4992 with necessary screws etc. complete : 100 mm

Providing and fixing 1 mm thick M.S. sheet door with frame of 40 x 40 x 06 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer

Providing and fixing T- iron frames for doors, windows and ventilators of mild steel tee section, joints mitred and welded with 15 x 3 mm lugs 10 cm long embedded in cement concrete blocks 15 x 10 x 10 cm of 1 :3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plug and screws or rawl iplugs and screw or with dash

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 litre low level controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre lwo level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making goods the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including paintaing of fitting and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basing size 550 x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing P.V.C. waste pipe for snik or wash basin including P.V.C. waste fittings complete Semi rigid pipe 32 mm dia

Providing and fixing 100 mm sand cast iron grating for gully trap.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic molded frame of approved make and shade with 6mm thick hard board backing rectangular shape 450 x 350 mm (outer dimension)

Providing and fixing 600 x 120 x 5mm glass shelf with edges rounded off supported on anodised aluminum angle frame with CP brass brackets and guard rail complete fixed with 40mm long screws raw/plugs etc complete

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78mm wide and effective height of 88 mm, weighing not less than 170 gm

Providing and fixing GI pipes complete with GI fitting and clamps including cutting and making good the walls etc internal work (a) 20 mm dia nominal bore

Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls etc concealed pipe including painting with anti corrosive bitumastic paint cutting chasses and making good the wall 15 mm dia nominal bore

Providing and fixing brass bib cock of approved quality 15 mm nominal size

Providing and fixing brass stop cock of a proved quality 15 mm nominal bore

Providing and fixing gun metal gate value with CI wheel of approved quality (screwed end) 20 mm nominal bore

Providing and fixing ball valve (Brass of approved quality complete 20 mm nominal bore)

Providing and fixing unplasticised PVC connection pipe with brass unions 15 mm nominal bore. 30 cm long

Providing and fixing GI union in GI pipe including cutting and threading the pipe and making long screw etc complete (New work) 20 mm nominal size (a) 20 mm dia nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI 12701 marked indicating the BIS license No with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and the basse support for tank (Sintes , Electroplate, Lotus or equivalent having valid ISI license

P/L cement concrete 1:5:10 (1 : cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of SW pipe including bed concrete as per standard design 10 mm dia SW pipe 100 mm diameter SW pipe

Constructing brick masonry manhole in cement mortar 1 : 4 (1 cement : 4 coarse sand) with R.C.C. to slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : inside size 90 x 80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions , total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing soak pit 1.20 x 1.20 x 1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.

Providing and laying ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) or 1st quality conforming to IS : 15622 of approved make in colours such as white, lvory, grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc) complete

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

M/S STAR WANI HARDWARE STORE

M/S ZAHOOR AHMAD WANI