Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-Finance 5 21A KRISHNANAGAR INAM MANIYACHI KOVILPATTI THOOTHUKUDI 628503 | TUTICORIN | TAMIL NADU | 628503 | ₹3.6 L | L1 | Accepted-Finance Least value |
| 2 | L2₹4.0 L+₹39,278.14 (11.0%)Accepted-Finance | ₹4.0 L+₹39,278.14 (11.0%) | L2 | Accepted-Finance Second least value |
| 3 | L3₹4.1 L+₹47,700 (13.3%)Accepted-Finance | ₹4.1 L+₹47,700 (13.3%) | L3 | Accepted-Finance Third least value |
| 4 | L4₹4.8 L+₹1.2 L (34.2%)Accepted-Finance | ₹4.8 L+₹1.2 L (34.2%) | L4 | Accepted-Finance Highest value |
| Sl No | Description | Qty | Unit | SBM ENGINEERING AND SUPPLIES L4 | MR.BALASUBRAMANIAN, CONTRACTOR L3 | PRADEEP CONTRACTORS & SUPPLIERS L1 | PARTHIBAN C L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug | 45 | Cum | 9,800 ₹4,41,000 | 8,200 ₹3,69,000 | 7,000 ₹3,15,000 Lowest | 8,024.94 ₹3,61,122.3 |
| 2.00 | The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug | 3 | Cum | 10,250 ₹30,750 | 8,350 ₹25,050 | 7,500 ₹22,500 Lowest | 8,229.87 ₹24,689.61 |
| 3.00 | Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod with fan clamp with side plates and cross arm of size 450mm (18") | 1 | Sqm | 4,650 ₹4,650 | 2,600 ₹2,600 | 5,000 ₹5,000 | 2,551.23 ₹2,551.23 Lowest |
| 4.00 | Supply and fixing of Table and Chair Arrangement including all cost and Conveyence of all materials and all labour charges with etc Completed | 1 | cum | 3,450 ₹3,450 Lowest | 8,550 ₹8,550 | 15,000 ₹15,000 | 8,415 ₹8,415 |
Tender Value
₹4.8 L
EMD Value
₹4,800
Closing Date
12 Aug 2026, 3:00 pmClosed
Municipal Commissioner
444, Thiruvengadam saali, Sankarankovil
Providing UPVC Partition Police Booth Arrangement for New Bus stand in Sankarankovil Municipality
2026_MAWS_687787_1
0962/2026/E1
Open Tender
Civil Works
Works
30 days
Sankarankovil Municipality
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹4,800
17 Aug 2026
22 Jul 2026
12 Aug 2026
22 Jul 2026
12 Aug 2026
22 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug | - | Cum | 1.25 | - |
| 2 | The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug | - | Cum | 1.25 | - |
| 3 | Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod with fan clamp with side plates and cross arm of size 450mm (18") | - | Sqm | 1.25 | - |
| 4 | Supply and fixing of Table and Chair Arrangement including all cost and Conveyence of all materials and all labour charges with etc Completed | - | cum | 1.25 | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.81 MB
BOQ_826678.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .