CWE/HSR-28 OF 2022-23 PROVN OF VEH PARKING WITH COVER SHED FOR (100/10 MTR APPROX AND HT 17 FT APPROX) B VEHS OF C COY GARAGE AT HISAR MIL STN UNDER GE HISAR

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed by Engr-in-Charge.

Hard core of Broken stone or boulders guage exc.63 mm but n exc.100 mm,deposited,spread and levelled in layers n exc.15 cm thick,watered and rolled/rammed to a true surface complete all as specified and as directed by Engr-in-Charge.

M&L for 100mm thick cement concrete type D2, 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed by Engr-in-Charge.

M&L sand for cushion and spreading and levelling in layers n. exc 25mm thick complete all as specified and as directed by Engr-in-Charge.

M&L Machine pressed precast concrete paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with grey cement and no pigment complete all as specified and as directed by Engr-in-Charge.

M&L for PCC type B-0, 1:2:4 (12.5 mm graded aggregate) as in mass concrete around the Machine pressed precast concrete paver block, as in level course as in ramp all as specified and as directed by Engr-in-Charge.

Excavating in trenches soft and loose soile n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all as specified and as directed by Engr-in-Charge.

M&L Brickwork with Old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as spesified and as directed by the Enginner-in-charge.

M&L Rendering 15 mm thick on fair faces brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing excavated material exc 500M and n.exc 1.5 Km and depositing were directed at level complete all as specified and as directed by Engr-in-Charge.

Excavation in post holes (or similar holes) each n.exe 0.5 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil all as specified and as directed by Engr-in-Charge.

M & L Cement concrete in post holes foundation fillings and mass concreting PCC1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and as directed by Engr-in-Charge.

S &F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe -410W (gd E-250) quality complete all as specified and as directed by Engr-in-Charge.

S&F, Mild steel work as in plain angle plates for securing purlins, band, strap, hold fast, cleat, hook, hinges, base tie for frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

S&F 5 to 10mm diameter of neck Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed by Engr-in-Charge.

M & L Pre-painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50mm thick, on an colour, having tensile strength of 550 Mpa as in roof fixes with self tapping screws all as specified and as directed by Engr-in-Charge.

M&L preparation of new steel surfaces of any description over 10cm in width or grith and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engr-In-charg.

M&L preparation of new untreated surfaces of walls and applying two coats of cement base paint complete all as specified and as directed by Engr-in-charge.

M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including sunk type pressed steel box covered with and including 3 mm thick new bakelite laminated sheet top cover ‘Hylam’, complete, all as specified & directed.

All as per item No. 20.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts all as specified & directed.

S&F flush type socket outlet multipurpose 3 Pin 5/6 Amp (with 2 pin outlet also) 230 volts AC complete all as specified and directed.

S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F LED light fitting 36/40 watt, regal batten for LED including ultra bright glass LED tubelight with very high efficacy, single / double side connection all as specified and directed.

S&F street light LED light fitting 35 watt, pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed.

S&F MCB single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10KA complete all as specified and directed.

S&F M.C.B. SPN, 240 Volts, 40 Amps breaking capacity 10 KA complete all as specified and directed.

S&F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 5 of 1991 (Part-I) including taking out old existing earthing complete all as directed.

M&L sub main wiring using two single core 1.5 Sqmm FRLS PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing PVC conduit (as required & directed by Engr-in-Charge) accessories like bends, tee, etc. and connecting to earth dolly and including 1.5 Sqmm earth wire, PVC insulated & unsheathed all as directed.

Supplying, laying, jointing, testing and commissioning of LT UG XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volts grade complete of size 10 sqmm 2 core all as specified and directed. (Note :- cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc complete all as specified and directed by Engr-in- Charge.)

M&L well burnt bricks sub class 'B' as in protection of cable laid dry, flat abutting each other width wise completed all as specified and directed

M&L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable completed all as specified and directed.

malik constructions