Replacement of Toilet and Bathroom Doors and Ventilators with Frame in HAL Township Nashik.

Essential/ Prequalification Criteria

Annual Turnover: Average annual financial turnover during the last 3 years, ending 31.03.2025 should be at least 30% of the approximate estimated amount put to tender. (i.e ₹ In Lakhs)

Turn over (Rs. In Lakhs)

Profit & loss statement duly certified by chartered accountant with UDIN shall be considered for evaluation of turnover for the respective financial Year.

Solvency : The solvency required will be 40% of the approximate estimated amount put to tender. The solvency certificate shall be from a nationalized or scheduled bank and issued within a period of 12 Months from the final date of submission of the tender i.e ₹ In Lakhs

Related Document to be Uploaded to eProcurement Portal.

Not meeting eligible criteria

Experience Experience of having successfully completed similar works(Refer NIT "Work Details") during last 7 years ending on the previous day of last day of submission of tender should be either of the following: [Latest work experience certificate may be uploaded] a) Three similar completed works each costing not less than the amount equal to 40% of the approx. estimated amount put to tender against each work in the tender notice. (Or) b) Two similar completed works each costing not less than the amount equal to 50% of the approx. estimated amount put to tender against each work in the tender notice. (Or) c) One similar completed work costing not less than the amount equal to 80% of the approx. estimated amount put to tender against each work in the tender notice.

40% (Three Works)

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Type of Work: [Incase of private works the same shall be supported with TDS certificate]

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

GST No Registration Number.

ESIC Registration Number

EPF Registration Number

Earnest Money Deposit (EMD) details in ₹

License: License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies.

Documents to be uploaded along with tender

Constitution, legal status along with attested copies of Deeds / Articles and Memorandum of Association, etc., as applicable.

Power of Attorney in case of Pvt. Limited/limited companies

Details of person holding the power of Attorney.

Related Document to be Uploaded in eProcurement Portal. (Original /Attested / Notarized)

Registration with HAL/ Other organization if any.

Copy of PAN card issued by Income tax authority

I.T Returns for past 03 years (Assesment Year)

Related documents to be uploaded in eprocurement portal.

Details of ECS viz.,where payments are to be credited along with the scan copy of Blank Cheque leaf

Blank Cheque leaf to be Uploaded in eProcurement Portal.

ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal.

Udertaking Annexure-K

Address for correspondence:

Contact details

Acceptance by party for Scope of work as per BOQ and Tender terms & conditions

DECLARATION

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions (Page 1 to 175) including price bid do hereby accept all the terms and conditions laid down.

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer.

Specification

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below removig serviciable material deposited to civil store as directed by EIC

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 100X58X1.90 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised outer side door (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300x16 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised in side door (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 250x16 mm

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all level Granite stone slab colour black, Cherry/Ruby red Area of slab upto 0.50 sqm

Providing and fixing aluminium work Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : etc. complete as per direction of Engineer-in-Charge.

Providing & fixing of 4.0 mm thick glass panes finished with glass putty or glazing clips in steel /aluminium doors, windows, ventilator etc. complete as per direction of Engineer-in-Charge.

Providing & fixing fly proof wire gauze to windows/ventilators, clerestory windows & doorsStainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. ., complete as per the direction of EIC.

Providing and applying 12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand) finish to concrete/ brick surfaces, in all positions and level including scaffolding, curing etc. complete as specified and as directed.

Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in in all shapes and size in Cement morter (1 : 6) (1 cement : 6 coarse sand)+10:21

Rupees Seventy Lakh Eighty Three Thousand Eight Hundred Seventy Three and Seventy Five Paise Only

Approximate Basic Amount Put to Tender

Rupees Twelve Lakh Seventy Five Thousand Ninety Seven and Twenty Seven Paise Only

Rupees Eighty Three Lakh Fifty Eight Thousand Nine Hundred Seventy One and Two Paise Only