Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹2.6 L
Closing Date
6 Aug 2026, 9:30 pm
Visvesvaraya Technological University
Junior Engineer
08312498181
9986352841
Interior works to newly constructed class room complex building to UG/PG courses including providing and supplying benches, Ceramic Hybrid white Boards, tables & Chairs etc at VTU Regional Centre, Kalaburagi
VTU/2026-27/OW/WORK_INDENT237
VTU/2026-27/OW/WORK_INDENT237
Open
Other Works
Two Tender Document System(Two Cover)
Visvesvaraya Technological University Belgaum
14 documents required · 14 mandatory
List of works for which tenders already submitted
Satisfactorily completed in last five years at least one single similar Civil work of value not less than Rs. 141.01 Lakhs contract for Central/State Government /Quasi Government Department.
Executed in any one year the following minimum quantities of work as mentioned in Tender Documents
Achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction/ Electrical/ Water supply/Sanitary works only) of Rs. 352.52 Lakhs.
The contractor should visit the site of work and obtain the site visit letter duly signed by Resident Engineer, VTU, Belagavi and submit/upload through KPPP portal
IT returns with balance sheets for the last five years have to be submitted
Bid capacity on letter head.
Liquid assets and /or availability of credit facilities of not less than Rs. 52.87 Lakhs
PAN Card copy
GST registration Certificate
Key Personnel to be deployed by the contractor at site for Contract work as mentioned in the bid document.
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded as mentioned in Tender Document
All other documents as mentioned in the bid document.
Name and Address of the Contractor for communication.
Registered Contractor Class I
₹4,410
₹2.6 L
23 Jul 2026
23 Jul 2026
7 Aug 2026
5 Aug 2026
31 Jul 2026
Interior works to newly constructed class room complex building to UG/PG courses including providing and supplying benches, Ceramic Hybrid white Boards, tables & Chairs etc at VTU Regional Centre, Kalaburagi
Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed bwp gra...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing M.S. grills/Square mess (2mm thick & 16 Gauge) of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel ...
Providing, Fixing and supplying Ceramic Hybrid white Board of approved colour & make of size 8x4 ft including cost of all materials, labour, taxes, lead, lift, loading & unloading, accessories and a...
Providing and fixing in wall lining flat pressed three layer (medium density) 25mm thick particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400 x 100 x 200mm having block density more than 1800kg/m cube and minimum compressive strength of 4.00 N/mm square conf...
Providing ceramic vitrified tile flooring of approved make shade and size for flooring laid on a bed of 12 mm thick with cement mortar 1:3 mix, flush pointing with white cement using colour pigment,...
Construction of Embankment by excavating the available approved Gravel/ Murrum/M Sand deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, sp...
Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over a...
Providing, fabricating, assembling and fixing in position aluminimum partitions using aluminium sections of mat funish or glossy finish in combination of plain grove, single grove and double grove as ...
Providing, fabricating, assembling and fixing in position aluminimum doors using following aluminium mat funish or glossy finish, outer frame plain section 101.6 x 44.45mm thickness 3.18mm, section we...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface wit...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer to give an even shade after thoroughly brooming the surface...
Painting with Silicon & Acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coats with paint of approved quality to giv...
Painting Providing & fixing 100 percentage Polyester Curtains with specification of regular wash as per direction of Engineer in charge including high quality cloth for outer side curtain and stitch ...
Executive chair High back with seat and back high quality feather touch Rexine Arms with cushioning chair to have SS base with 5 caster wheel legs along with syncro mechanism as per Arhitecture desi...
Providing supplying and installtion of Task chair of approved make made of medium back having a back finish mesh with adjustable cushioned lmber support and seat finish back fabric with high density c...
Supplying office table of size 1500mm x 750mm and 750mm high made with of 18 mm plywood table to have one side drawer unit of 45mm x 500mm deep x 650mm high with 3 drawers and other side shall have fi...
Supplying M S table table of size 1500mm x 900mm made with of 40mm x 40mm M S Square /Rectangle tubes with heavy duty frames with top 19 mm plywood external surface to be finshed with 1mm laminate an...
Supplying, Assembly and Installation of in-situ of 12 seater modular boat shape meeting table of size 1500mm x 4000mm and 750mm high including one side round corner of sie 900mm dia and 750mm high mad...
Providing & supplying Carpet/Mat of 800 plus gsm (gram per Sqmt) with stain proof, flexible and super absorbent fibre of good quality etc complete incuding cost of materials, labours, taxes, lead and...
Providing & supplying of SS finished visitor chair three seater of good quality etc complete incuding cost of tranportation, loading & unloading, materials, labours,taxes, lead and lift, Fixing, and ...
Providing and fixing brass / SS curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc.wherever necessary including fixing in position of approved ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender Document.pdf
Tender Document • 26.97 MB
Drawings.pdf
Others - Drawings • 1.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].