Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹26.3 L
Closing Date
17 Jul 2025, 8:40 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Muniraju.P
Establishing 2x20MVA,66/11KV substation at Siddapura (Beeticadu) along with Construction of 66kV DC line on DC towers from the existing 66/11kV Virajpete Sub-station to the proposed 66/11kV Siddapura Sub-station for a distance of 14.201 kms and Construction of 2 no. of 66kV Terminal Bays at 66/11kV Virajpete Substation in Virajpete Taluk, Kodagu District on Partial TurnKey basis including supply of all matching materials equipments (Excluding 11 kV Switchgears) and erection (including civil works) of all mterials/ equipments,testing and commissioning.
KPTCL/2025-26/SS/WORK_INDENT2381
KPTCL/2025-26/SS/WORK_INDENT2381
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Corporate Office Tendering and Procurement Bengaluru
16 documents required · 16 mandatory
Documentary proof for Clause No. 3.2(b)(i) of ITT such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer.
Documentary proof for Clause No. 3.2(b)(ii) of ITT such as P.O, LOI/LOA, DWA, Work done Certificates, Performance Certificates issued by the end users not below the rank of Executive/Divisional Engineer
Cl.No.3.2(d)(A) Qualifying Requirements for Power Transformer manufacturer as a Bidder: Shall upload Necessary documentary evidence for Cl.No 3(b) &(c) of Cl.No.3.2(d)(A) issued from Utilities such as P.O. copies, LOA/DWA, Performance Certificates issued by the end users (Indian Government Power Utilities) not below the rank of Executive/Divisional Engineer, should be uploaded along with the offer
Audited financial statements including Balance sheets, Profit and Loss statements, Turnover Certificate, Auditors Reports of the last five years preceding the date of bid submission of the Bidder & Consortium member (In case of Consortium)
Cl.No.3.2(d)(A)Qualifying Requirements for Power Transformer manufacturer as a Bidder: The manufacturer of Power Transformer must be registered under Indian Company Act 1956/2013 / The Indian Factories Act 1948/Any relevant Indian Laws, whichever is applicable
Cl.No.3.2(d)(A)Qualifying Requirements for Power Transformer manufacturer as a Bidder: The manufacturer of Power Transformer shall furnish Type Test reports of not older than five years as on the date of bid submission as per Cl.No 3(d) & (e) of Cl.No.3.2(d)(A)
Cl.No.3.2(d)(A)Qualifying Requirements for Power Transformer manufacturer as a Bidder: The manufacturer of Power Transformer shall furnish Dynamic Short circuit test reports for Power Transformers as per Cl.No 3(f) of Cl.No.3.2(d)(A)
Cl.No.3.2(d)(A)Qualifying Requirements for Power Transformer manufacturer as a Bidder: In case, the manufacturer has not conducted dynamic short circuit test earlier or if there is change in design, then, in the event of Award, the Bidder shall furnish Dynamic Short Circuit Test Report for the Transformer, the design of which is similar to the offered transformer as per IS/IEC standards conducted at designated laboratories as mentioned in KPTCL Technical Specifications without affecting the Delivery Schedule and at no extra cost to KPTCL. In this regard, the Bidder shall upload an undertaking agreeing to the same (Refer Undertaking-1 of the tender documents) as per Cl.No 3(f) of Cl.No.3.2(d)(A).
Documentary proof for Clause No: 3.6 of ITT: Assessed available tender capacity such as, Statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent or verified and certified by Chartered Accountant/Cost Auditor as sought in Note of the said clause in the prescribed format as in clause No: 1.5 of Qualification Information by the lead Bidder and Consortium member(In case of Consortium).
The Tenderer shall upload Bankers Certificate of lead Bidder & Consortium Partner (if applicable) duly signed by authorized person in the prescribed format as at Annexure XVIII of Section-4 and as per the clause no.3.3 (b) of ITT (Liquid Assets and /or availability of credit facilities)
Self-declaration as sought in Clause No. 3.6 Note (ii) of ITT by the Lead Bidder & Consortium partner(in case of Consortium) stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct.
Certificate from Chartered Accountants for split details of financial Turnover and GST in the prescribed format (Annexure-XX) of Lead Bidder & Consortium partner (In case of Consortium).
Self-declarations of Lead Bidder & Consortium partner (In case of Consortium) in respect of Litigation, dis-qualification due to non-performance, Risk & cost clause and Restriction on border sharing as specified in Annexure- XVI& Annexure-XVII as per Clause No.2.4of ITT
Consortium Agreement(in case of Consortium)
Power of Attorney in favour of all the persons signing the documents, Power of Attorney for Consortium(in case of Consortium), combined power of attorney signed by the signatories of all the members of consortium as an evidence of authorization for nominating leader (Prime Bidder) of consortium.( in case of Consortium)
Valid Super Grade Electrical Contractors License of both Lead Bidder & Consortium partner (in case of Consortium) issued by the Govt. of Karnataka
Certificate of Incorporation of the Individual/Consortium or any relevant document in respect of Partnership/Proprietorship firms as per the tender document
The bidder and Consortium Partner(in case of Consortium) should have valid GST registration with GSTIN number PAN Card and ISO Certificates. Note The successful Bidder and his consortium partner who have GST registration in other States should have GST registration in the State of Karnataka mandatorily at the time of execution of the Contract Agreement.
No Deviation Certificate
Letter of Undertaking as in Annexure
undertaking to source the supply of equipment/material from KPTCL approved Vendors only as per the QR for Vendor registration, available in the KPTCL website i.e., https://kptcl.karnataka.gov.in, Link Tender and Procurement - application for Vendor registration etc.
Description of the Tools & Plant available with them for execution of the Work
undertaking to source the supply of equipment/material from KPTCL approved Vendors only as per the QR for Vendor registration, available in the KPTCL website i.e., https://kptcl.karnataka.gov.in, Link Tender and Procurement - application for Vendor registration etc.
undertaking to source the supply of equipment/material from Vendors who meet the eligibility clauses regarding restriction on procurement from a country which shares land border with India as specified in Annexure- XVII.
Details of Works on hand and Ongoing contractual commitments
Upload all relevant documents as per Section-3 Qualifying information, NIT, Terms & conditions as stipulated in the Tender Document.
Copies of original documents defining the Constitution or Legal Status, place of Registration and Principal place of Business of the Bidder (Lead Bidder & Consortium Partner) , written Power of Attorney to the Signatory of the Bid to commit the Bidder (Lead Bidder & Consortium Partner) to the Contract along with the resolution passed in this regard by the Board of Directors all the Partners of the Firm.
The Tenderer shall upload declarations for Deviations, if any as per Schedule-5 and Schedule-6 of the Techno Commercial sheets
Please note that the Filled in Techno commercial sheet shall be uploaded along with all other QR documents. Offers shall be quoted in the item-wise bid Financial offer, provisioned in the e-procurement portal. In case the Prices are uploaded in/along the Techno commercial Bid, then Bid will be summarily rejected. The Techno-commercial sheets shall be uploaded in KPTCL excel formats only.
Any other documents as specified in the tender,
₹7,500
₹26.3 L
10 Jul 2025
10 Jul 2025
18 Jul 2025
10 Jul 2025
10 Jul 2025
Power Transformers:
66/11KV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, first filling of ...
e) Nitrogen Injection fire extinguishing system (NIFPS) including Civil Engineering works like soak pit etc., as per the recommendations of the supplier of the fire fighting system.
Circuit Breaker :
SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...
Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators:
A) 66KV, 1250A, 40KA Class Dou...
b) Upright mounting type without earth switch. (Live point height 4600mm)
c) Upright mounting type without earth switch. (Live point height 6350mm)
11 kV isolator:
a) single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR outgoing feeders.
b) Double break 400 A, 25 KA capacity with rigid bimetallic terminal connector suitable for coyote ACSR for capacitor bank
Current Transformer : Current Transformer including Marshalling box, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable forDrake ACSR conductor.
For Details refer...
ii) 66KV Class, 40KA, CT of ratio 200-100/1-1-1A for Tr. Transformers.
iii) 11kV Class, 25kA, NCT of ratio 1200-800/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of 75mmx6mm Copp...
Voltage Transformer :
Voltage Transformer 66KV, Single Phase, Oil filled outdoor type including Marshalling KIOSK with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical s...
Lightning Arrestors
Surge Arresters (Porcelain Housing) Metal Oxide Gap less type, as per Technical Specification:
a) 60KV, 10KA, SM type for Over head lines
b) 60KV, 10KA, SM Type for Transformer
b) 9 kV, 10KA station class with connector and clamp
Capacitor Bank : Design, Engineering , supply, erection, testing & commissioning of 2.9 MVAR, 12.1KV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors, with suitable...
Control and Relay Panel:
Simplex type control and relay panels complete as per specifications:
a) For 66KV Transmission line.
c) For 66/11 KV Power Transformer
Fabrication, galvanising and supply of Mild Steel of Station structures , Mounting Structures & Lightning Mask (excluding Bolts & nuts)-Total Weight
For Details refer techno commercial sheets
Supply of galvanised Bolts & Nuts for Station structures , Mounting Structures & Lightning Mask -Total Weight
For Details refer techno commercial sheets
B) 11 kV ODS and take off structure :
Supplying & Erection of D.P.Structure with all accessories using 9.5Mts. RCC poles,145Kg WL suitable for mounting Roaster GOS.
Supplying & erection of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT ...
BUS BAR FORMATION :
a) Moose ACSR -66 kV side
b) Drake ACSR -66 kV side
c) Earth wire 7/3.15mm steel with clamps/lugs
B) Rigid Bus with Taps & Clamps :
i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter a) 75mm
b) 63mm size connecting isolator to vertical tap
ii) A) Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 66KV side with rounded off end.
iii) A) Post insulator clamps suitable for 63 mm Aluminium pipe & Post insulator solid core type - 66kV side
iii) A) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 66kV side
b) ExpansionType
iv) Corona Bell Suitable for Aluminium Pipe of size 75mm on 66 kV
iv) Flexible type Terminal Connector suitable for 63mm Aluminium tube to connect isolator
iv) Flexible type Terminal Connector suitable for 75mm Aluminium tube to connect isolator of bus PT.
v) End cap Suitable for Aluminium tube of size 63mm on 66kV
A) Post Insulators Cylindrical Solid core type
a. 66kV Class, 1 Unit/stack
B. Disc Insulators and hardwares
ii) Single Suspension string using 6 Units of each 11kV, 90KN Disc Insulator along with Suspension Clamp and hardware suitable for Drake ACSR. (66kV side)
C Type Wedge Connector suitable for Drake - Coyote (Line)
C Type Wedge Connector suitable for Drake -Drake (Bus )
Post insulator clamp suitable for Drake ACSR and 66kV Solid Core Insulator.
Auxiliary Transformer
Supply & erection of station Auxiliary transformer with oil and copper windings, outdoor type 100KVA, 11KV/433V, 3Ph, Vector Group Dyn11, off load tap changer (with 5 tap...
A) LTAC Panel (indoor) 415V, as per Technical specification.
For Details refer techno commercial sheets
B) A.C. Distribution Box (Outdoor) :
as per Technical specification.
For Details refer techno commercial sheets
LT Power armoured UG Cable as per specification with glands/lugs/ferrules :
a) 1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules
b)1.1Kv PVC Insulated 25 Sq.mm Copper Cable, 4 Core with glands / lugs / ferrules
c) 1.1 kV class 4X 10 Sq mm Copper Cable with glands/lugs/ferrules
STATION BATTERY & BATTERY CHARGER :
i) 110V, 200AH Battery set Plante/Grid/Nickel Cadmium Type consists of 55 Nos. of cells with accessories as per specification.
ii) Battery charger suitable for 110V, 200AH, Battery set Plante/Grid/Nickel Cadmium Type consisting of 55 No. cells with Float Cum Booster type battery charger as per specification
DC Distribution Panel (Indoor type) as per Technical specification.
For Details refer techno commercial sheets.
PVC insulated Copper Control Cable with Lugs / Ferrules. 1.1 KV class. Size of cable as per technical specifications.
19 Core 2.5 Sq.mm.
10 C x 2.5 Sqmm
4 Core 6.0 Sq.mm.
4 Core 2.5 Sq.mm.
2 Core 2.5 Sq.mm.
2 Core 6 Sq.mm.
11 KV, XLPE Insulatd UG Cable as per Technical Specification
a) 11KV XLPE cable, 1000Sq. mm. Aluminium cable from 66/11KV transformers to 11KV Switchgear.
b) 3C X 240 Sq. mm (To be run from 11kV switchgear to take off DP structure)
c) 3C X 95 Sq. mm( To be run for Auxiliary transformer from 11kV switchgear to auxiliary Transformer).
Cable Terminationkits as per techincal specification.suitable for 1000 Sq./ mm Single Core
Cable Terminationkits as per techincal specification.suitable for 240Sq. mm 3 Core
Cable Terminationkits as per techincal specification.suitable for 95Sq. mm 3 Core
Equipments required for establishing SCADA Communication as per KPTCL Specification
For Details refer techno commercial sheets
a) Remote Terminal Unit (RTU) 64 (I/O) Port
b) Data Concentrator Unit (DCU)
c) 2kVA online UPS (230V AC 1 phase 50Hz) with Battery
Cables Supplying and Laying
Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core
Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core
Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core
Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core
Supply Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.
Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications.
FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS :
Foam type extinguisher (Mechanical) 50 Ltr. capacity
Foam type extinguisher (Mechanical) 9 Ltr. capacity
Water type (gas pressure type) 9 Ltr. capacity
Carbon di-oxide type 4.5 kg. Capacity
Sand type G.I Buckets 15 Ltr. Capacity
Steel stands for above to have 4 buckets to each stand.
MAINTENANCE TOOLS AND PLANTS
Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)
Telescopic ladder Aluminium 6 Mtr. Height
Ring spanner set
Tube spanner set
Pipe wrench 24 inch
Pipe wrench 18 inch.
Hydraulic crimping tools up to 1000 Sq.mm
Rubber hand gloves (15 kV tested)
Rechargeable 5W LED Hand Torch
Insulated cutting plier 12 inch size
Insulated cutting plier 8 inch size
Line live tester AC/DC 500 V
Screw driver 18
Screw driver 12
Chain pulley block 5 ton cap
Hydolic jack 5T capacity
Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. height.
Transil oil di-electric break down (with 2.5 mm gap 0 to 60 kV) Tester.
Insulation megger 2.5 to 5 kV
Insulation megger 500 V
SF-6 Gas leak detector / Gas filling.
Multimeter electromechanical
Multimeter Electronic
a) DC Voltmeter range -5V to + 5V
b) Wall mounting type holder for Hydrometer- 1No
c)Thermometer with wall mounting holder- 1No
a) Hydrometer syringe suitable for vent holes- 1No
b)Specific gravity correction chart- 1No
c)Protective goggle
d)Acid resisting jars (4 pint capacity)
Rubber shoes knee height
Grounding sticks
MISCELLANEOUS ITEMS :
Rubber mats 1000 mm x 2000 mm x 12 mm size tested for 15kV class.
Shock treatment charts, hard board, liminated with coloured pictures & literature both in Kannada & English.
Water filter / Water purifier : Wall mounting type (Aquaguard type).
Substation name board duly painted as per specification including erection & Civil Works.
Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.
Door locks 7 levers (Navtal make) (Sizes and capacities to be got approved).
Danger board ( prohibited ) with support structure including fixing in front of the gate.
Equipments name plates and earthing name plates including fixing at outdoor yard.
Furniture for control room, staff and maintenance, staff, godrej / featherlite / chandan make :
a)Steel Almirahs 6 1/2 feet- 2 nos
b)Steel Almirahs 6 1/2 feet with glass panel doors 1No.
Officers tables
Steel Slotted angle rack (big Size)
Steel Slotted angle rack (small Size)
Executive revolving chairs
S Type Arm Chairs
Steel folding Chairs
Supply and installation/ Fixing/ Provision of Outdoortype Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (WeatherProof), rustproof, dustproof, waterproof...
Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...
Station Erection
Power Transformers:
66/11KV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, first filling of ...
Circuit Breaker :
For details refer Techno commercial sheets uploaded
I.72.5KV, 2500A, 40 KA Class
a) For 66kV Line
b) For 66/11kV Transformer
Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators:
A) 66KV, 1250A, 40KA Class Dou...
11 kV isolator:
For details refer Techno commercial sheets uploaded
a) single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR outgoi...
Current Transformer : Current Transformer including Marshalling box, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor.
For details refe...
iii) 11kV Class, 25kA, NCT of ratio 1200-800/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of 75mmx6mm Copp...
Voltage Transformer 66KV, Single Phase, Oil filled outdoor type including Marshalling KIOSK with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specification
Lightning Arrestors
Surge Arresters (Porcelain Housing) Metal Oxide Gap less type, as per Technical Specification:
a)60KV, 10KA, SM type for Over head lines
b) 60KV, 10KA, SM Type for Transformer
b) 9 kV, 10KA station class with connector and clamp
Control and Relay Panel:
For details refer Techno commercial sheets uploaded
Simplex type control and relay panels complete as per specifications:
a) For 66KV Transmission line.
b) For 66/11 KV Power...
Fabrication, galvanising and supply of Mild Steel of Station structures , Mounting Structures & Lightning Mask (including Bolts & nuts)-Total Weight
For details break up refer Techno commercial shee...
B) 11 kV ODS and take off structure :
Supplying & Erection of D.P.Structure with all accessories using 9.5Mts. RCC poles,145Kg WL suitable for mounting Roaster GOS.
Supplying & erection of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT ...
BUS BAR FORMATION :
Formation of Main/Cross Bus with Single Drake
B) Rigid Bus with Taps & Clamps :
For details refer Techno commercial sheets uploaded
i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diam...
A) Post Insulators Cylindrical Solid core type
a. 66kV Class, 1 Unit/stack
Auxiliary Transformer
Supply & erection of station Auxiliary transformer with oil, outdoor type 100KVA, 11KV/433V, 3Ph, Vector Group Dyn11, off load tap changer (with 5 taps) with step voltage...
a) LTAC Panel (indoor) 415V, as per Technical specification
b) A.C. Distribution Box (Outdoor) :
For details refer Techno commercial sheets uploaded
STATION BATTERY & BATTERY CHARGER :
i) 110V, 200AH Battery set Plante/Grid/Nickel Cadmium Type consists of 55 Nos. of cells with accessories as per specification.
ii) Battery charger suitable for 110V, 200AH, Battery set Plante/Grid/Nickel Cadmium Type consisting of 55 No. cells with Float Cum Booster type battery charger as per specification
DC Distribution Panel (Indoor type) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No. 100A SFU for IC + 12 Nos., 32A SFU for OG etc., co...
Total PVC insulated Copper Control Cable with Lugs / Ferrules. 1.1 KV class. Size of cable.
For details break up refer Techno commercial sheets uploaded
11KV Switchgear : (KPTCL Supply)
as per technical specification.
Note:The Switchgear will be supplied by KPTCL and the Bidder has to quote for complete scope of erection of Switchgear including movin...
11 KV, XLPE Insulatd UG Cable as per Technical Specification
For details break up refer Techno commercial sheets uploaded
a) 11KV XLPE cable, 1000Sq. mm. Aluminium cable from 66/11KV transformers to ...
Cable Terminationkits as per techincal specification.suitable for 1000 Sq./ mm Single Core
Cable Terminationkits as per techincal specification.suitable for 240Sq. mm 3 Core and 95Sq. mm 3 Core
Equipments required for establishing SCADA Communication as per KPTCL Specification
For details refer Techno commercial sheets uploaded
a) Remote Terminal Unit (RTU) 64 (I/O) Port
b) Data Concentrator Unit (DCU)
c) 2kVA online UPS (230V AC 1 phase 50Hz) with Battery
Integration of RTU, DCU and UPS with field equipments
Cables -Supplying and Laying
For details break up refer Techno commercial sheets uploaded
Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core
Voltage Cables-Copper Core with c/s 2.5 sq....
Earth mat formation:
Supplying, Laying of M.S.Flats 50x6 mm, of various sizes, welding and applying ACB paint to welded portion and covering without sodium bentonite clay as per the drawing/standar...
Grounding of equipment with 50x6mm G.I. Flat and
connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connecti...
Providing 25mm dia M.S.Rod 1.05 m long earthmat spikes including heating, bending top 50mm overlap flattening and making spike edge at one end driving into the earth below the ground level and weldi...
Grounding of equipment by providing cast iron pipe of
100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron weldi...
Supplying & providing 450 mm dia 450 mm height 1.5 to 2 inches thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.,
Station mandatory spares
Circuit Breaker (CB)
Closing coil with resistor (For one Complete Circuit Breaker) for 72.5KV CB
Tripping coil with resistor (For one Complete Circuit Breaker) for 72.5KV CB
Terminal Pad (For one Complete Circuit Breaker) for 72.5KV CB
Terminal Connector (For one Complete Circuit Breaker) for 72.5KV CB
SF6 Gas (40% of total gas Qty. of each Sub-Station) Sub-Station at Siddapura
Copper Contact fingers male & female (For one Complete Isolator for 72.5KV class)
Terminal Connector (For one Complete Isolator for 72.5KV Class)
Terminal Pad (For one Complete Isolator for 72.5KV Class)
Grand Total weight of Tower parts High Tensile Steel
Note: (i)Rate to be quoted on per t Basis.
For details refer Techno Commercial sheets uploaded
Grand Total weight of Tower parts Mild Steel
Note: (i) Rate to be quoted on per t Basis.
For details refer Techno Commercial sheets uploaded
Grand Total weight of Bolts and Nuts
Note: (i) Rate to be quoted on per t Basis
For details refer Techno Commercial sheets uploaded
Number Plates/Danger Boards/Circuit Plate
Phase Plate (set of 3 No.)
Earth bond 300 mm Long
Earth bond 450 mm Long
Grounding of towers including cost of 40 mm dia 2.5 mm thick, class C G.I. pipe of 3 Mtrs length as per specifications, with 50 X 6 mm GI flats 3 Mtr long, salt, charcoal including excavation charges.
Conductor & Earth wire:
a) Coyote Plain Terrian (14.201 Km)
b)Ground wire 7/3.15 mm steel Plain terrian (14.201 Km)
A) Insulator Strings with Arcing Horns for Coyote Conductor for 66kV line
A. Tension insulator strings consisting of any one of the following:
a. Insulator string consisting of 1X5nos. of 90kN Disc i...
B) INSULATOR STRINGS with Arcing Horns for Coyote Conductor for 66kV lines:
B.Suspension insulator strings consisting of any one of the following:
a. Insulator string consisting of 1X4nos. of 90kN Di...
INSULATOR HARDWARE for ACSR Coyote Conductor
a) Single Tension Clamp with hardware and arcing horn suitable for 1x5nos. of 90kN insulator to suit Coyote ACSR
b) Double Tension clamp with hard ware and arcing horn suitable for 2x5nos. of 90kN insulator to suit Coyote ACSR
c)Single suspension Clamp with hardware and arcing horn suitable for 1x4nos. of 90kN insulator to suit Coyote ACSR
d)Double suspension Clamp with hardware and arcing horn suitable for 2x4nos. of 90kN insulator to suit Coyote ACSR
Hardwares for Coyote Conductor:
a) M S C Joints suitable for Coyote ACSR
b) Repair sleeves suitable for coyote ACSR
c) P G Clamps suitable for COYOTE ACSR
d) Vibration dampers for coyote
e)Pre formed armour rods suitable for Coyote ACSR
Hardware for Earthwire:
a) M S C Joints suitable for Ground conductor
d) Repair sleeves suitable for Ground conductor
c) P G Clamps suitable for ground conductor(65x3)
e) Single tension clamps (Bolted type) suitable for ground conductor
d) Single Suspension clamps (bolted type) suitable for Ground conductor
Check survey using their own equipment for 66 kV Plain terrain.
Check survey to be conducted during construction stage: Conducting detailed check survey along the approved route duly following ...
Conductor & Earth wire:
Coyote Plain Terrian (14.201 Km)
Ground wire 7/3.15mm steel Plain terrian (14.201 Km)
Erection of Transmission Line Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials) as per specifications.
i)The Bidders are required to quote the rates ...
Tower Accessories:
Supplying and fixing Gl angle 45 x 45 x 5 mm (1Mtr length) with cleats, bolts nuts as per specification and fixing above 0.5mts length each at inner and outer surface of tower to fa...
Supplying and fixing Barbed wire
Grounding of towers including cost of 40 mm dia 2.5 mm thick, class 'C' G.I. pipe of 3 Mtrs length as per specifications, with 50 X 6 mm GI flats 3 Mtr long, salt, charcoal including excavation charge...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in super structure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) in...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...
Providing and fixing 10 mm thick acid and or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), ...
30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type)
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...
Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.
Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per ...
SUBMERSIBLE CABLE
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...
PRESSURE GAUGE :
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
NON - RETURN VALVE :
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
Control Panel BOARD-A:
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analo...
POWER CAPACITOR:
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...
GALVANISED MILD STEEL TUBES: Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end ...
Erection elctrification & Commissioning works of pumpsets:
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply a...
Erection of panel board & meter board Unit :
Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...
Main connections:
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal pro...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm)
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm)
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 Amps 4 pole
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board.
Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT
Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulat...
Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947 - 125Amps
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying of recess mounting non integrated type LED down light 36W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80....
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...
Supplying and Fixing of --- mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wal...
Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...
Fixing all types and all capacities of fluorescent /false ceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required N...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Siddapura Amendment-WI-2381.pdf
Tender Document • 4.39 MB
Siddapura Pre-Bid Proceeding-WI-2381.pdf
Tender Document • 0.11 MB
Section 7 Technical Specifications.zip
Tender Document • 19.56 MB
Revised Section 11a Techno-Com Sheet WIN2381.xlsx
Techno-Commercial Worksheet • 1.06 MB
Annexures Siddapura.zip
Tender Document • 3.33 MB
Siddapura Pre-bid Clarification-WI-2381.pdf
Tender Document • 1.03 MB
Dwraings and sketch- siddapura.zip
Tender Document • 4.37 MB
Revised Tender Document of 66kV Siddapura- WI-2381.docx
Tender Document • 0.57 MB
NIT-Siddapura-WI-2381.pdf
Tender Document • 1.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .