Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹9.8 LAccepted-AOC | 1 | Accepted-AOC Lowest tender | |
| 2 | 2₹10.3 L+₹38,806.50 (3.91%)Rejected-AOC 1 OPP NAGAR NIGAM KATNI MAIN ROAD KATNI MADHYA PRADESH 483501 | KATNI | MADHYA PRADESH | 483501 | 2 | Rejected-AOC 2nd | |
| 3 | 3₹10.3 L+₹39,876.50 (4.01%)Rejected-AOC | 3 | Rejected-AOC 3rd | |
| 4 | 4₹11.0 L+₹1.1 L (11.0%)Rejected-AOC | 4 | Rejected-AOC 4th | |
| 5 | 5₹11.5 L+₹1.6 L (16.1%)Rejected-AOC 110059 NEW DELHI NATIONAL CAPITAL TERRITORY OF DELHI 110059 | WEST DELHI | DELHI | 110059 | 5 | Rejected-AOC 5th |
Tender Value
₹9.5 L
EMD Value
₹19,000
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
ADDITION/ALTERATION TO EXISTING ENTRANCE MAIN STEEL GATE AT DGQA COMPLEX BADARPUR UNDER GE (AF) TUGHLAKABAD
2022_MES_571707_1
GE/TKD-72/2022-23
Open Tender
Civil Works - Others
Item Rate
180 days
GE AF TUGHLAKABAD
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
9 documents required · 9 mandatory
₹500
GE AF TUGHLAKABAD
₹19,000
Yes
7 Mar 2023
14 Jan 2023
13 Feb 2023
21 Jan 2023
11 Feb 2023
28 Jan 2023
Amount
Taking down cement plaster of any description on brick or stone including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engr-in-charge.
Demolition of brick work/stone masonry of any description etc. complete all as specified and directed by Engr-in-charge.
Demolition of Concrete of any description and in any position including reinforcements complete all as specified and directed by Engr-in-charge.
Excavation in trenches n exc 15 m wide and n exc 15m depth for foundation etc and getting out in hard dense soil complete all as specified and directed by Engr-in-charge.
M&L for plain cement concrete (1:4.8) type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engr-in-charge.
M&L for RCC (nominal mix) (1:2:4) type B1 using 20mm graded stone aggregate in foundation, including rafts, footings foundation beams, plinth beams, bases for columns, etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-charge.
M&L for RCC (nominal mix) (1:2:4) type B1 using 20mm graded stone aggregate in Columns pillars piers posts and struts complete all as specified and directed by Engr-in-charge.
M&L for RCC (nominal mix) (1:2:4) type B1 using 20mm graded stone aggregate in Beams cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-charge.
M&L for RCC (nominal mix) (1:2:4) type B1 using 20mm graded stone aggregate in Arch Beams/ triangle shape, complete all as specified and directed by Engr-in-charge.
M&L for Brickwork with subclass B bricks straight or curved on plan exc 6m mean radius built in (1:6) Cement mortar complete all as specified and directed by Engr-in-charge.
M&L for rendering 15mm thick CM (1:4) on fair faces of brick work or concrete surfaces complete all as specified and directed by Engr-in-charge.
M&L for rendering 10 mm thick in CM (1:4) columns and beams complete all as specified and directed by Engr-in-charge.
M&L for Preparation of newly plastered or unplastered surfaces and applying two coats cement base paint to surfaces complete all as specified and directed by Engr-in-charge.
Formwork rough finished surfaces of concrete to sides of concrete foundations lootings bases of columns raft and raft beams sides and soft (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed by Engr-in-charge.
Form work to sides of pillars posts, struts piers, columns and stanchions etc with square, rectangular or polygonal rough finished surfaces of concrete complete all as specified and directed by Engr-in-charge.
Form work to side and soffits of curved arches surfaces of concrete complete all as specified and directed by Engr-in-charge.
M&L for TMT bars 10mm dia and over cut to length bent to Kg shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conf to TMT bar complete all as specified and directed by Engr-in-charge.
M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mid steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed by Engr-in-charge.
Returning filling in including spreading leveling watering & well ramming in layers n exc 25cm thick complete all as specified and directed by Engr-in-charge.
Removing excavated meter exc 250m but n exc 500m and depositing where directed at a level n exc 1.5m above the starting point in rocks complete all as specified and directed by Engr-in-charge.
Dismantling fencing wire mesh of any type etc. complete all as specified and directed by Engr-in-charge.
Dismantling structural steel work including doors gates but excluding framed truss etc. complete all as specified and directed by Engr-in-charge.
Framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars, barred iron doors, ladders framed balusters walk ways railings frame and similar work con-forming to Fe 200 Gde-E-165 complete all as specified and directed by Engr-in-charge.
M&L for Preparing new steel surfaces of any description exc 10cm width or grith and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engr-in-charge.
S&F galvanized 2 strand steel barbed wire 2.20 to 2 24 mm dia barbed with 2mm barbs @ 75-85 mm spacin and straining and fixing t hype of standard rails straining bolts including se tying at crossings etc complete all as specified and directed by Engr-in-charge.
S&F galvanised steel punched type concertina coil of 600mm dia (dia of coil when un-stretched) & fixed to 315mm da Gl wire all as angle iron post struts complete all as specified and directed by Engr-in-charge.
S&F 16 to 18 mm thick Dholpur Jodhpur stone cladding gang saw out with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps grade-202) of flat 30mm 2mm 150 mm long made to shape in each slab making V groove at top and bottom of stone and drilling hole for hold fastener polishing rubbing & including silicon treatment complete all as specified and directed by Engr-in-charge.
Removing building materials etc to a distance of 2 km or above beyond the defence land including loading unloading and transportation etc. complete all as specified and directed by Engr-in-charge.
M&L for stone 50mm thick in any size and in shape with aesthetic view including pillars/frames/posts (thumbly) complete all as specified and directed by Engr-in-charge. Note: Measurement shall be carried out including frame/posts /frames.
M&L for stainless steel English and Hindi letters of size approx size 12” ht using 304 grade Hollow type on the Front Base using 16 gauge and the Rib channel work of 1.5” to 2.0” Stainless steel 304 grade 16 gauge complete all as specified and directed by Engr-in-charge.
M&L for stainless steel Etching & 2” Rib logo 20” height complete all as specified and directed by Engr-in-charge.
Dismantling of concrete in ground floor complete all as specified and directed by Engr-in-charge.
M&L for Surface dressing n exc 15 CM deep hard soil complete all as specified and directed by Engr-in-charge.
M&L for 75mm thick cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in sub-floors, sub-bases, etc. complete all as specified and directed by Engr-in-charge.
M&L for 10 to 12 mm thick vitrified unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/ rectangular) of size not less than 300mm x 300mm as in parking hard standing etc including set jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles over and including 20 mm thick screed bed in CM (1:4) and removing rubbish off the premises from Defence land complete all as specified and directed by Engr-in-charge.
M&L for cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate in edges of tiles complete all as specified and directed by Engr-in-charge.
M&L for precast cement concrete blocks masonry with solid blocks exc 10 cm in width in PCC (1:2:4) type B1 using 20 mm graded stone aggregate & set in CM (1:4) in walling as in kerb block, one edge chamferred and finished complete all as specified and directed by Engr-in-charge.
Neeraj Enterprises
FUTURE ENGINEERING
akenterprises
V r traders
ANAND ENTERPRISES
Balaji Constructions
Deepak Electricals
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .