864/WS-29/2021-22

Amount

Disconnecting the electrical connections of motor, water supply to the pump and taking out pump after disconnecting both motor and pump mechanically of 125HP/ 100HP capacity installed at pump houses at BB Cantt and transporting the same to an authorized workshop for following repairs:- Dismantling the complete pump carefully, taking out all impellers, impeller housings, bush bearings, shaft with keys, shaft sleeves with nuts, coupling set, gland and gland packing, eye of impeller, water thrower, suction and delivery covers etc. complete all as directed by Engineer-in-Charge and recommended by the manufacturer. After repairs the pump set to be brought back at pump house and installed in same position, coupled with motor completely. All electrical, water and mechanical connections to be re-done all as directed. Note:- All spare parts shall be measured and paid separately under respective items.

Bush bearing made out of bronze.

Shaft sleeve with nuts made out of stainless steel 410 grade.

Re-metalling of shaft by using brass material.

Set of pins and gaskets made out of mild steel.

Coupling set made out of cast iron including bolts, nuts, washers & rubber bushes.

S&F gland box made out of cast iron including gland box studs with nuts and washers for Srl Item No1.

Eye of impeller.

Metal (bronze) filling in the worn out portion of impellers, turning and grinding the metal filled portions, balancing the impeller by means of precision lathe machine.

Disconnecting the electrical connections of motor, water supply to the pump and taking out pump after disconnecting both motor and pump mechanically 40HP/ 30HP capacity installed at pump houses at BB Cantt and transporting the same to an authorized workshop for following repairs:- Dismantling the complete pump carefully, taking out all impellers, impeller housings, bush bearings, oil rings, shaft with keys, shaft sleeves with nuts, balancing valve, com seating bush, neck rings and bushes, coupling set, gland and gland packing, logging ring, oil filter plug, water thrower, suction and delivery covers etc. all as directed by Engineer-in-Charge and recommended by the manufacturer. After repairs the pump set to be brought back at pump house and installed in smae position, coupled with motor completely. All electrical, water and mechanical connections to be re-done all as directed. Note:- All spare parts shall be measured and paid separately under respective items.

Bush bearing made out of bronze.

Shaft sleeve with nuts made out of stainless steel 410 grade.

Re-metalling of shaft by using brass material.

Set of pins and gaskets made out of mild steel

Coupling set made out of cast iron including bolts, nuts, washers & rubber bushes.

Gland box made out of cast iron including gland box studs with nuts and washers.

Eye of impeller.

Metal (bronze) filling in the worn out portion of impellers, turning and grinding the metal filled portions, balancing the impeller by means of precision lathe machine.

Disconnecting the electrical connections of motor, water supply to the pump and taking out pump after disconnecting both motor and pump mechanically 20HP/ 12.5HP capacity installed at pump houses at BB Cantt and transporting the same to an authorized workshop for following repairs:- Dismantling the complete pump carefully, taking out all impellers, impeller housings, bush bearings, oil rings, shaft with keys, shaft sleeves with nuts, balancing valve, com seating bush, neck rings and bushes, coupling set, gland and gland packing, logging ring, oil filter plug, water thrower, suction and delivery covers etc. all as directed by Engineer-in-Charge and recommended by the manufacturer. After repairs the pump set to be brought back at pump house and installed in same position, coupled with motor completely. All electrical, water and mechanical connections to be re-done all as directed. Note:- All spare parts shall be measured and paid separately under respective items.

Bush bearing made out of bronze.

Shaft sleeve with nuts made out of stainless steel 410 grade.

Re-metalling of shaft by using brass material.

Set of pins and gaskets made out of mild steel.

Coupling set made out of cast Iron including bolts, nuts, washers & rubber bushes.

Gland box made out of cast iron including gland box studs with nuts and washers.

Eye of impeller.

Metal (bronze) filling in the worn out portion of impellers, turning and grinding the metal filled portions, balancing the impeller by means of precision lathe machine.

M&L for disconnecting electrical and mechanical connections of motor, and taking out motor for rewinding, of centrifugal pump set/ non clogging sewage type submersible electric motor by taking out burnt copper winding from the electric motor and rewinding the motor with insulated copper wire as per exisitng gauge & turns including heat/ fire proof sleeve, varnishing, heating complete and refixing the motor within existing position including testing and commissioning complete all as specified and directed for 120 HP capacity.

All as per srl item No. 4.00 above but of 100 HP capacity.

All as per srl item No. 4.00 above but of 60 HP capacity.

All as per srl item No. 4.00 above but of 40 HP capacity.

All as per srl item No. 4.00 above but of 30 HP capacity.

All as per srl item No. 4.00 above but of 20 HP capacity.

All as per srl item No. 4.00 above but of 12.5 HP capacity.

All as per srl item No. 4.00 above but of 7.5 HP capacity.

All as per srl item No. 4.00 above but of 5 HP capacity.

M&L for taking out submersible pump set 60/ 35HP capacity with 100mm/ 80mm dia MS column pipes from the bore well of depth upto 100 metres for carrying out repairs and lowering the same in position with new rubber washers, nut and bolts suitable for MS column pipe 100mm/ 80mm dia after carrying out the repairs including testing and commissioning, complete all as specified and directed.

M&L for rewinding of submersible electric motor of capacity 60 HP by taking out burnt copper winding from the electric motor and rewinding the motor with insulated copper wire as per exisitng gauge & turns including heat/ fire proof sleeve, varnishing, heating complete and refixing the motor within existing position including testing and commissioning, complete all as specified and directed for the following capacities. Notes :- (i) The required transportation, crane and tools shall be arranged by the contractor and cost shall be deemed to be included in the quoted rates. (ii) If any damage occured during repair/ testing of pumpset, the responsibility lies with the contractor for rectification without any extra cost to hout.

All as per srl item No. 14.00 above but 35 HP capacity.

S&F following spare parts suitable for submersible pump set 35 HP including taking down unserviceable spare parts, complete all as specified and directed. Stainless steel pump shaft.

Gun metal pump drive end bush.

Gun metal impeller.

Stainless steel bush for coupling of motor and pump.

S&F following spare parts suitable for submersible pump set 60 HP including taking down unserviceable spare parts, complete all as specified and directed. Gun metal impeller.

Stainless steel bush for coupling of motor and pump.

S&F bearing No.3309 including taking down unserviceable bearing, complete all as specified and directed. Make - TATA/ SKF

All as per srl item No. 18 here-in-before but of bearing No. 6313.

All as per srl item No. 18 here-in-before but of bearing No. 6309.

All as per srl item No. 18 here-in-before but of bearing No. 6308.

All as per srl item No. 18 here-in-before but of bearing No. 6306.

All as per srl item No. 18 here-in-before but of bearing No. NU/ NDE 316.

All as per srl item No. 18 here-in-before but of bearing No. NU/ NDE 317.

S&F of iron rubber coupling set TC 17/ 16 (ISI marked) including taking down unserviceable rubber coupling, complete all as specified and directed.

All as per srl item No. here-in-before but of rubber coupling TC 15/ 14.

All as per srl item No. here-in-before but of rubber coupling TC 13.

All as per srl item No. here-in-before but of rubber coupling TC 11.

S&F gland packing of size 8mm (ISI marked) including taking down unserviceable gland packing, complete all as specified and directed.

S&F gland packing of size 10mm (ISI marked) including taking down unserviceable gland packing, complete all as specified and directed.

S&F gland packing of size 12mm (ISI marked) including taking down unserviceable gland packing, complete all as specified and directed.

S&F manually operated oil immersed star delta motor starter, 150 HP, three phase with double contact strip wound overload coil and cable entry box including taking down unserviceable starter, complete all as specified and directed

Supplying, Installation, testing and commissioning fully automatic star delta starter with M-5 contactor type, pneumatic timers, overload relay of range 84.6-135 A and having contactor rating 110A suitable for 100HP/ 135HP centrifugal pumpset including complete cabling for motors, complete all as specified and directed. Make : SKN/BCH/MDS

All as per srl item No. here-in-before but of 40/ 30 HP.

All as per srl item No. here-in-before but of 10/ 12.5/ 20 HP.

S&F DOL starter upto 5 HP including taking down unserviceable starter, complete all as specified and directed. Make :- SKN/ BCH/ MDS.

S&F single phase preventor including taking down unserviceable single phase preventor, complete all as specified and directed by Engr-in-Charge. Make:- Minilec/ Siemens/ SKN

Supplying and filling starter oil for oil immersed starter including draining out the old unserviceable oil, complete all as specified and directed. Make - SKN/ Castrol/ Poweroil.

Supplying and filling bearing grease suitable for pumpset, complete all as specified and directed. Make : Castrol/ HP/ Servo.

S&F pressure booster pump 0.5 HP, head range 3.5-6 metres, discharge range 900-4200LPH, 230V including taking down unserviceable pressure booster pump, complete all as specified and directed. Make : Crompton greaves/ Kirloskar/ KSB.

Supplying and laying PVC insulated, water proof cable, PVC sheathed, multistranded copper conductor 1100V, 3 core, 25 sqmm flat cable including taking up/down unserviceable cable, complete all as specified and directed. Make : Havells/ Finolex/ Polycab.

S&F single core FRLS PVC insulated round sheathed copper conductor cabel of size 70 sqmm drawn through suitable flexible PVC pipe including all fixing accessories and taking up/down unserviceable cable, complete all as specified and directed. Make :- Havells/ Finolex/ Polycab.

S&F servo control PCB suitable for 500/ 250/ 100/ 50 KVA servo voltage stabilizer, 3 phase including taking down unserviceable servo control PCB, complete all as specified and directed. Make : Vinitec/ Albal / Powerware

S&F control transformer suitable for 500/ 250/ 100/ 50 KVA servo voltage stabilizer, 3 phase including taking down unserviceable control transformer, complete all as specified and directed. Make : Vinitec/ Albal / Powerware

S&F digital voltmeter 0-500 V including taking down unserviceable voltmeter, complete all as specified and directed. Make : Vinitec/ Albal / Powerware

S&F digital ampere meter 0-200 A including taking down unserviceable ampere meter, complete all as specified and directed. Make : Vinitec/ Albal / Powerware

Supply and filling servo stabilizer oil grade IS:335-1993 including draining out old unserviceable oil, complete all as specified and directed.

S&F copper wound coil assembly suitable for 50 KVA servo voltage stabilizer, 3 phase with input voltage 90V-250 V including taking down unserviceable coil assembly, complete all as specified and directed. Make : Vinitec/ Albal / Powerware

S&F copper made core assembly suitable for 50 KVA servo voltage stabilizer, 3 phase with input voltage 90V-250 V including taking down unserviceable core assembly, complete all as specified and directed. Make :- Vinitec/ Alba/ Powerware. Note for srl item No 37 to 43 :- (i) The required transportation and crane & tools for lifting of servo voltage stabilizer shall be arranged by the contractor and cost shall be deemed to be included in the quoted rates. (ii) If any damage occured during repair/ testing of servo voltage stabilizer then the responsibility lies with the contractor for rectification without any extra cost.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channels, plinth and drains etc. complete all as specified and directed.

Supply only DPD testing kit to measure residual free chlorine available in water sample. Make :- AQUASOL/ Bharti Waters Pvt. Ltd.

Taking out old and unserviceable sign boards, including supports and supplying and fixing single shaded reflective sign board of high intensity reflective sheet computer cut background of sky blue/ green colour and white letters (letters and diagrams to be written on the board, shall be provided by JE E/M/ Engineer-in-Charge) mounted on hardened aluminium alloy sheet, 2mm thick and size 0.9 X 0.3 mtr fixed on angle iron frame and supported by angle iron/ square tubes, complete all as per manufacturers instructions/ specifications and as directed by Engineer-in-Charge. Note:- Rates deemed to be included for angle iron/square tube frames, supports, nuts and washers etc complete all as directed by Engineeer-in-Charge.

S&F in replacement of LT offload change over switch- AC 21(side handle) of 400amps ,CPRI approved single door enclosed, weather and vermin proof, suitably ventilated, 415 volts, 50 cycles, AC supply, factory made, fully compartmentalised made out of 3.00 mm thick CRCA sheet steel for load bearing and 2.00 mm thick for non load bearing protection of enclosures and powder coated of approved colour including suitable size angle iron/ flat iron frame work/ support etc. installation, testing and commissioning, complete all as specified and directed.

S&F in repair/ replacement MCCB, 4 pole, 415 V, adjustable type, 200 Amps with breaking capacity 36 KA, complete all as specified and directed.

S&F in repair/ replacement MCCB, 3 pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 16 KA, complete all as specified and directed.

M/S FAISAL TRADING CO.

M/S VALLEY ENTERPRISES