REPAIR REPLACEMENT OF DOORS WINDOWS VENTILATORS AND

Amount

Taking down chowkats or frames not exceeding 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

Ditto all as per item No.1 above but exceeding 1.5 sqm and not exceeding 4 sqm each.

Taking down shutters of any description not exceeding 1 sqm each complete all as specified and directed.

Ditto all as per item No. 3 above but exceeding 1 sqm and not exceeding 2 sqm each.

M & L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M & L for 35 mm thick factory made Second class hardwood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc without sash bar any number fitted with cut and mitered beads for securing glass/ gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats complete all as specified and directed.

Ditto all as per item No. 6 here-in-before but 30 mm thick for window, ventilators etc ,with edges of sash bars are provided with stiles and rails without sash bars as specified in SSR part-I, section 8 clause 24(b) rebeted with sash bar etc complete all as specified and directed.

Ditto all as per item No. 7 here-in-before but 30 mm thick for window, ventilators etc are provided with stiles and rails as specified in SSR part-I, section 8 clause 24(b) without sash bars.

S&F for 32 mm thick flush shutters, solid core construction, with water proofing block board core and ply wood face panels, commercial type on both sides complete, all as specified and directed.

Ditto all as per item No. 9 here-in-before but for 20 mm thick. As in cup board etc .

S&F solid PVC frame (Single Rebated) of size of 50 mm x 47 mm mad out of 5 mm wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet fixed in opening complete all as specified and directed.

S&F factory made solid PVC door shutters 30 mm thick (style) single side prelaminated PVC sheet used instead of plain colour PVC sheet and stile & rails having one side feathered edge and other side 10 mm 90 degree bent edge complete all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F PVC hinges of 100 mm long complete all as specified and directed.

S & F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

Ditto all as per Item No 15 here-in-before but for 200 mm long.

S & F 125 mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified and directed.

Ditto all as per item No.17 here-in-before but 150 mm long.

S&F butt hinges medium weight cold rolled mild steel 100 mm long, complete all as specified and directed.

S&F for butt hinge medium weight cold rolled mild steel 75 mm long, complete all as specified and directed.

S&F for 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolts fixed complete all as specified .

Ditto all as per item No 21 above here-in-before but for 150 mm long .

S&F for 150 mm long mild steel pressed handle , ovel type , stove enamelled black complete all as specified and directed.

Ditto all as per item No 23 above here-in-before but for125 mm long .

S&F continuous (Piono) hinges, mild steel, bright finish or electrogalvanised ,30 mm width of flaps (when open) complete all as specified and directed.

S & F 300 mm long mild steel sliding door bolts plate type , stove enamelled black, with bright bolt not less than 12 mm dia including minimum of 6 bolts and nuts, (four on bolt plate and two on staple plate) complete all as specified and directed.

S & F in repairs for 300 mm long mild steel sliding door bolts plate type , stove enamelled black, with bright bolt not less than 12 mm dia including a minimum of 6 bolts and nuts, (four on bolt plate and two on staple plate) complete all as specified and directed.

S&F in repair 140 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.

S&F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F 300 mm long ordinary rat tail rod pattern mild steel door springs including roller and roller plate complete all as specified and directed.

S&F 40 mm dia , cup board knobs fixed with nut , screw and washer and brass polished complete all as specified and directed.

S&F100 mm long hasp and staple, safety type, brass with mild steel hinge pin incl bolt to hi9nf plate and fixed with screws complete.

S&F 2nd class HW plain fillets, square, rectangular in section, clean sawn, secured with nails or beads, sectional area exceeding 3 & not exceeding 6 sqcm, complete all as specified and directed.

S&F 2nd class HW plain fillets, square, rectangular in section, clean sawn, secured with nails or brads, sectional area exc 13 & not exceeding 25 sqcm,complete all as specified and directed.

S&F rubber beading 75 mm wide fixing with nail/screw, complete all as specified and directed.

S&F in repairs steel window handles fixed with nuts & bolts, screwed or welded complete all as specified and directed.

S&F in repairs steel window peg stay with nuts & bolts, screwed or welded complete all as specified and directed.

S&F in repairs hat pegs, solid body aluminium coat hooks, 450 mm long with min 5 hooks complete all as specified and directed.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, with glazing bars, devetailed or welded complete all as specified and directed.

Ditto all as per item No 39 above but without glazing bars for wire mesh complete.

S&F steel ventilators with top hung shutters including hinges, steel peg stay, with glazing bars, dovetailed or welded complete all as specified and directed.

S&F in repairs mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples, complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames etc glazed with putty or fixed with beads, complete all as specified and as directed.

S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Easing of door shutters or choukhats exceeding 1.0 Sqm but not exceeding 2.0 sqm each for easy closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Easing of window,ventilators choukhats or shutters of any size or patterns including kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate for hold fasts finished to match with the surrounding surfaces including necessary form work complete all as specified and directed.

M&L for framed work as grills with end bars shoulders/framed guard bars and similar work conforming to Fe-410 or 310 complete all asspecified and directed

M&L for mild steel small articles such as flat iron of size 25mmx3mm thick for hold fasts etc conforming to Fe 410-0, or 310-0, complete all as specified and as directed.

Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed.

M & L for brick work with fly ash bricks, Straight or curved on plan exceeding 6 mm mean radius built in CM (1:6) complete all as specified and directed.

Ditto- all as per item No 52 above but except bricks.

Taking down cement plaster on brick or Stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:4) finished even and smooth without using extra cement and applying two coat of cement based paint after preperation of surfaces complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:6) finished even and smooth without using extra cement and applying two coat of Oil Bound Distemper over a coat of primer and 1mm thick wall care putty after prepration of surfaces complete all as specified and directed.

M&L for running welding in repair thickness of metal to be welded exceeding 6 mm but not exceeding 9 mm including cleaning and preparation of surface complete all as specified and directed.

M&L for welding in repair thickness of metal to be welded exceeding 6 mm but not exceeding 9 mm each including cleaning and preparation of surface etc complete as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

S&F for framed doors or gates of mild steel angles or other sections with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe-410W(Gde-E-250) quality 'A', complete all as specified and directed.

S&F mild steel , black sheet, 1.00 mm thick for covering to door shutters, & chowkhats (frame), chullah hood, water tank etc including rounded screws , riveted and fixed to steel member etc, with 40 mm lap joints, welded reveted complete all as specfied and directed.

Taking down of MS gate of any description and refixing in same position/location after necessary repairs such as welding of any type of section, MS sheet, cutting of brick/concrete work including providing PCC (1:2:4) type B-1 using 20 mm grades stone aggregate for fixing complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings complete incl ridges etc all as directed.

S&F 1.00 mm thick plain, galvanised mild steel sheeting, in steel gates, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M&L for 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, fixed with L- type or J type hook bolts complete all as specified and directed.

Ditto all as per item No 65 above but except sheeting.

S&F in repairs 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer as in roof, wall etc complete all as specified and directed.

S&F for coloured galvalume profile sheet in roofing shall be with feed material manufactured from 0.50 mm (minimum) base metal thickness (BMT), minimum 550 Mpa yield strength and shall confirm to physical specifications of ASTM-792 or equivalent, colour coated galvalume sheet shall have maximum pitch of 250 mm C/C and minimum 28 mm crest depth in lenght as per site requirement. The steel sheet shall be coated with hot dip metallic, aluminium Zinc alloy (55% Aluminium, 43.5% Zink, 1.5% silicon) coating AZ 150 as 150 gm/Sqm total on both sides. The contractor shall submit manufacturer test certificates for the chemical and mechanical properties, confirming genuinity of material including base metal thickness must be submitted for approval to GE prior to the installation/fixing. The contractor should submit related documents for expected product services performances of pre paintted metal sheet as per relevant ASTM/IS. Manufactuer's recommended installation methodologhy, all types of accessories considered for roofting. Fasterns shall be coloured baked enamel supper durable, polyester with silicon coating of film thickness of minimum 25 micron (including primer) on top minimum 10 micron (including primer on interior fance. The paint shal be shade as approved by GE. The sheet shall have wide pans with minimum 2 small stiffening ribs for effective with self-drilling screws as per manufacturer instructions completed all as specified and directed . Note : Total thickness of sheet with BMT, AZ 150 coating and painting shall not be less than 0.575 mm).

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

Dismantling timber scantling 40 sq cm and over as in frame work in any section and in any position complete all as specified and directed.

M&L for rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to comman rafters and running rails and guided for sliding doors, frame work for chajjas/rain gaurd, fixed with angle cleats or other connecting plaste including cutting, welding etc Fe-410-W (Gde-E-250) quality 'A' complete all as specified and directed.

S&F in repairs of stainless steel curtain rod, 20-25 mm bore with bracket and supports of fancy type both end top cut to length as reqired complete all as specified and directed. Note : (a) Weight of 3.65 meter length of each SS pipe should not be less than 1.40 Kgs. (b) : Decorative fency type 02 Nos wood/fency/SSW finished side fenals/brackets of both ends of each curtain rod be provided and rates of same shall demand to be included in unit quoted rate.

S & F 18 mm thick (100% Lead free) both side plain laminated PVC/WPC sheet of any colour with using sunmica of choice colour on both side for kitchen cabinet shutters, shelves and shutters for cup board or similar use and required bracket etc. The panels shall be fabricated using adhesive and screws where ever required. All edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bent finish as per manufacterer’s instructions complete all as specified and directed. Note : All fittings and fixtures such as Soft closer, handles, piano hinges etc for shutter should be included in rated quoated by the contractor.

S & f kitchen cabinet shutter frame made of solid UPVC frame profile with homogenious fine cellular structure having smooth integral skin having 45 mm width and 20 mm thickness as vertical and horizontal stiles, joints are made and shall be fixed to walls using rquired sizes sheet metal screwes and solvent adhesive vertical and horizontal partition made of UPVC profile frame of size 35 mm x 17 mm. The panel shall be fitted with plank profile of size 250 mm width and 6 mm thick complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for applying two coat of black japan bituminous paint any description for treating of wood surface & back of choukhats not exceeding 10 cm in width or girth incl preparation of surface.

M&L preparation of new surfaces of steel and iron of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L for preparation new surface of wall and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old undecorated surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer and over and including 1mm thick wall care putty complete all as specified and directed.

M & L for preparation of old wooden surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L preparation of old surfaces of steel and iron of any description over 10cm width or girth not otherwise described, and applying two coats of synthetic enamel paint complete all as specified and as directed.

M & L for 50 mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection, finished even & fair without using extra cement,and laid in slope of 1 to 10 and in alternate bays, each bays not exe 2.50 mtr in length with 10 mm grove joints & joints to be filled with bituminous mastic fillars complete all as specified and directed.

M&L for 40 mm thick PCC (1:2: 4) type B-1 using 20 mm graded stone aggregate as in floor finished even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15 cm thickness (below and above GL) complete all as specified and directed.

m/s sahu enterprises

kailash brothers

M/S ASM ENTERPRISES

aarohi nirman company

SAXENA BANDHU