Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹94.0 LAccepted-AOC 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | JALANDHAR | PUNJAB | 144001 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹94.6 L+₹65,615 (0.70%)Rejected-Finance BIRWAN BRIDGE UDHAMPUR J K 182104 | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182104 | L-2 | Rejected-Finance Other than L-1 | |
| 3 | L-3₹1.1 Cr+₹12.1 L (12.9%)Rejected-Finance | L-3 | Rejected-Finance Other than L-1 |
Tender Value
₹1 Cr
EMD Value
₹1.8 L
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh A K Dubey, IDSE , SE CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
REPAIR TO ROAD AND ALLIED SERVICES IN THE AOR AGE B/R-I UNDER GE (SOUTH) UDHAMPUR
2022_MES_530481_1
CWE/U(S)-36/2022-23
Open Tender
Civil Works - Roads
Item Rate
270 days
Udhampur
AS PER TENDER
7 documents required · 7 mandatory
₹1,000
GE (South) Udhampur
₹1.8 L
Yes
5 Aug 2022
13 Jun 2022
29 Jul 2022
13 Jun 2022
27 Jul 2022
4 Jul 2022
60 days
Amount
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm, exceeding 50mm but not exceeding 100mm deep including stacking usable material for reuse old removing the rubbish to a distance not exceeding 50 metre and stacking, complete all as specified and directed by Engineer-in-Charge.
75mm thick (Compacted thickness) WBM in single layers with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) of granite, trap or basalt spreading and compaction with 8 to 12 tonne power roller and consolidated to required gradient and camber complete all as specified and directed by Engineer-in-Charge.
Description all as per srl item No 2 Above but except material, complete all as specified and as directed by the Engr-in-Charge.
Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal), complete, all as specified and as directed by the Engr-in-Charge.
Continuous brick edging, with width equal to the width of the brick, laid dry on end vertically with burnt clay bricks of sub class 'B' bricks, complete, all as specified and as directed by the Engineer-in-Charge.
Preparing un-surfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all loose dirt etc., and applying evenly a priming / tack coat on un-surfaced water bound macadam surfaces with paving bitumen primer using bitumen VG-10 paving grade ( 80 -100 penetration) @ 10 Kg per Ten Square Metre with tar boiler and including Bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix rolled and compacted to required camber and gradient, complete, all as specified and as directed by the Engineer-in-Charge.
Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all loose dirt etc., and applying evenly a priming / tack coat on existing black top surfaces with paving bitumen primer using bitumen VG-10 paving grade ( 80 -100 penetration) @ 5 Kg per Ten Square Metre with tar boiler and including Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix rolled and compacted to required camber and gradient, complete, all as specified and as directed by the Engineer-in-Charge.
Premix bituminous macadam with 4% paving using bitumen VG-30 paving grade ( 50 -70 penetration) bitumen binder, laid/rolled and compacted to required gradient and camber (consolidated thickness upto maximum 75mm), complete, all as specified and as directed by the Engineer-in-Charge. Note: Repair to pot holes any depth not exc 1 sqm each depression in patch over 50mm, shall also be carried out under this item
Note for item No. 6 to 8 : (a) Preparation of mix in hot mix plant, spreading by self propelling mechanical paver and rolling and compaction by set of rollers as specified in particular specifications shall be carried out. Hot mix plant may be installed at any distance but the contractor shall be responsible for maintaining the required temperature of mix under all conditions till it is laid and compacted. Unit rate against these items shall include for carrying out the works with deployment of these machinery for which nothing extra shall be payable and no delay in completion of work shall be acceptable on this account. (b) To achieve marshal stability of 1050 KN and all as per SSR Part-I Clause No. 20.B.4. (c) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs 60.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made.
Preparation of any type of road surfaces by scratching old spots, paints, trading oils greasy spots etc. and applying Thermo Plastic road marking paints as side, side lines of white/yellow colour of width upto 100mm conforming to Ministry of surface Transaport (MORTH) specification for the road and bridge work : 3rd revision, over primer as per manufacturers instructions including glass beads (intermix) type I (most/BS6008A) and provision contained in IRC-35-1997, complete all as specified and directed by GE/Engr-in-Charge. Note : Contractor shall have to furnish the detail that quantity minimum used per square meter is 5.00 Kg/Sqm.
Cat eye of size 100 mm x 100mmx18.5mm made of ABS material two reflectors fitted in the body, weight of cat eye 130 gm approx, designed for dynamic loads, fixing in repairs, complete all as specified and as directed by Engr-in-Charge.
Dark eye solar studs RED Amber or white of size 100 x 100 x 21, height without stump - 21mm, height with stump 55mm, stump dia 33mm, LEDs electronically operated with 4 Nos solar cell, Battery - 1600MA / 1.2 volts Ni - Mh mono - crystalline 2.4v / 0.3 watt, aluminum reflective frame ploycarbonate weight of stud 360 gms fixed in repairs, complete all as specified and as directed by Engr - in - Charge
Metal Guide post/Delineators made of ABS plastic fitted with two Nos. 100 mm dia highly reflective reflectors made of PMMA on both sides of the post and mounted on mild steel pipe of 50 mm duly powder coated height not less than 800mm, anti rust etc including fixed in PCC block (size 30x30x30 cm) of PCC 1:2:4 Type B-I, including taking down old delineators, complete all as specified and as directed by Engr-in-Charge. Note : Cost of PCC and earth work is deemed to be included in unit cost.
Convex mirror of 800mm dia, made of polycorbonate material provided with 75mm dia mild steel medium weight pipe post of 108m high, duly powder coated fixed on ground with PCC 1:2:4 type B-1 of block size 60x60x60 cm, fixing in repair including earth work & removing excavated soil to a distance not exceeding 50m, complete all as specified as directed by Engr-in-Charge. Note : Cost of PCC and earth work is deemed to be included in unit cost.
Speed bump of size 750 x 250mm & height 75mm (yellow / black colour) made of ABS material with two highly reflective reflectors molded in PMMA material are welded with ABS plates through Ultrasonic welding process, and the speed breaker shall be installed by the process as per standard manufacturer's instructions including taking out old speed breakers, complete all as specified and as directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level), complete all as specified and as directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge.
75 mm thick, Plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in sub base for laying floor finishes including finishing the surfaces even and rough , complete all as specified and as directed by Engr-in-Charge.
Factory made machine pressed / vibro mechenically floated coloured interlocking cement paver block (glossy finish) ISI marked, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, with topping of cement with imported pigment. Shape shall be approved by Engr-in-Charge.
Sand cushioning under floors including watering and consolidation, complete all as specified and as directed by Engr-in-Charge.
Chequered cement concrete rich colour tiles 300cm x 300cm x 22 to 25mm, (lacquar quoted) set, jointed and pointed in neat cement slurry in floors/ path with using pigments, over and including 20mm thick screed bedding layer in cement mortar in 1:6, complete all as specified and directed by GE/Engr-in-Charge.
Reinforced concrete pipes 300 mm bore, class NP2, laid and jointed complete with collars, complete all as specified and directed by GE/Engr-in-Charge.
Concrete bed to drain pipes of 300mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregates, complete all as specified and as directed by Engr-in-Charge. NOTE: Thickness of bed will be 20 cm and width 30 cm plus external dia of pipe.
75mm thick Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed by Engineer-in-Charge.
Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in quoin blocks (for use with masonry/ kerbs), bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair aces, including chamfers, weatherings, throating etc. and setting in mortar 1:4, complete with joints to match, complete all as specified and as directed.
NATIONAL ROAD BUILDERS
Sarbat Construction Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .