Providing and Fixing of Missing MS Railing and Repairing of existing Damged Railing on various Roads under the jurisdiction of C12 SUb Division U T Chandigarh

Providing and fixing for missing parts of railing in various size of M.S. angle iron, flat, channels, pipes etc. includes cutting, straitening, hiring charges of generator & welding set at site including removal of malba to dumping site and finished with two coats paint over one coat of metal primer (special quality) complete in all respects and to the entire satisfaction of the Engineer-in-charge

Providing and Fixing of M.S. Flat Railing 9'-10 ½" long and 6'-9" high ( 4'-9" above ground level and 2'-0" in ground) consisting of 2 No. vertical member made out of M.S. channel 125 x 65 x 5 mm with 0'-9" long anchorage piece welded at bottom embedded in cement concrete block 1:2:4 of size 1'-6"x1'-6"x 2'-0" in ground the rate further include diggigng of pit and removal of earth. The frame of railing consist of 2 Nos. top & bottom horizontal member as MS angle 65mmx65mmx6mm. The railing panel having vertical members of MS flat 50 mm x 6mm of 4'-4" height @ 6 ¼" & 3" spacing alternately and 7 ½" high vertical flats and @ 6 ¼" long horizontal members at top and bottom in between vertical members and welded alternatively at top. The M.S. Flat 50x6 mm are welded to each other with 12mm Dia long bar by making hole at the center of the each vertical member and 2 nos MS Flat 50 x 6 mm 9'-10 ½" long welded with vertical members on both side. The rate further including the cost of 2 Nos. 12mm dia nut, bolt and washers with 3" long sleeve of G.I. pipe 19mm dia for fixing of vertical members of railing panel to each other above the ground level, finished with two coats paint over one coat of metal primer (special quality) complete in all respects. and to the entire satisfaction of the Engineer-in-charge