Annual Stage contract under the territorial Jurisdiction of RnB Division Budgam for the year 2026 27

igot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. Complete :- Non-pressure NP-3 class (Medium duty) R.C.C. pipes - 1000 mm dia. R.C.C. pipe2
Providing and laying non-pressure of specified class R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. Complete :- Non-pressure NP-3 class (Medium duty) R.C.C. pipes - 1200 mm dia. R.C.C. pipe2
Providing and laying non-pressure of specified class R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. Complete :- Non-pressure NP-3 class (Medium duty) R.C.C. pipes - 1800 mm dia. R.C.C. pipe1
Providing and laying non-pressure of specified class R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. Complete :- Non-pressure NP-3 class ( Heavy duty) R.C.C. pipes - 450 mm dia. R.C.C. pipe1
Providing and laying non-pressure of specified class R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. Complete :- Non-pressure NP-3 class ( Heavy duty) R.C.C. pipes - 600 mm dia. R.C.C. pipe1
Providing and laying non-pressure of specified class R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. Complete :- Non-pressure NP-3 class ( Heavy duty) R.C.C. pipes - 900 mm dia. R.C.C. pipe2
Providing and laying non-pressure of specified class R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. Complete :- Non-pressure NP-3 class ( Heavy duty) R.C.C. pipes - 1000 mm dia. R.C.C. pipe2
Providing and laying non-pressure of specified class R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. Complete :- Non-pressure NP-3 class ( Heavy duty) R.C.C. pipes - 1200 mm dia. R.C.C. pipe2
Providing and laying non-pressure of specified class R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. Complete :- Non-pressure NP-4 class ( Heavy duty) R.C.C. pipes - 1800 mm dia. R.C.C. pipeProviding and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion :- Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) :- For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) :- Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)UProviding and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.):- Powder coated aluminum (minimum thickness of powder coated 50 microns) Ü
Providing and fixing 12mm thick prelaminated particle board flatpressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge.:- Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.´
Providing and fixing 12mm thick prelaminated particle board flatpressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge. Pre laminated particle board with decorative lamination on both sides.kProviding and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer in- plate etc. complete as per the direction of Engineer-in-charge.:-With Stainless Steel cover plate minimum 1.25 mm thickness. bProviding and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer in- plate etc. complete as per the direction of Engineer-in-charge.:- With brass cover plate minimum 1.25 mm thickness ÛProviding and fixing powder coated aluminium work (minimum thickness ofpowder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall withstainless steel rawl plugs @ 450 mm centre to centre and fixing theframe work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paidfor separately).(
Providing and fixing 6mm dia. G.I level adjusting hangers (upto 1200 mm length) fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3mm size 60mm long and stainless steel expandable dash fasteners 12.5 mm dia. 50mm long complete as per direction of Engineer-in-charge"
Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.:- Upto 5mm depth and 5mm width.sExtra for applying additional anodic coating AC 25 instead of AC 15 to aluminum extruded sections. Forfixedportions¡
Providing and fixing double glazed hermetically sealed glazing in aluminum windows, ventilators and partition etc. with 6mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforated aluminum spacers, desiccants, silicon sealant (both primary and secondary sealant )etc.as per specifications ,drawings and directions of Engineer-in-chargecomplete.çProviding and fixing aluminum tubular handle bar 32mm outer dia, 3.0mm thick & 2100 mm long with SS screw etc. complete as per direction of Engineer-in-charge:- Powder coated minimum thickness 50 micron aluminum tabular handle bar.ñProviding and fixing aluminum tubular handle bar 32mm outer dia, 3.0mm thick & 2100 mm long with SS screw etc. complete as per direction of Engineer-in-charge.:-Polyester powder coated minimum thickness 50 micron aluminum tubular handle bar.gProviding and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.):- Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns) n
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.):-With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) k
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.):- With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)i
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.):- With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm) "Providing and fixing machine moulded aluminum covering of approved pattern & design, made out of machine-cut aluminum sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ ceilings floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fastner of 8 mm dia. and 75 mm long bolt including providing aluminum washers 2mm thick, 15mm dia. at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete. as per drawing and direction of Engineer in-charge :- Anodized aluminum sheet 2.5 mm thick (Anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) ÝProviding and fixing machine moulded aluminum covering of approved pattern & design, made out of machine-cut aluminum sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ ceilings floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fastner of 8 mm dia. and 75 mm long bolt including providing aluminum washers 2mm thick, 15mm dia. at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete. as per drawing and direction of Engineer in-charge Powder coated aluminum sheet 2.5 mm thick (minimum thickness of powder coating 50 micron).Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminum extruded sections. Shutters of doors, windows and ventilatorsèProviding &fixing stainless steel (SS-304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete. 205 x 19 mmçProviding &fixing stainless steel (SS-304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete. 225 x 19mmçProviding &fixing stainless steel (SS-304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete. 355 x 19 mmèProviding &fixing stainless steel (SS-304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete. 510 x 19 mmçProviding &fixing stainless steel (SS-304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete. 710 x 19 mmÏProviding and fixing aluminum tubular handle bar 32mm outer dia, 3.0mm thick & 2100 mm long with SS screw etc. complete as per direction of Engineer-in-charge. Anodized (AC 15) aluminum tubular handle bar.  kgÊProviding and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc.complete.®
Providingand fixing Anodizedaluminum (Anodizedtransparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) sub frame work for windows and ventilators withextruded built up standard tubular sections of approved make conforming to IS:733 and IS:1285 fixed with dash fastener of required dia and size(dash fastener to be paid separately).ƒProviding and fixing aluminum casement windows fastner of required length for aluminum windows with necessary screws etc. Complete Anodized (AC15) aluminum1Powder coated minimum thickness 50micron aluminum<Polyester powder coated minimum thickness 50microns aluminum‡Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-chargewProviding and fixing Anodized aluminum grill (Anodized transparent or dyed torequired shadeaccording toIS: 1868minimumanodiccoating of Grade AC 15) of approved design/pattern, with approved standardsection andfixed tothe existingwindows frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Anodized aluminum standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(only weight of grill to be measured for payment)­
Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top& bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle,lock and stopper etc.to be paid separately).«Ñ`
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/ structural non sage lastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer- in- charge complete,complying to ASTMC920, DIN18540-F&ISO11600 Upto5mmdepthand5mmwidthUpto10mmdepth and10mmwidthUpto20 mmdepthand20mmwidth .uProviding and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for underground structures as directed by Engineer-in-Charge and consisting of : i) 1st layer of 22 mm to 25 mm thick approved and specified roughstone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the levelling course (levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25mm thick cement mortar 1:3 (1cement: 3coarsesand) mixed with waterproofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.Using rough kota stone.ŸProviding and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with waterproofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm(minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with waterproofing compound and finishing the exterior of stone slab with cement mortar 1:3(1cement: 3coarse sand) 20mm thick with neat cement punning mixed with waterproofing compound in recommended proportion complete at all levels and as directed by Engineer-in-Charge.Using rough kota stone.ýProviding and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) thirdlayerof1.5mmthicknessconsistingofslurryofcement@ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entiretreatment will be taken upto30cm on parapet wall and tucked into groove in parapet all around. (d) fourth andfinal layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.÷Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations. a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface beforetreatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer- in-charge to required slope and treating similarly the adjoining wallsupto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishingthe surface with 20mm thick joint less cementmortar ofmix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operationstobe donein orderandas directed andspecified byEngineer- in- charge. 23.7.1With average thickness of 120mm and minimum thickness at khurra as 65mm5Serrated with central bulb (225mm wide, 8-11mm thick)2Dumb bell with central bulb (180mm wide,8mm thick)Kickers(320mm wide, 5mmthick)¼Providing and laying water proofing treatment in sunken portion ofWCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @0.126kg/sqm.This layer will be allowed to air cure for 4hours followed with water curing for 48 hours.The rate includes preparation of surface,treatment and sealing of all joints,corners,junctions of pipes and masonry with polymer mixed slurry.…Extra for brick work with common burnt clay bricks /cement concrete bricks in superstructure above plinth level upto floor five levelFirst class teak woodA) SecondclassKailwoodCommercial ply on both sidesoProviding and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete«Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.iProviding and fixing aluminum tee channels (heavy duty) with rollers,stop end in pelmets as curtain rods.|Deduct for providing nickel plated bright finished M.S.Piano hinges instead of Bright Finished stainless steel piano hinges.%
Providing and fixing,in position concealed G.I section for wall panelling using board of required thickness fixed on the  W profile (0.55mm thick) having aknur led web of51.55mm and two flanges of 26mm each with lipsof10.55mm placed @ 610mm C/C in perimeter channel having one flange of 20mm and another flange of 30mm with thickness of 0.55mm and web of length 27mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves@ 610mm C/C with fully threaded self-tapping dry wall screws.Board is fixed to the  W profile with 25mm countersunkribbed head screws @ 200mm C/C, all complete as per the drawing and directions of engineer- in-charge. The joints of the boardsare finished with speciallyformulated jointing compoundand48mm wide jointing tape to provide seamless finish.5Two or more coats of glue sizing with spar varnish on!an under coat of flatting varnish`Polishing on wood work with ready mixed wax polish of approved brand and manufacture on New workGrading roof for water proofing treatment with :- Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)\Grading roof for water proofing treatment with:- Cement mortar 1:3 (1cement : 3 Coarse sand)]Grading roof for water proofing treatment with:- Cement mortar 1:4 (1cement : 4 Coarse sand) dSupplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm.ÐProviding and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25or90/15conformingtoIS 702 applied hot @ 1.45 kg/sqm of area for each course, second course of roofing felt type 3 grade-I (Hessian based self finished bitumen felt) and fourth & final course of stone grit6mm & down size or pea-sized gravel spread at 6 cubic decimeters per square metre including preparation of surface but excluding grading complete with Bitumen felt (Hessian based) type 3grade I conforming to Is:1322 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges,min4-point cremonelocking sets with stainlesssteel plates,handles,buffersetc.including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings ,as per the approved shop drawings,as specified and as directed by the Engineer -in- Charge.!Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, inlinear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non-combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface # 1of the fibre glass insulation layer), of black nonwoven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm / sqm, made of randomly oriented glass fibres distributed in a binder by a wet-layprocess including fixing1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SSrivets, nuts, bolts, washers etc complete.ßProviding and supplying Spandrel Glass Panels comprising of 6 mmthick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc.,all complete for the required performances as specified, asper the Architectural drawings, as per the approved shop drawings, as specified, and asdirected by the Engineer-in-Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position,shall be measured in sqm.(Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevant Item*).(i)Coloured

Deduct for not rolling with power roller of minimum 8tonnes for banking excavated Earth in layers not exceeding 20cm in depth.

Deduct for not watering the excavated earth for banking.

All kinds of soil

All kinds of soil

OrdinaryRock

Rate for a lead upto 1 meter from cutting edge

Rate for a lead upto 25 meter from cutting edge