Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.1 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹21.0 L+₹1.9 L (9.96%)Rejected-Finance H NO 496 SECTOR 10 GURGAON 122001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹24.7 L+₹5.6 L (29.5%)Rejected-Finance 13 218 MASJID EXTEN SADAR BAZAR | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹25.9 L+₹6.8 L (35.6%)Rejected-Finance 29 108 A STREET NO 10 VISHWAS NAGAR DELHI 110032 | DELHI | SHAHDARA | DELHI | 110032 | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹29.4 L+₹10.3 L (53.9%)Rejected-Finance | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
22 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Delhi Cantt-10
GE South Delhi Cantt-10
PETTY REPAIR AND B/R NATURE WORKS AT VRC, 274 TRANSIT CAMP AND 5 RAJPUT UNDER AGE B/R-I OF GE (SOUTH) DELHI CANTT-10
2023_MES_605242_1
GE/DS-45/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE South Delhi Cantt
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹97,000
Yes
6 Sept 2023
23 Jun 2023
24 Jul 2023
23 Jun 2023
22 Jul 2023
8 Jul 2023
Amount
Attending complaint for petty repair to leaking water in bib tap, pillar tap, stop cock, angle valve, flushing cistern, WHB, Sink, wall mixer etc. of any description any size by changing the washers(s)/jumper(s) etc, by adjusting/replacing the washer(s) and adjustment of lever required for making the flushing cistern functional, by tighting the leaking waste pipe of WHB/Sink and providing 'M' seal to stop leakage as required. Removal of air lock/blockage of water in GI water tubing and cleaning the pipe or fittings etc. including replacement of major defective item if required complete all as specified and as directed.
Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor shall Provide adequate nos. of plumber with all necessary T&P on all working days from 08:30 AM to 5:00 PM at AGE B/R-I Complaint Cell. 3. A recovery of Rs.100/- per complaint shall be recovered from the contractor for non-attending the complaint within 4 hrs and there after Rs.200/complaint. 4. The contractor will ensure that the team of Plumber with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by concern executive. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and may be asked for the verification at the time of payment of each RAR/Bill.
S&F in repairs chromium plated bib tap long body with flange fixed in 15mm bore of pipe, cast copper alloy with crutch of butterfly handle screwed in iron pipe complete all as specified and as directed.
S&F in repairs bib tap ISI marked cast copper alloy with fancy type screwed down high pressure and screwed for iron pipe of 15mm bore complete all as specified and as directed.
S&F in repairs bib tap standard 15 mm dia of PTMT any colour for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and as directed.
S&F in repairs Chromium plated Pillar tap 15 mm bore cast copper alloy with capstan heads chromium plated screwed down high pressure screwed in iron pipe complete all as specified and as directed.
S&F in repairs stop cock ISI marked cast copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and as directed.
S&F in repairs PVC connection 15 mm dia 45 cm long with 2 Nos PVC check nuts with washer complete all as specified and as directed.
S&F in repairs chromium plated Stop valve/angle valves cast copper alloy, screwed down both, high pressure, with crutch or butterfly handle, screwed both end fixed, 15mm internal bore complete all as specified and as directed.
S&F in repairs chromium plated brass overhead shower with arm 255mm with flange with swivel joints, any size, including fixing to steel pipe or union for 15mm bore pipe complete all as specified and as directed.
S&F in repairs brass jumper washer, brass head, face and spindle for bib cock/pillar cock/stop cock 15 mm bore any type complete all as specified and as directed.
S&F in repairs 15mm dia stop valve concealed type cast copper alloy, screwed down, high pressure chromium plated with long shank including making good dismantled portion complete all as specified and as directed.
S&F in repairs 32 mm to 40mm dia PVC waste pipe for WHB & sink, 60 cm long with union complete all as specified and as directed.
S&F in repairs waste fittings brass chromium plated 32 mm dia for wash hand basin complete all as specified and as directed.
S&F in repairs waste fittings brass chromium plated 40 mm dia for stainless steel sink complete all as specified and as directed.
S&F in repairs gun metal globe or gate valve 'ISI' MARKED, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 15 mm complete all as specified and as directed.
S&F in repairs gun metal globe or gate valve 'ISI' MARKED, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 20 mm complete all as specified and as directed.
S&F in repairs small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as specified and as directed. Note:- This item will not be measured against item No.43 &46 here in after.
S&F in repairs small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 20 mm bore pipe (ISI marked) complete all as specified and as directed. Note:- This item will not be measured against item No.44 &47 here in after.
S&F in repairs small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 50 mm bore pipe (ISI marked) complete all as specified and as directed. Note:- This item will not be measured against item No.44 &48 here in after.
S&F in repairs CI bracket of exiting size, for WHB or Kitchen Sink etc including cutting, necessary fitments for pinning in brackets complete all as specified and as directed.
S&F in repairs PVC syphone with handle complete for low level flushing cistern complete all as specified and as directed.
S&F in repairs PVC handle heavy duty, for low level flushing cistern complete all as specified and as directed. Make:- As per sample.
S&F in repairs 10 ltrs capacity PVC Low level flushing cistern including PVC syphon and float valve with float, PVC long bend for out let connection of cistern with WC complete fixing and connecting bend with WC complete all as specified and as directed.
S&F in repairs PVC polyplast float valve for cistern tank complete all as specified and as directed.
S&F in repairs plastic water closet seat cover (for Anglo Indian) white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodised hinging device complete all as specified and as directed.
S&F in repairs CP Health faucet for Europeon type WC with 1.5m long pipe as per approved sample complete all as specified and as directed.
S&F in repairs CP grating 127 mm dia with/without hole round, fixed on floor/nahani trap, fixed with cement mortar (1:3) complete all as specified and as directed.
S&F in repairs chromium plated Jet for WC with 1.00 Mtr long PVC pipe including necessary GI fitting as required like toe, nipple etc. complete all as specified and as directed.
S&F in repairs soap dish Chromium plated brass fancy type complete all as specified and as directed.
S&F in repairs Toilet paper holder Chromium plated brass fancy type complete all as specified and as directed.
S&F in repairs towel ring chromium plated brass fancy type complete all as specified and as directed.
S&F in repairs CP towel rail 60Cm long complete all as specified and as directed.
S&F in repairs glass Shelf Corner with frame Chromium plated brass fancy type complete all as specified and as directed.
S&F in repairs HDPE PVC lid (cover) for 1000 to 2000 Ltrs capacity PVC tank complete all as specified and as directed.
S&F in repairs HDPE PVC lid (cover) for 500 Ltrs capacity PVC tank black/White complete all as specified and as directed.
Attending complaint for petty repair to easing of Doors/Window/Cup Board shutters by tightening of hinges/ handles/Al-drop bolt / tower bolt / knobs, hasp and stapple etc of any size / any number of panels for easy closing / opening or changing the position of hinges, adjustments of tower bolts,sliding bolts, replacement of looking mirror etc complete including replacement of major defective item if required complete all as specified and as directed.
Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. Any major item required to be replaced with new one to make the system functional shall be measured and paid for seperately as "S&F or S&F in repairs" under respective applicable item of this schedule. 2. Contractor shall Provide adequate nos. of carpenter with all necessary T&P on all working days from 08:30 AM to 5:00 PM at AGE B/R-I Complaint Cell. 3. A recovery of Rs.100/- per complaint shall be recovered from the contractor for non-attending the complaint within 4 hrs and there after Rs.200/complaint. 4. The contractor will ensure that the team of carpenter with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by concern executive. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and may be asked for the verification at the time of payment of each RAR/Bill.
S&F in repairs 9mm Plywood, grade BWR, type BB each panel area, n.exc. 1.50Sqm fixed with nail/screw to timber frame work complete all as specified and as directed.
S&F in repairs magic eye for panelled/flush shutter 35mm thick complete all as specified and as directed.
S&F in repairs CP Peg set of 06 hanging complete all as specified and as directed. Make:- As per sample available with Engineer-in-charge
S&F in repairs sliding door bolts 300 mm long clip type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
S&F in repairs MS barrel tower bolt, stove enamelled black 200mm long complete all as specified and as directed.
S&F in repairs 100 mm long MS butt hinges 'medium weight' cold rolled welded to steel frame work complete all as specified and as directed.
S&F in repairs steel window handles(right & left) and peg stays etc as per sample complete all as specified and as directed.
S&F in repairs 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
S&F in repairs 125 mm mild steel pressed handle oval type, stove enamelled black complete all as specified and as directed.
S&F in repairs 125 mm aluminium anodised handle cast type complete all as specified and as directed.
Taking up or down GI steel water tubing 15mm bore and connections including cleaning complete all as specified and as directed.
Taking up or down GI steel water tubing 20mm bore and connections including cleaning complete all as specified and as directed.
Taking up or down GI steel water tubing 50mm bore and connections including cleaning complete all as specified and as directed.
Refixing the old GI steel water tubing and connection of 15mm bore in new/old position with and including all fittings, to roofs,walls or ceiling complete all as specified and as directed. Note:-Old tubes as obtained from serial item No 48 herein before will be used for.
Refixing the old GI steel water tubing and connection of 20mm bore in new/old position with and including all fittings, to roofs,walls or ceiling complete all as specified and as directed. Note:-Old tubes as obtained from serial item No 49 herein before will be used for.
Refixing the old GI steel water tubing and connection of 50 mm bore in new/old position with and including all fittings, to roofs,walls or ceiling complete all as specified and as directed. Note:- Old tubes as obtained from serial item No 50 herein before will be used for.
S&F galvanised steel water tubing 15mm bore 'medium grade' with and including all fittings and fixed to walls or laid in floors complete all as specified and as directed.
S&F galvanised steel water tubing 20mm bore 'medium grade' with and including all fittings and fixed to walls or laid in floors complete all as specified and as directed.
S&F galvanised steel water tubing 50mm bore 'medium grade' with and including all fittings and fixed to walls or laid in floors complete all as specified and as directed.
S&F in repairs stainless steel sink with drainage board of 1 mm thick sheet for kitchen with plug washer, waste pipe, cast iron cantilever brackets connecting union, fixed in position complete all as specified and as directed.
S&F in repairs stainless steel sink with out drainage board made out of, 304 grade Stainless steel, 1.00 mm thick sheet for kitchen with cantilevers connecting union complete all as specified and as directed.
S&F in repairs 1.00mm thick stainless steel plate rack overall size (31X36X10 inch) fixed with steel screws complete all as specified and as directed.
S&F in repairs for vitreous china wash hand basin flat back size 550x400 mm size white excluding taps waste chain and plug and porcelain stopper but including brackets and 32 mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32MM X 600 MM long PVC waste pipe complete flange end bedded in red lead cement and other end fixed complete all as specified and as directed.
M&L for manual Sealing of traps,WCs (manually) with neat cement paste after removal of water from it, to prevent or make up the leakage including cementing in cement mortar (1:3) from inside and outside both & refixing grating, plasters etc. complete all as specified and as directed.
S&F in repairs vitreous china squatting pan (Orissa pattern white) long pan fixed size 580x440mm white with integral footrest with 100 mm bore Cast iron `P' or `S' trap (excluding flushing cistern and flush pipe) complete all as specified and as directed.
S&F in repairs viterous china wash down water closet pan Pedestal pattern (Anglo Indian WC) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and as directed.
Taking down cast iron pipes including fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings/pipes laid in trenches,floors or fixed to walls all as directed including earth work, demolition of PCC / Brick work complete all as specified and as directed for the following sizes of pipes:-
All as per Srl item No. 64 above, but 100 mm bore of pipe.
All as per Srl item No. 64 above, but 75 mm bore of pipe.
S&F cast iron sand soil waste or vent pipes (ISI Marked), in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good to match with existing surfaces complete all as specified and as directed for the following sizes of pipes:-
All as per Srl item No. 65 above, but 100 mm bore of pipe.
All as per Srl item No. 65 above, but 75 mm bore of pipe.
S&F cast iron branch pieces (ISI Marked), single (equal or unequal) ordinary of inverted spigot or socket type complete all as specified and as directed for the following sizes of pipes:-
All as per Srl item No. 66 above, but 100 mm bore of pipe.
All as per Srl item No. 66 above, but 75 mm bore of pipe.
S&F cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and as directed for the following sizes of pipes:-
All as per Srl item No.67 above, but 100 mm bore of pipe.
All as per Srl item No.67 above, but 75 mm bore of pipe.
S&F CI bends/branch pieces (any radius) for oval access doors complete all as specified and as directed for the following :-
All as per Srl item No.68 above, but 100 mm bore of pipe.
All as per Srl item No.68 above, but 75 mm bore of pipe.
S&F in repairs CI floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75 mm including floor around to required depth and burning lead joints etc to facilitate dismantling old CI trap and making good complete all as specified and as directed
Extra over cast iron pipe and fitting if lead joint are provided in lieu of cement joints complete all as specified and as directed for the following sizes of pipes:-
All as per Srl item No.70 above, but 100 mm bore of pipe.
All as per Srl item No.70 above, but 75 mm bore of pipe.
S&F in repairs, MS clamps for CI pipes 100 mm bore made out of 50mm x 5 mm flat and 16 mm dia round bars, including bolts and nuts and securing to wall in PCC (1:2:4) and making good in cement mortar (1:3) complete all as specified and as directed
Dismantling water tanks exc 250 litre but not exceeding 500 litre and removal from site complete all as specified and as directed
S&F rotational moulded polyethelene water storage tank capacity 500 litres 'ISI Marked' cylindrical vertical with closed top hoisted and fixed in position complete all as specified and as directed.
Taking down rain water pipes (any size or pattern) including all fittings bends etc. complete all as specified and as directed
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, 110mm bore of pipe complete all as specified and as directed
S&F PVC (SWR) bends any radius for 110mm bore of pipe complete all as specified and as directed
S&F PVC (SWR) bends any radius for 75 mm bore of pipe complete all as specified and as directed
Taking down cement plaster on brick walls, concrete surfaces, raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed
M&L for 15 mm thick plaster in cement mortar (1:6) on brick walls, finished even and smooth without using extra cement complete all as specified and as directed
M&L for 10 mm thick plaster in cement mortar (1:4) not exceeding 3 sqm each patch, on ceiling, finished even and smooth without using extra cement complete all as specified and as directed
M&L for 15mm thick plaster in cement mortar (1:4) on brick walls, finished even and smooth without using extra cement complete all as specified and as directed
Demolition of cement concrete in ground floor and paving etc not exc 15 cm thick above or below ground level complete all as specified and as directed
M&L for PCC 1:2:4, Type B-1, using 20 mm graded stone aggregate, 40 mm thick as in floors etc finished even and smooth without using extra cement complete all as specified and as directed
M&L for PCC 1:3:6, type C-2, using 40 mm graded stone aggregate 75 mm thick as in floor/plinth protection finished even and smooth w/o using extra cement complete all as specified and as directed
M&L for Preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of interior primer, over & including a coat of wall care Putty complete all as specified and as directed
M&L for preparing new plastered or unplastered surfaces of wall/Ceiling and applying three coats of white wash complete all as specified and as directed
M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) over a coat of primer of same make including scaffolding for four storey building complete all as specified and as directed
Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for exceeding 250 litres but not exceeding 500 Litres capacity of tanks complete all as specified and as directed
Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for exceeding 250 litres but n.exc 500 Litres capacity of tanks complete all as specified and as directed.
M&L for cutting trees including cutting of trunks and branches and digging out roots from floor or roof and walls making good the dismantled portion in cement mortar (1:3) girth of trees 30 cm complete all as specified and as directed.
S&F in repairs 25 mm bore mild steel 0.8mm thick curtain rod pipe with PVC ribbed lamination of required length for curtain rods including two fixing mild steel powder coated matching colour full round or half round with fixing nuts (bracket holders), & PVC golden finish end knobs (Two noumber for each curtain rod of any length) and PVC gold finish curtain ring @ 3 nos/feet complete all as specified and as directed.
S&F in repairs aluminium sheeting 0.50 mm thick, fixed to wooden shutters with CP screws including cutting to required size etc. complete all as specified and as directed.
S&F in repairs mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tracks or galvanised wire staple complete all as specified and as directed.
Hacking out old broken glass of any thickness/size of any description from steel/wooden frame glazed with putty or fixed with beads complete all as specified and as directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and as directed
S&F 4mm thick Figured glass ,pin head type and glazing with oil putty in sqr n exc 0.5 sqm in each pane etc. complete all as specified and as directed.
S&F in repairs block board grade 2 quality, exterior grade commercial type 18/19 mm thick fixed in repair in copboard shutter & parations including 0.90 mm thick decorative laminate type 1 on one side surface finish of colour and pattern as approved fixed with approved adhesive complete all as specified and as directed.
M&L for prepration of new wood or wood based surface not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for welding in repair in any situation and in any position such as hinges and similar articles etc for steel door, gates, window, ventilatiors and grills etc for upto four stoery building complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.
M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate in sub base of floors etc. complete all as specified and as directed.
M&L for non skid coloured ceramic tiles jointless 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match over and including 15mm thick screed bed in cm 1:6 for laying floor finish complete all as specified and as directed
Glazed ceramic coloured tiles as per IS-13753, 350mm x 250mm x 7 mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match in vertical surfaces such as skirting/dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10m thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing coat complete all as specified and as directed.
M&L for non-skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, infloors etc. set and jointed inneat cement slurry andpointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and as directed
Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender
P R Constructions
verma enterprises
A N BUILDERS
ramveer Singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .