PERIYAR STATUE PEDESTAL ARRANGEMENTS FOR GRAND LIBRARY IN COIMBATORE DISTRICT

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means

Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

For Foundation and Basement

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMT and all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

For Foundation and Basement

Brick work in Cement Mortar 1:5 (One Cement and Five Crushed Stone sand) using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge.

For Foundation and Basement

Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers -Mixing by Manual means

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200x600 of 16/18mm thick of cera Grey and Variety with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work)

Providing Single Nosing for Granite Stone Slab etc., complete complying with standard speicification and as directed by the departmental officers

Supplying and fixing Bangalore stone flamed granite of 600mm x 600mm x 40mm thick including laying, Transportation ect., Complete complying with standard specification and as directed by the departmental officers.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Providing a full view bronze metal statue, with a height of 6 Feet and a weight ranging from 900 kg to 1000 kg. The placement of the statue will be in an appropriate position as approved by departmental engineers. The scope of work includes scale measurement drawing, sculpting armature fabrication, clay modelling, Plaster of Paris (POP) Mould creation, model transfer to wax, sand Mold (wax-core) production, dewaxing, bronze casting of the model, grinding, welding, chiselling, finishing with a PU gold coating, transportation, and erection on a pedestal at the designated site, as directed by departmental officers etc., Complete compliance with standard specifications.

Digging out the soil upto 150mm depth, all the debris, stones, weed roots or any other material shall be removed. ,Spreading and leveling of garden soil, red earth or equivalent soil, farm yard manure , and bio-fertilizers mixture to required depth,to formation of mound or undulated lawn and rolling , grading area as shown as drawings.

Supplying and planting of healthy well grown tree sapling, special effect/accent plant in 12' bag size, minimum 1.5- 2 mts in height, without damage of branches and roots, excavation of pit size 750mm x 750mm x 750mm and backing filling of topsoil, red earth or equivalent fertile soil, compost,bio-pesticides with proper stacking and wrapping. Rate includes plant cost, soil mixtures, transport, supervision,etc., complete complying with standard specification and as directed by the departmental officers.

Terminalia mantaly- 2200mm

Areca palm- 1700mm

Plumeria acutifolia-1500mm

Raphis excelsa- 450mm

Please Enable Macros to View BoQ information