ADDN ALTN OF OTM ACCN AT MOUNT ABU UNDER AGE I UDAIPUR

Amount

Dismantling of Manglore pattern or similar tiles in roofing.

Dismantling of timber battens for tiles of any size including tilting fillets spaced exc. 15 cm etc.

S&F Manglore pattern tiles in roofing interlocking at side joints, laid dry.

Refixing old Manglore pattern tiles in roofing interlocking at side joints, laid dry.

S&F Clay burnt ridge or hips tiles to suit Manglore pattern roofing tiles bedded and jointed in cement mortar 1:6 etc.

Dismantling of timber scantling 40 sqcm and over in sections in any position in unframed works.

Dismantling of timber scantling below 40 sqcm in sections in fillets, rails, rafters, purlins etc.

M&L for IInd class hardwood battens clean sawn at 30cm centres and sectional area exc. 5 sqcm & not exc. 15 sqcm over & including one coat of creosote oiling on battens complete.

M&L for second class hardwood (SAL) scantling clean swan in unframed work as in raftars, purlines & trusses etc all as specified and directed complete.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering

S&F galvanised 0.63 mm thick corrugated mild steel sheeting class 8 with two corrugations side lap fixed with L-type or J-type screws in roofs coering

Fixing only CGI sheeting of any gauge with two corrugation side lap fixed with 'L' or 'J' hooks in roofs including cup washer etc complete all as directed.

S&F 0.80 mm thick plain galvanised mild steel sheeting in eves board, ridges, hips, valley gutters, drip and straight flashings class 8 with two corrugations side lap fixed with L-type or J-type screws in roofs

M&L for rolled mild steel sections in rafters, purlins and posts or hollow square pipe as in tiles battens/ purlins, nut bolts etc . where connected to common rafters and runnuing rails fixed with angle cleats or other connecting plates and nut, bolts etc. confirnimg to Fe-290 (Gde E-165).

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast con-crete articles

M/L for brick work with kiln burnt bricks built in cm (1:6) using sub class 'B' bricks of compressive strength not less than 35 Kg/Sqcm straight or curved on plan exceeding 6 mtr mean radius with old size bricks all shown on drawing and as specified.

Taking down cement plaster on brick/stone walls etc including raking out joint, hacking for key scrubbing down with water etc.

M&L rendering 15 mm thick in cement mortar 1:6 on walls, surface finished even & smooth without using extra cement etc.

M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/roof/ceiling mixed with and including liquid water proofing compound as per manufacturers' instn surface finished even and smooth without using extra cement.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness.

M & L for 50 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished complete. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in fdn, surface channel,cills copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges complete.

M&L PCC type B-0, 1:2:4 (using 12.50 mm graded stone aggregate). 25mm thick in floor, surface finished even & fair.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M & L coloured Non Skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4.

M & L for double charged light coloured tiles 8-10 mm thick, size 600mmx 600mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4.

M&L for light coloured glazed ceramic tiles 600 x 300 x 7 mm thick, on vertical surfaces such as dados and risers to steps etc., set and jointed in neat cement slurry and pointed in coloured cement to matchover 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete.

M & L Machine cut Kota stone slab flooring 18-20 mm thick jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6

M & L Kota stone slab 16-18 mm thick in riser of steps, skirting, dado and pillars etc laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

Suspended false ceiling system using Chicago metallic (E - grid) exposed suspended system, grid size 600mm x 600mm compressing of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 mm+ PPPCGS/0.3 mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame)

Taking down Chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each (Without taking off shutters from the frame)

Taking down old wooden/pvc door Shutter not exc 1 sqm each

Taking down old wooden/pvc door Shutter exc. 1 sqm and not exc . 2 sqm each

M&L IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned a joints complete.

M&L for 35mm thick factory made ASCU vacuum pressure treated kiln seasoned IInd class hard wood plain framed panel shutter (two panels or more) with lock rails and panel of 9mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veering on both faces. The size of rail and style as per I.S. 1003(Part-I)2001 ,complete all as specified and directed.

M&L for 35mm thick second class hardwood Factory made glazed and skelton door shutters open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete.

M&L for 30 mm thick second class hard wood factory made glazed and skelton windows shutters with sash bars open rebated & prepared to receive glass/wiremesh all as specified in SSR Part-I section 8, clause 8.24 (b) complete.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge

S & F PVC factory made shutter solid, PVC moulded prelam coloured on both side door shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design in framing at site as per specifications & drawings.

Supply & fixed steel windows box type ERW hollow 'P' section comprising double frame for and including gauged and glazed skelton shutter 30mm thick jointed internally with flat iron 25x3mm complete including hinges handle tower bolts, stops lugs,grill etc all as shown in drawing CECZ TD -219 sheet 1/3 to 3/3 as applicable complete Note :- For the purpose of measurement & payment double shutter with frame and grill shall be considered as one unit. (ii) Glazing,wire mesh & painting shall be measured & paid separately.

S&F 100 mm long aluminium alloy type C-22 butt hinges with galvanised ms hinge pin etc.

S&F 100mm long butt hinges med wt cold rolled mild steel and fixed

S&F 75 mm long butt hinges medium weight cold rolled mild steel and fixed

S&F 50 mm butt hinges medium weight cold rolled mild steel.

S&F 300 mm long Aluminium sliding door bolts, bolt type bolt 16 mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed

S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed

S&F 150mm long aluminium anodised handle cast type and fixed

S&F 100mm long aluminium anodised handle cast type and fixed

S & F Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 150mm long complete.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete.

S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples including complete.

Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads.

S&F 3mm thick sheet glass, plain or tinted ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane

S&F anodized aluminium powder coated (minimum thickness of powder coating 50 micron) in ventilators opneble or sliding any type etc wih one or more rebates including necessary jointing cleats for fixing etc.

Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample

Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair.

Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.

S&F 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors concealed or open of any length/short length including taking down or up all as specified and directed by Engr-in-charge.

S&F 20 mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length/short length including taking down or up all as specified and directed by Engr-in-charge.

S & F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia and wt not less than 1.50 Kg all as spd and directed.

S&F in repair 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore angle valves/stop valves cast copper alloy CP fancy type screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.

Supply and fixing (in repair) angle cock two way 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified.

S&F in repair 15mm bore pillar taps cast copper alloy chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge.

S & F cp jet spray with flexible tube etc complete all as specified & directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed by Engr-in-charge.

S&F in repair brass chromium plated soap tray/dish fixed with cp screws etc complete all as spd.

S&F in repair toilet paper holder of brass chromium plated fixed to walls with chromium plated (CP) brass screws etc.

S&F PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-charge.

S&F in repair PVC low level flushing cistern complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor all as specified and directed by Engr-in-charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe incl connection to out going pipe and flushing pipe complete all as specified and directed.

S&F repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-charge.

S&F in repair vitreous china wash basin with pedestal white flat back size 550 x 400mm, including 32 mm size cp brass waste fittings, PVC waste pipe 32 mm flexible type but excluding taps, chain & plug and porcelain stopper but incl brackets or fixed to walls with anchor fastners all as specified and directed.

S & F in repair vitreous china half stall urinal white incl. connection to flushing pipes, waste fittings & pipe, out going pipes and brackets etc.

S/F in repair urinal spreader chromium plated for fixing with 15 mm bore pipe etc.

S&F in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.

Material & Labour 18/19mm thick block board ,grade 2 quality interior grade, commercial type fixed with screw to timber frame work including taking down complete all as specified and directed.

Material & Labour Decorative laminate type 1 of 0.9 mm thick surface finish, colour and pattern as approved, fixed with approved adhesive as manufacturer's i complete all as specified and directed.

Supply & fixed Continious piano hinges, continuous type of mild steel bright finish or electro galvanized with width of flap (when open) 30mm complete all as specified.

Supply & fixed 75mm long stainless steel handle fixed with nut and screws to cupboard shutter complete all as specified and directed.

Supply & fixed magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, overall length of cover plate 140mm long complete all as specified

Disconnecting existing tank , setting aside (or lowering if required ) for repair cleaning etc and hosting if required reconnecting and re fixing in position after cleaning capacity of water tank 500 ltr to 1000 ltr capacity.

S&F in repair white coloured rotational molded polyethylene water storage tanks white tripple layered (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge.

S&F in repair PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes all as specified and directed by Engr-in-charge.

Taking down eves gutter and rain water pipes (any size or pattern), including all fittings, head shoes, bends, swan-necks atc., incl cleaning or refixing or removal to store (mesured overall as fixed along the centre line over fittings the accessories)

PVC (SWR) pipe with fittings single socketed in any length with rubber ring joints laid in tranches or in floor or fixed to walls with clamps etc. of 110mm dia complete.

S & F PVC (SWR) pipes with fittings single socketed in any length with rubber ring joints laid in tranches or in floor or fixed to walls size 75 mm bore with stack clamps etc.

S & F PVC (SWR) multi floor trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4).

Removing building materials to a distance of 100m or under, beyond the lead incl in the rates incl loading, unloading and stacking at the destination complete

Supply only liquid water proofing compound ISI marked.

Complete removal of existing surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots of walls complete all as specified and directed.

M&L two coats of oil bound distemper (acrylic) white or tinted over and including 1 mm thick wall care putty including preparation of new or old plastered surfaces of walls etc.

Material and labour for preparation of newly/old plastered surface of wall and applying two coats of cement base paint complete all as specified.

M&L two coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxzide primer incl preparation of surfaces complete.

Removing old paints by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth

M&L two coat of synthetic enamel paint over old/new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces compelte.

M&L for one coat of synthetic enamel paint on old painted steel surfaces of any description over 10 cm in width or girth including preparation or surfaces complete.

M&L two coat of exterior emulsion roof tile paint coloured on roof tiles and fascia of roof over one coat primer all as spd & directed.

M&L for machine Pressed precast concrete interlocking paver block rubberised moulded any shape & size conforming to IS- 15658 - 2006 of 80 mm thickness M-40 Grade with grey cement & pigment over and including average 40 mm thick sand cushioning complete all as specified.

Material and labour for 300x300x20-25mm thick chequered cement concrete tiles rubberised moulded with grey cement and pigment set, jointed and pointed in neat cement slurry including laid over a screed bed of 20 mm thick in CM 1:6 complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Material & Labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade drawn through in concealed and PVC casing caping with all accessories as required and directed by Engr-in charge, fixed on the surface of Wall/ roof/ceiling / dash fasteners/ wooden gutties and cadmium plated screws as per IS on existing/new if required at site sunk type CI/GI Steel/Wooden terminal with suitable for regular/Modular boxes with 3 mm thick laminated sheet concealed in wall etc. including 1.5 sqmm unsheathed copper continuity conductor connected to common earth dolly, suitable for (a) One light / ceiling fan / Exhaust fan point controlled by one 5 Amps SP switch.

All as per item no. 107.00 here-in-above but suitable for one 5 pin 5 Amps socket outlet on same board

All as per item no. 107.00 here-in-above but suitable for one 5 Pin 5 Amps socket outlet on independent board

All as per item no. 107.00 here-in-above but suitable for one light point controlled by two 2-way switch

All as per item no. 107.00 here-in-above but suitable for one power point with 2.5 sqmm copper conductor including 2.5 sqmm unsheathed copper continuity conductor connected to common earth dolly and controlled by one 15 Amp switch

Supply & Fixing switch piano type, flush button single pole, one way 5 amps complete all as specified and directed.

Supply & Fixing switch piano type, flush button single pole, two way 15 amps complete all as specified and directed.

Supply & Fixing switch piano flush button, 15 Amps, single pole one way complete all as specified and directed.

M&L socket outlet 5 amps, 5 Pin, flush type complete all as specified and directed.

M&L socket outlet 2 in 1 ,3 pin, 5 Amps and 15 Amps flush type complete all as specified and directed.

Supply & Fixingixing inreplacement of for ceiling rose, surface type bakelite 65 x 50 mm three terminal complete all as specified and directed.

Supply & Fixing inreplacement of lamp holder , insulated body cord grip pattern suitable fixing on wall/ pendant fittings.

Supply & Fixing inreplacement of ceiling fan regulator step up type 230 volts suitable for 1200/1400 mm sweep ceiling fan complete all as specified and directed.

Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan

Disconnecting electric connections and taking down old unserviceable main switches/ DB’s sheet metal enclorsures 02 ways, 4 ways, 8 ways/ duly fitted with MCB’s/ cutouts 32 amps capacity including unserviceable wooden boards and making good the disturbed surface of the wall/ceiling.

Supply & Fixing MCB distribution box single door powder coated sheet metal encloser 240 volts SPN 12 ways, including 200 amps rated bus bar of the following type.

All as per item no. 122.00 here-in-above but suitable for 8 ways

All as per item no. 122.00 here-in-above but suitable for 4 ways

Supply & Fixing MCB distribution box single door powder coated sheet metal encloser 415 volts TPN 4way including 200 amps rated bus bar all as specified.

Supply & Fixing of MCB TPN 63Amp in the DBs catered above

All as per item no. 126.00 here-in-above, but MCB SPN 40 to 63 Amp

All as per item no. 126.00 here-in-above, but MCB SP 6 to 32 Amp

Disconnecting of unserviceable sub main wiring/Service connection of any size and including steel conduit and accessories & removing from site and making good the disturbed surfaces complete all as specified and directed.

S&F for Submain wiring with two run of single core 2.5 Sqmm multi stranded copper conductor cable drawn through and incl 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of earth continuity conductor with 2.5 sqmm multi stranded copper conductor cable all as specified and directed . Note :- Two run of single core cable and one run of earth continuity conductor and one metre of conduit shall be measured as one unit complete all specified and directed by Engr-in-Charge

S&F for Submain wiring with two run of single core 4 Sqmm multi stranded copper conductor cable drawn through and incl 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of earth continuity conductor with 4.0 sqmm multi stranded copper conductor cable all as specified and directed . Note :- Two run of single core cable and one run of earth continuity conductor and one metre of conduit shall be measured as one unit complete all specified and directed by Engr-in-Charge

Taking down U/S earth plug and Supply & fix new metal clad 20 Amp 230 volts single pole and neutral and earth enclosure with two pin and earth plug with socket complete with one single pole MCB of 20 Amp 10 KA all as directed by Engineer-in-charge

Material & Labour for Earthing complete as per electrical plate No 5 of MES SSR Part I with galvanised Steel plate earth electrode 600mm x 600mm x 6mm buried directly in ground in a earth pit of depth not less than 2.25 meter below ground level , the top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to galvanised iron or steel earth lead wire 4 mm dia as earth lead by means of bolts, nuts and washers of GI & steel earth lead protected by galvanised iron or steel pipe 15 mm dia light grade and connected to main switch board or main control board watering pipe with funnel on upper side shall be 20 mm dia GI medium grade including excavation and earth work in any type of soil, PCC pit, CI frame , CI cover 10mm thick with hinged to CI frame complete. Note :-(i) Irrespective of what is shown in electrical plate , the concrete pit shall be in PCC 1:3:6 type C-1 and 40 mm thick pre-cast Cover slab of RCC 1:2:4 type B1 using 20 mm Graded stone aggregate with suitable handle. (ii) Items includes the cost of GI pipe for protection of earth strip including earth lead up to7.5 meter Each 01

Taking down old Sheet metal enclouser and supply and fix new sheet metal enclouser cubical type factory fabricated made out of 1.6 mm thick CRCA sheet with front side openable single door system powder coated painted to shade RAL 7032, PL Gasket, hinged single door ,IP-55 mounting plate made out of 2mm thick CRCA sheet steel and earth bolts etc. of size 600x500x200mm all as speceified & directed by Engr-in- charge. Note :-- Cost of any minor modification if required in fixing of the sheet metal enclouser as per site requirement and making good the disturbed surfaces matching with existing finish, will be deemed to be included in the cost of this item.

Taking down old U/S exhaust fan and supply and fixing PVC exhaust fan of size 200mm sweep with louver 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed.

Supply and Fixing LED light fitting 1x18W,220V, AC decorative box type with driver, holder including LED tube light connection up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.

Supply and Fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 Watt 220V, AC decorative type with driver, holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

BB ELECTRICALS

SHREE BALAJI TRADING CORPORATION