Special Repair of Govt. Polytechnic at Lisana at Rewari in Rewari Distt. (Girls Hostel)

Amount

Scraping (c) cement plaster [HSR 8.32 (c)]

Dismantling white or coloured glazed tiles (to be carefully removed) [HSR 8.38]

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing (b) in cement [HSR 8.5 (b)]

Dismatnling Roofing (g) demolishing mud phaska in tile terracing [HSR 8.8(g)]

Stripping and stacking slates or tiles of a roof [HSR 8.10]

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the walls is not to be dismantlled [HSR 8.18] (a) doors

(b) windows

(C ) Venti.

Providing & Fixing Ist quality Ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including ointing in white cement mixed with pigment of matching shades complete. (b) size of ceramic Glazed tiles of Size 300 x 450 mm of reputed manufacturer like:- RAK, NITCO, KAJARIA shall be used as approved by Engineer-in-charge. [HSR 14.92(b)]. Note:- The Agency to whom the work is alloted will have to produce original bill / voucher for all quantity in token of proof of purchase of material.

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. [HSR 16.60]

Providing two coats of exterior acrylic emulsion paint. Ist Quality (HSR 16.79 (b))

Factory manufactured Solid Flush Door Shutter, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hotpressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position. (Note:- reputed make such as Duro, Green, Kitply will be used as approved by Engineer-in- charge.). HSR 17.93 (a) - Note 1 under 17.18] Note:- The Agency to whom the work is alloted will have to produce original bill / voucher for all quantity in token of proof of purchase of material. (ii) 35 mm thick

Factory manufactured panelled door or glazed windows shutters of commercial hard wood such as Hollock & Champ only. (non coniferous timber other teak, confirming to I.S. pecificationNo. 1003, Kiln seasoned) with 100mm wide vertical styles, 150mm wide lock rail 200 mm wide bottom rail, and 100mm wide other rails, with panels of 15mm thick, tongued and grooved of commercial hard wood nd including cost of iron hinges, screw, chock/cleats, stops nails etc. complete in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position). (b) 35 mm thick. [HSR 17.90 (b) - Note 1 under 17.18]

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete: - (b) door and window frame of size 76 mm X 38 mm with 35 mm wide single rebate [HSR 18.34 (b)]

Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coasts of bitumen laid hot at 1.65 Kg per sqm on top of R.C.C. slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. [HSR 13.13]

Painting two coats with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. [HSR 16.5]

Supplying and fixing glass panes including special metal sash putty of approved make (b) glass panes 4 mm thick, exceeding 40 sq dm areas. [HSR 18.30 (b)]

Applying pink primer or aluminium priming ocat on wood work including preparation of surface, Knotting and stopping etc. [HSR 16.2]

Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (J.K. / Birla make) (HSR 16.81)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. [HSR 16.25]

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. [HSR 16.1]

12 mm thick cement plaster 1:6 [HSR 15.7]

Recovery items: The rates quoted against recovery items will not be included in the total amount rather is will be deducted while calculating financial statement of the agency. Material obtained from dismantling of existing brick work, bituminous layer and granular layer have been calculated taking assumption that 80% of theoretical material will be retrieved. The dismantled material can used in any of the item for the work after modification (bringing it to required specification) after approval from employer. In case it is not possible to use this material on the work, the agency can take away this material. This material can be taken away by the agency at the price quoted by the agency but minimum price to be quoted is limited to reserve price as fixed and mentioned as under:- Good Brick tile @ 4.50 Each

Brick tile bats @ 400 P.Cum

Old Chowkats @ 200 Each

Old Flush Door @ 100 Each

(21.03 B) Ventilator @ 80 Each

Glazed window @ 50 Each Note: - All quantities of the above materials have been worked out on the basis of theoretical quantities laid on this road. However, agency may visit site before quoting rates and assess the extent of retrieved material. There shall be no measurement after actual dismantling and if material after dismantling is found on lesser side, no claim of agency on this score will be entertained and full recovery on the basis of quoted rate and quantity exhibited in the BOQ shall be made. The reserve rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price.

P.H. Estimate Providing & fixing PVC Rain Water pipe of 6 Kg Pressure of ISI mark in cement mortar during masonary work. (HSR 13.89)

Providing & fixing PVC Bend ISI Mark. (HSR 13.90)

FIXING GALVANISED MALLEABLE IRON HOLDER BATS HOLD FASTS to pipe lines fixed on walls and ceilings including all cutting to walls and making good to original condition. [HSR 28.28] (i) 15 mm internal diameter

(ii) 20 mm internal diameter

(iii) 25 mm internal diameter

FIXING AND JOINTING GUN METAL PEET VALUES (HEAVY PATTERN) with hand wheels, on G.I. pipelines laid in the ground or inside buildings, INCLUDING CARTAGE from divisional stores or nearest railway station to site of works. [HSR 28.29] (a) 15 mm internal diameter

(b) 20 mm internal diameter

(c) 25 mm internal diameter

Constructing brick masonry inspection chamber sizes as given below upto 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 percent limer mortar 2:3 in foundation cement concrete 1:2:4 benching 12 mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2;4 slab 100 mm thick./C.C. topping 50 mm thick with 455 mm x 455 mm 610 mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint coplete as per standard design. (c) Size 600 mm x 900 mm inside (with 455 mm x 455 mm cover and frame light duty singel weighing 20 Kg with R.C.C. slab). [HSR 29.84].

(C ) Size 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with R.C.C. slab)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (to the approval of the Engineer-in-charge). INDIAN TYPE ORISSA OR ORYA WATER CLOSET SUITE for sinking into floor, with raised foot treads COMPLETE WITH 100 MM G.C.I.’P’ TRAP with or without vent as required and all OTHER NECESSARY FITTINGS as fully described in item no.30.1 above. (a) Size 580 mm (i) White [HSR 30.2 a(i)]

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (as approved by the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUIT, SYPHONIC TYPE, consisting of- VITREOUS CHINA WARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). (a) Single trap syphonic W.C. Suite (i) White [HSR 30.5 a(i)]

EXTRA OVER item nos.30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow black or white plastic seat and lid. (i) White plastic seat (Solid) [HSR 30.13 (i)]

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (ORDINARY) LAVATORY SUITES consisting of Lavatory in VITREOUS CHINAWARE size as give below ( to the approval of the Engineerin- charge) including china plug for tap hole where necessary ; R.S. or C.I.BRACKETS for building into wall including painting; 32mm C.P.BRASS WASTE WITH C.P. brass chain and rubber plug; 15mm C.P.BRASS SCREW DOWN PILLAR TAP WITH jam nuts or couplings best design (as approved by the Engineer-in-charge) ALL FITTINGS BEST INDIAN MAKE and; to the approval of the Engineer-in-charge. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS, FLOORS AND PAINTING OF FITTINGS ETC. WHITE Size 630mm X 450 mm with one no. tap [HSR 30.41 (a) (iv)]

PROVIDING AND FIXING IN POSITION 32MM DIA.G.I.WASTE PIPE EMBEDDED IN WALL or lead waste pipe (weighing 3.47kg. per metre and 2.8 mm thick) upto floor level including cost of wipped solder joint etc., complete (as required by the Engineer-in-charge) [HSR 30.48]

PROVIDING AND FIXING IN POSITION BEST QUALITY STAINLESS STELL SINKS WITH COMPLETE FITTINGS. AS FULLY DESCRIBED IN ITEM NO.30.51 ABOVE. a) 600mm X 450mm X 200mm [HSR 30.53 (a)]

PROVIDING AND FIXING 32 MM DIAMETER G.I. EXTENSION PIPE for Indian type W.C. suite complete in all respects. [HSR 30.16]

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with raw slugs embedded in walls with C.P. brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (a) 25 MM DIA C.P.BRASS ADJUSTABLE 750 mm long [HSR 30.68 a(i)]

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making good the wells etc. (a) C.P.BRASS (i) Soap dish large [HSR 30.70 a(i)]

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC.] (a) INDIAN MAKE (i) 600mm X 450mm [HSR 30.71 a(i)]

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge). (c) Bib cock [HSR 30.75 (C )]

Providing and fixing in position C.P. brass stop cocks (as approved by the Engineer in- charge) (a) 15 MM STOP COCK (i) Stop cock male and female end [HSR 30.76]

(b) 20 MM STOP COCK (i) Stop cock male and female end

Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing over flow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks completein all respects to the satisfaction of Engineer-In-Charge. (Except civil work).(HSR 30.119) 500 Ltr capacity

PROVIDING AND FIXINGIN POSITION M.S.OR HEAVY FLAT IRON CLAMPS made out of M.S. flat not less than 5 mm of the approved design for fixing C.I. SOIL WASTE vent or anti pipes to walls COMPLETE IN ALL RESPECTS INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS ETC., AND PAINTING. [HSR 30.88] (a) 100 mm internal diameter

(b) 75 mm internal diameter

DISMANTLING H.C.I.SOIL PIPES (a) 100 mm internal diameter [HSR 30.96 (a)] 100 mm dia

Providing & fixing PVC Rain Water pipe of 6 Kg Pressure of ISI mark in cement mortar during masonary work. (HSR 13.89) 100 mm dia

EXTRA FOR PROVIDING AND FIXING VITREOUS automatic flushing CISTERN INCLUDING FITTINGS and brackets instead of C.I. flushing cistern COMPLETE (b) 10 Litres capacity cistern (i) White [HSR 30.37 (b) (i)]

PROVIDING AND FIXING IN POSITION 32MM DIA.G.I.WASTE PIPE EMBEDDED IN WALL or lead waste pipe (weighing 3.47kg. per metre and 2.8 mm thick) upto floor level including cost of wipped solder joint etc., complete (as required by the Engineer-in-charge) [HSR 30.48]

PROVIDING AND FIXING IN POSITION AUTOMATIC BRASS BALL VALVES IN TANKS. (b) WITH PEASTIC BALL (iii) 25 mm internal diameter [HSR 30.110 (b) (iii)]

DISMANTLING H.C.I.SPECIALS (a) 100 mm internal diameter [HSR 30.97 (a)]

Provinding laying cpvc pipe with special completed in building 20 mm internal diameter of pipeline (DSR 18.7.2)

25 mm internal diameter of pipeline (DSR 18.7.3) Note :- In case of any difference in the unit and nomenclature of any of the HSR items of Civil & P.H. work depicted in this DNIT and the given in HSR, the unit nomenclature given in HSR shall be applicable.

Krishan Kumar, Contractor

Sandeep Yadav, Contractor

Pawan

Surender Singh, Contractor, Rewari

Vipin Kumar S/o Sh. Jagdish Singh, VPO Tiwala, Charkhi Dadri