Construction of 6 Nos. of Assistant Commissioner Quarters (Stilt plus 3 floors 1 block of 6 in 1) with development works at Royapettah Police Range, Leonard street in Chennai city.

E0001) Earth work excavation in all soils (including refilling) E0001 a) 0 to 2 mt.

E0005) Earth work excavation for Open foundation (excluding refilling) E0005 a) 0 to 2 mt.

E0005 b) 2 to 3 mt.

RE0006) Providing Anti-termite treatment to soil

F0040) Filling C.S. sand

Borewell Arrangements WS0258) Drilling of borewell anywhere including transportation from one place to another place in alluvial soil or sedimentary starta mud circulation method 150mm dia of clay and sand or sand stone shale pebbles boulders etc, WS0258.a) Drilling of borewell in upto 60m

F0046.a) Granular Sub-base with Graded Material (Table:- 400-1) - Plant Mix Method

F0026) Filling with Excavated Earth

F0046.b) Wet Mix Macadam (Table 400-13) including premixing the Material with water at OMC in mechanical mix plant carriage of mixed

F0016) Supplying and filling stone dust

CSMP0002) C.C.1:5:10 for Foundation & Basement

CSMP0003) P.C.C. 1:2:4 for Foundation & Basement and other similar works

F0017) Supply and laying of Hard core layer 300mm

C0042) Standardised concrete Mix M30 Grade Concrete C0042 a) In Foundation and basement

C0042 b) In Ground Floor

C0042 c) In First Floor

C0042 d) In Second Floor

C0042 e) In Third floor

C0042 f) In Fourth floor

C0015) Rain water harvesting using defunct borewell and providing perforated cover slab (M30) C0015 a) Providing pit

C0015 b) Augering 30cm dia

C0011) Prviding Augering 30 cm dia for compound wall (M30)

C0021) Providing Rain Water Harvesting well ring circular shape of 90cm dia, 60cm depth, 50mm thick using M20 grade concrete including steel fabrication.

BMP0001) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")

EL0151) Supply, delivery and fixing of following W LED Focus light fittings of best approved make conforming to ISI specification EL0151.a) 80 W LED Focus light fittings with Led (Higher end)

WS0279) Supply and Delivery of Openwell Pumpset with ISI mark IS 8034 without Panel Board of following capacity of electric motor pump set WS0279. i) 75 lpm x 50 m

BMP0002) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") BMP0002 b) In Ground Floor/Stilt floor

BMP0002 c) In First Floor

BMP0002 d) In Second Floor

BMP0003) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm thick (B.P.) BMP0003 b) In Ground Floor/stilt floor

BMP0003 c) In First Floor

BMP0003 d) In Second Floor

BMP0003 e) In Third Floor

BMP0003 f) In Fourth Floor

BMP0004) Brick work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm thick (B.P.) BMP0004 b) In Ground Floor

BMP0004 c) In First Floor

BMP0004 d) In Second Floor

BMP0004.e) In Third Floor

BMP0002 e) In Third Floor

FLMP0002) Plastering the top of flooring in CM 1:4, 20 mm thick

FL0107) Supplying and fixing of PVC Trims/ Corners beading suitable colour in toilet wall cladding in all floors

FLMP0001) Flooring with a bed of CC 1:5:10

FL0024) Finishing the top of flooring with cement concrete 1:3, 20 mm thick Ellispattern Flooring (No Sand)

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

FLMP0004) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3

FLMP0005)Supplying and fixing of Colour glazed tiles C.M 1:2, 10mm thick

CSMP0006) Plain cement concrete 1:4:8, for foundation using 40mm gauge hard broken stone jelly

FLMP0006) Supplying and fixing of colour Ceramic Tiles Anti skid using Grout (Tile Joint Filler).

EL0390.c) Triple Pole 63A,10KA MCB

FLMP0009) Supplying and fixing of Stain free Nano polish Vitrified Tiles of size (600x600x8mm) for flooring

FLMP0011) Supply and laying of superior variety Concrete Designer tiles for flooring in CM 1:3

FL1054) Providing water proofing treatment for the toilet sunken portion with epoxy coat

FW0004) Formwork using M.S.Sheet FW0004 a) For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

FW0004.b) Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts,sill slab,staircase,portico slab and other similar works

FW0004.c) For Square and rectangular columns and small quantities

FW0004.d) Vertical wall

FW0004.f) Curved surface

FL0105) Providing single nosing to the edges of Granite slab of 10 mm thick

FW0019) Providing two legged scaffolding using 15cm diameter casurina props or best quality FW0019.c) 8m height in addition of 2.5m height

PLMP0001) Plastering in C.M. 1:5, 12 mm thick

PLMP0002) Plastering in C.M. 1:4, 12 mm thick

PLMP0003) Spl. Ceiling plastering in C.M. 1:3, 10 mm thick

PLMP0004) Plastering with CM 1:3, 12mm with WPC

PLMP0005) Cement mortar Border in C.M. 1:5, 12 mm thick PLMP0005 a) 150 mm wide

PLMP0005 b) 75 mm wide

PLMP0005 c) 50 mm wide

PA0022) Painting - New "wood work"

PA0026) Painting - New "iron work"

PA0037) Painting the false ceilling / New walls with two coats of 1st class ready mixed plastic emulsion paint of best approved quality colour and shade

FLMP0013) Supplying and fixing of Jet black Granite Tiles (superfine polished with machine cut edges) of required sizes of 10 mm thick for wall cladding

PA0042) Providing two coats of Exterior Emulsion paint including primer for outer walls

PA0032) Supplying and applying of Full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls

PA0037.a) Painting the Ceiling with one coat ready mixed PLASTIC EMULSION PAINT of first class quality paint of approved colour and shade

SA0139) Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings confirming to I.S. specification SA0139 a) CP Shower Arm with Overhead Shower Rose

SA0139.b) CP two Way bib cock with health faucet

SA0139.c) CP Angle cock tap

SA0139.d) CP Wall Mixture Tap 3 in 1 system with Hand Showers

FW0019.f) 15.5m height in addition of 2.5m height

PA0027) The new wood work with two coats of best melamine polish/varnish of approved quality and brand

J0001) Supplying and fixing of Teak Wood wrought and put up for frames of doors, windows, ventilators, cupboard and any other similar joinery works J0001 a) Teak wood over 2.00 metre and below 3 metre length

J0001 b) Teak wood below 2.00 metre length

JV0022) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

JW0042) Supplying and fixing in position of UPVC window of casement type( open) for all sizes

BMP0002 f) In Fourth Floor

JD0095) Supply & Fixing of WPC Decora Door set where the Door shall be extruded as a single core door wi

SA0139.h) CP Shower stop cock (Valve)

JW0007) Supplying and fixing of best Indian Teak wood openable French window of following size having single bay openable with frame JW0007.b) 900 mm x 1800 mm

JD0014.I) Supplying and fixing of Best Indian Teakwood Panelled door shutters Single leaf in position using 75mm x 37.5mm styles and 2 Nos. of 150x37.5mm rails ( top and bottom) 3 nos. of 75mm x 37.5mm vertical styles and 18.75mm thick planks for panels JD0014.I.a) 750mm x 2100mm

JD0014.II) Supplying and fixing of Best Indian Teakwood Panelled door shutters Single leaf in position using 75mm x 37.5mm styles and 4 Nos. of 150x37.5mm rails ( top, middle, bottom and lock rail) 2 nos. of 75mm x 37.5mm vertical shorter styles and 18.75mm thick planks for panels JD0014.II.a) 900mm x 2100mm

JD0014.II.b) 1000mm x 2100mm

JD0014.III) Supplying and fixing of Best Indian Teakwood Panelled door shutters Single leaf in position using 125mm x 37.5mm styles and 4 Nos. of 150x37.5mm rails ( top, middle, bottom and lock rail) 2 nos. of 75mm x 37.5mm vertical shorter styles and 18.75mm thick planks for panels JD0014.III.c) 1200mm x 2100mm

GR0001) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate

RE0009) Anticorrosive treatment for window grills

GR0056) Supplying & fixing of Stainless steel Hand Rails for Staircase

RE0012) Supplying, fabricating and placingof Mild Steel Grills Fe550D (Corrosion resistant reinforcement) of all diameters for reinforcements for all floors

CS0012) Providing Cuddappah slab of 20mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works CS0012 a) Ground floor

CS0012 b) In First floor

CS0012 c) In Second floor

CS0012 d) In Third floor

CS0015) Providing Cuddappah slab of 40mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works CS0015 a) In Ground floor

CS0015 b) In First floor

CS0015 c) In Second floor

CS0015 d) In Third floor

JD0009) Supplying and fixing of Best Indian Teakwood Panelled door shutters Single leaf in position using 125mm x 37.5mm styles and 3 Nos. of 150x37.5mm rails ( top and bottom) 3 nos. of 75mm x 37.5mm vertical shorter styles and 18.75mm thick planks for panels with brass fitting JD0009.c) 1200mm x 2100mm

CS0033) Supply and laying Jet Black Granite slab (superfine polished with machine cut edges) of size 4'x 2' 18 to 20mm thick for kitchen arragenments CS0033.b) In First floor

CS0033.c) In Second floor

JD0099.a) Providing Cup-board Shutter with frame using termite /water proof plywood of 19mm thick

FLMP0018) Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm

FL0003) Providing Bitumen pad for Expanision joint, 20mm thick

MS0050) Supplying and fixing of C.I. steps of approved quality and brand (not less than 5kg each)

WS0033) Supplying and fixing of half turn C.P Long body Tap of 15mm dia of best quality

WS0036) Supplying and fixing of half turn C.P short body Tap of 15mm dia of best quality

WS0004) Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of following litres (excluding free board) of approved brand (superior variety) with ISI Mark WS0004 c) 1000 lit

SA0114) Supply, delivery and fixing of Stainless steel sink following size using 32mm dia ‘B’ class G.I. waste water pipe and 32 mm dia C.P. waste coupling (sample should be got approved from the Executive Engineer before use) SA0114.b) 600mm x 600mm x 200mm thick

CS0033.d) In Third floor

WS0025) Supplying, laying and jointing the following dia of UPVC Pipes of schedule 40/ schedule 80 with ISI mark of best approved quality (above ground level) WS0025.a) 32 mm dia UPVC pipes schedule 80 with required UPVC specials

WS0025.c) 50 mm dia UPVC pipes schedule 80 with required UPVC specials

WS0025.d) 25mm dia UPVC pipes schedule 80 with required UPVC specials

WS0007) Supplying, laying and fixing of following Pipe of best approved quality for Hot water line fully concealed in walls WS0007.a) 20mm dia G.I. pipe ‘B’ Class

SA0002) Supplying and fixing of porcelin Wash hand basin (white without pedastal), superior variety of size 550 x 400mm with all accessories

SAMP0001) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick

SAMP0003) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety)

SA0113) Supplying and fixing of PVC low level flushing tank (White - 10 litre capacity) with all internal fittings (wall mounting type)

SAMP0004) Supply and fiixng of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.

SAMP0005) Supply and fiixng of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

SA0023) Supply and fiixng of E.W.C.(White) 500 mm with PVC SWR grade "P" or "S" TRAP

SA0034) Supplying and fixing the following dia PVC (SWR) pipe with ISI mark SA0034.a) 110 mm dia.

SA0034.b) 75 mm dia.

SA0035) Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for waste water line

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 SA0048 b) 160 mm UPVC Non Pressure pipe

JW0045) Supply and fixing of UPVC Sliding Window (Two Track)

MS0002) Supply and fixing of 20 mm dia Alu. Hanger Rod

MS0003) Supply and fixing of Alu Towel rail 75 cm long

MS0006) Supply and fixing of 5 pin Coat stand

MS0007) Supply and fixing of chromium plated 8 guage Picture Hook

MS0008) Supply and fixing of of Bevelled edge mirror 500 x 400 x 5.5mm

L0001) Supply and planting avenue trees

L0004) Providing Tree guard

EL0003) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. ( PVC Box , Fire Retarded Box) For Coastal only) EL0003 a) Light point with ceiling rose

EL0003 b) Light point without ceiling rose

EL0003 c) Calling bell point with Buzzer/Calling bell

EL0011) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.(PVC Electrical Box )

EL0019) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.(PVC Electrical Box )

SA0070) Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement SA0070 b) 600mm x 600mm

WS0003) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe UPVC "U" Bracket / clamps

EL0042) Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box , Fire Retarded Box)

EL0214) Earthing Station IS3043 (Type I)

J0029) Supplying of mild steel hold fasts horizontally twisted of size 230 x 40x 4mm with pair of suitable iron screws

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook of 100mm dia, 75mm depth and 3mm thick

EL0076) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

EL0085) Supply and fixing of Exsaust Fan 225mm dia

EL0070) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder of best approved variety EL0070.a) 9watts LED bulb

EL0070.b) 12watts LED bulb

EL0047) Supply and fixing of 4' 18 watts LED Tube Light

EL0045) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

EL0035) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places. (PVC Electrical Box )

EL0164) Supplying and fixing of 63 amps triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board

EL0298) Supply and fixing of electro mechanically operated three phase earth leakage circuit breaker/residual current circuit breaker (ELCB/RCCB)

EL0186) Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

EL0190) Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

EL0196) Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

EL0027) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point (PVC box Fire retraded box for COASTAL) @ Switch Board Itself

EL0206) Run of 4 Wires of 6 sqmm PVC insulated single core multi strand

EL0211) Run of 4 Wires of 10 sqmm PVC insulated single core multi strand

EL0252) Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

WS0015.I) Supplying, laying, fixing and jointing the following UPVC pipes as per ASTM D - 1785 of schedule 80 of wall thickness not less than the specified in IS 4985 suitable (Fully concealed in walls) WS0015.I.a) 20mm dia

th Lead-Free compound and the surface shall have Decora Design i.e, Non-porous Smooth Routing and 3D embossed wooden bark grains on one side.

EL0337) Supplying and delivery of following PVC aluminium armoured LTUGcable (PVC aluminium armoured LTUG 1100v grade) with ISI mark EL0337.b) 2 core 10 sq.mm.

EL0549) Charges for conveying and fixing of UG cables of sizes 4 to 25 Sqmm of 2, 3,3.5 and 4 core with necessary MS clamps, brass screws including cost of all materials redoing the dismantled portion, etc., all complete.

EL0097) Supplying and fixing of UPVC Exhaust fan fixing in the toilet and bath of approved ISI Quality

EL0345) Supply and fixing the following Aluminium Crimping Lugs suitable for the UG cable etc to complete. EL0345.f) 3.5 Core 25 Sqmm

EL0343) Supplying and fixing of brass cable gland suitable for following core and sqmm PVC armoured LTUG cable with earth strip around the gland and cable termination with crimping of terminal with lugs EL0343.b) 2 core 6 sq.mm.

EL0337.f) 3.5 core 25 sq.mm.

EL0343.c) 2 Core 10 Sqmm

EL0343.f) 3.5 Core 25 Sqmm

EL0163) Supplying and fixing of 32 AMPS Triple pole main switch

EL0235) Supplying and fixing of 1 no of 450x375x20mm thick TW plank

WS0017) Supply and fixing of following GI pipes `B` class of best approved quality,with ISI mark WS0017.c) 40mm dia GI pipe

EL0174) Supplying and laying of 8 SWG GI wire on wall below ground levels with necessary ‘U’ Nails, earth work excavation and refilling etc

EL0434) Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with Earth connection only.

EL0345.c) 2 Core 10 Sqmm

EL0565) Supply and run of 2 of No.8 copper wire for earth connections -

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator on the existing board etc., all complete (Excluding cost of fan)

NL0004) Supplying and fixing of Aluminium TNPHC Emblem of 30" height with approved coloured powder coat in finishing matt

NL0005) Supplying and fixing in position of following size aluminium die casting TNPHC Logo / Emblem with approved coloured powder coated in matt finishing NL0005.a) 30 cm (12") height TNPHC Emblem

NL0006.a) Supplying and fixing of 9" height Aluminium letters with approved coloured powder coated in matt finishing

NL0007.e) 5" dia plastic foam plate

NL0007.f) 8" dia plastic foam plate

EL0466) Supply and fixing of triple pole and neutral 4 way TPN 7 segment MCB DB with metal /acrylic door cover with IP 42 protection. (Higher end)

NL0007) Supplying and fixing of following size plastic foam plate of 3mm thick with 3" height vinyl cutting numbers with approved colours etc NL0007.a) 20"x 5"

MS0038) Supply and fixing of rubber round column guard of size 550mm height x 75mm (two corners each 75mm ) x 10 mm thick on the existing R.C.C Columns

WS0195) Supplying and fixing of following dia Ball valve WS0195.a) 32mm dia (Polypropylene with teflan seating)

EL0111) Supply and fixing of LED Street lighting luminaries suitable for fixing following watts LED lamp EL0111.b) 25watts LED lamp

EL0201) Run off following PVC insulated single core multi strand fire retard flexible copper cable with ISI mark EL0201.a) 4 wires of 4 Sq mm

LF0002) Annual Maintance Charges for the lift suppplied and installed for the period of four years after the free warranty period of one year LF0002.i) For Second one year @ 5% for capital cost

LF0002.ii) For Third one year @ 5% for capital cost

EL0343.i) 3.5 core x 70 Sqmm

EL0390) Supplying, Fixing and testing and commissioning of MCB in a sheet steel enclosure with earth connection on surface / recess EL0390.a) Double Pole 40A, 10KA MCB

EL0390.b) Double Pole 6A to 32A, 10KA MCB

EL0246) Supply and run of 25mm x 3mm tinned coated copper flat on surface or in recess for connections

EL0229) Supplying and fixing 3 nos of 100 amps 500 volts grade porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole/EB street pole with necessary clamps

Numbering & Lettering NL0002) Supplying, Fabricating and erection of M.S Scheme Name board

WS0200) Reaming from 140 / 150 mm dia pilot bore to 300 mm dia bore WS0200.a) Upto 60 m depth ending below ground level

WS0261) Supply and erection of following dia of PVC casing pipes (6Kg/cm2) as per IS 12818/2010 of approved quality for bore wells WS0261.a) 150mm dia of PVC casing pipes (6Kg/cm2) (Shallow depth)

WS0261.d) 200mm dia of PVC casing pipes (6Kg/cm2) (CM Casing Medium depth)

WS0149) Supply and delivery of 150mm dia of Ribbed screen PVC casing pipes (6Kg/cm2) without excise duty as per IS 12818/2010 of approved quality for bore wells

WS0150) Labour charges for inserting of Following PVC Casing pipes assembly (With slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., WS0150.a)150mm dia PVC Casing pipe

WS0150.b) 200mm dia PVC Casing pipe

WS0207) Supply and fixing of 160mm dia PVC end cap of approved make as per IS 10124/1982 Part-II for borewell top cover of 6.1mm thick with inner thread

WS0191) Charges for developing the borewell for the entire depth with air compressor of 300CFM capacity [Minimum 8 hours] including transportation, labour and fuel charges for compressor and conducting yield tests by V-notch method

WS0243) Supplying of following dia upvc column pipe for borewell b) 50 mm dia UPVC Column pipe

WS0235) Supplying and delivery of Nylon rope for Bore well for best approved quality for erection of submersible pumpset etc..

MS0059) Supplying of Godrej Navatal lock Ultra XL Lock with 3 keys with ISI mark etc.,

Street Light Arrangements EL0612) Supply and Erection of 7m Free Standing Double Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate

WS0160) Labour charges for the erection of submersible pumpset in borewell /openwell Upto 5 HP

WS0266) THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%)

WS0018 XIII) Supplying and delivery of following dia MS clamp sets as per IS 1239/part II for erection of submersible pumpset in wells WS0018.XIII.d) 80mm dia MS clamp sets

EL0346) Supply and laying of PVC insulated and sheathed follwing core and sq.mm flat type copper cable EL0346.c) 3 core 4 sq.mm flat type copper cable

EL0347) Labour charge for laying of following PVC insulated and sheathed flat type copper cable (For laying below GL including earth work ) EL0347.c) 3 core 4 sqmm

LF0002.iii) For Fourth one year @ 5% for capital cost

LF0024) Design, Supply, Delivery, Installation, Testing, and Commissioning of Passenger Lift of capacity 13 Persons with 3 Floors / 4 Stops / STAINLESS STEEL

owing dia of UPVC Pipes of schedule 40/ schedule 80 with ISI mark of best approved quality WS0025.d) 32mm dia UPVC pipes Schedule 40

WS0025) Supplying, laying and jointing the foll

WS0018.I) Supply and fixing of following dia GI Specials of best approved quality,with ISI mark WS0018.I.f) 32mm dia GI Union IS 1239/Part-II

WS0018.I.d) 50mm dia GI Union IS 1239/Part-II

WS0018.XVI.f) 50mm dia GM Wheel Valve

WS0018.XIV.d) 32mm dia gun metal gate valve

G0004) Insulation for the residential silencer (supply of residential silencer to be included under item for DG Sets) etc

EL0566) Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator

G0008.b) Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer complete with necessary supports, brackets

G0008.d) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool as per is 3677 / 1973 reinforced with chicken mesh and cladded with aluminium sheet of 26 swg and 50mm thick with 64 kg/cu. mtr. density etc

G0008.e) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe to prevent rain water entry to exhaust pipe with provision of drain plug in the system etc

G0005) APPROVAL FROM CEIG / CEA: Preparation of necessary drawings for DG sets for approval by Chief Electrical Inspector to Government / CEA, obtain approval

Genset Arrangements G0012) Supply of 58.5 KVA Diesel Generator Set with acoustic enclosure conforming to CPCB IV+ Norms and BIS Specifications with AMF Panel complete with all accessories

LF0002.iv) For Fifth one year @ 5% for capital cost

EL0344) Supply and providing cable end termination of following core and sqmm PVC LTUG Aluminium armoured cable EL0344.i) 3.5 core x 70 sq.mm

EL0220) Plate earthing with copper plate of size 600 x 600 x 3mm as per the ISI specification

WS0018 IX, X ,XIV) Supplying and fixing of following dia Gun Metal Specials as per IS Specifications WS0018.IX.c) 50 mm dia Gate Valve as per IS BS 5154)

EL0339) Supplying and laying of following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 m putting 0.15m layer of sand and covering the cable EL0339.a) 2 core 6 sq.mm.

CC0050) Advanced Technology Day and Night outdoor 5MP (5 Mega Pixel) IP CAMERA

WS0018.X.a) 50mm dia Non Return valve as per IS BS 5154)

CC0052) Supplying and delivery of 8 PORT POE NETWORK SWITCH

CC0057) Supplying and laying of CAT 6 CABLE, Sheilded FTP, Direct Burial Rated CMX, Bulk Ethernet cable 550MHz, ETL Listed, Black, with LAYING PVP pipe

CC0053) Supplying and fixing of 6U SERVER RACK with all accessories (POWER MANAGER Mounting accessories Etc.,)

CCTV Arrangements CC0049) Supplying and fixing of 16 channel digital 4k network (NVR) video recorder

CC0053.II) Supply and fixing of 4TB Terra Byte 4000GB Hard disk drive

CC0053.I) Supply and fixing of Camera mount Box with all connectors and configuration