Construction of new Watch Tower at different locations inside and outside of port area and 2 Nos. of rest rooms near Gate No.2

Amount

Part 'A' Civil Portion: Providing 300mm dia Single under reamed RCC M-20(Bored Compaction) Pile of 9m length from cut off level including welding of cages, boring through all strata from existing ground level with removal of obstruction if any, using bentonite, providing required reinforcement as per drawing, welded properly and disposing the boring earth out from the work site, including supply of all labour, materials, taxes, tollage, royalties, T&P etc complete exlcuding GST and as per direction of Engineer in charge. (Payment shall be made from cut off level). (Excluding Cost of Reinforcement. Bending, Binding Charges)

Cutting of pile heads upto 0.30m from cut off level and disposing the debrises clear out of the work site with supply of all labour, T&P etc. complete excluding GST and as directed by Engineer in charge.

Earth work excavation in all kinds of soil from the existing ground level in foundation trenches with all lead and lifts & levelling, ramming as per requirement etc with disposal of the excavated materials to identified locations by vehicles, dewatering if required etc. with supply of all labour, materials, T&P, hire & running charges of all machineries, Port entry fees, taxes etc all complete excluding GST and as per direction of Engineer in charge.

Back Filling in foundation and plinth with excavated materials moorum including watering and ramming but excluding cost of GST as directed by the Engineer-in-charge.

Shoring and shuttering for foundation trenches, pits etc. with supply of 38 mm thick non sal planks for poling boards and 10 mm thick non sal planks for walling and 125 mm dia non sal bullah for struting including putting close the wooden planks sheets for protection of excaveted earth pit with supply of all materials, labour, T&P, taxes, tollage transportations, etc. all complete but excluding GST as per direction of Engineer-in-charge.

Dewatering the stagnated seepage water from the excavated areas using 5 HP Diesel pump, discharging water to near by drains, basins and other approved points by sufficient length delivery pipe, including supply of all labour, T&P, all taxes, hire and running charges of pump, transportation of pumps from one location to other location, all POL, suction and delivery pipe, engagement of pump operator in all three shifts as and when required etc. complete excluding GST and as directed by Engineer in charge. NB : No idle hours shall be paid.

P.C.C(1:3:6) of using 40mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope compacting, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes, etc. complete but excluding cost of GST as directed by Engineer-in-charge

Cement concrete (1:1.5:3) using 12mm to 20mm size C.B.G. chips for all floors, foundation & plinth etc. of approved quality mixing, hoisting,laying, compacting, curing with cost and supply of all materials, labour,T&P, taxes, tollage, royalties, etc. all complete but excluding GST as directed by Engineer-in-charge.

Supply Tor/TMT steel manufactured by SAIL/TISCON/VIGAC Steel of Fe-500 confirming to IS-1786 including cutting, straightening, bending,binding & placing the grills in position for RCC works binding the grillswith binding wire of 18 to 20 gauge including supply of steel, labour,materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: Nopayment shall be made for extra weight than theoretical co-efficient).

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in-charge.

R.C.C. foundation and footing bases of columns mass concrete & precast slab etc.

Beam, column, girder

Lintel

Slab Landing

stairs railing waist slab

Brick work in Fly Ash Bricks of size 25cmx12cmx8cm having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge.

40mm. (av) thick graded cement concrete in C.C.(1:2:4) using 12mm. to 6mm. size hard granite chips of approved quality including cleaning the roof top, washing, mixing, hoisting laying to proper level slope, gradient making rounding hunching at the corners, joints, finished smooth to exposed surface over 2 coats of sika topseal-107 or equivalent as water proofing course with supply of all materials, labour, T&P, taxes, tollage transportations, staging, scaffolding, curing, etc. all complete but excluding GST as per direction of Engineer-in-charge.

Supplying, fitting, fixing up AL window (sliding type) made up aluminum Section 9778 as window fram, section No. 4095, 4096 & 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting including supply of all labour, materials, scaffolding up to any height transportation charges T&P, all taxes etc. complete by excluding GST as directed by the Engineer-in-charge.

Supplying, fitting & fixing of WPC (Wood Polymer Composite) solid frame for doors/window/ventilator of required Frame size (100mm X 75mm)as directed including fitting, fixing with using SS 150mm long anchor bolt with supply of all fittings, including cost of loading & unloading charges.With supply of all labour , materials, T&P, all taxes, transport charges, etc. complete as per direction of Engineer-in-charge (Excluding cost of GST). N.B. Colour & design decided by the department.

Supplying, fitting, fixing of 32 mm thick WPC (Wood Polymer Composite) solid doors/window/ventilator shutters of required thickness & size with required fittings ( T-bolt,SS hinges,SS handles,SS Aldrops & SS screw etc.) including cost of loading & unloading charges.With supply of all labour , materials, T&P, all taxes, transport charges, etc. complete as per direction of Engineer-in-charge (Excluding cost of GST). N.B. Colour & design decided by the department.

Supplying fitting fixing of Vitrified floor tiles ( premimum Quality 600 x600 mm size)in floors, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with white cement including rubbing and cleaning complete including supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete but excluding GST asdirected by Engineer-in-charge.

Supplying fitting fixing of 6.5mm to 6.7mm thick ceramic wall tiles (premimum Quality 200 x300 mm or 200 x200 mm size)as approved by EIC in floors, treads or steps and landing on 12mm thick bed of cement mortar 1:3(1cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes etc all complete but excluding GST as per direction of Engineer in charge.

Providing, supplying, fitting, fixing of M.S. grills for windows of approved quality & design including fabrication charges, with supply of all labour, T&P, materials, taxes, etc. all complete as per direction of Engineer-in-charge. Excluding GST.

16 MM thick Cement plaster with cement mortar (1:6) proportion,over brick work including racking out the joints, finished smooth to theexposed surface, rounding the corners wherever found necessaryincluding cost & supply of all materials, labour, T&P, staging,scaffolding, watering, curing, taxes, tollage, royalties, etc. complete butexcluding cost of GST as per direction of Engineer-in-charge

12 MM thick Cement plaster with cement mortar (1:6) proportion,over brick work including racking out the joints, finished smooth to theexposed surface, rounding the corners wherever found necessaryincluding cost & supply of all materials, labour, T&P, staging,scaffolding, watering, curing, taxes, tollage, royalties, etc. complete butexcluding cost of GST as per direction of Engineer-in-charge

Painting two coat with acrylic base plastic emulsion paint over two coat plaster of paris (POP) of approved quality shade including scraping, cleaning, washing with scraper filling the holes with plaster of paris preparing the surface by sand papering, applying paint uniformly including supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge.

Exterior painting two coats to wall surface with acrylic based weathercoat paint and one coat Priming with water bond cement primer of approved quality & shade having resistance to Fungus,Fading, including scraping, cleaning, brushing, washing the old paint, asand when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes,transportation, staging, scaffolding, etc. complete but excluding cost ofGST as directed by the Engineer-in-charge.

Painting two coats with approved quality & shade enamel paint onnew iron work over one coat of red oxide primer including scraping,cleaning, the old paint surface sand papering, filling the holes with waxputty etc. all complete including cost and supply of all materials, labour,T&P, all taxes, transportation charges, staging, scaffolding, etc. allcomplete but excluding cost of GST as per direction of Engineer-incharge.

Painting and writing of figures and letters on watch tower in different size upto 120 mm height with Supply of all labour, materials, T&P, taxes, etc. complete but excluding GST as directed by Engineer in charge.

Supplying, fitting & fixing of following PH materials of CERA/JAQUAR/Duravit or equivalent make with all accesories & U-PVC pipes of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST)

15mm UPVC Pipe (Supreme/Oriplast)

20mm UPVC Pipe(Supreme/Oriplast)

25mm UPVC Pipe(Supreme/Oriplast)

40mm UPVC Pipe(Supreme/Oriplast)

50mm UPVC Pipe(Supreme/Oriplast)

15mm Dia. U-PVC union

20mm Dia. U-PVC union

25mm Dia. U-PVC union

40mm Dia. U-PVC union

50mm Dia. U-PVC union

15mm Dia. U-PVC elbow

20mm Dia. U-PVC elbow

25mm Dia. U-PVC elbow

40mm Dia. U-PVC elbow

50mm Dia. U-PVC elbow

15mm Dia. U-PVC tee

20mm Dia. U-PVC tee

25mm Dia. U-PVC tee

15mm Dia. U-PVCsocket

20mm Dia. U-PVC socket

25mm Dia. U-PVC socket

40mm Dia. U-PVC socket

50mm Dia. U-PVC socket

15mm Dia. U-PVC MTA ( Brass Threaded)

20mm Dia. U-PVC MTA( Brass Threaded)

25mm Dia. U-PVC MTA( Brass Threaded)

40mm Dia. U-PVC MTA( Brass Threaded)

50mm Dia. U-PVC MTA( Brass Threaded)

15mm Dia. U-PVC FTA( Brass Threaded)

20mm Dia. U-PVC FTA( Brass Threaded)

25mm Dia. U-PVC FTA( Brass Threaded)

40mm Dia. U-PVC FTA( Brass Threaded)

50mm Dia. U-PVC FTA( Brass Threaded)

20mm PVC Ball Valve

25mm PVC Ball Valve

U-PVC Paste

Thread tape

110mm PVC Pipe

75mm PVC pipe

110mm PVC door bend

110mm PVC plain bend

110mm PVC P trap

110mm PVC NAHNI trap

110mm PVC Gully trap

50mm PVC floor trap

110mm PVC S/J with door

110mm PVC D/J with door

110mm PVC offset

75mm PVC door bend

75mm PVC plain bend

75mm PVC S/J with door

75mm PVC D/J with door

75mm PVC Cowl

110mm PVC Cowl

75mm PVC Clamp

110mm PVC Clamp

Commode EWC/AWC with cover with S-trap

10 ltr capacity PVC low level cistern

Health faucet

100mm dia shower

15mm dia C.P angular stopcock

CP waste coupling 32mm size half thread with 80mm height

20mm dia 60cm long towel rail

C.P Towel ring

CP glass self 600mm long

Soap Holder

5mm thick bevelleged plate glass mirror 24" x 18" size with masonite board and mirror screw.

125mm dia CP floor Grattings

Porcelain hand wash basin (parryware/Hindware/Hindustan)(16" x 22")

C.I basin bracket in pair

32mm PVC Waste pipe

15mm dia C.P Pillarcock (Plaza/Amber)

15mm long body C.P. Bib cock(Plaza)

15mm CP.Bibcock (Plaza/Amber)

15mm dia C.P stopcock(Amber/Plaza)

15mm dia CP Consealed Stopcock

15mm PVC Ball Valve

20mm PVC Ball Valve

25mm PVC Ball Valve

40mm PVC Ball Valve

50mm PVC Ball Valve

15mm Connection pipe (PVC/CP)

2000ltr capacity PVC sintex tank pure white colour -3 core

Making ferrule point excluding fittings etc including cost of all materials, transportation, all taxes etc. all complete excluding GST and as per direction of Engineer-in-Charge

Supplying of all materials, labour, T&P including all taxes tollage, royalities & constructing of Manhole Chamber, earth work excavation in all kinds of soil backfilling the same after work done, with CC(1:3:6) using 40mm & down CB metal of approved qty. over the bed of 0.25M thick, KB Brick having crushing strength Not less than 75Kg/Cm² to 99Kg/Cm², RCC cover slab with CC(1:2:4) using 20mm & down CB chips of approved qty. including bending, binding of Tor steel with bindig wire 18 to 20 gauge & centering/shuttering, Cement plastering(1:3) of 12mm thick to outside & inside & neat cement punning to the inside surface wall & flooring as per the approved specification & design . Size(1200 x1200 x 900)mm with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, curing, water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Supplying of all materials, labour, T&P including all taxes tollage, royalities & constructing of Inspection Chember, earth work excavation in all kinds of soil backfilling the same after work done, with CC(1:3:6) using 40mm & down CB metal of approved qty. over the bed of 0.25M thick, KB Brick having crushing strength Not less than 75Kg/Cm² to 99Kg/Cm², RCC cover slab with CC(1:2:4) using 20mm & down CB chips of approved qty. including bending, binding of Tor steel with bindig wire 18 to 20 gauge & centering/shuttering, Cement plastering(1:3) of 12mm thick to outside & inside & neat cement punning to the inside surface wall & flooring as per the approved specification & design . Size(762 x 762 x 457)mm with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, curing, water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Construction of 1.2 mtr. dia x2.55 mtr deep soak-way pit with dry brick walling up to 2.10 mtr. height & brick work with cement mortar(1:6) for balance 0.45 mtr height of wall top plaster (1:3) indise and outside filled with day brick khao of 50 mm to 100 mm size to a height 2 mtr from bottom covered by means of 40 mm thick perforated slab, 50 mmthick R.C.C well cover in Peices fitted with iron strings with all materials, labour, T&P, taxes, transportation charges, staging, scaffoldin but excluding GST etc all complete and as per direction of Engineer-in-charge.

Deployment of following machineries & labours for Dismantling ,Cutting, cleaning, spreading & levelling of the existing damaged AC sheet roof Rest rooms with all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge. ( No Idle Charges to be Paid)

Payloader

Un-Skilled Labour

Part 'B'- Electrification to new Watch Tower and Rest rooms: Supply of 4' x 18 Watt LED tube light fittings having inbuilt LED lamps.

Supply of 1400 mm sweep Ceiling fan.

Supply of 300 mm exhaust fan.

Supply of 90 watt LED Street light fitting complete with inbuilt LED lamps.

Supply,installation ,testing & commissioning of 300 W LED flood light as per scope of work.

Supply and wiring to 6 way BDB having 2 No. of 20 Amp. DP MCB & 4 Nos. 10 Amp. SP MCB with double door enclouser.

Supply,installation ,testing & commissioning of 63A,4P MCCB with enclousre as Main receiving panel as per scope of work.

Supply of 1.1 KV grade 4 C X 10 sq.mm. XLPE insulated G.I. flat armoured aluminium conductor cable.

Supply of 3½C X 25 sq.mm. aluminium round armoured XLPE cable.

Wiring to LED Light point with 6/10 Amp modular switch and copper wire alongwith modular board & plate.

Supply and wiring to 6/10 Amp. Plug point with provision of modular switch & socket along with modular board & Plate.

Wiring to ceiling fan point with 6/10 Amp. Modular switch and regulator alongwith modular board & plate.

Wiring to exhaust fan point with 6/10 Amp. Modular switch alongwith modular board & plate.

Wiring to 90 watt LED Street light with 3 Core X 1.5 sq.mm copper flexible cable.

Wiring to 20 A modular socket points as per scope of work.

Supply and wiring to 16 Amp. Plug point with provision of modular switch & socket along with modular board & Plate.

Fixing of LED light Fittings.

Fixing of Ceilling Fan

Fixing of exhaust Fan

Fixing of 90 watt LED street light fitting with suppy of G.I bend pipe.

Preparation of Kutcha cable trench of size 300 mm Width x 750 mm Depth as per scope of work.

Making of kutchha cable trench of size 300 MM.(width) X 900 MM.(depth) & laying of 3½C X 25 sq.mm. aluminium round armoured XLPE cable inside the cable trench & refill the cable trench with excavated soil.

Execution of earthing as per IE Rule including supply of all required materials.

Laying of 4 C x 10 sq mm Aluminium cable in the prepared kutcha trench & backfilling the trench.

LAXMIDHAR ROUT (BID ID -3260489)