REPAIR TO ROOF CEILING JOINERY AND SANITARY FITTING IN DEFENCE CIVILIAN MD ACCN UNDER AGE BR II UNDER GE DINJAN

Amount

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

Taking down cement plaster on brick walls/ concrete surface, etc. including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

Demolition of Cement concrete (unreinforcement) of any description and in any position not otherwise specifically provided for, all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Dismantling of asbestos cement corrugated or semi corrugated sheet in roof covering all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp,insulation etc) or insulation boards/slabs any thickness incl cover fillets all as specified and directed.

Dismantling timber boarding, any description, fixed in any position with nails complete all as specified and directed.

Dismantling of frame work timber scantling 40 sqcm and over in section in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Taking down chowkat or frame (without taking off shutter from the frame) not exceeding 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exceeding 1.5 sqm each but not exceeding 4 sqm complete all as specified and directed.

Taking down shutter of any description not exc. 1.00 Sqm complete all as specified and directed.

Taking down shutter of any description exc. 1.00 Sqm and not exc 2.00 Sqm complete all as specified and directed.

Taking down shutter and re-fixing in same opening of shutters of any description not exceeding 1 sqm each complete all as specified and directed.

Taking down shutter and re-fixing in same opening of shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing all as specified and directed.

Resecuring or easing and adjusting without taking down the shutter of size exc.1 Sqm and not exc.2 Sqm complete all as specified and directed.

Material & Labour for Brick work with sub class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM(1:6) complete all as specified and directed.

M&L for Half thick brick work with sub class "B" bricks straight or curved on plan exceeding 6m mean radius with old size bricks locaaly available built in cement mortar 1:4 complete all as specified and directed.

M&L cement concrete type C-2 (1:3:6), 75 mm thickness for sub base or floor finishes complete all as specified and directed.

Material and labour for Plain Cement Concrete (1:4:8), type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Material & Labour for 75mm thick cement concrete type C1 1:3:6 (20 mm graded aggregate) as in plinth protection including finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in cm 1:6 complete all as specified and directed.

Material & Labour Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) for reciving the wall tiles complete all as specified and directed.

Material & Labour Non Skid ceramic colour joint free tiles 7 to 8 mm thick (square/rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F non skid (joint free) ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, coloured tiles as in skirting. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for pre-polished coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick (glossy type), set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed.

M & L for Granite (of any type) tiles 18-20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types as in wash basin top complete all as specified and directed.

M&L for 450x300x7mm thick glazed ceramic colour tiles on vertical surface set in neat cement slurry and pointed in white or coloured cement complete all as specified and directed.

M&L GI wire netting of 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc in walls, ceilings etc. including all laps, cutting and waste fixed with tinned tacks of wire staples complete all as specified and directed.

M&L rendering 18 mm thick in two layers (12mm + 6mm) externally on one side of lathing in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement mixed with and including water proofing compound @ 2% on top layer of 6mm thick complete all as specified and directed.

M&L rendering 12 mm thick on other side of lathing in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement as specified and directed.

M&L 15 mm thick cement plaster in CM (1:4)( with approved water proofing compound) on fair faces of brick work incl finished even and smooth without using extra cement. (Note: WPC @ 2% of cement, will be paid separately) all as specified and directed.

M&L 15 mm thick cement plaster in CM (1:6) on fair faces of brick work incl finished even and smooth without using extra cement all as specified and directed.

Supply only Integral water proofing compound liquid all as specified and directed.

Material and labour for RCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in slab supported on walls, beams and column in floors, roof landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed. (Note : Reinforcement shall be measured and paid seperately under relevant)

Material and labour TMT bar 10 mm and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed.

Material and labour form work to soffit of suspended slab such as roof, floor slabs, landing similar work for rough finished surfaces of concrete, flat complete all as specified and as directed.

Material and labour form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exc 5cm but not exc 10cm wide for rough finished surfaces of concrete, flat complete all as specified and as directed.

Material and labour for 2nd class hard wood timber scantling, clean sawn as in frame work, fixed with nails complete all as specified and as directed.

Hacking out broken glasses (any thickness ; size, quality or description ) from wooden /metal frame complete all as specified and directed.

Supply and fix 3 mm thick ordinary quality sheet glass with oil putty or beadings supplied with joinery in square n exc 0.5 sqm in each all as specified and directed.

Supply and fix stainless steel wire mesh of 0.36 mm dia and average width of aperture 1.4 mm dia fixed with stainless steel wire staples and necessary welding work complete all as specified and directed.

Supply and fix in reapair stainless steel wire mesh of 0.36 mm dia and average width of aperture 1.4 mm dia fixed with stainless steel wire staples and necessary welding work complete all as specified and directed.

S & F in repair Harrison rails, mild steel, chromium plated Curtain rail with fixing brackets, stops, rollers etc all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as roof coverung/clading to wall , fixed with self tapping screws all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall/eaves board, fixed with self tapping screws all as specified and directed.

S&F 6mm thick AC corugated sheet or semi corrugated sheet fixed with 'L type or J type hooks in roof covering all as specified and directed.

S&F 6mm thick Asbestos cement two-piece adjustable plain angular ridge fixed with L-type or cranked hook bolts all as specified and directed.

Supply and fix 20 mm thick, second class hard wood boarding, planed one sides with butt joints and fixed complete in position as in eaves board, etc complete all as specified and directed.

S&F for false ceiling with exposed metal (PPGI) framework/ “Tee” Grid providing and fixing of suspended Tee gird false ceiling using “T” Gird System – powder coated GI (PPGI) exposed grid false ceiling suspension system in grid size 600mm x 600mm with main runner 32 x 24mm x 0.3mm thick, cross tee 26mm x 24mm x 0.3mm thick and wall angle 24mm x 24mm x 0.40mm thick using 4mm thick non asbestos fibre cement board (Make: Everest, type/pattern -oceanic or equivalent of Armstrong/Charminar) of size 595 x 595mm, an asbestos Free fibre cement board manufacture using high Pressure System Curing technology. T gird Framing is suspended using 4mm GI/MS bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip, also providing provisions for light fixtures, air conditioning diffusers and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at not more that 300mm from the adjacent wall. 1220mm/600mm Cross Tee to be interlocked between main runners @ 600mm c/c, so as to from 600mm x 600mm or 1200mm x 600mm grid, confirming IS 14862 & type B category III of ISO 8336, tested as per AS 1530 part – 3 & B. S- 476 part 4,5,6,7 & 8 should be placed in Gird module to form after and including dismantling of existing false ceiling of any type complete all as specified and directed.

Supply and fix for 2nd class hard wood in plain, solid, straight chowkats and framed, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Supply and fix for 35 mm thick 2nd class hard wood glazed and skeleton shutters (Factory Made), open rebated and prepared to receive glass, gauze etc (without sash bars)edges of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I, section-8, cluse 8.24 (a) complete all as specified and as directed.

Supply and fix for 30 mm thick 2nd class hard wood glazed and skeleton shutters, (Factory Made) open rebated and prepared to receive glass, gauze etc divided in to squares with plain, chamfered or rounded, fitted with cut or mitred sash bars (any numbers) timber beads for securing glass etc sizes of members of shutters as specified in SSR Part-I, section-8, cluse 8.24 (a) complete all as specified and as directed.

S&F for 35mm thick 2nd class hard wood panelled shutters (any number of panels) with lock rail & panel of 9mm BWP commercial ply or 12mm thick vineered particle board with commercial vineering on both faces. The size of rail & styles 150 & 100 mm complete all as specified and directed.

Supply and fix butt hinges 100mm long cold rolled medium weight complete all as specified and as directed.

Supply and fix in for 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix for 150mm long aluminium handles, cast type, anodised complete all as specified and as directed.

S & F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified and directed.

Supply and fixed in repairs butt hinges 100mm long cold rolled medium weight complete all as specified and as directed.

Supply and fixed in repairs in for 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixed in repairs for 150mm long aluminium handles, cast type, anodised complete all as specified and as directed.

S&F in repairs 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified and directed.

Supply and fix for PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

Supply and fix for factory made PVC door shutter 30mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and as directed.

S&F 75 mm size stainless steel butt hinges medium weight cold rolled all as specified and directed.

Supply and fix for 150mm long aluminium handles, cast type, anodised complete all as specified and as directed.

Supply and fix in for 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix in for mild steel frame works such as grills, gratings etc with ends of bars shouldered and/ or reveted, or forged in to spikes, framed guard bars, framed balusters, railing and similar works conforming to Fe-290 Gde-E-165 complete as in repair all as specified and as directed.

Supply and fix for mild steel works as in hold fast / Wind tie and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C1 (using 20mm graded broken stone aggregate) for fixing hold fast complete all as specified and as directed.

Taking down 15 mm bore GI tubing or up steel tubing and connection including cleaning complete all as specified and directed.

Taking down 20 mm bore GI tubing or up steel tubing and connection including cleaning complete all as directed.

S&F 15 mm bore GI pipe tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified.

S&F 20 mm bore GI pipe tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified.

Cutting chases, pinning in making good to facings brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings steps cills chases for concealed water tubing, not exc 10 cm girth complete all as specified and directed.

Supply and fix in repair, plastic water closet seat, white/ black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

Supply and fix in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply and fix in repair for ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, screwed for iron pipe 20mm bore ( min weight 210 gms), as in repair complete all as specified and directed.

Supply and fix in repair for PVC water tank top cover suitable for 250 to1000 Ltrs capacity all as specified and directed.

Supply and fix in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain or outlet complete all as specified and directed.

Supply and fix as in repairs vitreous china squatting pan of orissa pattern long pan size 580 mm x 440mm white front or back inlet and including provision of PCC or lime concrete bedding and 32 mm dia flush pipe etc and removal of debris complete all as specified and directed.

S&F as in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix in repairs 32 mm dia X 800 mm / 40 mm dia X 800 mm waste pipes for sink/wash/ Urinal hand basin complete all as specified and directed.

Supply and fix in repair Vitreous China wash hand basins white colour and flat back of size 550 mm x 400 mm excluding taps , waste chain and porcelain stopper but including brackets complete all as specified and directed.

Supply and fix in repair stop valve fancy type, chromium plated with long shank and cup (concealed type), screwed alloy, screed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed 15m bore pipe complete all as specified and directed.

S&F as in repair for angular stop cock/stop Valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions for 15 mm bore pipes fency type all as specified and directed.

Supply and fix as in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

Supply and fix as in repairs 15 mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, complete all as specified and directed.

S&F as in repairs for Gun metal gate valves with iron wheel headscrewed both ends for iron pipes or for unions for 20 mm bore pipes, fixed all as specified and directed.

Supply and fix as in repairs 50 mm bore high density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Supply and fix in repairs 15mm bore Bib tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms) all as specified and directed.

S & F in repair 15mm CP health faucet with tube & hook Jaquar cat part No. ALD-563 or equivalaent all as specified and directed.

S&F as in repairs for brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges all as specified and directed.

S&F In repair 500 Ltr capacity rotational moulded polyethyene water storage tanks (Cylindrical vertical with closed tap) twisted and fixed in position all as specified and directed.

Material and labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L for preparation of new steel surfaces of any description exc. 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for Preparation of new plastered surfaces and applying three coat of white wash on wall complete all as specified.

M&L preparation new plastered surfaces of brick work or previously untreated and applying two coats of oil bound distemper over one coat of alkali registant primer complete as all specified and directed.

Disconnecting water tank, float valve with float arm and outlet pipe from PVC service water tank, empting stored water through wash outlet, cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. and finally washing the internal surfaces with bleaching powder, closing wash outlet, re fixing water tank, float valve and out let in proper position, closing the top cover including minor repair if required and testing complete including writing “Cleaned on:_____(Date)” 2” height on outer face of tank with white paint of 500 liters capacity complete all as directed.

M/S C.P CONSTRUCTION (BID ID -3442435)

M/s Kanchan Enterprise (BID ID -3442717)

STANDARD ELECTRIC WINDERS (BID ID -3442174)

FREEZCON (BID ID -3442510)