Construction Of Academic Block of Govt. Degree College Kokernag

Amount

Clearance of site by way of removing garbage humps extracting of bushes by mechanical/ manual means including removal of same from site to out side municipal limits with roots making site workable for laying of layout for proposed building.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift surplus excavated soils as directed, within a lead of 50 m.(or as directed by the site engineer) All kinds of soil includig all carriages involved.

Providing & laying of stone soling hand packed in foundation trenches i/c all carriages, loading, unloading, etc. complete job.

Providing and laying in position cement concrete of specified grade M-7.5 excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), i/c all carriages, loading, unloading, etc. complete job.

Providing and laying in position cement concrete of specified grade M-10 excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), i/c all carriages, loading, unloading, etc. complete job.

Suplying and filling plinth with fine sand under floors inclduing watering, ramming consolidating and dressing complete, i/c all carriages, loading, unloading, etc. complete job.

Suplying and filling plinth with fine GSB under floors inclduing watering, ramming consolidating and dressing complete, i/c all carriages, loading, unloading, etc. complete job.

Filling available excavated earth ( excluding rock) in trenches, plinth sides of foundation etc. layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 mtr

Providing and laying in position specified grades of reinforced cement concrete M-25 grade in walls(any thickness) including attached pillasters, buttresses, plinth and string courses, filets, beams, columns, slabs, stairs,pillars, piers, abutments, posts and struts etc. using 20mm thick crushed stone agg., i/c all carriages, loading, unloading, etc. complete job. Excluding the cost of centring, shuttering, finishing and reinforcement. All work upto roof level.

All works upto plinth level

All works above plinth level

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached plinth and string courses etc.pilasters, butteresses,

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiral-staircases

Edges of slab and breaks in floors and walls under 20 cm wide

Steel reinforcement for R.C.C. for Footing, Columns , Beams, Slabs etc including straightening, cutting, bending, placing in position and binding all complete including welding etc of grade FE-500 D (Sail, Tata or Jindal make), i/c all carriages, loading, unloading, etc. complete job.Thermo-Mechanically Treated bars

Structural steel work welded in built up section trusses and framed work including cutting hoisting, fixing in position anchor bolts and applying a primer coat of approved steel primer. (Sail), i/c all carriages, loading, unloading, etc. complete job.

Brick work with F.P.S bricks of class designation 75 in super structure upto floor V in: Cement mortar 1:6 (1 Cement : 6 coarse sand) Inculding cost of all material & curing), i/c all carriages, loading, unloading, etc. complete job.

Half brick masonary with common burnt clay F.P.S ( non modular) brick of class designation 75 in superstructure above plinth level upto floor V level:in 1:3 cement mortar, i/c all carriages, loading, unloading, etc. complete job.

Providing and fixing ornamental eves boarding (300mmx 40mm)ist class kail wood fixed with screws etc,including all carraiges, loading , unloading , etc.All job completed

Proving and fixing of 12mm thick t&g planks made of imported wood panalling (new zealand) pine or equilant for soffits and ceilings. Including cost of necessary adhesive ,budloo wood backing and cost of nails etc, i/c all carriages, loading, unloading, etc. complete job.

Proving and fixing track deck crill make of equivalent H.I rib profilled sheet 1000 to1020 cover width 28-35mm high crests at 250 to 255 mm T.C.T (total coated thickness)high tensil S.M.P galvalume steel .The steel sheets shell have wide pains with 3 no staffing grips, i/c all carriages, loading, unloading, etc. complete job.

As per item( above ) for plain 0. 50 mm total thickness S.M.P. coated Galvalume steel of similar material for ridge, capping pieces at apex of sky lights/hips,valleys etc. including notching, turning down of edges of capping between ribs etc .complete(500 mm to 1000 mm)(0.50 mm thick), i/c all carriages, loading, unloading, etc. complete job.

15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) (including cost of all material, leads, lifts and carriages etc upto site of work complete).

12 mm thick cement plaster on ceilings, soffits etc. in (1 cement: 4 fine sand mix). Upto floor V level complete in all respects (including cost of all material, leads, lifts and carriages etc. upto site of work complete).

Providing and fixing of powder coated Aluminium work for doors /windows/ventillators/partition walls with aluminium pannels of required shape and size , built up standard tubular section/approporiate z section & other section of approved make confirming to is:733 & is 1285 (10 Gauge) fixed with rawal plugs and screws & with clips or expansion wholefasteners including glass panes of 5 mm thick with necessary filling up of gaps top botom & sides with required pvc, aluminum section shall be smooth ,rust free straight mitred and joints where required including cleat angles, beading for glazing /panelling c.p brass stainless steel screw handles tower bolts hinges etc

Providing and fixing wood work in frames of doors, windows and other frames, wrought framed and fixed in position including SS expansion fastners for brick / concrete work in (including cost of all material, leads, lifts and carriages etc upto site of work complete Ist class Deodar wood ) as per the directions of Consultant/as per the drawings enclosed

Providing and fixing 35 mm thick panelled door shutters (Ist class Kail Wood). with ornamentals Kail Wood pannels including necesary stainlless Steel Butt hinges /screws etc.Design of shutter and pannels as per the instructions of Engineer incharge complete in all respects.

Providing and fixing 35mm thick paneled or paneling and glazed shutters for windows and clerestory windows including I.S.I. Marked black enameled M.S. butt hinges with necessary screws excluding paneling, (which will be paid separately) ( Ist class kail wood)

Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm with wire of dia .0.63 mm for doors, windows and clerestory windows including I.S.I. marked black enameled M.S. butt hinges with necessary screws ( class kail wood.)

Providing and fixing hardware fittings of approved brand and of required type as approved by Engineer incharge. complete as per the specifications .

Tower bolts 100mm (windows)

Handle 125mm (window)

I-Hooks 150mm

L-drop ( Link Lock)250mm

Tower bolts 150mm (doors)

Handle 150mm (door)

Providing and fixing 4 mm thick of clear plain glass for fixed glazing panels/ shutters (only panel area to be measured) including cost of teak wood beadings of required size complete

Granite Work in Floors :- Providing and fixing ( gang saw cut mirror polished (flamed , pre-moulded and pre-polished), machine cut for flooring, steps ,risers of stairs etc.( flamed instaircase) of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding (of edges wherever required ) and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shape 18mm thick. and slab area over 0.50 sq m. (Note: The Granite stone slab shall be cut to required size and laid to the required pattern including rounding, chamfering, bull nosing of the edges as directed. Actual area of slab, as laid shall be measured) Sample to be approved by Engineer-in-charge. (including cost of all material, leads, lifts and carriages etc. upto site of work complete

Granite Work on Walls /Skirting :- Providing and fixing ( gang saw cut mirror polished (pre-moulded and pre-polished), machine cut on Walls /Skirting . of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding (of edges wherever required ) and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shape 18mm thick. and slab area over 0.50 sq m. (Note: The Granite stone slab shall be cut to required size and laid to the required pattern including rounding, chamfering, bull nosing of the edges as directed. Actual area of slab, as laid shall be measured) Sample to be approved by Engineer-in-charge. (including cost of all material, leads, lifts and carriages etc. upto site of work complete

Providing and fixing 1st quality Vitrified Double Charged tiles in floor/skirting etc. of standard thickness of approved make in all colours, shades, design and prints as approved by the engineer-in-charge over 12 mm thick bed of cement mortar 1 : 3 (1cement 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg per Sqm. Including pointing in white cement mixed with pigment of matching shade with all lead, lift, labour, materials, tools, plants complete as per specification and as directed by Engineer in Charge .

Providing and fixing ceramic glazed floor tiles 300x300 mm (Antiskid) (thickness to be specified by the manufactures) of Ist quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, ivory, grey, fume Red,brown laid on 20mm thick be bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete inluding carriage of material (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 13753 of miniumum thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. Sizeof Tile 450 x 300 mm. (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Providing and fixing Antiskid Vitrified pavement tiles 300x300x10mm thick laid on 20mm thick cement mortar 1:4 1 cement: 4 coarse sand] and jointing with Tile Grout as per approved colour complete as directed by Engineer-in-charge.

Providing and applying cement based wall putty of required thickness over plastered surface to prepare the surface even and smooth complete in specified areas as per specified patter. (Birla make) (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Providing & making of 2" POP Ornamental corner cornice including cost of all material and labour.

Wall/Ceiling painting with Plastic emulsion paint of aproved brand and manufacture two coats. Including applying one or more coats of cement primer Interior work.

Painting with synthetic enamel paint of approved brand and manufacture including applying priming coat with ready mix pink of approved brand and manufacture on wood work etc. including cost and carriage of all materials equipments complete job as per drawings, specifications and as directed by the engineer Incharge.

Touch wood two or more coats,on Wood work, imported panelling, for soffits etc including smoothening surface using sand paper. Complete.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with Armourcrete of M/s The Structural Water Proofing Company Pvt. Ltd. Or Tapecrete of M/s CICO Technologies Ltd. consisting of applying : First layer of slurry of cement @ 0.488 kg/Sqm mixed with Armourcrete or Tapecrete @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. Second layer of slurry of cement @ 0.242 kg/Sqm mixed with Armourcrete or Tapecrete @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes supply of waterproofing compound, preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry)

Providing and fixing M.S.Railing of required Pattern for hand railing etc.with M.S. flats ,square or round bars including priming coat with approved steel primer all complete.(Fixed to openings of mounty roofs etc. complete as per the directions of enginner incharge ( Ornamental )

Providing and fixing 75 x 60 mm moulded/ornamental hand rails in straight lenghts/curved in shape where required and approved by consultant completes for stair cases / verandas etc. Including al necessary fittings/fixtures (ist class deodar wood) as per direction engineer incharge

Pointing on brick work with lime Surkhi with 1:1 ( 1 lime : 1 Surkhi) lime Surkhi mortar on fair side of brick masonary /conceret walls up to floor VI level including finishing even and smooth to give a local heritage touch as per the directions of Consultant/Engineer incharge upto desired height complete in all respects. (Including all lead, lift, labour, materials, tools, plants complete as per specification and as directed by Engineer in Charge.) (Flush Pointing)

Providing and fixing dagi dewari as per local architectural heritage 100mm x 25mm wooden planks of ist class deodar wood fixed horizontally, vertically, inclined with necessary screws and other items

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.(Crushed)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required (Jaquar or Equivalent as Per Make List)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required(Jaquar or Equivalent as per Make List)

Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste coupling of standard pattern,including suitable Pedestal, painting of fittings and brackets, cutting and making good the walls wherever required. (Jaquar or Equivalent as Per Make List)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

Providing and fixing Urinal Partition/Division Plate.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (40 mm dia )

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing ( Rectangular shape 453x357 mm)

Providing and fixing toilet paper holder (Jaquar or Equivalent as Per Make List) CP Brass

Providing and fixing Soap Dispenser with Metallic Bottle.(Jaquar or Equivalent as Per Make List)

Providing and fixing water Jet Nozzle/ health foucet with hose pipe european water closet complete in all respect of approved quality(ALD 573)(Jaquar or Equivalent as Per Make List)

Providing and fixing CP brass towel rail complete with CP brackets fixed to wooden cleats with CP brass screws (Jaquar or Equivalent as Per Make List

Providing and fixing soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete including jointing. (75 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B(Astral/Supreme/Ajay Pipes)

110 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B(Astral/Supreme/Ajay Pipes)

160 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B(Astral/Supreme/Ajay Pipes)

Cutting chases in brick masonary walls for following diameter U-PVC pipes and making good the same with cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement: 4 coarse sand):160/110/75 mm diameter pipe

Concealed work, including cutting chases and making good the walls etc.

1620 (20 mm OD) pipe

2025 (25 mm OD) pipe

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.

2532 (32 mm OD) pipe

6350 (32 mm OD) pipe

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.(KITEC or Equivalent as Per Make List) 4050 (50 mm OD ) pipe

Providing and fixing Brass Float Valve with Ball of Approved Make for the following Sizes,for Water Supply to Overhead Tank (50 mm dia )

providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

25 mm nominal bore

32 mm nominal bore

50 mm nominal bore

Providing and fixing unplasticised PVC connection pipe with brass unions:45 cm length, 15 mm nominal bore

Constructing masonary chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cenment:5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design ( With F.P.s bricks)

Constructing masonary chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cenment:5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design (With F.P.s bricks)

Providing and filling sand of grading zone V or coarser grade all-round the G.I./CPVC pipes in external work & lay dry brick over sand layer to protect the pipe (50 mm Dia)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank.Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].(2000 Ltrs)Treated water Tank and Untreated water tank

Providing and fixing C.P brass bib cock of approved quality. (Jaquar or Equivalent as Per Make List) 15 MM NOMINAL BORE

Providing and fixing C.P. brass angle valve for basin mixer and geyser/cisterns points. (Jaquar or Equivalent as Per Make List) 15 MM NOMINAL BORE

Providing and fixing C.P. brass Wall Mixer (Jaquar or Equivalent as Per Make List) 15 MM NOMINAL BORE

Providing and fixing C.P. brass Basin Mixer 15 mm Nominal Bore .

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : ( 510X1040MM BOWL DEPTH 250MM)

Cutting holes upto 30x30 cm in walls including making good the same with common burnt clay F.P.S.(non modular) bricks

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof

Providing, laying And Jointing of U-PVC Pipe Type-B with cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round p.v.c pipes including bed concrete as per standard design:

110 mm diameter PVC PIPE

160 mm diameter PVC PIPE

Making soak pit 2.5 m diameter 3.0 metre deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design. With F.P.S. bricks

Constructing septic tank, of size 5.0mx2.5mx1.4m approx. height(dimensions &Height to be fixed as per site requirement i.e. below invert level of last manhole (1.5 m water depth) , in B/W, 350/230 mm thick ( minimum) walls and 400 mm

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil (Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m

Providing and fixing on wall 25 LTRS Electric Geyser with ABS Body. Jaquar or Equivalent as Per Make List

Supply,Installation,Testing and Commissioning of Water Dispenser / Water Cooler with an Inbuilt RO Water Purifier with Purification Capacity Up to 40 L/hr

M/S NASEER AHMAD BHAT