8402 SPECIAL REPAIRS TO BLDG No. NP-48 ORS MD ACCN (CONSIST OF 08 QTRS) AT AICTS PUNE UNDER GE SOUTH PUNE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non skid coloured ceramic tiles of size 600 x 600mm x 8 to 10mm thick of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over & including 20 mm thick screed bed in CM 1:6 as in flooring, complete all as specified and directed.

M&L for non skid coloured ceramic tiles of size 600 x 600mm x 8 to 10mm thick of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over & including 10 mm thick backing coat in CM 1:4 as in skirting including triangular filleting in CM 1:4 on top of skirting complete all as specified and directed.

M&L for non skid coloured ceramic tiles of size 300x300x7 to 8 mm thick of approved color, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 20 mm thick screed bed in CM 1:6 as in flooring, complete all as specified and directed.

M&L for glazed coloured digital printed ceramic tiles of size 300x600x 7 to 8mm thick in vertical surfaces etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including 10mm thick backing coat in CM (1:4) and filleting at top etc complete all as specified and directed.

Taking down chowkats or frames wooden/steel with shutters (w/o taking off shutters from frames) exc 1.5 Sqm and not exc 4 Sqm each including making good disturbed wall surfaces / jambs with cement plaster in 1:4 of thickness as required at site or disturbed masonry, if any, in PCC 1:3:6 type C-1 using 20mm graded stone aggregates finished even & smooth using extra cement complete all as specified and as directed.

S & F pressed steel frames for doors with one & more rebates with and including necessary fixing lugs, lock strike plate etc complete as specified size of frame 125mm x 60mm with and including mild steel hold fast 06 Nos, MS cold rolled 100mm size butt hinges welded to MS frame, PCC bed block (1:2:4) type B1 for hold fast and cement concrete 1:3:6 type C0 (Using 12.5mm graded stone aggregate) for filling in MS frame, complete all as specified and directed.

S & F pressed steel frames for doors with one & more rebates incl necessary fixing lugs,hinges,lock strike plate etc complete as specified size of frame 105 x 60mm incl MS hold fast, 3 Nos MS cold rolled 100mm size butt hinges welding to existing MS frame PCC bedblock (1:2:4) type B1 for hold fast and cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame complete all as specified and as directed.

Supply and fixing fiber glass reinforced plastic (FRP) door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

S & F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side including 35mm wide, 3mm thick 1st Class HW (TW) beading all around on edging of shutter, complete all as specified and directed.

S&F 35mm thick 2nd class glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

Supply and fixing 30mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge

S&F of 200mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and as directed.

S&F of 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and as directed.

S&F 300mm size mild steel sliding door bolts, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of six bolts and nuts for a bolt plate and two on staple plate complete all as specified and as directed.

S&F 100mm size mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F 125mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

S & F stainless steel wirecloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide including preparation of newly steel surfaces complete all as specified and as directed.

M & L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10 cm in width or girth not otherwise described complete all as specified and as directed.

Taking down chowkats or frames wooden / steel with shutters (without taking off guard bar from frames) not exc 1.5 Sqm each including making good disturbed wall surfaces / jambs with cement plaster in 1:4 of thickness as required at site or disturbed masonry, if any, in PCC 1:3:6 type C-1 using 20mm graded stone aggregates finished even & smooth using extra cement complete all as specified and as directed.

S & F solid PVC door frame of size 50mmx95mm made out of 5mm plain colour PVC sheet rainforced with MS tube suppling and fixing in opening complete all as per specification and drgs complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F 125mm size aluminium anodised handles, cast type, complete all as specified and as directed.

S&F of 100mm long stainless steel butt hinges medium weight and fixed complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for keys scrubbing down with water etc. complete all as specified and as directed.

M&L for dubbing out average 15mm thick on irregular face of walls in CM 1:6, complete all as specified and as directed.

M&L for rendering 10 mm thick cement plaster on dubbing out surfaces using CM 1:6 finished with sagol finish complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) on brick / concrete surfaces using water proofing compound as per manufacturers instruction finished with sponge finish complete all as specified and as directed. (Note :- Water proofing compound shall be measured and paid separately under respective items of BOQ.)

Supply only liquid water proofing chemical complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and as directed.

M&L for 2mm thick wall care putty on wall complete all as specified and as directed.

M&L for two coats of OBD on walls over a coat alkali resistance primer including preparation of new plaster surfaces / wall putty surfaces complete all as specified and as directed.

Demolition of cement concrete in any position and paving not exc 15cm thick (below or above roof slab) un-reinforced complete all as specified and as directed.

M&L for PCC type B1 1:2:4 (20mm graded aggregate) as in copings, bed plates, kerbs etc including necessary form work complete all as specified and as directed.

Dismantling AC corrugated/ semicorrugated sheets in roofing complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section in any position (unframed wok) etc complete all as specified and as directed.

Dismantling timber scantling under 40 Sqcm in section in any position( unframed wok) etc complete all as specified and as directed.

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and as directed.

Dismantling ceiling / boarding of any description, fixed in any position like partition etc with nails including frame work of timber complete all as specified and as directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600x600x 9 to 9.5mm thick in size, of approved brand / make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee & angle, hung from ceiling by using 2 mm dia G.I. suspension wires spacing @ 1200 mm c/c on main runners including making niches for fans / light complete all as specified and directed.

Demolition of brick work or stone / boulders masonry built in cement mortar complete all as specified and as directed.

M&L for Brick work with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in CM 1:6, complete all as specified and as directed.

M&L for 18/19mm thick prelaminated particle board both side decorative face including providing second class hard wood 6mm thick beading for edges of board alround complete all as specified and directed.

M&L for 12mm thick prelaminated particle board one side decorated choice laminated and other side balancing white lamination for replacment of panels of aluminium partition or panels of aluminium doors complete all as specified and as directed.

S & F continuous hinges MS bright finish or electro galvinised with of flaps 30mm complete all as specified and as directed.

S&F 100 mm brass fancy type cupboard handle fixed with nuts, screws and washer of brass polished complete all as specified and as directed.

S&F ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed.

S&F aluminium powder coated three track sliding window with two or more shutters with & including 4 mm thick tinted glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock etc using PVC beading etc using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved. fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes. (a) Frame bottom 20620 (b) Frame top & side 20681 (c) Shutters top & bottom 20844 (d) Shutter inter lock 20724 (e) Handle (Side ) for 20606 shutters

S & F ventilators /louvers using 5mm thick X 10CM wide plain / frosted glass and following aluminium powder coated sections and out side at fixed type wire mess conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :- (a) SP 20048 (b) Glazing clips 19352

Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix- ture of pigment to match with shade of granite laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for machine cut cudappah stone slab 20-25mm thick laid over and including 20 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

S&F in repairs of PVC valveless syphonic action type flusing cistern, low level star white with inlet ball valve float and handle including brackets Make : Sleek plus single flush of make :- Hindware (sleek) or equivalent of Cera/ Parryware complete all as specified and as directed.

S & F PVC connection 45 cm long 15 mm bore with 2 Nos PTMT check nuts complete all as specified and as directed.

S&F in repair of angular stop cock conforming to CAT No. 053 KN of "Jaquar" or of equivalent make specified here-in-after.

S&F in repair 15mm dia Bib tap, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white flat back size 550x400mm incl brackets, CP waste coupling, 32mm GI waste pipe upto nahani trap complete all as specified and as directed.

S&F 20mm dia anodised aluminium anodised tubular towel rails, D Type , 60cm long between flanges fixed complete all as specified and as directed.

S&F stainless steel soap dish of weight not less than 200 gms ISI mark complete all as specified and as directed.

S&F in repairs Chromium plated shower rose of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F stainless steel grating with / without waste hole complete all as spd and as directed.

S&F in repair water closet (Squating pattern) of vitreous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) incl connection to trap and flushing pipe and anti syphon pipe etc complete including trap set in and including provision of concrete for fixing pan complete all as specified and as directed.

Supply and fix in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, CP Brass waste coupling washers and waste pipe and fitting including bedding in cement mortar to dwarf wall or including fixing & providing cantilever brackets and connecting union to pipe, over all size of sink 1020 mm X 510 mm, bowl size 460 mm X 360 mm X 160 mm complete all as specified and as directed.

S&F stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 30"x32"x8"/10" and of approved quality of finish all as spd and directed and of ISI mark complete all as specified and as directed.

S&F in repairs 15mm dia chromium plated fancy type, pillar tap with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified and as directed.

S&F in repairs chromium plated brass stop cock fancy type (concealed type)screwed both ends high pressure for 15mm bore iron pipe or ferrule complete all as specified and as directed.

S&F CP waste coupling fitting 32/40mm bore suitable for WHB / sink complete all as specified and as directed.

S&F in repairs high density polyethylene and unplasticised PVC pipe 40mm blue in colour HDPE at pressure rating 6kgf / cm2 fixed complete to wall or floor incl bend tee elbow etc for waste pipe at wash basin / flush tank complete all as specifed and directed.

S&F PVC floor trap 75mm dia with grating including jointing with solvent cement complete all as specified and as directed.

Demolition and breaking of drain pipes AC /CI/PVC set in cement mortar or adhensive all as directed of 75 to 110 mm dia complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in trenches complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in trenches complete all as specified and as directed.

S&F PVC (SWR) bends with oval access door of 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) bends with oval access door of 75 mm bore complete all as specified and as directed.

S&F of 110mm PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fixed in repairs rotational moulded polyetylene water storage tanks (cylindrical vertical with closed top) of 500 Litres capacity hoisted and fixed in position and connecting up pipes including with ball valve complete set of PTMT, brass tank nipple of suitable size, securing access covers including dismantling old water tanks complete all as specified and directed

S&F in repairs 25mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs GI tubing tubes "medium grade" galvanized including with all fittings and fixtures complete, fixed to walls / concealed and ceiling or laid in floors in any position or location including taking down etc complete for the following sizes:-

15mm bore

20mm bore

25mm bore

S&F of 25 mm dia aluminium powder coated fancy type curtain rod, medium weight, complete all as specified and as directed.

S & F aluminium powder coated brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed.

S&F 150mm overall length of cover plate brass body door stopper and tongue with hard drawn steel spring complete all as specified and as directed.

M&L for providing cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate), 75 mm thick as in plinth protection finishing even and fair on top using extra cement with 6mm wide joints throughout the thickness of plinth protection filled with mastic filling comprising 1 part of mastic bitumen and 3 part of sand (all by weight) complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B1 (Using 20mm graded stone crushed aggregate) as in flooring etc complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors, laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floors and paving not exc 15cm thickness (below & above ground level) complete all as specified and as directed.

M&L for RCC 1:2:4 type B1(using 20mm graded curshed stone aggregate) as in beam, lintel band for gable wall etc complete all as specified and as directed.

M&L for TMT bar 10 mm dia and over cut to length, bent to shape required, including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410 complete all as specified and as directed.

M&L for TMT bar 6mm to 8mm dia cut to length, bent to shape required, including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410 complete all as specified and as directed.

All as per item No. 95.00 above but 6mm dia and over upto and including 10mm dia as in stirrups etc complete all as specified and as directed.

M&L for used and waste formwork to lintel & beams sides and soffits with rough finihed surface of concrete flat slabs such as roof slab, floor slabs and similar work, complete all as specified and as directed.

M&L for RCC pipes class NP-2 with socketed ends laid and jointed complete with rubber ring joints of 150mm dia complete all as specified and as directed.

M&L for RCC pipes class NP-2 with socketed ends laid and jointed complete with rubber ring joints of 200mm dia complete all as specified and as directed. (Note :- Laying of sewage line in running sewage water & temporary diversion /plugged of existing sewage line & bailing of sewage water is the responsibility of contractor and the rate for the same shall be deemed to be included in unit quoted rates)

M&L for PCC 1:4:8 type D2 using 40mm graded aggregate for 150mm pipe concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40mm graded aggregate as in bed to drain pipes including forming cradles for 250mm pipe complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as specified and as directed.

Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in manholes covers, set in CM 1:4 complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling in mass concrete etc. complete all as specified and as directed.

M&L for mild steel clamps, bands straps, supports or stays for soil waste pipe & rain water pipes including fixing clamps with coach screws etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

M&L for 2nd class hard wood wrought plain fillets square, rectangular or triangular in section clean sawn secured with screws, sectional area exc. 13 Sqcm but n. exc 25 Sqcm etc complete including dismantling of timber fillets in cabinet / cupboard frame complete all as specified and as directed.

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches, ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty, PVC casing caping including all accessories etc., heavy duty ISI marked,mild steel concealed sunken boxes, 1.6 mm thick and 60 mm depth with earth dolly duly painted with two coats of black bituminious paint over a coat of red oxide primer with laminated bakelite sheet of min thickness of 3mm suitable for switches/sockets, etc, including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for the following:- (Note :- Making good of disturbed surfaces will be done by contractor without any claims)

One light/fan/ point controlled by one switch and regulator

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

One bell/buzer point controlled by one bell push

All as per Ser. Item No. 111.00 above but with stranded copper 2.5 Sqmm (Nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin 15Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal aera) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

S&F ceiling rose PVC / polycarbonate isolated body 3 ways terminals, ISI marked complete all as specified and as directed.

Supply and fix switch piano flush button type 5 amps SP one way complete all as specified and as directed.

Supply and fix switch piano flush button type 15 amps SP one way complete all as specified and as directed.

S&F bell push, flush type, 5Amp, 240 volts complete all as specified and as directed.

S&F socket outlet multipurpose 2 in 1, 6Amp, 230 volts flush type complete all as specified and as directed.

S&F socket outlet multipurpose 2 in 1, 15 amps, 230 volts flush type complete all as specified and as directed.

Taking down ceiling fan of any size/sweep after disconnecting the wire from existing ceiling rose including refixing the same after cleaning dust, oiling, greasing, painting with two coats synthetic enamel paints and writing MES No. etc including providing flexible three core wire of size 23/0.0076 from ceiling rose to connector of fan complete all as directed by Engr-in-Charge.

S&F in repairs of ceiling fan regulator, electronic step type, delux, suitable for fan 48"/56" sweep complete all as specified and as directed.

M & L for submain wiring with two single core 4 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, in PVC conduit, including continuous PVC insulated one single core copper earth wire 4.0 Sqmm FRLS all as per IS 694/1990 including taking down existing submain wiring complete all as specified and as directed. (Note : 3 runs of 4 Sqmm cable and earth wire including one run of PVC conduit & accessories shall be measured as one length.)

S&F bell electrical ding dong including hardwood board bell push, flush type, 5 Amp, 240 volts complete all as specified and as directed.

S&F LED Light fitting1 x 20 Watt, 220 Volt made of aluminium extrusion housing with high efficient LEDs & opal diffuser, IP-20 rating connecting up with three core flexible copper conductor cable of suitable size from ceiling rose conforming to Halonix Cat part No.HLB-03-20-CW-AL or of equivalent in Philips / Havells complete all as specified and as directed.

S&F lamp holder (Angle / bracket) insulated body, with back plate for batten fittings complete all as specified and as directed.

Supply and fix PVC body exhaust fan, noise free, AC single phase 230/ 240 volts of size 250 mm sweep, RPM 1350 and all fixing arrangements complete all as directed by Engr-in-charge.

Supply and lay in trenches steel water tubing galvanised medium grade with all fittings of sizes 40 mm bore complete all as specified and as directed.

Supply and fix electronic meters tamperproof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and as directed. (Make : HPL / L&T or of equivalent specified here-in-after)

Design, supply,install, test and comissioning of free standing, wall mounted, dust, weather and vermin proof LT distribution board, outdoor type with 2.0 mm thick CRCA sheet for load bearing members and 1.6 mm thick for doors and covers and shall be painted with epoxy powder paint by means of electro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall consist of 200 Amps rating TPN bus bars of high conductivity aluminium alloy and shall be provided with colour coded heat shrinkable sleeves,with more depth. The panel shall be modular/cubical trype with bus chamber cable allyand provided with separate fully compartments for each switch including instrumentation such as Ampere Meter, Volt meter, Phase indicating lamp with double stud hinged door, front and rear openable with locking arrangement and suitable for 1100 Volts grade , 3 phase 415 Volts , 50 cycles , AC Supply and to with stand short circuit fault level of not less than 10 KA and degree of protection shall be IP 54. The distribution box shall be fixed on wall with 4 Nos anchor fastener etc. The following items are to be provided in the panel board :-

S&F MCB DB SPN 8 way ,double door, with 200 amp rated busbar 240 Volt, recess mounted all as specified and directed.

S&F MCB SPN 10 to 40Amps, 10KA, 'C' series, complete all as specified and directed.

S&F MCB SP 6-32 Amps,10KA,'C' series, complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode 60cmx60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr in deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level including connecting GI earth wire 4mm dia by GI nut, bolt, washers all as shown in electrical plate No. 3 of SSR Part I of 2009 including funnel for watering, PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in pit / chamber, RCC 1:2:4 type B0 using 12.5mm graded stone aggregates and 6mm dia mild steel bars at 100mm c/c as in chamber cover, charcoal, salt etc complete including excavation and earth work in any strata, test point and testing on completion including filling up the earth pit with black cotton soil for best result and removal of excavated material from site all as specified and directed by Engineer-in-charge. (Note : GI earthwire and GI protection pipe upto 7.5 mtr length shall be included in this item.)

Supply, laying, testing and commissioning of UG LT cables of size 25 Sqmm 4 core, 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS-1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/MCCB in bldg etc to suit the cable laid in trenches/ fixed to poles/drawn through pipes complete all as specified and as directed.

Supply and fixing Integral LED security Light Luminaire 25 W comprising of epoxy powder coated aluminium housing, enclosed with toughened glass cover in frame with and including 40mm GI pipe medium grade bracket of suitable size for fixing with fitting & fixtures, fixing on wall complete with accessories conforming to Cat Part No LR02-291-XXX-57XX of Wipro or of equivalent in Crompton LSTS-25-CDL-M or Halonix Cat Part No. HLSLD-09-25-CWL-R complete all as specified and directed.

Supply and Fix in replacement 4 pole MCCB, 100 Amps, rup Cap 25 KA, 415V, 50Hz complete all as specified and as directed.

M & L for submain wiring with two single core 4 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, in existing conduit, including continuous PVC insulated one single core copper earth wire 4.0 Sqmm FRLS all as per IS 694/1990 complete all as specified and as directed. (Note : 3 runs of 4 Sqmm cable and earth wire including one run of PVC conduit & accessories shall be measured as one length.)

S&F MCB DB SPN 2 way double door with 200 Amp rated 240V recess mounted with common earth complete all as specified and as directed.

S & F metal body exhaust fan, AC single phase, 240 V of size 450 mm sweep with louvers including necessary connection and flexible copper cable from ceiling rose complete all as specified and as directed. (Make : Almonard/ Crompton/ Havells/ Bajaj)

Ares Construction Company

REKHA ELECTRICALS

M/s.BAJRANG CONSTRUCTION

SARATH ENTERPRISES

Gauri Associates

Raj Construction Company

ANIL CONSTRUCTION CO.

R k construction

Agarwal Agencies