Renovation and Partition of Zone-3 Chairman Room

Amount

Dismantling exisisting Brick work in cement mortar 1;5 mix works including dismantling,clearing away and carefully stacking materials useful for re-use for any thickness of walls etc complete as per standard specification

Brick Work in CM 1:5 mix using country bricks 8 ¾ " x 4 ¼ " x 2 ¾" including cost and conveyance of materials and labour charges etc., complete as per standard specification.

Plastering with cement mortar 1:5 (One Cement, Five Sand) 12mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supplying and fixing in position best approved of BIS quality PVC Soil waste pipes having a pressure of 6 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Paving the floor with design Antiskid ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Suppy, delivery and fixing of European Water Closet with "P" or "S" Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 10 litre capacity PVC Low Level Flusing Tank with all internal fittings including all other labour charges etc complete

Supply and fixing of single box type 4'36 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting Sd 87

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.

Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings - 100 mm x 75 mm including all charges etc, complete as per standard specification.

Providing Wall cabinet in various depth at 0.3/0.45/0.6m deep wooden cub board with new one of size 1.05x2.15 m with top bottom and sides all round and for shutters using 18mm thick ply wood over that for shutter and sides all round finishing with 1mm thick laminated sheetand SEP two coats with one coat of primer for inner surfaces and back side of the cub board including labour for wrought and put-up in position with necessary hinges lock, handles and screws nails etc complete

Supplying and fixing in position of FALSE CEILING ARRANGEMENTS with aluminium anodised ' T' Section and 'L' angle frame work of grid size 60x60cm with aluminium T section and 'L' angel of size 25x25x2mm thick and the same is supported @ suitable intervals byadjustable type 6mm dia MS rod with suitable threaded nuts suspended rods hung from ceiling at 120cm c/c in both directions and fixing 60x60cmx20mm thick thermocole in the grid so as to give a seat to false ceiling including painting the 6mm dia MS rod etc.,complete complying with standard speificat- ions. Necessary opening and arrangementsfor fixing electrical fitings should be provided with suitable frame work etc., complete.

Wiring 2x1.5 (22/0.3) PVC insulated unsheathedSC Cu.Conductor of 1100 V grade in suitable PVC rigid pipe consealed in wall and ceiling with PVC accessories with TW switch box and 5 S FT switch in flush with wall with 3 mm hylum sheet cover for making good of the consealed portion with suitable colour for PVC consealed light point/fan point ( for electronic regalator) SD 24

Wiring 2x4sqmm (22/0.3) PVC insulated unsheathedSC Cu.Conductor of 1100 V grade in suitable PVC rigid pipe consealed in wall and ceiling with PVC accessories with flush with wall with 150x100x113mm TW switch box 3 mm hylum sheet for 15 A 3 pin non interlocking CS plug with continious earth connection of 14 SWTC wire and makaing good of the consealed portion with suitable colour for consealed power plug pint SD40

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5 A flush type switch on suitable MS box in flush with wall as per SD 135

Supply and fixing of LED 18 W ceiling fixture lumanaries Acrilic metalic fiiting condesor type with bulbs philps/havells/suriya including cost and conveyance of all materials and including all labour charges etc complete

Supply and fixing of 1200mm (48") sweep AC ceiling fan omplete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") SD-106

Supply and fixing of Designer type PVC box type exhaust fan 300 mm size with lover type finish and making cutting of window and maken wooden boxing work etc complete

Supply and fixing of 20 Amps DP plug and socket in sheet metal enclosure with 32 A DP MCB in flush with wall with earth connection ( For AC plug) as per SD 140

Supply and fixing of wooden door with frame . including cost and conveyance of all materials,with necessary hinges lock, handles and screws nails etc complete and all other labour charges etc.complete

Supplying and fixing best approved quality Brass C.P / Al anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications

Supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 X 450mm wth necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc., complete complying with standard specifications.

S/F in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in position with necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications.

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

L.Kishore Kumar