Work for Water Rejuvenation Project Including Ghat Redevelopment, Riverfront Development and Allied Infrastructure along the Kshipra River in Ujjain package 2

Providing and fixing of 70 mm thick machine rubbed stone flooring including stairs of ghat over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 coarse sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) admixed with pigment to match the shade of stone and pointing with same apoxy mortar.Red/White/Coloured Sand stone : The slabs of white, red and stones of other colours found at Mandana/Dholpur as per direction of Engineer-in-charge and at other places to be used in flooring work shall be hard, durable and tough, free from cracks, decays and weathering. In case of red sand stones and other coloured sand stones, white patches or streaks and in case of white sand stones, coloured patches or streaks shall not be allowed. Dressing of Slabs Every slab shall be cut to the required size and shape and chisel dressed on all sides to a minimum depth of 20 mm. The top and the Joints shall be fine tooled so that straight edge laid along the face is fully in contact with it. In case machine cut stones are used, chisel dressing and fine tooling of machine cut surface need not be done provided a straight edge laid anywhere along the machine cut surface is in contact with every point on it.In addition the dressed top and sides shall be table rubbed with coarse grade carborundum stone before paving, to obtain a perfectly true and smooth surface free from chisel marks.Dressing of Slabs. How ever, scattered spots upto 10mm diameter shall be permitted.The specifications for dressing the top surface and the sides. In addition the dressed top and sides shall be table rubbed with coarse grade carborundum stone before paving, to obtain a perfectly true and smooth surface free from chisel marks.Finish:Neat,durable,machine-rubbed,uniformshade,non-slippery.Rate inclusive of Stone supply,carriage,transportation,mortar,labour,curing,cleaning,royalty,T&P. Excluding pre finished nosing.Quantity and shade of Mandana or Dholpur stone will be as per direction of Engineer-in-charge. Excluding GST; including matching size, level and shade with existing flooring.

Refixing of Available (70-40 mm thick) machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 coarse sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) admixed with pigment to match the shade of stone and pointing with same apoxy mortar. Dressing of Slabs Every slab shall be cut to the required size and shape and chisel dressed on all sides to a minimum depth of 20 mm. The top and the Joints shall be fine tooled so that straight edge laid along the face is fully in contact with it. In case machine cut stones are used, chisel dressing and fine tooling of machine cut surface need not be done provided a straight edge laid anywhere along the machine cut surface is in contact with every point on it.In addition the dressed top and sides shall be table rubbed with coarse grade carborundum stone before paving, to obtain a perfectly true and smooth surface free from chisel marks.Dressing of Slabs. How ever, scattered spots upto 10mm diameter shall be permitted.The specifications for dressing the top surface and the sides. In addition the dressed top and sides shall be table rubbed with coarse grade carborundum stone before paving, to obtain a perfectly true and smooth surface free from chisel marks.Finish:Neat,durable,machine-rubbed,uniformshade,non-slippery.Rate inclusive of Stone supply,carriage,mortar,labour,curing,cleaning T&P. Excluding pre finished nosing.(Rates excluding Cost of Stone and GST); including matching size, level and shade with existing flooring.

Providing and fixing of 50 mm thick machine rubbed stone flooring including stairs of ghat over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 coarse sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) admixed with pigment to match the shade of stone and pointing with same apoxy mortar.Red/White/Coloured Sand stone : The slabs of white, red and stones of other colours found at Mandana/Dholpur as per direction of Engineer-in-charge and at other places to be used in flooring work shall be hard, durable and tough, free from cracks, decays and weathering. In case of red sand stones and other coloured sand stones, white patches or streaks and in case of white sand stones, coloured patches or streaks shall not be allowed. Dressing of Slabs Every slab shall be cut to the required size and shape and chisel dressed on all sides to a minimum depth of 20 mm. The top and the Joints shall be fine tooled so that straight edge laid along the face is fully in contact with it. In case machine cut stones are used, chisel dressing and fine tooling of machine cut surface need not be done provided a straight edge laid anywhere along the machine cut surface is in contact with every point on it.In addition the dressed top and sides shall be table rubbed with coarse grade carborundum stone before paving, to obtain a perfectly true and smooth surface free from chisel marks.Dressing of Slabs. How ever, scattered spots upto 10mm diameter shall be permitted.The specifications for dressing the top surface and the sides. In addition the dressed top and sides shall be table rubbed with coarse grade carborundum stone before paving, to obtain a perfectly true and smooth surface free from chisel marks.Finish:Neat,durable,machine-rubbed,uniformshade,non-slippery.Rate inclusive of Stone supply,carriage,transportation,mortar,labour,curing,cleaning,royalty,T&P. Excluding pre finished nosing.Quantity and shade of Mandana or Dholpur stone will be as per direction of Engineer-in-charge. Excluding GST; including matching size, level and shade with existing flooring.

Providing a uniformly bush-hammered, textured and non-slip finish to existing sound basalt/natural stone flooring in situ, using suitable hand-operated or mechanical bush-hammering equipment, including trial treatment on an approved sample panel, surface preparation, protection of adjacent stonework, removal of loose particles and dust, cleaning of the treated surface, and all labour, tools, equipment and incidentals required to complete the work as directed by the Engineer-in-Charge. The operation shall be carried out without dismantling the existing flooring and without causing cracking, spalling, loosening or damage to the stone slabs, joints or adjoining heritage fabric. The degree of texturing, uniformity, surface profile and final appearance shall be approved by the Engineer-in-Charge before execution.

Carving of sandstone up to 20 mm as approved by Engineer-in-charge and consultant, with specific quantity,design, Size,drawings upto any height, thickness, size with necessary scaffolding / centering / T&P etc complete and as per requirement of items and proportion of design. Stone Carving depth 10mm to 20mm varies as per design including 3-D carving work, sunk and moulding works, grooves, cornices etc works as per approved design drawings. All work shall be done in satisfactory manner and as per direction of engineer in charge and consultant. Rate Excluding cost of Stone supply.(For Carving work) Including Art & Relief Work, Carving Design will be as per direction of Engineer-in-charge. Excluding GST

Providing and fixing 50 mm thick red sandstone mural panels with carving depth up to 30 mm, of approved quality, colour, shade, size and design, at all required heights and locations, including supply of stone; cutting, dressing, shaping and edge finishing; preparation and execution of approved artwork; relief/3-D carving, sunk and moulded work, grooves and ornamental details, maintaining adequate residual stone thickness. Including minimum 12 mm thick cement mortar backing in proportion 1:3 (1 cement : 3 sand); stainless-steel cramps, anchors, pins and fasteners of required grade, size, strength and spacing; drilling and forming necessary holes and chases in the stone and supporting masonry/RCC; approved bonding agents/epoxy wherever required; and joint pointing in white cement mortar 1:2 (1 white cement : 2 marble dust), mixed with pigment matching the stone shade. Including surface cleaning, rubbing/polishing appropriate to the approved finish, and spray application of two coats of approved exterior-grade clear protective lacquer, allowing drying between coats in accordance with the manufacturer's instructions and approved sample. Rate includes scaffolding, centering and temporary supports, handling, carriage, transportation, royalty, labour, curing, tools, equipment, protection of adjoining work and final cleaning, complete as per approved drawings, artwork, samples and directions of the Engineer-in-Charge and consultant. Measurement shall be the actual installed face area in square metres, measured once, without additional allowance for carving depth, developed relief surface, joints, cutting or wastage. All specified materials and fixing accessories are included in the rate. Rate excludes GST.

Providing and fixing 70 mm thick red sandstone mural panels with carving depth up to 50 mm, of approved quality, colour, shade, size and design, at all required heights and locations, including supply of stone; cutting, dressing, shaping and edge finishing; preparation and execution of approved artwork; relief/3-D carving, sunk and moulded work, grooves and ornamental details, maintaining adequate residual stone thickness. Including minimum 12 mm thick cement mortar backing in proportion 1:3 (1 cement : 3 sand); stainless-steel cramps, anchors, pins and fasteners of required grade, size, strength and spacing; drilling and forming necessary holes and chases in the stone and supporting masonry/RCC; approved bonding agents/epoxy wherever required; and joint pointing in white cement mortar 1:2 (1 white cement : 2 marble dust), mixed with pigment matching the stone shade. Including surface cleaning, rubbing/polishing appropriate to the approved finish, and spray application of two coats of approved exterior-grade clear protective lacquer, allowing drying between coats in accordance with the manufacturer's instructions and approved sample. Rate includes scaffolding, centering and temporary supports, handling, carriage, transportation, royalty, labour, curing, tools, equipment, protection of adjoining work and final cleaning, complete as per approved drawings, artwork, samples and directions of the Engineer-in-Charge and consultant. Measurement shall be the actual installed face area in square metres, measured once, without additional allowance for carving depth, developed relief surface, joints, cutting or wastage. All specified materials and fixing accessories are included in the rate. Rate excludes GST.

Providing and fixing 100 mm thick red sandstone mural panels with carving depth up to 70 mm, of approved quality, colour, shade, size and design, at all required heights and locations, including supply of stone; cutting, dressing, shaping and edge finishing; preparation and execution of approved artwork; relief/3-D carving, sunk and moulded work, grooves and ornamental details, maintaining adequate residual stone thickness. Including minimum 12 mm thick cement mortar backing in proportion 1:3 (1 cement : 3 sand); stainless-steel cramps, anchors, pins and fasteners of required grade, size, strength and spacing; drilling and forming necessary holes and chases in the stone and supporting masonry/RCC; approved bonding agents/epoxy wherever required; and joint pointing in white cement mortar 1:2 (1 white cement : 2 marble dust), mixed with pigment matching the stone shade. Including surface cleaning, rubbing/polishing appropriate to the approved finish, and spray application of two coats of approved exterior-grade clear protective lacquer, allowing drying between coats in accordance with the manufacturer's instructions and approved sample. Rate includes scaffolding, centering and temporary supports, handling, carriage, transportation, royalty, labour, curing, tools, equipment, protection of adjoining work and final cleaning, complete as per approved drawings, artwork, samples and directions of the Engineer-in-Charge and consultant. Measurement shall be the actual installed face area in square metres, measured once, without additional allowance for carving depth, developed relief surface, joints, cutting or wastage. All specified materials and fixing accessories are included in the rate. Rate excludes GST.

Wall art work (3D Painting) at any Hight - Providing and painting 3D Painting including all material including Surface Preparaction , Base coat and and Top coat Finising coats of all requared shades,premium Acrylic Emulsion,and other required Paints and labour, tools, equipment and incidentals required to complete the work as directed by the Engineer-in-Charge

Wall art work (2D Painting) at any Hight - Providing and painting 2D Painting including all material including Surface Preparaction , Base coat and and Top coat Finising coats of all requared shades,premium Acrylic Emulsion,and other required Paints and labour, tools, equipment and incidentals required to complete the work as directed by the Engineer-in-Charge