WELCOME MAINT CERTAIN PERIODICAL SERVICES AND SUNKEN FLOORS JOINERIES CEILING PLUMBING ROOFING TILING ETC AT TRISHUL LINES MES COLONY UNDER AGE BR N NO II OF GE NORTH SECUNDERABAD

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) not exceeding 1.5 Sqm each complete all as directed and as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as directed and as specified.

Taking down shutters of any description not exceeding 1.0 sqm each complete all as directed and as specified.

Taking down shutters of any description exceeding 1.0 sqm & but not exceeding 2.0 sqm each complete all as directed and as specified.

S&F Steel windows with side hung double shutter (glazed shutter open out side and wire mesh shutter open inside) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as directed and as specified.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as directed and as specified.

S&F pressed steel frame of size 165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as directed and as specified.

S&F pressed steel frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as directed and as specified.

M&L for Cement concrete type B1, 1:2:4(20mm graded aggregate) as in bed plates, kerbs, copings, filling of hallow portion of MS frames etc including necessary form work complete all as directed and as specified.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty/beads in square not exceeding 0.5 Sqm in each pane complete all as directed and as specified.

S&F 3mm thick figured glass, pin headed type and glazing with oil putty/beads in squares not exceeding 0.5 sqm in each pane complete all as directed and as specified.

S & F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with stainless steel wire staples complete all as directed and as specified.

M&L for Brickwork with fly ash bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 as in walls etc including demolition of brick work built in cement mortar complete all as directed and as specified.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed and as specified.

M & L for rendering 15 mm thick on brickwork or concrete surfaces in CM 1:6 and finished fair and even and smooth without using extra cement in narrow widths complete all as directed and as specified.

M & L for three coats of white wash on newly plastered surface of walls including preparation of surface complete all as directed and as specified.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and complete all as directed and as specified.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions complete all as directed and as specified.

S & F 35mm thick, 2nd class hardwood glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) complete all as directed and as specified.

S&F 30mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides complete all as directed and as specified.

S&F 25mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides complete all as directed and as specified.

M&L for applying two coats of synthetic enamelled paint over steel and iron surfaces of any description, not other wise described over 10 cm width or girth including preparation of new surfaces and one coat of red oxide primer complete all as directed and as specified.

S&F framed work such as grills framed guard bars etc with end of bars shouldered riveted or angle into spikes framed guard bars ,and similar work conforming to grade Fe 290-0 Gde -E -165 complete all as directed and as specified.

M&L for preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as directed and as specified.

S&F 300mm long mild steel sliding door bolt, plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of six bolts and nuts four on bolt plate and two on stapple plate etc., complete all as directed and as specified.

S&F 200mm long MS barrel tower bolt, stove enamelled black with bright bolts complete all as directed and as specified. Make:- Crown/Swastik or equivalent as approved by GE

S&F 100mm long MS butt hinges, medium weight cold rolled complete all as directed and as specified. Make:- Crown/Swastik or equivalent as approved by GE

S&F 150mm long MS pressed handles oval type stove enamelled black complete all as directed and as specified. Make:- Crown/Swastik or equivalent as approved by GE

S & F in repairs 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete all as directed and as specified. Make:- Crown/Swastik or equivalent as approved by GE

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as directed and as specified.

S & F stainless steel butt hinges 100mm long with stainless steel hinge pin complete all as directed and as specified.

S & F 150mm long extruded aluminium alloy handles fabricated type anodised complete all as directed and as specified.

M/L for preparing the old decorated surfaces of walls and applying one coat of white wash complete all as directed and as specified.

All as per item No 33 but as on ceillings complete all as directed and as specified.

M &L for prepering old decorative surfaces of walls and applying one coat of colour washing complete all as directed and as specified.

M & L for preparing old distemper surfaces on walls by washing rubbing down and stopping of old distempered surfaces and applying one coat of distemper oil emulsion of any colour complete all as directed and as specified.

Demolition of concrete of any discription and in any position in sunken floors complete all as directed and as specified.

M & L for application of one coat of water based bitumen emulision primer @ 0.3 lit per sqm including cleaning of surface thoroughly from dust & dirt and laying water proofing treatment with polymetric memberane 3 Kg/ sqm standard consisting of 90 micron, HMHDPE torch on memberane over a coat of blown bitumen 85/25 @ 1.2 Kg/sqm on top of memberane and providing 25 mm thick sand cushioning to recieve lean concrete in sunken floor complete all as directed and as specified.

M & L rendering 15mm thick in CM (1:3) on fair faces of brick/concrete surfaces of sunken floors, including taking down extg plaster and mixing of water proofing compound, finished even and fair complete all as directed and as specified. NOTE: WPC will be measured and paid separately.

M&L for PCC (1:7:12) type F2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as directed and is specified.

M&L for PCC 1:2:4 type B0 12.5 mm stone aggregate of avg 25 mm thick make to slope in sunken floors/ floors complete all as directed and as specified.

S & F in repairs 32 mm dia GI pipe medium grade in short lengths for spouts including cutting holes in walls and making good with CM (1:3) complete all as directed and as specified.

Dismantling of stone slabs & tiles of any description of thickness laid dry and pointed in any mortar, in floors, aprons etc complete all as directed and as specified.

M & L for 20mm to 25 mm thick machine cut polished Cuddapah stone slabs in cooking platform, shelfs etc laid over 15 mm thick cm (1.4) screed including jointed and pointed in grey cement slurry mixed with pigment to match the shade of the slab complete all as directed and as specified.

M & L for 15 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors and including taking down etc steel tubing and connections complete all as directed and as specified.

M & L for 20 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors and including taking down old steel tubing and connections complete all as directed and as specified.

M & L for 40mm thick plain cement concrete 1:2:4, Type B1 (using 20mm graded stone aggregate) as in floors and finished even and smooth with using extra cement complete all as directed and as specified.

Demolition and breaking up drain pipes (salt glazed ware/stone AC or Reinforced concrete) set in cement mortar 100mm dia complete all as directed and as specified.

All as per item No 48 above but 150mm bore complete all as directed and as specified.

S & F RCC Class NP 2, 100 mm bore pipes laid and jointed complete with collars complete all as directed and as specified.

S & F RCC Class NP 2, 150 mm bore pipes laid and jointed complete with collars complete all as directed and as specified.

Dismantling wall floor or hearth tiling including cement mortar bedding but not backing and rubbish off the premises complete all as directed and as specified.

M & L for screed bed 15mm thick for laying floor finishes in CM 1:6 complete all as directed and as specified.

M & L for rendering 10mm thick in CM 1:4 on brick on concrete surface as backing coat of tiles complete all as directed and as specified.

M & L for coloured non skid ceramic tiles 300x300x7 to 8mm thick (square/rectangular) area of each tiles exc 0.6 Sqm but n.exc .11 Sqm in floors etc set and jointed in near cement slurry and pointed in coloured cement to match complete all as directed and as specified.

M & L coloured galzed ceramic tiles 300x200x7mm thick on vertical surfaces set and jointed neat cement slurry and pointed in coloured cement to match complete all as directed and as specified.

Taking out existing unserviceable water closet, squatting pan of any size and supply & fix vitreous China squatting pan ‘Orissa’ pattern, size 580 X 440 mm white, integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, PCC 1:3:6 type C2 bedding etc, complete including making good to floor to match with adjoining surfaces complete all as directed and as specified.

Taking out existing unserviceable water closed, pedestal pattern of any size and supply & fix vitreous China wash down water closed pan (pedestal Pattern) white including fixing bolts and making good to floor to match with adjoining surfaces complete all as directed and as specified.

S & F in replacement of 10 Ltrs capacity PVC valveless flushing cistern, low level, white, with inlet ball valve, float and handle inc brackets, including flush pipe of PVC 32 mm dia for low level cistern complete all as directed and as specified.

S & F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as directed and as specified.

S & F PVC (SWR) bends any radius 75mm bore provided with access door complete all as directed and as specified.

All as per item Ser No 61 above but 110mm bore complete all as directed and as specified.

S & F 110 mm bore PVC (SWR) vent cowl complete all as directed and as specified.

S & F PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls laid in/floor, 75mm bore complete all as directed and as specified.

S & F PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls/ laid in floor, 110mm bore complete all as directed and as specified.

S&F 15mm dia Bib tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms) complete all as directed and as specified.

S&F for Pillars taps of PTMT any colour in screwd for iron pipe and fixed 15 mm dia fixed in repairs (Min weight 110 gms) complete all as directed and as specified.

S&F in repairs for Stop valve of PTMT 15mm bore any colour in screwed for iron pipe complete all as directed and as specified.

S & F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as directed and as specified.

M&L for two coats of distemper over chalk whitining including 3 mm wall care putty on walls complete removal of existing treatment on wall surfaces complete all as directed and as specified.

M & L for preparing old decorated surfaces of walls/bands /slabs and applying one coat of weather proof paint of any colour complete all as directed and as specified.

M & L for preparation of old painted wooden surfaces over 10 cm width or girth and applying coat of synthetic enamel paint complete all as directed and as specified.

M & L for preparation of old painted steel and iron surfaces of any description over 10 cm width or girth and applying coat of synthetic enamel paint complete all as directed and as specified.

M & L for rendering 5 mm thick on ceillings in CM (1:3) and finishing surface even and smooth without using cement etc in patches, area not exceeding 3 sqm in each patch complete all as directed and as specified.

M & L for preparing new plastered or unplastered ceiling surfaces and applying three coats of white wash on ceilings complete all as directed and as specified.

S & F 150 mm long Hasp & stapple mild steel stove enamelled black including bolt to hinge plate and fixed with screws complete all as directed and as specified.

S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs including dismantling of old water tank of any description complete all as directed and as specified.

S&Fin repairs 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as directed and as specified.

S&F in repairs 25 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as directed and as specified.

S&F in repairs for PVC flush pipe (low level band) 32 mm dia for low level flush tank (High density) of standard make suitable for EWC complete all as directed and as specified.

M & L in repairs for 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as directed and as specified.

Dismantling of AC corrugated as semi corrugated sheet in roof coverings complete all as directed and as specified.

M&L for Pre painted galvalume aluminium zinc coating GI based corrugated /trepezoidal steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

M&L for Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in ridges fixed with self tapping screws complete all as specified and as directed.

S&F in repairs sinks with drain board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes incl bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as directed and as specified.

M&L in repairs vitrous china wash hand basin, white, flat back size 550x 400 mm fixed in repairs including waste pipe, (hope of bore 32mm) waste coupling brakets, etc complete all as directed and as specified.

M & L in repairs for low density / flexible waste pipe of 40mm dia for working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts 90 cm long suitable steel sink waste complete all as directed and as specified.

M & L in reapairs for low density / flexible waste pipe of 32mm dia working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts 75 cm long suitable for WHB/URINAL complete all as directed and as specified.

M & L in repairs for Low density waste pipe 40 mm dia for working pressure rating 6 Kg/Sqcm including necessasary fittings complete all as directed and as specified.

S&F in repairs 100 mm waste coupling for sinks of any pattern complete all as directed and as specified.

S&F in repairs for 15mm bore, 45 cm long PTMT PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends complete all as directed and as specified.

S&F in repairs for Stop valves, cast copper alloy, chromium plated ,with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for 15 mm dia bore iron pipe or for unions complete all as directed and as specified.

S&F in repairs for Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for unions complete all as directed and as specified.

S&Fin repairs for Stops valves, cast copper alloy, chromium plated fancy type with capstan head screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions complete all as directed and as specified.

S&F in repairs for Pillar taps, cast copper ally, with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for 15 mm dia bore iron pipe complete all as directed and as specified.

S&F in repairs for Bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down, screwed for 15 mm dia bore iron pipe complete all as directed and as specified.

S&F in repairs for Bib taps cast copper alloy with crutch handle, screwed down and screwed for 15 mm bore iron pipe fixed complete all as directed and as specified.

M & L in repairs for Brass chromium plated, angle cock, screwed fo 15 mm bore iron pipe complete all as directed and as specified.

M & L in repairs for 125 mm dia brass chromium plated shower rose with swivel joints complete all as directed and as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and as directed.

S&F for structural steel work for rolled sections as in main and cross beams, hips and jack rafters, purlins, running rails and guides for sliding doors, fixed with angle cleats or other connecting plates gde Fe-410-W, complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

Pragathi Infrastructure Co.

MAHALAKSHMI INFRA PROJECTS

M/s D.Krishna Varma

M/s GM Constructions

VENKATA PRABHAVATHI CONSTRUCTIONS

A SOMA RAJU

DIVYA GARDENS

Srinivasa Consructions

Sri Associates

BHATNAGAR ASSOCIATES