Loading
Loading…
Loading…
Tender Value
₹79.5 L
EMD Value
₹1.6 L
Closing Date
18 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER ELG
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.(In this connection scanned copy of Annexure VIB duly filled up must be attached with offer).
The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender .Other terms and conditions shall follow of GCC, April 2022. Definition of Similar nature of work has given below (1.1)
Defination of Similar Work :- Definition of Similar nature of work :- As per CEE's letter No. EL/112/0/KM, dated 22.08.2013 : Item Sl. 2.2 under "LT Electrical Works" : Supply , erection, testing and commissioning of electrical wiring in residential quarters/Railway Stations/Service building/High bay Sheds etc. / Supply, erection, testing and commissioning of tubular poles/Octagonal poles and Luminaries including erection of rail poles in streets/yards, washing lines & circulating area with or without timer.OR Sl 5.1 under "Works of Air- conditioning system" : "Supply, installation, testing and commissioning of window/Split Air- Conditioner/Package type/Water Coolers/Bottle Coolers/Deep Freezer/Refrigerators with or without AMC".
13 conditions · 4 needing a document upload
Scanned copy of valid GST (Goods & Service Tax)Registration Certificate.
The following documents should be attached with the tender ( Annexure-V (A) certificate is to be given by attorney/authorized signatory/each member of Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. & Scanned copy POA/Partnership deed is to be uploaded Duly filled up by the bidder
Partnership deeds, power of Attorney etc. (if any) : The tender shall clearly specify whether the tender is submitted on his own or on behalf of a partnership concern. If the tender is submitted on behalf of partnership concern he should submit the certified copy of the partnership deed along with the tender authorisation to sign the documents on behalf of the partnership firm. If these documents are not enclosed along with the tender document, the tender will be treated as hearing lease submitted by the individual signing the tender documents. The Railway will not consider any power of Attorney granted by the tender or any changes in the composition of the firm made subsequent to the execution of the contract. It may however recognize such power of Attorney and change after obtaining proper legal advice, the cost of which will be chargeable to the contract.(Scanned copy POA/Partnership deed is to be uploaded Duly filled up by the bidder. As per clause no. 14(e) of GCC'22, the following documents to be uploaded in terms of Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.
Scanned copy of valid Trade license or Propitorship Certificate.
List of the Works completed in the last three financial years giving description of work. Organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and date of payment and final value of contract should also be given. (Supportive documents/ certificates from the organization with whom worked/are working should be enclosed) (Please attach scanned copy of Annexure-I duly filled up).
List of works in hand indicating Supportive documents/certificates from the organization with whom worked/are working should be enclosed) description of work, contract value, approximate value of balance work yet to be done and date of award. (Supportive documents/certificates form the organization with whom worked/are working should be enclosed).(Please attach scanned copy of Annexure-IV duly filled up)
Railway Officers Associated with tenderer:RAILWAY OFFICERS ASSOCIATED WITH TENDERER 1. ExRailway Officer as tenderer: Should tenderer be a retired Gazetted Officer working before his retirement on any of the Railways owned and administered by the President of India, or should the tenderer being partnership firm have as one of its partners a retired Gazetted Officer as aforesaid, or should the tenderer being an incorporated company have any such retired Officer as one of its Directors, or should the tenderer have in his employment any retired Gazetted Officer as aforesaid, full information of such person shall be submitted along with his tender in the format given in annexure-VI to this chapter of this tender document. (Authority: ACS No.3 to GCC July,2014vide Boards letter No.2014/CEI/CT/O/9/RET dt.22.01.2015)(please attach scanned copy of Annexure-VI duly filled up by the firm).
Option for receiving payment through Letter of Credit . (Please attach scannedcopy of ANNEXURE 1 LC & ANNEXURE 2 LC duly filled up by the firm if optedfor)
The following documents should be attached with the tender: (i)Scanned copy of Pan Card. (ii)Scanned Copy of EFTMANDATE FORM Duly filled up by the bidder(iii)Tender Document (duly digitally signed by the bidder)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Submission of Documents in support of Eligibility Criteria : All documents in support of fulfillment of eligibility criteria with respect to completion of 'Similar Nature of work for technical Eligibility criteria 'and 'Total Contract value for Financial Eligibility Criteria' should be uploaded online in the website with scanned copy at the time of tender bidding with the details. No post - tender communication , in any form will be made or entertained , after opening of tenders in this regard .Railways may however call for the originals of the credentials for verification or any clarifications/Confirmations on the contents of the documents submitted .Eligibility of tenderers shall be decided solely on the basis of the documents submitted alongwith the tender offers and any subsequent document whatsoever submitted in this connection would not be given any cognizance on any account.
The Contractor/(firm) must go through the entire tender document along with all attachment for any kind of guidance regarding execution of the job & payment there after. In case any thing is left out or not clear then they should consult the General Condition of Contract & standard Specification as attached (uploaded ).The bidders are also advised to preserve a copy of entire tender document/ (Set) for their convenience.
Electrical (General) work in connection with "Major up-gradation of building facade including massive repair of building roof, wall, boundary walls & roof leakage & remodeling of offices of Eastern Railway HQ buildings (Fairlie Place & Old KG)".
EL-HWH-25-21--3560
EL-HWH-25-21--3560
Open
Works - General
180 Days
Howrah, West Bengal
₹0
₹1.6 L
18 Mar 2026
23 Feb 2026
4 Mar 2026
185 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 79,45,476 | ||
| — | — | — | 42,048 | ||
| Wiring of Light / Fan / Call Bell / Glow Sign point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 144.00 | — | — | |
| — | — | — | 4,890 | ||
| Wiring of 6A / 3 pin Plug board consisting with one plug socket and one 6A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 30.00 | — | — | |
| — | — | — | 3,850 | ||
| Wiring of 6/16A 3 pin Plug board consisting with one 16/6A 3 pin plug socket and one 16A switch by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq. mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 10.00 | — | — | |
| — | — | — | 15,960 | ||
| Wiring of Multi Plug Board point by two nos. single core HRFR / FRLS grade PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with HRFR / FRLS grade PVC insulated, copper ECC of size 1.5 sq.mm, 1100V grade and each PVC multi plug board consisting of 4 nos. 6A/3 pin plug socket, 4 nos. 6A switch and 1 no. 10A MCB ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 40.00 | — | — | |
| — | — | — | 11,360 | ||
| Wiring of Multi Plug board consisting with three nos. 6/16A 3 pin plug socket, three nos. 6A switch, one no. 6/16A 3 pin plug socket, one no. 16A switch, one no. 10A fuse kit-kat / MCB and one indicator ( Red ) by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 20.00 | — | — | |
| — | — | — | 11,560 | ||
| Supply of Multi Plug Board consisting with four nos. 6A /5 pin plug socket, four nos. 6A switch with one no.10 A MCB by two nos.single core, HRFR /FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq. mm. for phase and neutral alongwith one no.single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm. for Earth continuity Conductor. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 20.00 | — | — | |
| — | — | — | 68,000 | ||
| Wiring of Submain by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cableof size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 1000.00 | — | — | |
| — | — | — | 49,600 | ||
| Wiring of Main line by two nos. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 6.0 sq. mm., 1100V grade for phase and neutral in PVC conduit / casing along with one no. single core, HRFR/FRLSgrade, PVC insulated, copper conductor cable of size 4.0 sq. mm., 1100V grade for Earth Continuity conductor ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 400.00 | — | — | |
| — | — | — | 92,800 | ||
| Wiring of Mainline by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 10 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 400.00 | — | — | |
| — | — | — | 1,50,000 | ||
| Wiring of Mainline by 4 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 10 sq.mm, 1100V grade for 03 phases and 01 neutral in PVC conduit / casing along with 01 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 200.00 | — | — | |
| — | — | — | 16,104 | ||
| Extra cost for conceal wiring in respect to PVC conduit / casing for light, fan, plug, power plug, multi-plug point etc. including make good of wall surface as its original condition. | — | 264.00 | — | — | |
| — | — | — | 38,000 | ||
| Extra cost for conceal wiring for main / submain with respect to PVC conduit / casing including make good of wall surface as its original condition. | — | 2000.00 | — | — | |
| — | — | — | 50,372 | ||
| Extra cost involvement for modular switch, bell push, plug socket, fan regulator, USB point, TV socket etc. with other accessories ( Make of Modular switch, socket, box, cover plate etc. - ABB / Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) ) | — | 514.00 | — | — | |
| — | — | — | 2,298 | ||
| Wiring of AC Machine ( Window / Split ) / Water Cooler point by 2 nos. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) and each switch board comprising with one power unit which includes one double pole MCB, one single phase starter and one 6/16A 3 pin socket and plug with indicating light and all other associated work. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 2.00 | — | — | |
| — | — | — | 74,400 | ||
| Wiring of Light point by 2 nos. single core HRFR /FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral in GI conduit of suitable dia along with 1 no. single core HRFR / FRLS grade,PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 600.00 | — | — | |
| — | — | — | 2,17,500 | ||
| Wiring of Light/Fan/Call Bell/Glow Sign point by 2 nos. single core HRFR/FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for phase and neutral in Gl conduit along with 1 no. single core HRFR /FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 1500.00 | — | — | |
| — | — | — | 1,22,400 | ||
| Wiring of Light point by 4 nos. single core HRFR /FRLS grade, PVC insulated, copper conductor cable of size 2.5 sq.mm, 1100V grade for three phases and one neutral in GI conduit of suitable dia along with 1no. single core HRFR /FRLS grade, PVC insulated, copper conductor cable of size1.5 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ). ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 800.00 | — | — | |
| — | — | — | 25,000 | ||
| Wiring of light point by 4 nos. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4 sq. mm. for three phases and one neutral in GI conduit of 25mm dia. along with one no. single core, HRFR / FRLS grade, PVC insulated, copper cond-uctor cable of size 2.5 sq.mm for Earth Continuity Conductor (ECC) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 50.00 | — | — | |
| — | — | — | 1,07,800 | ||
| Wiring of Main line by 4 nos. single core HRFR/FRLS grade, PVC insulated, copper conductor cable of size 16 sq.mm, 1100V grade for phase and neutral in PVC conduit / casing along with 1 no. single core HRFR / FRLS grade, PVC insulated, copper conductor cable of size 6 sq.mm, 1100V grade for Earth Continuity Conductor ( ECC ) ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 100.00 | — | — | |
| — | — | — | 4,432 | ||
| Dismantling of old wiring including light, fan, call bell, plug, power plug, sub-main and main of different offices | — | 16.00 | — | — | |
| — | — | — | 17,400 | ||
| Dismantling of old light fittings and fixing, connection and commissioning of new LED light fittings on High Mast Tower / Pole / Structure /surface with suitable arrangement including transportation of old light fittings from site to stores. | — | 200.00 | — | — | |
| — | — | — | 9,620 | ||
| Fixing, connection, testing and commissioning of indoor LED luminaire fittings with suitable arrangement ( LED indoor light fitting will be supplied by Railway ) | — | 130.00 | — | — | |
| — | — | — | 4,680 | ||
| Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps made of GI flat of size 40 mm x 6 mm and GI nut-bolts on structure / wall ( LED Street light fitting will be supplied by Railway ) | — | 20.00 | — | — | |
| — | — | — | 1,920 | ||
| Dismantling of old ceiling fan with accessories including transportation of dismantalted fan from site to stores. | — | 40.00 | — | — | |
| — | — | — | 520 | ||
| Fixing, connection and commissioning of Ceiling Fan with GI clamps made of GI flat of suitable size and GI nut-bolts & 'S' hook etc. ( Ceiling Fan will be supplied by Railway ) | — | 10.00 | — | — | |
| — | — | — | 3,680 | ||
| Supply of Down rod made of heavy gauge GI pipe of size 20 mm dia for suspension of ceiling fan ( Make - TATA / Jindal / Bansal ) | — | 20.00 | — | — | |
| — | — | — | 660 | ||
| Fixing, connection and commissioning of AC Exhaust Fan with suitable size and shape GI clamps / GI nut and bolts including necessary masonry work ( AC Exhaust Fan will be supplied by Railway ) | — | 4.00 | — | — | |
| — | — | — | 38,404 | ||
| Supply of SPN MCB DB ( Metal Enclosure with Metal Door - IP 43 ), 1Ph, 50Hz, 240V, 14 way complete with 10 nos. SP MCB of current rating from 6A to 32A, 10 KA, 240 Volt, 50 Hz as per requirement of load and one no. DP RCBO of current rating 63A, 300mA, 10 kA, 230V, 50Hz ( Make of MCB, RCBO and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S / Havells ) | — | 4.00 | — | — | |
| — | — | — | 456 | ||
| Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement | — | 4.00 | — | — | |
| — | — | — | 55,066 | ||
| Supply of Vertical TPN DB with MCCB Incomer (Metal Enclosure with Metal Door - IP43), 3Ph, 50Hz, 415V, 8 way per phase, 415V, 50Hz, complete with total 24 nos. SP MCB of current rating from 6A to 32A, 10 KA, 240 Volt, 50 Hz per phase as per requirement of load and one no. MCCB, 4 Pole, ( 40 - 100 )Amp, 415V, 50Hz, 36kA, Microprocessor based release ( Ics = 100% Icu ) with following features :- 1) Adjustable Over Load, 2) Adjustable Short Circuit, 3) Inbuilt ground fault protection, 4) Inbuilt Instantaneous protection 5) Adjustable neutral overload protection, 6) Provision of Thermal Memory 7) All Microprocessor protection-based MCCB / ACB must have facility of individual 'LSIG' fault indication with internal wiring. ( Make of MCB, MCCB and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) | — | 1.00 | — | — | |
| — | — | — | 2,753 | ||
| Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding , cable socketing and connection with all suitable arrangement | — | 1.00 | — | — | |
| — | — | — | 31,796 | ||
| Supply of TPN MCB DB ( Heavy duty, Outdoor type, UV ray protected, self fire- extinguishing and resistant to abnormal heat and fire up to 650 degree C GWT,shock resistance IK09 and IP65 degree of protection grade transparent DB box, similar to ABB Mistral65 - 20 Modules or equivalent ), 3Ph, 50Hz, 415V, 4 way per phase, 415V, 50Hz,complete with total 12 nos. SP MCB of current rating from 6A to 32A, 10 kA, 240 Volt, 50Hz per phase as per requirement of load and one no. FP RCBO 63A, 300mA, 10 kA, 415V, 50Hz, Suitable for AC + Pulsating DC (Type A) + Harmonics ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) | — | 2.00 | — | — | |
| — | — | — | 274 | ||
| Fixing, connection and commissioning of above TPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement | — | 2.00 | — | — | |
| — | — | — | 13,150 | ||
| Supply of MCB DP, 40/63A, 1Ph, 240V, 50 Hz, 10kA with ABS distribution box enclosure (IP-65) with polycarbonate transparent openable window including fixing, connection, testing and commissioning ( Make of MCB - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S and Metal Enclosure Board - Grasp / OBO Bettermann / ABB / Schneider ) | — | 10.00 | — | — | |
| — | — | — | 3,27,844 | ||
| "Supply of LT Wall Mounted/ Floor Mounted Double Door Cubical Outdoor type Distribution Panel Board made of 14 SWG ( 2mm ) MS sheet duly powder comprising with the following items for 100KVA to 125 KVA Load and all Microprocessor protection-based MCCB / ACB must have facility of individual 'LSIG' fault indication: a) MCCB, 4Pole, ( 40 - 160 )Amp, 415V,50Hz, 36kA, Microprocessor based release for O/L, S/C, E/F & Neutral protection similar to LK (L&T) Model :- DZ1-160D40-160 A, iTRP3, CAT No. -DZ1F0160DXH1A or equivalent - 2 nos. b) MCCB, 4 Pole, ( 25 - 100)Amp, 415V, 50Hz, 36kA, Microprocessor based release for O/L, S/C, E/F & Neutral protection similar to LK (L&T) Model :- DZ1-160D 25-100 A, iTRP3, CAT No. - DZ1F0100DXH1A or equivalent - 4 nos. c) MCCB, 4 Pole, 160 Amp, 415V, 50Hz, 36kA, without protection release, used as bus coupler isolation similar to LK (L&T) Model :- DN0 -160SD -160 A, CAT No.- CM90717OOMO or equivalent - 1 no. d) RCBO, 4 Pole, 32 Amp, 415V, 50Hz, 10kA, ""Sensitivities - 300 mA , Suitable for AC + Pulsating DC (Type A) + Harmonics - 2 nos. e) RCBO, 4 Pole, 63 Amp, 415V, 50Hz, 10kA, ""Sensitivities - 300 mA , Suitable for AC + Pulsating DC (Type A) + Harmonics - 4 nos. f) Tinned Copper Busbar (4 Bar) each of capacity 300 Amps., 415V, 50 Hz. - 1 set. g) Static Multifunction panel mounting Energy Meter suitable for operation on 3Ph,415V, 50Hz supply, Accuracy CL1 and RS485 Communication port similar to LK (L&T) Model :- MFM 4410, CAT No.- WL441011OOOO or equivalent - 6 nos. h) CT of suitable ratio forMFM - 18 nos. i) LED indication lamp for 3-Phases for incoming feeders and ""ON, OFF & TRIP""indication for all incoming and outgoing feeders - 38 nos. j) Petty Store for control cable, MCBs, gland, socket, fuse, push button,TNC switch, selector switch, rotary handle operating mechanism, spreader terminals, interlocking arrangement, auxiliary contacts, shunt release, terminal blocks & NO/NC relays etc.- 1 job. k) Fabrication work for above panel including internal wiring - 1 job." ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) ( Make for Energy Meter - ABB / Schneider / Secure / Legrand / LK (L&T) / Genus / Conzerv / Elmeasure / Stelmec / HPL / Socomec / Anchor / C&S ) | — | 1.00 | — | — | |
| — | — | — | 16,393 | ||
| Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories. | — | 1.00 | — | — | |
| — | — | — | 16,840 | ||
| "Supply of Outdoor pillar box type control panel board made of 14 SWG ( 2mm ) MS sheet duly powder coated comprising with the following : a) MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V AC, 50Hz ( Ics = 100% Icu ) suitable for release range 25-32A, 4 Pole - 1 no. b) Astronomical Timer Switch - 2 nos. c) Power Contactor, 3 Pole, 18A, 415V, 50 Hz - 2 nos. d) LED indication lamp for 3-Phases for incoming feeders and ""ON, OFF, TRIP "" indication for all incoming and outgoing feeders - 10 nos. complete with fabrication, internal wiring by single core copper conductor cable and all other accessories for above panel" ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) | — | 1.00 | — | — | |
| — | — | — | 839 | ||
| Fixing, connection, testing and commissioning of above panel including all incoming and outgoing cables glanding, cable socketing and connection and construction of concrete foundation or suitable wall hanging arrangement as per site condition with all associated accessories. | — | 1.00 | — | — | |
| — | — | — | 12,160 | ||
| Trenching and laying of cable under ground by soil cutting with covering of cable through suitable dia HDPE pipe including supply of HDPE pipe (PE-100 grade, PN-10 or higher) alongwith refiling of trench by excavated soil and make good of surface as its original condition. ( Cable will be supplied by Railway ) | — | 80.00 | — | — | |
| — | — | — | 15,200 | ||
| Drawing of cable on wall / structure with suitable size and shape GI clamps including supply of suitable size GI Clamp and GI nut- bolts and commissioning of cable ( Cable will be supplied by Railway ) | — | 380.00 | — | — | |
| — | — | — | 14,060 | ||
| Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable through 80mm dia GI pipe including supply of GI pipe alongwith make good of floor surface as its original condition after laying of cable ( Cable will be supplied by Railway ) | — | 20.00 | — | — | |
| — | — | — | 5,190 | ||
| Drawing of cable through one no. 2" dia, 3.0 Mtrs. long GI pipe ( Make - Tata / Jindal / Bansal ) for protection of cable on pole with proper GI clamps and GI nuts & bolts including supply of GI pipe ( Cable will be supplied by Railway ) | — | 6.00 | — | — | |
| — | — | — | 2,70,000 | ||
| Supply, installation, testing and commissioning of exterior rated Architectural LED RGBW flood lighting luminaire suitable for facade lighting with Die-cast aluminum housing, powder- coated finish Clear toughened glass of minimum 3mm thickness, Total System wattage in between 100W to 80W with system lumen output should be more than 3043 lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have surface mount base and constant locking hinges for simple position control from various angles without special tools. Fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C, Operating Humidity : 10%-90% and complete luminaire shall be IP66 and IK07 rated. Connectors should have IP67 male / female connectors. LED Lifetime shall be at least L70B50 @ 50000 burning hours at 25°C. LED should be with ceramic package of make philips, Nichia, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage 240 Vac, 50Hz with power factor is greater than 0.9, THD should be less than 10%. Built in Surge protection : DM 4kV CM 6KV. The luminary to be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5):2013, IEC 60598-1:2014, IEC 60598-1:2014/AMD1:2017, IEC 60598-2-5:2015, IEC TR 62778:2014 (for LED chips) standards. and shall be complete with all necessary accessories required for proper working of fixture including weatherproof connection cables, waterproof connectors etc. as required. ( Make of LED RGBW flood lighting luminaire : Philips (Signify) / Panasonic / Havells / Lighting Technologies / Canara Lighting ) | — | 4.00 | — | — | |
| — | — | — | 2,34,000 | ||
| Supply, installation, testing and commissioning of exterior rated Architectural LED RGBW flood lighting luminaire suitable for facade lighting with Die-cast aluminum housing, powder- coated finish Clear toughened glass of minimum 3mm thickness, Total System wattage in between 50W to 60W with system lumen output should be more than 2447 lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have surface mount base and constant locking hinges for simple position control from various angles without special tools. Fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C, Operating Humidity : 10%-90% and complete luminaire shall be IP66 and IK07 rated. Connectors should have IP67 male / female connectors. LED Lifetime shall be at least L70B50 @ 50000 burning hours at 25°C. LED should be with ceramic package of make philips, Nichia, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage 240 Vac, 50Hz with power factor is greater than 0.9, THD should be less than 10%. Built in Surge protection : DM 4kV CM 6KV. The luminary to be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5):2013, IEC 60598-1:2014, IEC 60598-1:2014/ AMD1:2017, IEC 60598-2-5:2015, IEC TR 62778:2014 (for LED chips) standards. and shall be complete with all necessary accessories required for proper working of fixture including weatherproof connection cables, waterproof connectors etc as required. ( Make of LED RGBW flood lighting luminaire : Philips (Signify) / Panasonic / Havells / Lighting Technologies / Canara Lighting ) | — | 6.00 | — | — | |
| — | — | — | 3,51,120 | ||
| Supply, installation, testing and commissioning of exterior rated Architectural LED RGBW Linear lighting luminaire suitable for facade lighting with Die-cast aluminum housing, powder- coated finish Clear toughened glass of minimum 3mm thickness, Total System wattage in between 20W to 30W with system lumen output should be more than 800 lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have surface mount base and constant locking hinges for simple position control from various angles without special tools. Fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C, Operating Humidity : 10%-90% and complete luminaire shall be IP66 and IK07 rated. Connectors should have IP67 male / female connectors. LED Lifetime shall be at least L70B50 @ 50000 burning hours at 25°C. LED should be with ceramic package of make philips, Nichia, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. Luminaire shall be complete with integrated /separate non-integral power supply BIS IP 66/67 potted driver and capable of operating at line voltage 240 Vac, 50Hz with power factor is greater than 0.9, THD should be less than 10%. Built in Surge protection : DM 4kV CM 6KV. The luminary to be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5):2013, IEC 60598-1:2014, IEC 60598- 1:2014/AMD1:2017, IEC 60598-2-5:2015, IEC TR 62778:2014 (for LED chips) standards. and shall be complete with all necessary accessories required for proper working of fixture including weatherproof connection cables, waterproof connectors etc as required. ( Make of LED RGBW Linear lighting luminaire : Philips (Signify) / Panasonic / Havells / Lighting Technologies / Canara Lighting ) | — | 28.00 | — | — | |
| — | — | — | 5,29,696 | ||
| Supply of High quality long through multi color linear wash light, Protection Rating : IP65, complying to BIS standard IS 10322 (Part 5/Sec 1) : 2012, and having CE certification against standard EN 61547 : 2009, EN 60598-1:2015, and EN 61347-2- 13 : 2014 Mounting Structure : Additional wall mount yoke arrangements for fixing the lights. Rotation view : Inbuilt body rotating angle in degrees for uniform rotation angle to get the desired effect. Power consumption : 80W, CCT : RGBW, (as per the design approval) Beam Angle 25°/45°/60°, Control : DmX512/ON/OFF, Channel : 4 CH, Body : Die casted / extruded aluminium, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : AC 110-230V, 50Hz or DC12/24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV ( Additional if required will be added as per the requirement ) Glare : Specially designed glare free round shape 360 deg / 3 unit. Focusing area / LED will be kept 90 Deg perpendicular below the glare free optic. Size of the LED optic & glare unit must be equal or +/- 2% higher to achieve the maximum intensity and less glare. This additional arrangement can be fixed or removed on the application. Glare free optical design for human viewing angle from a distance within 2-3 Mtr. Toughened transparent glass sealed above the glare free unit. Painting : 7 tank processed chemical treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0° C to 50°C, lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade with total protection class of IP 65. Luminaire is inclusive of Integral male / female waterproof connectors, driver, accessories for fixing ( nut, bolt, clamps etc. ) with structures in prewired conditions as per IS. Light testing standard should be LM79, LED Driver, IP65 or higher, IK05 or higher etc., LED Chip Makes should be CREE, NICHIA, LUMILEDS, OSRAM, AVAGO, SEOUL, PHILIPS. including installation, testing and commissioning. ( Make of LED RGBW Linear lighting luminaire : Philips (Signify) / Panasonic / Havells / Lighting Technologies / Canara Lighting ) | — | 32.00 | — | — | |
| — | — | — | 41,800 | ||
| Supply, installation, testing and commissioning of surface mounted, exterior-rated LED linear strip light with 70 W to 55W / 5m roll with 450lm/m luminaire with all the necessary accessories as below that is designed for grazing architectural lighting applications waterproof and anti-dust LED strips. It shall be sealed with Glue-injected with polyurethane (PU). SDCM<5 and suitable for RGB lighting, Robust Design & IP67 or higher rating for outdoor use. The luminaire shall be able to deliver minimum 19lx at 8.2 ft from luminaire with a beam width of <30ft in horizontal and < 30ft in vertical plane, it should comply with cone diagram. The luminaire peak intensity shall be minimum 262Cd. Luminaire has input voltage 24VDC, Operating temperature -40°C to 50°C, IP68 & IK06 protection, Lumen maintenance of 30,000 hrs @ L50 at 35°C. (1 no. = 5 m length) with IP67 connector for connecting the RGB LED strip. ( Make of LED RGB Linear Strip light luminaire : Philips (Signify) / Panasonic / Havells / Lighting Technologies / Canara Lighting ) | — | 8.00 | — | — | |
| — | — | — | 95,000 | ||
| Supply, installation, testing and commissioning of DMX Controller for the system including all other accessories required for the running of the system Controller should have Input Power 5-5.5V DC 0.6A and Output Protocol DMX512 with 4 universe, 2 universe should work in Stand Alone Mode and 2 universe should work in live mode with laptop/ tablet / computer. The universe should be expandable from 2 to 4 DMX512 universes. It should be compatible for Programmability with PC, Mac, Tablet, Smartphone by using USB & amp: Ethernet .DMX controller should have network controllability feature to control the scene remotely through LAN and triggered via UDP packets on port 2430. Its must have Connections Type C USB, XLR3, Ethernet, battery. There should be provision for Memory microSD card. Device should have Intuitive backlit keyboard with 10 presets and also have provision of keypad on device for changing scene manually from device. Device should be capable to work on Extended triggering possibilities (TCA) & also have Smart Upgrade Technology (SUT). It is an IP 20 unit and has an Operating temperature of 0°C to 50°C. weight should not be more than 120g. OS Requirements for the controller is Mac OS X 10.8-10.12, Windows 7/8/10. Standards should be EC, EMC, ROHS. The controller should have a variety of features including 2048 DMX channels, clock/calendar, iPhone/iPad/Android remote control, Ethernet facilities, dry contact port triggering and multi-zone SD card memory. Network synchronization of one area across hundreds of universes with the possibility of 99 scenes across 5 areas with auto clock triggering for sunrise and sunset and as per the festivals for specific occasions.Device should be equipped with meta; clamp to mount on wall. All Dynamic LED lighting fixtures & controllers shall be of same make to avoid integration, synchronization, and maintenance issues in future. To be provided with IP 66 enclosure if installed in external environment. ( Make of DMX Controller : Philips (Signify) / Panasonic / Havells / Lighting Technologies / Canara Lighting ) | — | 1.00 | — | — | |
| — | — | — | 22,154 | ||
| Supply, installation, testing and commissioning of DMX Splitter with Input Voltage range 190-240V AC, Power Consumption 5W max. Housing is made of CRCA with powder coated finish Mounting, 19-inch rack mountable, Operation Temperature -30°C to +55°C, 8 Output with 3 pin XLR terminal sockets, Ingress Protection Rating IP20. This unit takes the DMX Signal from DMX Controller & split the signal into 8 separate output channels. The output terminals of Splitters are optically isolated from the input. Splitters should be capable to amplify the DMX signal & allowing the data link to be extended by max. 300 m (1044 ft.) using AWG 22 DMX cable or 150 m (500 ft.) using AWG 24 DMX DMX cable or maximum 20-25 fixture per output channel. To be provided with IP enclosure if installed in external environment. DMX SPLITTER (INK) ( Make of DMX Splitter : Philips (Signify) / Panasonic / Havells / Lighting Technologies / Canara Lighting ) | — | 1.00 | — | — | |
| — | — | — | 6,364 | ||
| Supply of Power Driver for above lights, POWER : 200W, INPUT : AC 110-240V AC, 50Hz, OUTPUT : DC 24V, Protection rating IP66,Constant Voltage (C.V.) + Constant Current (C.C.) output, High efficiency up to 93%, Working temperature ( case temperature ) -45 to +45°C, Protections : Short circuit / Over current / Over voltage / Over temperature, Comply with harmonic current limit per EN61000-3-2 Class C (>/=50% load), Meet 4kV surge immunity level including installation, testing and commissioning. | — | 1.00 | — | — | |
| — | — | — | 39,200 | ||
| Supply of PVC insulated multi core electrical un-armored flexible 3 C x 1.5 Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V including installation, connection testing and commissioning. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 400.00 | — | — | |
| — | — | — | 66,000 | ||
| Supply of PVC insulated multi core electrical un-armored flexible 3 C x 2.5 Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V including installation, connection testing and commissioning. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 400.00 | — | — | |
| — | — | — | 75,000 | ||
| Supply of 5 core DMX cable comprises twisted pairs with shield support for carrying of data. DMX512 cable is used for connecting all light consoles that use DMX 512 standard data transmission including installation, testing and commissioning. | — | 500.00 | — | — | |
| — | — | — | 19,640 | ||
| Supply of IP65 5 pin XLR Male connectors having 5 pole cable connector, Male / Female connector with improved latch, cage type contacts, "solder stop" for easy soldering, and additional ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability incliding installation, testing and commissioning. | — | 40.00 | — | — | |
| — | — | — | 3,928 | ||
| Supply of IP65 5 pin XLR Female connectors having 5 pole cable connector, Male / Female connector with improved latch, cage type contacts, "solder stop" for easy soldering, and additional ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability including installation, testing and commissioning. | — | 8.00 | — | — | |
| — | — | — | 75,300 | ||
| Supply, installation and commissioning of different size and suitable width self- illuminated LED display system with all necessary accessories : 1) Aluminium panel - 3mm Pvdf coated aluminium composite panel.(Make-Alstone/Aludecor/Alstom/ Timexbond ) Designed artwork by ER shall be on router cut 3D alphabets of 2" depth to be flushed with the ACP sheet. 2) 1" X 1" 18g MS square pipe structure with red oxide and white enamel paint, ISI marked. 3) Imported translucent Acrylic sheet for making alphabets : a) Physical form - Sheets b) Thickness range - 3mm (+/-) 0.5mm c) Colour - White mild translucent d) Outdoor Stability - UV Stabilised e) Output - Excellent to cast Vinyl and self display f) Make - acast / Mitsubishi / sumiplex 4) 26g Galvanised iron sheet / 3mm acp for back panel. ( Make - Tata / Jindal / Bansal ) 5) Light Emit- -ting Diodes ( LED ) sign modules - ( Make of LED chip - NICHIA/ CRE / OSRAM/ SEOUL/ PHILIPS/ LUMILEDS/ AVAGO ) a) Power consumption - 1 W each module b) Operating Temperature - (-) 40 deg to 60 deg C c) Viewing Angle - 150 degree d) Input Voltage - 12V DC e) Protection Class inbuilt - IP 66 or higher f) Standards - UL94HB g) Certifications - UL. CE. C tick. ROHS h) Housing material of the module - PC & ROHS compliant i) Colour - White / Red / Warm white 6) Power Drivers -( Make-Union / Meanwell or similar ) a) Protection Class - IP 65 b)Rated Supply Voltage - 108V - 305V AC c) Fre- -quency - 50/60 Hz d) Power Factor - greater than 0.9 e) Driver Output current - .8A to 25 Ampere f) Operating Temperature - (-) 40 deg to 60 deg C g) Output Voltage Tolerance -10% | — | 100.00 | — | — | |
| — | — | — | 37,488 | ||
| Supply of Maintenance Free Copper Bonded Solid Earthing Rods with 25 kg Earth Enhance Compound with below specifications : a) Certified by CPRI and NABL Accredaited Lab b) ROHS certified c) Low Carbon High Tensile Rod d) Length of Electrode 3000 mm (3 Meter) e) Rod dia 17.2 mm f) Molecular Copper Plating thickness 254 microns as per UL 467 g) Connection terminal size 32 mm x 6 mm with 10 mm hole along with nut bolt and washer including installation, testing and commissioning as per RDSO spec. no. RDSO/SPN/197 ver. 1.0 or latest and conforming to RDSO Drg. No. SDO/RDSO/E&B/001 or latest. ( Make : ABB / VTR / Raychem / Veraizen Earthing / Ennob / True Power Ltd. / OBO Bettermann ) | — | 4.00 | — | — | |
| — | — | — | 2,636 | ||
| Supply of Heavy Duty Fiber Reinforced Polymers Pit Cover with below specifications : a) Weight Carrying Capacity 5 Ton b) Lockable arrangement c) Top Dia 162 mm d) Bottom Dia 242 mm e) Height 230 mm f) As per IEC 62561-5 g) M5 Nut Bolts HDG 4.6, 30 mm length with 2 nos. of plain washer h) Tested by NABL Accrediated LAB including installation, testing and commissioning. ( Make : ABB / VTR / Raychem / Veraizen Earthing / Ennob / True Power Ltd. / OBO Bettermann ) | — | 4.00 | — | — | |
| — | — | — | 14,922 | ||
| Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by 25 mm X 4 mm Galvanized Iron ( GI ) strip. ( For details not covered in this specifications, Indian Standard Code of Practice for earthing IS : 3043 - 1987, Reaffirmed - 1996 should be followed ) | — | 6.00 | — | — | |
| — | — | — | 12,40,624 | ||
| Supply, Installation, Testing & Commissioning of Hi efficient Top / Side Discharge Modular Type VRF Outdoor units with following capacity having heating & cooling operation ( BMS compatible, Web monitoring option), comprising Inverter Compressor ( R-410A refri- -gerent gas) . All the units shall be provided with micro processor based control for sequential starting of condensing units, advance refrigerant control , Liquid back flow protection, precise oil control technology, 3 Ph DC motor condenser fan motor ( External Static Pressure should be not less than 82 Pa ), Anti Corrosion Treatment Design, various electrical protection like-phase sequence, high/low voltage protection, compressor overload protection, fan & compressor temparature protection & pressure protection. The Outdoor unit also having blue fins with 4 face heat exchanger & capable to run stably even in 52 Deg C. (1 HP = 1 Set) ( Make : O General / Fujitsu-General / Mitsubishi Electric / Panasonic / Samsung / Carrier / Toshiba / LG / Hitachi / Trane / Voltas ) | — | 56.00 | — | — | |
| — | — | — | 3,00,136 | ||
| Supply of Indoor units with capacity 10.0 HP Ceiling Suspended In-the-Ceiling Duct Type Indoor Unit with following Specification : i) IDU Power supply- AC 1 Ph, 230V/50Hz., ii) Nominal Cooling Capacity- 28.0/KW, iii) Nominal Heating Capacity- 31.5/KW, iv) Maximum Sound Pressure Level- 64 db, v) Maximum Air Flow Rate- 3400 CFM with Multi speed motor, coil section with DX coil. The Indoor Unit Should be fire retardent, i.e the electronic PCB of the Indoor unit should be enclosed in sheet metal box, by which fire will not spread in case of fire including installation, testing and commissioning. ( Make : O General / Fujitsu-General / Mitsubishi Electric / Panasonic / Samsung / Carrier / Toshiba / LG / Hitachi / Trane / Voltas ) | — | 4.00 | — | — | |
| — | — | — | 1,37,530 | ||
| Supply of Indoor units with capacity 8.0 HP Ceiling Suspended In-the-Ceiling Duct Type Indoor Unit with following Specification : i) IDU Power supply - AC 1 Ph, 230V/50Hz., ii) Nominal Cooling Capacity - 22.4/KW, iii) Nominal Heating Capacity- 25.0/KW, iv) Maximum Sound Pressure Level - 62 db, v) Maximum Air Flow Rate- 3000 CFM with Multi speed motor, coil section with DX coil. The Indoor Unit Should be fire retardent, i.e the electronic PCB of the Indoor unit should be enclosed in sheet metal box, by which fire will not spread in case of fire including installation, testing and commissioning. ( Make : O General / Fujitsu-General / Mitsubishi Electric / Panasonic / Samsung / Carrier / Toshiba / LG / Hitachi / Trane / Voltas ) | — | 2.00 | — | — | |
| — | — | — | 42,300 | ||
| Supply of Refrigerant distribution joints for taking branches between one outdoor and various indoor units Y-joints & Piping Connection Kit, Complete with insulation including installation, testing and commissioning | — | 9.00 | — | — | |
| — | — | — | 92,250 | ||
| Supply of Refrigerant distribution joints for taking branches between two outdoors units Y-joints & Piping Connection Kit, Complete with insulation including installation, testing and commissioning | — | 9.00 | — | — | |
| — | — | — | 1,38,500 | ||
| Supply of Touch screen central control unit with 7 days programmable timer for automatic switch over between two independent refrigerent circuit comprising of indoor and outdoor units and capable of controlling 64 remote controller indoor units including installation, testing and commissioning ( Make : O General / Fujitsu-General / Mitsubishi Electric / Panasonic / Samsung / Carrier / Toshiba / LG / Hitachi / Trane / Voltas ) | — | 1.00 | — | — | |
| — | — | — | 6,360 | ||
| Supply of Rigid PVC Drain Piping of 40 mm dia complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation including Installation, testing and commissioning. | — | 40.00 | — | — | |
| — | — | — | 6,960 | ||
| Supply of Rigid PVC Drain Piping of 32 mm dia complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation including Installation, testing and commissioning. | — | 60.00 | — | — | |
| — | — | — | 7,140 | ||
| Supply of Rigid PVC Drain Piping of 25 mm dia complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation including Installation, testing and commissioning. | — | 70.00 | — | — | |
| — | — | — | 78,400 | ||
| Supply, fixing, connection and commissioning of control cum distribution wiring of Copper conductor cable of size 2C X 1.5 Sq. mm along with conduit for looping between indoor & outdoor VRF system and to main Central remote controller system. ( Make of Copper conductor cable - Anchor / KDK / Havells / Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 700.00 | — | — | |
| — | — | — | 57,540 | ||
| Supply, Testing, Commisioning and Trial run of the entire VRF system including nitrogen Flusing, charging of R 410A Refrigerant Gas for Topping UP, Including Pressure testing and Vacumising etc, as per direction and satisfaction of the Incharge. | — | 70.00 | — | — | |
| — | — | — | 14,500 | ||
| Supply, fabrication and installation of MS Frame duly painted for outdoor units including vibration isolation pad etc. | — | 100.00 | — | — | |
| — | — | — | 21,250 | ||
| Supply, installation, testing and commissioning of Interconnecting refrigerant pipe work with 44.5 OD with 19mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units, all piping inside the room shall be properly supported with MS hanger. ( Make : Rajco / Mandev / Royku ) | — | 10.00 | — | — | |
| — | — | — | 44,050 | ||
| Supply, installation, testing and commissioning of Interconnecting refrigerant pipe work with 38.1 OD with 19mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units, all piping inside the room shall be properly supported with MS hanger. ( Make : Rajco / Mandev / Royku ) | — | 25.00 | — | — | |
| — | — | — | 55,920 | ||
| Supply, installation, testing and commissioning of Interconnecting refrigerant pipe work with 31.7 OD with 19mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units, all piping inside the room shall be properly supported with MS hanger. ( Make : Rajco / Mandev / Royku ) | — | 40.00 | — | — | |
| — | — | — | 58,240 | ||
| Supply, installation, testing and commissioning of Interconnecting refrigerant pipe work with 28.6 OD with 19mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units, all piping inside the room shall be properly supported with MS hanger. ( Make : Rajco / Mandev / Royku ) | — | 70.00 | — | — | |
| — | — | — | 32,520 | ||
| "Supply, installation, testing and commissioning of Interconnecting refrigerant pipe work with 22.2mm OD with 19mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units, all piping inside the room shall be properly supported with MS hanger. ( Make : Rajco / Mandev / Royku )" | — | 60.00 | — | — | |
| — | — | — | 43,120 | ||
| "Supply, installation, testing and commissioning of Interconnecting refrigerant pipe work with 19.05mm OD with 19mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units, all piping inside the room shall be properly supported with MS hanger. ( Make : Rajco / Mandev / Royku )" | — | 80.00 | — | — | |
| — | — | — | 62,640 | ||
| "Supply, installation, testing and commissioning of Interconnecting refrigerant pipe work with 15.8mm OD with 13mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units, all piping inside the room shall be properly supported with MS hanger. ( Make : Rajco / Mandev / Royku )" | — | 120.00 | — | — | |
| — | — | — | 34,100 | ||
| "Supply, installation, testing and commissioning of Interconnecting refrigerant pipe work with 12.7 mm OD with 13mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units, all piping inside the room shall be properly supported with MS hanger. ( Make : Rajco / Mandev / Royku )" | — | 100.00 | — | — | |
| — | — | — | 40,350 | ||
| "Supply, installation, testing and commissioning of Interconnecting refrigerant pipe work with 9.52 mm OD with 13mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units, all piping inside the room shall be properly supported with MS hanger. ( Make : Rajco / Mandev / Royku )" | — | 150.00 | — | — | |
| — | — | — | 11,300 | ||
| "Supply, installation, testing and commissioning of Interconnecting refrigerant pipe work with 6.35 mm OD with 13mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units, all piping inside the room shall be properly supported with MS hanger. ( Make : Rajco / Mandev / Royku )" | — | 50.00 | — | — | |
| — | — | — | 36,280 | ||
| Supply, Erection, Smoke Testing of 120GSM GI Factory Fabricated / Site Fabricated - Rectangular / Round/ Elliptical Duct as per aesthetic look & duct will be spary paint with supports and turning vanes as per specifications & drawings. 0.8 mm (22G) thick. ( GI Duct Make : SAIL / TATA / JINDAL. Factory Fabricated Duct make : GP Spria / Asawa ) | — | 40.00 | — | — | |
| — | — | — | 72,000 | ||
| Supply, Erection, Smoke Testing of 120GSM GI Factory Fabricated / Site Fabricated - Rectangular / Round/ Elliptical Duct as per aesthetic look & duct will be spary paint with supports and turning vanes as per specifications & drawings. 0.63 mm (24G) thick. ( GI Duct Make : SAIL / TATA / JINDAL. Factory Fabricated Duct make : GP Spria / Asawa ) | — | 75.00 | — | — | |
| — | — | — | 45,252 | ||
| Supply, fixing, testing and commssiooning of GI Fusible link fire dampers in supply air duct / main branch as and where required with all accessories. The damper shall also be closed in the event of fire complete as required and as per specifications and atleast 90 minutes rating. ( Make : System Air / Green Air / Air Enterprise ) | — | 6.00 | — | — | |
| — | — | — | 11,460 | ||
| Supply and Installation of fire retardant flexible double canvass connections between duct and AC Machine. | — | 6.00 | — | — | |
| — | — | — | 1,03,530 | ||
| Supply and Installation of extruded aluminium powder coated supply air grills & diffuser with VCD and other fittings/accessories as per the specification ( Make : System Air / Dynacraft / Air Enterprise ). | — | 10.00 | — | — | |
| — | — | — | 1,21,095 | ||
| Supply and Installation of extruded aluminium powder coated supply air grills & diffuser without VCD and other fittings/accessories as per the specification ( Make : System Air / Dynacraft / Air Enterprise ). | — | 15.00 | — | — | |
| — | — | — | 43,760 | ||
| Supply and installation of thermal duct insulation of 19mm thickness with fire retardant (Class : O) AL foil faced closed nitrile rubber insulation on duct with necessary pasting. ( Make : Acoflex / Araflex / Supreme / K-flex ). | — | 40.00 | — | — | |
| — | — | — | 36,000 | ||
| Supply and installation of Acoustic lining of duct of 9mm thick Open cell Nitrile rubber sheet insulation (Class-1) with necessary pasting by good quality adhisive. ( Make : Acoflex / Araflex / Supreme / K-flex ) | — | 30.00 | — | — | |
| — | — | — | 1,01,880 | ||
| Supply, installation, testing and commissioning of G.I Slotted Tray for hard copper piping for the safety of nytrile insulations over copper pipe. ( Size 150mm x 50mm x 1.5mm ) | — | 360.00 | — | — | |
| — | — | — | 54,940 | ||
| Supply and providing drop ceiling to cover the indoor units & supply air duct, with 3mm thick ACP sheet as per manufacturer's specification on the frame work fabricated from Aluminium hollow rectangular section of size 50mm x 25mm (2mm thick) & duly suspended by Aluminium hollow rectangular section of size 50mm x 38mm (2mm thick) and silicon sealent complete in all respect as per direction of EIC. | — | 20.00 | — | — | |
| — | — | — | 12,12,022 | ||
| Goods & Services Tax ( at present @ 18% ) | — | 1.00 | Lumpsum | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
AnnexureVIB.pdf
ATTACHMENT
TenderFormandAnnexuresnew.pdf Tender form and annexure
ATTACHMENT
Annexure-VA.pdf
ATTACHMENT
Advancecorrectionslips.pdf
ATTACHMENT
GCC_April-2022.pdf
ATTACHMENT
HTLTstandardspecification.pdf
ATTACHMENT
TenderBooklet.pdf
ATTACHMENT
3560Clause.pdf
ATTACHMENT
TenderFormandAnnexuresnew.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .