LAYING OF UNDER GROUND PIPE LINE OF 01 NO. DEEP TUBEWELL OF VILLAGE TEERA IN SAROYA BLOCK IN DISTRICT SBS NAGAR(UNDER 502 NO. NEW DEEP TUBEWELL PROJECT) PART-B

Amount

Laying of PVC Underground Pipe Line 200 mm dia of T/Well Village Teera of Saroya Block

Laying of PVC Underground Pipe Line 200 mm dia of 1 No. T/Well Block Saroya

Dag Belling double kassi stroke V-Shape minimum 10 cm depth.

Exacavation by mechanical means (JCB or Hydrulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming. Earth work excavation trimming and dressing of sides, leveling of beds of trenches to correct grade, cutting joint holes, refilling, consolidation, watering, including the cost of dewatering of rain water,Diversion for traffic, nightsignals. Providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing etc.and removal of surplus soil outside/inside the town involving lead upto 15mtr. complete in all respect. In all classes of soil except rocky.

Providing, Laying, fixing and jointing of PVC Pipes as per ISI 4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specification . 200 mm o/d pipe of 2.5 kgf./sqcm

Suppling, carriage and fixing PVC Bend size 200 mm Ф,4 kgf/sqcm, 1.5 mtr length of 90 degree

Suppling, carriage and fixing PVC Bend size 200 mm Ф, 4 kgf/sqcm, 1.5 mtr length of 45 degree

Suppling, carriage and fixing PVC Bend size 200 mm Ф, 4 kgf/sqcm, 1.5 mtr length of 30 degree

Suppling, carriage & fixing equal PVC Tee pressure 4 kgf/Cm², 200x200x200mm

Cost of One No. Riser (PVC pipe of 2.5 kgf/sqcm pressure and fitting of 4 kgf/sqcm) of 200mm dia as per approved drawing & Design unit each

Providing and Making outlet Khura (PVC pipe of 2.5 kgf/sqcm pressure and fitting of 4 kgf/sqcm) at riser point complete in all respect as per approved design/drawing 200 mm dia.

Providing and fixing Pressure air release pipe 200mm dia. (PVC pipe of 2.5 kgf/sqcm pressure and fitting of 4 kgf/sqcm) as per approved design/drawing.

Suppling & carriage of RCC spun pipe with rubber ring as per I.S:458-2003( pipe for road crossing)Class N.P.2. 250mm dia.

Suppling, carriage and fixing PVC coupler 200mm i/d ,4.0 kgf/cm²

Suppling, carriage and fixing PVC end cap 200mm I/D, 4.0 kgf/cm²

Const. of pipe stand with RCC 600 mm dia pipe complete in all respect as per drawing/design and PWD specification .

Making Grade Breaker as per design/drawing (PVC pipe of 2.5 kgf/sqcm pressure and fitting of 4 kgf/sqcm)and PWD specification( including the cost of Material, carriage & re-carriage at site of work).

Providing & fixing C.I/D.I flanged end , stem of SS (AIS 1410) & Bronze ( gunmetal) working parts sluice valves ISI maked 14846-2000 , including jointing. Testing & cost of Nut, bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge) .Class PN-1 as per ISI 200mm i/d Sluice Valves flanged and Const. of masonary sluice valve chamber excluding sluice valve cover as per Standard Design & Drawing of Public Health Dept. Size 0.9m x 0.9m.

JP ENGINEERING WORKS