GE/BAS-55/2023-24Certain repair to OTM and Md Accn and Periodical service in NCCSR and repair to wall fencing drains path culvert etc at Madhopur under GE Basoli

Amount

M & L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 including demolition of old Brickworkor stone masonary complete all as specified and as directed by Engineer -in-Charge

M & L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 including demolition of old Brickworkor stone masonary complete all as specified and as directed by Engineer -in-Charge

Ditto all as per item No 1 here-in-before but except Brick.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint including rendering 15mm thick in cement mortar 1:4 finished even and smooth surface without using extra cement and taking down old plastered surfaces complete all as specified and directed.

M & L two coat of oil bound distemper over 3mm thick wall care putty on new plastered surfaces of walls including rendering 15 mm thick in CM 1:6 on any surfaces of brick work, finished even & smooth without using extra cement including taking down old plastered surfaces complete all as specified and directed.

M & L preparing new plastered surfaces of ceiling and applying three coats of white wash in ceiling including rendering 10 mm thick in CM 1:3 on any surfaces of brick work, finished even & smooth without using extra cement including taking down old plastered surfaces complete all as specified and directed.

M & L two coat of cement base paint on new plastered surface of walls including rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of old decorated plastered or un plastered surface of wall and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old decorated plastered or un plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old decorated plastered or un plastered surface of walls and applying one coat of oil bound distemper with cement mortar /chalk whiting/Putty in any shade complete all as specified and directed.

M & L for preparation of old decoratede plastered or un plastered surface of wall and applying one coat of cement base paint and filling the gap or unequal surface with cement mortar /chalk whiting/Putty complete all as specified and directed.

M & L for preparation of old painted surfaces of wood or wood based surface of any description over 10 cm with or girth and painted with one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted surfaces of steel of any description over 10cm with or girth and painted with one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed..

M & L for preparation of steel surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red-oxide primer complete all as specified and directed..

M & L for preparation of surfaces and applying two coats of distemper Oil emulsion over a coat of primer and a coat of wall putty on walls complete all as specified and directed.

Taking down/ dismantling of broken/loose portion of chajja , facia upto 450mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary form work/scaffolding and matching with existing surface of facia, (including two coats of Apex Paint ) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and directed.

75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for 50 mm thick Sand filling/cushioning as in floor, foundation including watering and consolidation complete all as specified and directed by Engr -in- Charge.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 0f 60mm thickness with grey cement and pigment, M-35 grade complete all as specified and directed by Engr -in- Charge.

75mm thick PCC 1:3:6, type C-2 using 40mm graded crushed stone aggregates as in sub bases of floors and pavings complete all as specified and directed.

M & L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed in cement mortar (1:4) in floors, complete all as specified and directed.

M & L for Durastone / Endura heavy duty vitrified tiles of size 300mmX300mmX 9.5mm thick set jointed and pointed in neat cement slurry in floors with grey cement over and including 15 mm thick screed bed of 1:4 cement mortar complete all as specified and directed.

M&L for plain cement concrete type B1.1:2:4 (using 20 mm graded crushed stone aggregate) as in mass concrete, lavelling coarse,Sunken filling grading concrete etc complete all as specified and directed.

M& L for roof treatment with the following specicification - (a) Removal of existing old treatment of any type and roughening surfaces of old concrete of picking sweeping and washing down with water (b) 15 mm thick cement plaster/screed in CM 1:4 (c) applying evenly one coat of blown hot bitumen of grade 85/25 @ 1.2 kg per sqm on primed surfaces. (d) Applying a layer of APP based polymeric membrane 3mm thick (minimum) weighting 3.5 kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm top of membrane with Aluminium paint . The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application . complete all as specified and directed.

M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in CM 1:4 and dismantling floor, hearth or wall tiling a and removing rubbish off premises complete all as specified and directed.

M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in CM 1:4 including dismantling floor, hearth or wall tiling a and removing rubbish off premises complete all as specified and directed.

M&L for Vitrified Coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes and dismantling floor, hearth or wall tiling a and removing rubbish off premises complete all as specified and directed.

M&L premium designed vitrified ceramic tiles 10mm thick light shade (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Glazed ceramic tile 450x300x7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in cement and sand mortar 1:4 including dismantling floor, hearth or wall tiling an and removing rubbish off premises complete all as specified and directed.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed or bedding layer of mortar 10mm thick in cement mortar 1:4 for laying floor finishes including dismantling existing old granite work complete all as specified and directed.

S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. Fe 410-W(Gde-E-250) quality complete all as specified.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of AC/CGI/Galvalume sheets corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc complete all as specified and directed.

S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc , complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and pipe) complete, all as specified and directed.

S & F in repair PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, complete all as specified and as directed.

S & F in repair Vitreous China urinals, Half stall type, white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S & F in repair Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed

S & F in repair PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and directed.

S & F in repair PVC connection 15 mm size, of length 600 mm, with PTMT nuts complete all as specified and directed.

S & F in repair PVC grating 100mm square/round of PTMT complete all as specified and directed.

S&F in repair waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms and waste pipe complete all as specified and directed.

S&F in repair waste coupling of PTMT (half or full threaded) Minimum weight 40mm-60 gms and waste pipe complete all as specified and directed.

S & F 15mm bore tubes, medium grade, galvanised with and including all fittings including concealing to walls, floors, or ceiling or laid in floors etc including taking down old steel GI pipe complete all as specified.

S & F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F CI Lid/Cover Suitable for CI Oval Acess door bend of Size 100/75 mm complete all as specified and directed.

S & F in repair 15mm dia bore Stop valve/Angle Valve, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair CP angle stop valves (half turn type) conceald type (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed.

S & F in repair Bib taps, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, complete all as specified and directed.

S & F in repair Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, complete all as specified and directed.

S&F in repair Brass Float Ball valves, high pressure aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified and directed.

S&F in repair, Brass chromium plated tubular towel rail, 20 mm dia 'D' type 60 cm long between flanges fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F brass chromium plated shower rose 125mm size with swivel joints fixed in repairs including fixing to steel pipe or union complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick overall size 915mmx460mm bowl size 410mm x 330mm x160mm for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar connecting union to pipe, GI waste Pipe 32mm from sink to nahni trap of approved brand including cost of materials, adhesive solution, including coupling and with a pair of suitable C.I. brackets including painting the brackets with two coats of paint cutting holes in walls and making good the same etc. complete all as specified and directed

Supply and fixing in repair stainless steel plate rack 750 x 600 x 230 mm deep with spoon holders , shelves, fix to wall with suitable screws, washers, nut & bolts and necessary drilling etc. including making good the disturbed portion in cement mortar (1:4) to wall etc , complete all as specified and directed.

S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement all as specified and directed..

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls all as specified and directed..

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls all as specified and directed..

S&F in repairs 75mm bore PVC (SWR) junction single,(Single T) equal or unequal fixed to waste pipes complete all as specified and directed..

S&F in repairs 110mm bore PVC (SWR) junction single,(Single T) equal or unequal fixed to waste pipes complete all as specified and directed..

S&F in repairs 110mm bore PVC (SWR) bends any radius equal or unequal fixed to soil pipes complete all as specified and directed..

S&F in repairs 75mm bore PVC (SWR) bends any radius equal or unequal fixed to soil pipes complete all as specified and directed..

S&F in repair PVC (SWR) Vent cowl 110 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) Vent cowl 75 mm bore complete all as specified and directed.

S&F chromium plated Glass shelves fixed with and including chromium plated brass screws and plastic cleats. complete in all as specified and directed.

S&F in repair WHB mixer, Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement complete all as specified and directed.

S&F in repair wall mixer, Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement complete all as specified and directed.

S&F in repair,Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

S&F in repair,Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but n exc 4 sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and directed.

Taking down shutters of any description and refixing incl resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and directed.

S & F Factory made Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed.

S & F Factory made Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed.

M & L for 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed.

M & L for 30 mm thick Factory made 2nd class hard wood door shutter with top panel Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.(without sash bars) fitted with cut and mitred beads for securing glass, etc.; and bottom panel with panel of 9mm BWP commercial ply or 12 mm veneered particle board with comercial veneering on both faces. The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and directed.

M & L for solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, in opening etc complete all as specified and directed

M & L for factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified and directed.

S&F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made single piece solid panel PVC door shutter 35mm thick (style) consisting of frame made out of MS square tube of size 15mmx15mm (15 gauze) on top & bottom rail and 19mmx19mm (19 gauze) in style , single piece plain colour PVC sheet for top rail, lock rail, bottom rail on either side and as gap insert for top rail, bottom rail and style panel shall be of 10mm thick solid PVC sheet (one piece) to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC beading and joined together with solvent cement including 100mm size PTMT hinges, supplying & fixing in the frame at site all as specified & as directed

S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed

S & F 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and directed.

S & F 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed.

S & F Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and directed.

S & F 100mm size hasp and staple safety type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

M&L for 2nd class hard wood small fittings such as shaped door and window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimetre each complete all as specified and directed.

S & F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and directed.

S&F aluminium Mortice lock verticle type 100mm with 2 lever complete all as specified and directed.

S&F Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube, factory made with double side shutter wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide including taking down of old windows of any type complete all as specified

Supply and fixing Sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing Sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads, exc 1.5 sqm, complete all as specified and directed.

S&F Galvanized mild steel wire cloth 0.48 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in repair Galvanized mild steel wire cloth 0.48 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S & F natural colour anodised aluminium (minimum thickness of powder coating 50 micron ) for shutter of doors,windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings where required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tublar sections/appropriate Z sections and other sections conforming to IS:733 and IS: 1285,fixing with dash fastners of required dia and size,including necessary filling up the gaps at junction,i.e.at top,bottom and sides with required EPDM rubber/neoprene gasket etc .Aluminium sections shall be smooth,rust free,straight,mitered and jointed mechanically where required including cleat angle,aluminium snap beading for glazing/paneling,C.P brass/stainless steel screws complete all as specified and directed.

S & F natural colour anodised aluminium (minimum thickness of powder coating 50 micron)frame for doors,windows,ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed

S&F in repair Steel rolling shutters, thickness of laths1.25 mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,in including taking down complete: push pull or manual type complete all as specified and directed.

S&F in repair Ball bearing for rolling shutters complete all as specified and directed.

S & F Aluminium (extruded section) body door closer hydraulically regulated designation No- 3,universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg complete all as specified and directed.

S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern,with approved standard section and fixed to the existing window frame with C.P.brass/stainless steel screws @200 mm centre to centre,including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and dirercted

M&L PCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate) as in,coping Kerb stone, steps and other similar bands plinth courses, string courses, lacing courses, copings, kneelers, appex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M&L Reinforced cement concrete M-20 (Nominal mix) using 20mm graded crushed stone aggregates as in beams ,chajja,cantilevers, bressummers, lintels over 1.5 mtr span complete all as specified and directed

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

-ditto- here-in-before but 8mm dia and over upto and including 10mm dia as in stirrups, spacers, binders complete all as specified and directed.

S & F galvanised 2 strand steel barbed wire 2.24 mm dia barded with 2mm dia bar at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts incl securing or tying at crossing with and provn of galvanized mild steel wire staple or steel pins (Each line of wire to be measured) including taking down old barbed wire complete all as specified and directed.

Restraining and resecuring of steel barbed wire fencing including making good staples etc (each line of wire to be measured separately) complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in drains or surface channels finished even and fair including demolition of existing PCC of any description complete, all as specified and directed.

Material and Labour for brick work with sub class ‘B’ bricks(old size) straight or curved on plan to any radius in half brick thick wall built in CM 1:4 without bedding mortar (on sloping side of excavation) including necessary triangular mortar filling at top course and under the brick edging to level the course required at site including flush pointing in the same mortar as the work proceeds including demolition of existing brick work complete all as specified and directed.

Description all as per Serial item No 27 here in before but except bricks

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 (Gde E165) complete all as specified and directed.

M&L for Providing precast cement concrete in 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate as in louvres and jallies, 35mm thick (mea sured solid),and set in CM 1:4, including all mould- ings but excluding frame (Pre cast frame shall be measured separately) complete all as specified and directed.

M&L Reinforced cement concrete M-20 (Nominal mix) using 20mm graded crushed stone aggregates as in slabs, supported on walls, beam and columns in floors, and in shelves and the like complete all as specified and directed.

M&L for RCC M-20(Nominal mix) (using 20mm graded crushed stone aggregate) as in precast manhole cover and cover slab including necessary form work and moulds etc and set in cement mortar 1:4 ,including demolition of existing of any description complete all as specified and directed.

Steel Form work to edges of concrete flat, treads, window cills concrete railings, openings in concrete walls, floor & roofs n.exc. 20 cm wide and sides of RCC/PCC bands in walls horizontal or sloping and similar work all exc. 20 cm wide for rough finished flat surface, complete all as specified and as directed.

M&L for Providing precast RCC M-20(Nominal mix) using 12.5mm graded crushed stone aggregate, as in pillars of any shape, size & design and making grooves for insertation of jafri, jallies and fixed with existing/new jallie in CM 1:3, complete all as specified and directed.

M&L for rendering 15mm thick plastering 1:4 CM finished even and smooth without using extra cement etc including preparation of new plastered surfaces of walls by Vacuum based sanding machine complete all as specified, removal of nails etc & filling cracks/hole with putty, applying wall care putty 1mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of exterior emulsion paint over a coat of approved primer by spray machine/mechanized means including taking down cement or cement plaster on bricks or stone wall etc and racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for preparation of plastered surfaces of walls by Vacuum based sanding machine complete all as specified, removal of nails etc & filing cracks/hole with putty, applying wall care putty upto 1mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of exterior emulsion paint over a coat of approved primer by spray machine/mechanized means complete all as specified and directed.

Malpotra Enterprises

INDERJIT SINGH

Ms Narinder Kumar Sehgal

M/s. Jaswant Singh Govt Contractor