MAINTENANCE OF BUILDING AND INTERNAL SERVICES INCLUDING

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F Vitrified tiles light shade of 10mm thick (square/rectangular) polished area of each tile exc 0.38 sqm in floors, over and including 15 mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and as directed.

All as per item no 2 above, but , on vertical surfaces such as skirtings including taking down cement plaster etc complete all as specified and as direced.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm. in floors set and jointed over cement screed base 15mm screed bed in CM 1:6 and pointed in white or coloured cement to match complete all as specified and as direced.

All as per item no 4 above, but , on vertical surfaces such as skirtings cement plaster etc complete all as specified and as direced.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. in floors set and jointed over cement screed base 15mm screed bed in CM 1:6 and pointed in white or coloured cement to match complete all as specified and as direced.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. in floors set and jointed over cement screed base 15mm screed bed in CM 1:6 and pointed in white or coloured cement to match complete all as specified and as direced.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 15mm thick cement sand screed (1:4) complete all as specified and as direced.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and as direced.

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications complete all as specified and as directed.

S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-inCharge. complete all as specified and as directed.

S&F 125 mm long butt hinges extruded Aluminium alloy with galvanised mild steel hinge pin, bright polished Type B-21 fixed to PVC door with screws complete all as specified and as directed.

S&F 150mm long Aluminium anodised bolts barrel tower bolts of extruded section fixed to PVC door with screws complete all as specified and as directed.

S & F Aluminium anodised bolts barrel tower bolts 200 mm long of extruded section complete all as specified and as directed.

S & F powder coated anodised aluminium frame for sliding doors, window, ventilators, partitions with one or more rebates including joining cleat for fixing and finished with metal paste on gaps of the surface in contact with stone masonry walls / brick walls complete all as specified and as directed.

S & F powder coated anodised aluminium door shutters, aluminium sections weighing 0.55 Kg/m including joining cleats glazing clips, rubber neoprene packing , handle 2 Nos in each door, hinges, anodised aluminium snap, mortice lock, beading screws, bearings etc. complete all as specified and as directed.

S&F for 5.5 mm thick tinted glass exc 0.5 sqm of each pane of superior quality fixed to aluminium frame works with rubber beadings including solar control film of 25 micron reflective type sicked to glass panes as per instructions of manufacturers complete all as specified and as directed.

Supply and fix 12mm thick prelaminated particle board for insulation purpose, fixed to aluminium framework complete all as specified and as directed.

Repair and servicing to Aluminium door shutters n.exc 2.5 Sqm area, including taking down shutters from frames, replacing or realignment of members, cleats, etc, make door shutter to serviceable condition, refixing in same opening including locking device, floor pivot, aluminium handle,Aldrop bolt, towerbolt and floor spring as required etc complete all as specified and as directed

S&F in repairs , Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S & F for Ply wood12mm thick ,grade BWR type BB,fixed with screws to timber frame work including dismantling old boards complete all as specified and as directed.

S&F in repair for galvanised MS wire cloth 0.56 mm nomiral dia and wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F for 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F in repairs Aluminium alloy anodised Sliding bolt 300mm long with hasp, staple(bolt type and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed.

S & F in repairs aluminium handles 150mm size cast type anodised complete all as specified and as directed.

S & F in repairs floor door stopper 150mm length of cover plate aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.

S & F in repairs 0.56mm thick plain aluminium sheeting alloy 31000H4 in doors etc complete all as specified and as directed.

Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and providing and fixing new ones complete all as specified and as directed.

Hacking out old broken glass ( any thickness, size, quality or description) from metal frame frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones including supply and fix 4mm thick sheet glass ordinary quality in square or n. exc 0.5 sqm each pane up to 4th floor complete all as specified and as directed.

S & F sheet glass ordinary quality 4mm thick in squares n.exc 0.50 sqm in each pane including hacking out old broken glass (any thickness size quality or description ) from metal /wooden frames, complete all as directed by Engr-in-Charge complete all as specified and directed.

S & F sheet glass ordinary quality 4mm thick in squares exc 0.50sqm in each pane including hacking out old broken glass (any thickness size quality or description ) from metal /wooden frames, complete all as directed by Engr-in-Charge complete all as specified and as directed.

S & F figured glass, pinhead type 4mm thick in squares n.exc 0.50sqm in each pane including hacking out old broken glass (any thickness size quality or description ) from metal /wooden frames , complete all as directed by Engr-in-Charge complete all as specified and as directed.

S & F for providing 20mm dia decorative type curtain rods including necessary brackets fittings etc complete for doors and windows complete all as specified and as directed.

S & F in repairs Vitreous china wash down water closet pan (pedestral pattern) white including fixing bolts, flushing cistern and flush pipe but including fixing charges complete all as specified and as directed.

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and as direced.

Supply and fix in repairs vitreous China wash basin, white, flat back, size 550 x 400mm including waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or erecting stand including 15mm CP pillar tap and waste pipe etc complete all as specified and as directed.

S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified and directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified.

S & F in repair 15 mm bore stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flange complete all as specified and as directed.

S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed complete all as specified and as directed.

S&F in repair 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S & F in repairs 15mm bore Pillar taps, cast copper heads, capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repair 100mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified and as directed.

S & F waste coupling of PTMT (half or full threaded) (minimum weight 32mm-45gms/40mm-60gms) complete all as specified and as directed.

S & F waste coupling of PTMT (half or full threaded) (minimum weight 40mm-45gms/40mm-60gms) complete all as specified and as directed.

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store. complete all as apecidied and as directed.

S & F CPVC 16 mm bore, SDR -11 Grade for hot and cold water with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F CPVC 20mm bore, SDR -11 Grade for hot and cold water with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and as directed.

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and as directed.

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as complete all as specified and as directed.

S & F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm. complete all as specified and as directed.

S & F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as complete all as specified and as directed.

S&F for precast cement concrete type B1 1:2:4 (20 mm graged aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc and setting in mortar complete with joints to match complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Raking out cement joints/pointing to random rubble or polygonal rubble uncoursed or brought up to course including keyed pointing in CM (1:4) etc complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick as in plinth protection complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar , incl all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6 but except Blocks etc complete all as specified and as direced.

Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6 complete all as specified and as direced.

Material and Labour for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete all as specified and as direced.

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and as direced.

M&L for rendering 10mm thick in patches in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and as direced.

M & L for rendering 5mm thick cement plaster in cm 1:3 on ceiling including finished even and smooth without using extra cement complete all as specified and as direced.

M&L for rendering 15 mm thick in patches in cement mortar 1:4 on other than fair face of brick work or concrete surfaces and finishing the surface even & fair complete all as specified and as direced.

M&L for preparation of new surface/undecorated surfaces surface of ceiling and applying three coats of white washing.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified and as direced.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified and as direced.

Disconnecting existing tanks capacity exc 250 n.exc 500 litre, setting aside (lowering if required) for repairs, incuding cleaning and removing all scale and dirt etc from tanks and form mouths of circulating pipes and hoisting if required and refixing in position complete all as specified and as direced.

Disconnecting existing tanks capacity exc 500 n.exc 1000 litre, setting aside (lowering if required) for repairs incuding cleaning and removing all scale and dirt etc from tanks and form mouths of circulatory pipes and hoisting if required and refixing in position complete all as specified and as direced

Dismantling of existing water tanks capacity exc 250 n.exc 500 litre and removal to store complete all as specified and as direced

Dismantling of existing water tanks capacity exc 500 n.exc 1000 litre and removal to store complete all as specified and as direced.

S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as direced.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed (Minimum weight 20mm - 210 gms) etc complete all as specified and directed.

S & F 25 mm bore valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum wieght for 25mm-455 grams as in repairs complete all as specified and directed.

S&F gun metal gate valves with iron wheel head 20mm complete all as specified and directed.

Cleaning/removing blockage of water closets, urinals, wash basins, sinks, kitchen & bathroom floor/nahani traps and gully traps etc including cleaning of drain pipes of any discription & size up to 1st manholes (rates includes for removing off MH covers & placing the same in position after cleaning) by rodding/choke remover or by any other suitable means manually as in foul condition complete all as specified and as directed.

De- sludging from existing Septic tanks, soakage wells and Manholes of any capacity size and depth including disposal of sludge through mechnically sewage suction pump and dividely store in covered container etc complete and removing the sludge in covered van/trolly outside the Defence land and taking off the manhole cover and placing in the same position after taking out sludge and covering pit with minimum 30 cm thick layer of earth work etc complete all as specified and as directed . Note :- Dewatering of existing manhole, septic tank and manholes will not be measured, only solid material will be measured. complete all as specified and as directed.

M&L for Preparation of old surface of ceiling and applying one coat of white washing. Note : Preparation including brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots, removing of nails, cracks making good holes by putty etc, spreading and removing coverings to doors, windows, floors fittings to protect them from splashes, washing floors, cleaning glass, joinery, fittings, drops, splashes, leaving premise clean and tidy etc. all as specified in SSR-2010

All as per serial item No.83 above, but, applying one coat of white washing on wall.

All as per serial item No.83 above, but, applying one coat of oil bond distempering with emulsion on ceiling complete all as specified and directed.

All as per serial item No.83 above, but , applying one coat of oil bond distempering on walls complete all as specified and directed.

All as per serial item No.83 above, but, applying one coat of cement base paint complete all as specified and directed.

Material and Labour for preparation of old decorated plastered or unplastered surfaces of Walls and applying one coat of exterior emulsion paint (APEX) on Roof / Chajja / Facia / Walls / Path etc complete all as specified and directed.

M&L for preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per serial item No.89 above, but , applying one coat of Synthetic varnish. complete all as specified and directed.

M&L for Preparation of old painted surface of steel surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old painted surfaces of brick, stone, concrete, asbestos cement or plaster surfaces of any description, not otherwise described, over 10 cm girth or width not otherwise described and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

M&L for writing letter or figures (Block, roman, Italic or Indian) n.exc 30 CM height. complete all as specified and directed.

Demolition of PCC of any description and in any position as in sunken floor. complete all as specified and directed.

Material and labour for Rendering 15 mm thick on fair concrete surfaces of roofs in CM (1:3) finished even and fair without using extra cement mixed with 3% Integeral Water proofing compound by weight of cement complete all as specified and as directed by Engr-in-charge. (Note: Integral Water proofing compound will be measured and paid for separately).

M&L for wire brushing and cleaning top surface of tiles, cement concrete, including flashings and jounction of parapets etc and surface painting with a layer of blown grade bitumen of 85/25 penetration grade @ 1.70 Kg/Sqm and lightly tampered to the surface of roof or sunken etc and S&F APP based polymeric membrane mimimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric land on primed surfaced by forced application complete all as specified.

Material and labour for PCC 1:5:10, type E-2, using 40 mm graded stone aggregate as in sunken slab filling complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Material and labour for PCC 1:2:4 Type B-1, 30 mm thick using 20 mm graded stone aggregate as in flooring finished fair and even complete all as specified and directed.

M & L for non skid ceramic coloured tiles 7 to 8mm thick square/ rectangular, size of tile 300 x 300 mm or above, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed for bedding layer of mortar 15 mm thick for laying floor finishes in cm 1:6 complete all as specified and directed.

Supply and fix plastic water closet seat cover any colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, fixing in repairs. complete all as specified and directed.

S&F PVC Connection 15mm size with PTMT Nuts of length 60cm and fixed-in-repairs, complete all as specified and as directed complete all as specified and directed.

Supply and Fixing in repairs health faucets Chromium plated (hand shower) with 8mm dia 1.50m long flexible hose, wall hook fixed with brass screws and all accessories complete all as specified and directed complete all as specified and directed.

S&F in repairs 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed complete all as specified and directed.

S&F in repairs , CP shower rose for fixing with 15mm pipe including 15mm size shower arm of 195mm long with bend of 45 degree with flange of chromium plated complete all as specified and directed complete all as specified and directed.

M & L for PVC floor trap with grating including jointing with solvent cement, 75 mm dia outlet. complete all as specified and directed.

Supply and fix PVC (SWR) door Tee of size 75 mm complete all as specified and directed.

Material and Labour for PCC (1:2:4) type B-O using 12.5 mm graded stone agg as in padding over roof for filling depression and making proper slope complete all as specified and directed.

Removing demolished material exc 1.5 KM but n.exc 5 KM and depositing where directed at a level n.exc 1.50 M above the starting points complete all as specified and directed.

M & L for brushing in neat c ement slurry with 3 Kg of cement per sqm on old surfaces of concrete of plaster on roof all as specified and directed complete all as specified and directed.

M&L rendering in CM (1:3) 10mm thick on concrete surface as in required slope for draning out the rain water including takingdown APP membrane and plastering etc complete all as specified and as directed

Supply only water proofing compound conplast X 421 IC of FOSROC chemcial (Indian limted) complete all as specified and directed.

M & L for water proofing treatment on horizontal or vertical surfaces applying oil bound bitumen primer @ 0.40Kg/Sqm and providing 3mm thick approved modified water proofing membrane weighing not less than 3Kg per Sqm reinforced with non Woven polyester mat weighing not less than 160gm per sqm a coat of hot blown bitumen 85/15 or 90/15 @ 1.2Kg per Sqm is apply on top of polymeric membrane and finally finished with coat of solar reflective bituminous aluminum paint @ 100 Grams/Sqm complete all as specified and directed.

Demolition and breaking up drain pipe (SGW, AC or reinforced concrete) set in cement mortar of 200 mm internal dia pipe complete all as specified and directed.

S & F 200 mm dia , PVC (SWR) pipe double socketed in any length with rubber rings joints fixed to walls /floors complete all as specified and directed.

S & F PVC (SWR) bends of 200 mm dia complete all as specified and directed.

M/s STAR ELECTRICALS

G K CONSTRUCTIONS