PERIODICAL SERVICES AT MD OTM ACCN OF MEG CENTRE MDC GE N IN THE AOR AGE BR MEG REPAIRS TO PLUMBING SANITARY FITTINGS FLOORING JOINERY INTERNAL AND EXTERNAL FINISHES AND OTHER MISC BR WORK AT PAO OR MEG CENTRE AND REPAIRS TO ROOF

Amount

Dismantling timber scantlings in fillet, rail, posts, rafter, purlins etc under 40 sq. cm in section, in any position as in framed work etc complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed

Demolition of cement concrete (un reinforced) in ground floors and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 sqm each etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

Excavating in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc for for shafts, wells cesspits, manholes, piers holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard / dense soil etc complete all as specified and as directed

M&L for plain cement concrete 1:4:8 type D-2, using 40 mm graded stone aggregates as in foundations and mass concrete etc complete all as specified and as directed

M&L Pre-cast Cement concrete Type C1, 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exc 10 cm in width and setting in CM 1:6 incl demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete / Stone masonry surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:6) first layer and rendering 5 mm thick second layer in CM (1:4) mixed with water proofing compound as per manufacture instruction finished even and smooth without using extra cement on fair faces of brick work or concrete surface etc complete all as specified and as directed Notes : WPC shall be measured and paid separately

Supply only liquid water proofing compound

Complete removal of exising treatment of wall by means of wire brushing, sand paper, manually or mechanically up to visibilty of plastered surface incl rubbing and washing etc complete all as specified and as directed

M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed

M&L for preparing Old plastered surface of ceiling and applying two coats of distemper oil emulsion, white or tinted complete all as specified and as directed

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed

M&L for Preparing Old plastered suface of walls and applying two coats distemper oil emulsion, white or tinted complete all as specified and as directed

M&L for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

S&F 35mm thick flush door shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed Note - Wire Cloth & Glass shall be measured and paid separately under respective items.

S&F 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc complete all as specified and as directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed '

S&F 200mm long aluminium anodised tower bolt of extruded section etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed

M&L MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed

M&L MS work as in tubular trusses including special shaped washer etc conforming to IS 1161-1979 Grade Ste-240. complete as in roof truss, purlins, col etc complete all as specified and as directed

M&L MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, conforming to Fe 290 (Gde-E-165) etc complete all as specified and as directed

M&L MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc incl dismantling of asbestos cement sheet (corrugated, semi corrugated, etc.) etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in ridges / valley to wall, fixed with self tapping screws incl dismantling of Ridges etc complete all as specified and as directed

S&F in repairs 7 to 8 mm profile thickness thick PVC Coloured Sheet (any Shape, coloured, pattern as approved ) suitably placed in false ceiling incl making sunken side corner, design as directed etc incl grid work made of Aluminium as per Mfd Instruction etc complete all as specified and as directed. Note: Quoted rate is inclusive of grid work. (Make - Rajshree/ Magama /Syntex or any other equilavent make as approved by GE)

S&F in repairs 7 to 8 mm Profile thickness, Printed colour PVC sheet (Any size, shape, Texture as approved) in strips & channel feathered at the edges for fixing on Wall caldding / Vertical surface and fixing at site incl grid work made of Aluminium as per Mfd Instruction etc complete all as specified and as directed Note: Quoted rate is inclusive of grid work. (Make - Rajshree / Magama / Syntex or any other equilavent make as approved by GE)

M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) as in sub base of flooring etc complete all as specified and as directed

M&L for 25 mm thick Cement concrete type B-0,1:2:4 (12.5mm graded stone aggregate) as in levelling course of flooring etc complete all as specified and as directed

M&L for Vitrified ceramic tiles any shade / double Charged / Ultra Charged (GVT), colour 8-9mm thick (square / rectangular ) polished, area of each tiles exc 0.42 sqm but not exc 1.00 Sqm each in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed of 15mm thick in CM(1:6) incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for Vitrified ceramic tiles any shape / double Charged / Ultra Charged (GVT), colour 8-9mm thick (square /rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 Sqm each as in vertical surface (Skirting /Dado) , set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including including rendering of 10mm thick in CM(1:3) incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

Demolition of stone slab and tile of any description or thickness in floor, arons etc (Laid dry or bedded and pointed in any mortar) etc complete all as specified and as directed

M&L for M-Sand cushioning for laying of interlocking tiles etc complete all as specified and as directed.

M&L for machine presssd pre-cast concrete interlocking coloured paver Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and as directed

S&F for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over and including Screed bed or bedding layer of mortar 15mm thick in CM 1:6 etc complete all as specified and as directed complete all as specified and directed.

M&L for 18-20mm thick Granite stone slab (Z Black or any other colour as approved) (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round and polishing incl 15 mm thick screed bed in CM 1:6 etc complete all as specified and as directed

S&F in repairs rotational moulded polythene water storage tank (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed

S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

Supply & laying 25 mm outer dia CPVC pipes SDR 11 (Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including all fittings and specials complete all as specified including taking down old unserviceable pipe lines of any type.

S&F in repairs EWC (Ivory) with normal closing seat cover and P or S trap including connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed (Make Cat no 4018 of Prayag or equivalent make of CA)

S&F in repairs white vitreous china one piece wash basin of size 560X410X180mm excluding taps but including 32 mm dia chromium plated fitting, PVC waste pipe 610 mm long and PVC connection 450 mm long complete all as specified and as directed

S&F in repairs Full Stall Viterous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl 40 mm dia PVC waste pipe 610 mm long and PVC connection 450 mm long, flush pipe, grating and Union for discharge pipe etc complete all as specified and as diected

S&F of kitchen sink made of stainless steel 1mm thick kitchen with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets or fixing in granite slab and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete in repairs including Dismantling of old sink

S&F in repairs PVC flushing cistern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc incl PVC connection 450 mm long complete all as specified and as directed (Make Cat no BA-502 of Prayag or equivalent make of CA)

S&F in repair 15mm bore Brass CP wall mixer with L Bend (with provision of hand shower) for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed (Make Cat no 9275 of Prayag or equivalent make of CA)

S & F in repairs 15 mm bore central holes mixer w/o pop up waste system (9" spout) all as specified and as directed. (Make Cat no 9350 of Prayag or equivalent make of CA)

S&F in repair 15 mm bore sink mixer with regular spout W/M etc complete all as specified and as directed (Make Cat no 9360 of Prayag or equivalent make of CA)

S&F in repairs bib cock with flange fancy type cast copper alloy chromium plated with capstan head screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed (Make Cat no 9206 of Prayag or equivalent make of CA)

S&F in repairs angle cock with flange fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch fixed for 15 mm dia bore pipe complete all as specified and as directed (Make Cat no 9210 of Prayag or equivalent make of CA)

S&F in repairs soap dish holder with glass etc complete all as specified and as directed (Make Cat no BA-25G of Prayag or equivalent make of CA)

S&F in repairs overhead round rain shower 8" with out armns) of 15 mm bore dia etc complete all as specified and as directed (Make Cat no BOS-41 of Prayag or equivalent make of CA)

S&F in repairs SS Towel rail 600 mm long incl fixing arrangement etc complete all as specified and as directed (Make Cat no BA-10S of Prayag or equivalent make of CA)

S&F in repairs stainless steel towel ring incl fixing arrangement etc complete all as specified and as directed (Make Cat no BA-41 of Prayag or equivalent make of CA)

S&F in repairs Hand shower (Health faucet) (ABS Body) with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as directed

S&F in reapirs 18mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in wall panelling / cub board shutter, Kitchen shelves and modular kitchen shutter, shelves, drawers etc over 0.90 mm thick decorative laminate type 1, of surface finish (both side of shutter), colour and pattern as approved, fixed with approved adhesive as per maker's instructions etc complete all as specified and as directed

S&F in repairs stainless steel kitchen basket in various type of baskets susch as plaint basket height 4", Thali basket 8" height, Cup saucer basket 4" heigt, and perforated cutlury basket 4" height all as specified and directed.

S&F in repairs Stainless steel channel for basket sizes 450 to 600 mm long and 45mm wide all as specified and directed

S&F in repiars Stainless steel auto closing concealed hinges 9.5 cranks for half overlay doors with opening angle 95* (14-32mm) with integrated overlay adjustment + 2.50mm & depth adjustment 4mm complete all as specified.

S&F in repairs 150 mm size Stainless steel handle fit to modular section etc complete all as specified and as directed

M&L for Pre-cast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc incl demolition of existing RCC Slab of any description and in any position etc complete all as specified and directed.

M&L TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

S&F in repairs Brass Wood Brown wooden Venetian Blinds / Vertical Blinds , sanding texture incl fittings, screw etc complete all as Specified and as directed as approved by Engr-in-charge.

S&F in repairs powder coated aluminium grill (minimium thickness of powder coating 50 micron) 4 to 5 mm thick and mesh size 60mmx60mm fixed with aluminium beading in any type of frame work etc complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and as directed

Removing excavated material to a distance exc. 50 m and not exc 250m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of exc 1.0 Km but not exc 1.50Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, capacity of tank exc 250 liter but not exc 500 litre and marking the date of clening with next date of cleanng etc complete all as specified and as directed

All as per item No 77 above but for capacity of tanks Exc 500 litre N.exc 1000 ltr capacity

All as per item No 77above but for capacity of tanks Exc 1000 litre N.exc 2000 ltr capacity

Material and labour for spraying antiweed / non toxic solution / chemicals containing Glyphosate as per manufacture instructions and removing the weed including the roots after ensuring complete de-germification of palnt/weed and cutting down the plant/trees off from roof/top sides of external walls of bldgs, in chajjas, wall junctions, junctions of GI/CI/AC/PVC pipes and taking out roots entered in wall/slabs, including making good the surface using PCC 1:2:4 type B1 or cement mortar (1:2) or brick work in CM(1:4) plastered with CM(1:4) to match with existing surface and repairing the pipes and joints which was affected by cutting down/taking out process all as specified and as directed for plants / trees located in the buildings upto four storey high, complete all as specified and directed by Engineer-in-charge.

M&L Preparation of old surfaces including brooming down with steel wire brushing scrapping down soot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc on wall surfaces and applying one coat of oil bound distemper white or tinted all as specified & as directed.

M&L for Complete removal of existing treatment on wall and applying two coat of oil bound distemper white or tinted over a coat of primer etc complete all as specified and directed

All as per item No 81 above but one coat of OBD on ceiling surfaces

M&LPreparation of old surfaces including brooming down with steel wire brushing scrapping down soot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc and applying one coat of white wash on internal wall surfaces all as specified & as directed.

Al as per item No-84 above but in two coats of white wash

All as per item No-84 above but one coat of white wash in ceiling surfaces

M&L Preparation of old surfaces including brooming down with steel wire brushing scrapping down soot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc on wall and applying one coat of cement base paint complete all as specified and directed. (Buildings upto four storey high)

M&L Preparation of old surfaces including brooming down with steel wire brushing scrapping down soot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc on wall and applying two coat of cement base paint all as specified and directed. (Building upto four storey high)

M&L Complete removal of existing treatment on wall surface of any description including brooming down with steel wire brushing scrapping down smoke soot's ,moulds,moss and efflorescence, salts, trading oil and greasy spots etc and Applying two of exterior emulsion paint (APEX ULTIMA OR TECHNO COMMERCIALLY EQUIVALENT IN OTHER APPROVED MAKES AS IN CA)) over a coat of primer as per mfd insttruction etc complete all as specified and as directed. Note :- Work to be carried out in Buildings upto four storey high

M&L Preparing old treated surface of wall of any description including brooming down with steel wire brushing scrapping down smoke soot's, moulds, moss and efflorescence, salts, trading oil and greasy spots etc and Applying one coat of exterior emulsion paint (APEX ULTIMA OR TECHNO COMMERCIALLY EQUIVALENT IN OTHER APPROVED MAKES AS IN CA)) etc complete all as specified and as directed. Note :- Work to be carried out in Buildings upto four storey high

M & L for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm high

M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface and M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished plastered surface even and smooth without using extra cement

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface and M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 with WPC, finished plastered surface even and smooth without using extra cement Note :- WPC will be measured and paid separately

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface and M&L for rendering 5 mm thick on ceiling /RCC surfaces in cement mortar 1:3, finished plastered surface even and smooth without using extra cement

M & L preparation of newly plastered surface of wall and applying two coats of cement base paint over one coat of primer complete all as specified and as directed.

M & L for preparing newly plastered ceiling surfaces and applying three coat of white wash complete all as specified & as directed.

S & F in repairs 20 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed

S & F in repairs 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

M/s. ARK BUILDERS (BID ID -3459588)

Suresh painters (BID ID -3460222)

Sangam Construction (BID ID -3460668)

ABHISHEK CONSTRUCTIONS (BID ID -3460604)

JAIHIND ENTERPRISES (BID ID -3465982)

MAA ENGINEERING SERVICERS (BID ID -3462099)

K. VENKATESH NAIDU (BID ID -3460123)