Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.1 LAccepted-AOC | L1 | Accepted-AOC L1 Accepted | |
| 2 | L2₹27.7 L+₹66,577 (2.46%)Rejected-AOC | L2 | Rejected-AOC Other than L1 | |
| 3 | L3₹29.7 L+₹2.6 L (9.71%)Rejected-AOC | L3 | Rejected-AOC Other than L1 | |
| 4 | L4₹30.2 L+₹3.1 L (11.4%)Rejected-AOC | L4 | Rejected-AOC Other than L1 | |
| 5 | L5₹30.4 L+₹3.3 L (12.2%)Rejected-AOC | L5 | Rejected-AOC Other than L1 |
| Sl No | Description | Qty | Unit | harish kumar and co L5 | LAL CONSTRUCTIONS L4 | M/S JEEVAN LAL SHARMA L10 | M/s Vishwakarma Enterprises L2 | M/s Rajesh Kumar Contractor L9 | Ankush Gupta L3 | M/s Chopra Constructions L1 | M/S KARAN SINGH CONTRACTOR L8 | bushan kumar L7 | M/S RSJ BUILDER AND SUPPLIERS L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling /demolition of any type of old disposing existing roof treatment of any description and in any position over RCC Roof, of any thickness and any description etc including removing/disposing off old water proofing membrane outside MOD land complete all as specified and directed. (Only roof treatment/membrane area shall be measured). | 850 | Sqm | 5 ₹4,250 | 10 ₹8,500 | 10 ₹8,500 | 10 ₹8,500 | 20 ₹17,000 | 10 ₹8,500 | 2 ₹1,700 Lowest | 50 ₹42,500 | 2 ₹1,700 Lowest | 5 ₹4,250 |
| 2.00 | Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided including mud/ mudfaska/ Brick tiles or roof tiles etc and removal outside MoD land complete all as specified and directed. | 35 | Cum | 30 ₹1,050 | 100 ₹3,500 | 100 ₹3,500 | 100 ₹3,500 | 500 ₹17,500 | 10 ₹350 | 20 ₹700 | 200 ₹7,000 | 50 ₹1,750 | 5 ₹175 Lowest |
| 3.00 | 15mm thick plaster on roof / concrete surfaces incl parapet etc in cement mortar 1:3 and finished even and smooth without using extra cement and mixed with waterproofing compound as per manufacturers instructions.
(Note. WPC shall be measured and paid separately). | 850 | Sqm | 85 ₹72,250 | 90 ₹76,500 | 100 ₹85,000 | 80 ₹68,000 | 150 ₹1,27,500 | 130 ₹1,10,500 | 70 ₹59,500 Lowest | 120 ₹1,02,000 | 100 ₹85,000 | 100 ₹85,000 |
| 4.00 | Water proofing treatment to RCC roof slab including parapet as under :- (a) Ist Course : Apply a coat of bituminous primer conforming to IS-3384@ 0.40 Kg /Sqm on prepared surface of plaster and after drying of primer, apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm on plastered surfaces.
(b) 2nd Course : APP (Atactic Polypropylene) modified polymeric membrane, 5 layered, 3 mm thick weight not less than 3.0 Kg/Sqm with 150 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 150 mm end overlap, membrane has to be laid with LPG torch and overlap sealed and finished neat, all joints and changes in direction should be covered with cement mortar 1:3 mixed with SBR latex @200ml/bag of cement and curved before laying of membarance.
(c) 3rd Course : Apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm over membrane and dusted with dry sand @ 0.50 to 1 Kg/sqm.
(i) On Non-accesible roof : After providing (a) to (c) provide aluminium paint as per manufacturer instructions. (ii) Covered fillet in PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) of required radius shall be provided at the junction of roof and vertical surface such as parapet wall/mumty around opening and treatment mentioned above shall be applied followed by a cement plaster 20mm thick in cement mortar(1:6).
Note :
(i) Quoted rates are inclusive of all of the above work.
(ii) Water proofing treatment shall only be carried out by the authorised personal of the Company and proper record of the same shall be maintained. | 850 | Sqm | 380 ₹3,23,000 | 625 ₹5,31,250 | 445 ₹3,78,250 | 350 ₹2,97,500 Lowest | 400 ₹3,40,000 | 450 ₹3,82,500 | 350 ₹2,97,500 Lowest | 470 ₹3,99,500 | 555 ₹4,71,750 | 600 ₹5,10,000 |
| 5.00 | Digging out roots of bushes, small trees, grass of any dia & girth from accessible roof projection, chajjas, wall junction, parapet etc at any height by necessay demolition of brick work/ stone masonary/ conrete/ RCC wall or slab etc and filling holes and levelled with cement concrete B-0, 1:2:4 (12.5mm graded crushed stone aggregate) and necessary rendering with cement mortar 1:4 after applying damp proof epoxy based primer and matched with existing surfaces complete all as specified and directed. | 200 | Sqm | 150 ₹30,000 | 100 ₹20,000 | 150 ₹30,000 | 20 ₹4,000 | 50 ₹10,000 | 200 ₹40,000 | 30 ₹6,000 | 50 ₹10,000 | 83 ₹16,600 | 10 ₹2,000 Lowest |
| 6.00 | Digging out roots of bushes, small trees, grass of any dia & girth from accessible roof surface etc at any height by necessay demolition of brick work/ stone masonary/ conrete/ RCC wall or slab etc and filling holes and levelled with cement concrete B-0, 1:2:4 (12.5mm graded crushed stone aggregate) and necessary rendering with cement mortar 1:4 after applying damp proof epoxy based primer and matched with existing surfaces complete all as specified and directed. | 750 | Sqm | 150 ₹1,12,500 | 100 ₹75,000 | 150 ₹1,12,500 | 30 ₹22,500 | 50 ₹37,500 | 180 ₹1,35,000 | 30 ₹22,500 | 50 ₹37,500 | 83 ₹62,250 | 10 ₹7,500 Lowest |
| 7.00 | PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof padding in slop, finished surface even and smooth without using extra cement, all as specified and directed. | 25 | Cum | 3,000 ₹75,000 | 290 ₹7,250 | 4,900 ₹1,22,500 | 4,000 ₹1,00,000 | 4,000 ₹1,00,000 | 220 ₹5,500 Lowest | 2,700 ₹67,500 | 4,500 ₹1,12,500 | 4,100 ₹1,02,500 | 4,000 ₹1,00,000 |
| 8.00 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, culverts,etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed . | 10 | Cum | 50 ₹500 | 100 ₹1,000 | 300 ₹3,000 | 50 ₹500 | 500 ₹5,000 | 5,100 ₹51,000 | 30 ₹300 | 200 ₹2,000 | 100 ₹1,000 | 5 ₹50 Lowest |
| 9.00 | Brick work with old size sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified. | 6 | Cum | 3,000 ₹18,000 | 4,500 ₹27,000 | 4,900 ₹29,400 | 2,200 ₹13,200 | 4,000 ₹24,000 | 5,100 ₹30,600 | 2,200 ₹13,200 | 2,000 ₹12,000 Lowest | 3,700 ₹22,200 | 4,200 ₹25,200 |
| 10.00 | Description all as per Srl item No. 9 here-in-before, but except bricks. | 3 | Cum | 1,000 ₹3,000 | 2,600 ₹7,800 | 1,500 ₹4,500 | 1,800 ₹5,400 | 2,000 ₹6,000 | 5,100 ₹15,300 | 900 ₹2,700 Lowest | 2,000 ₹6,000 | 1,200 ₹3,600 | 3,000 ₹9,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
18 Jun 2025, 6:00 pmClosed
GE (N) Akhnoor
GE (N) Akhnoor C/O 56 APO Pin-181201
VEGETATION REMOVAL ROOF TREATMENT REAPIR TO JOINERY CHAJJA AND PERIODICAL SERVICES IN MD ACCN UNDER GE (N) AKHNOOR
2025_MES_709614_1
GE(N)/AKH-18/2025-26
Open Tender
Civil Works
Item Rate
180 days
Akhnoor
Class D Cat a i b i
8 documents required · 8 mandatory
₹500
GE (N) Akhnoor
₹90,000
Yes
9 Sept 2025
22 May 2025
20 Jun 2025
22 May 2025
18 Jun 2025
5 Jun 2025
Amount
Dismantling /demolition of any type of old disposing existing roof treatment of any description and in any position over RCC Roof, of any thickness and any description etc including removing/disposing off old water proofing membrane outside MOD land complete all as specified and directed. (Only roof treatment/membrane area shall be measured).
Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided including mud/ mudfaska/ Brick tiles or roof tiles etc and removal outside MoD land complete all as specified and directed.
15mm thick plaster on roof / concrete surfaces incl parapet etc in cement mortar 1:3 and finished even and smooth without using extra cement and mixed with waterproofing compound as per manufacturers instructions. (Note. WPC shall be measured and paid separately).
Water proofing treatment to RCC roof slab including parapet as under :- (a) Ist Course : Apply a coat of bituminous primer conforming to IS-3384@ 0.40 Kg /Sqm on prepared surface of plaster and after drying of primer, apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm on plastered surfaces. (b) 2nd Course : APP (Atactic Polypropylene) modified polymeric membrane, 5 layered, 3 mm thick weight not less than 3.0 Kg/Sqm with 150 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 150 mm end overlap, membrane has to be laid with LPG torch and overlap sealed and finished neat, all joints and changes in direction should be covered with cement mortar 1:3 mixed with SBR latex @200ml/bag of cement and curved before laying of membarance. (c) 3rd Course : Apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm over membrane and dusted with dry sand @ 0.50 to 1 Kg/sqm. (i) On Non-accesible roof : After providing (a) to (c) provide aluminium paint as per manufacturer instructions. (ii) Covered fillet in PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) of required radius shall be provided at the junction of roof and vertical surface such as parapet wall/mumty around opening and treatment mentioned above shall be applied followed by a cement plaster 20mm thick in cement mortar(1:6). Note : (i) Quoted rates are inclusive of all of the above work. (ii) Water proofing treatment shall only be carried out by the authorised personal of the Company and proper record of the same shall be maintained.
Digging out roots of bushes, small trees, grass of any dia & girth from accessible roof projection, chajjas, wall junction, parapet etc at any height by necessay demolition of brick work/ stone masonary/ conrete/ RCC wall or slab etc and filling holes and levelled with cement concrete B-0, 1:2:4 (12.5mm graded crushed stone aggregate) and necessary rendering with cement mortar 1:4 after applying damp proof epoxy based primer and matched with existing surfaces complete all as specified and directed.
Digging out roots of bushes, small trees, grass of any dia & girth from accessible roof surface etc at any height by necessay demolition of brick work/ stone masonary/ conrete/ RCC wall or slab etc and filling holes and levelled with cement concrete B-0, 1:2:4 (12.5mm graded crushed stone aggregate) and necessary rendering with cement mortar 1:4 after applying damp proof epoxy based primer and matched with existing surfaces complete all as specified and directed.
PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof padding in slop, finished surface even and smooth without using extra cement, all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, culverts,etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed .
Brick work with old size sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified.
Description all as per Srl item No. 9 here-in-before, but except bricks.
Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan of any radius, built in cement mortar 1:4, complete all as specified & directed.
Rendering 15mm thick cement plaster with cement mortar(1:4) on fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement, complete all as specified.
Repair to balcony/Facia/parapet and soffit of chajjas etc by taking down old rendering 15 mm thick incl dubbing coat where required to match with the existing thickness in CM 1:4 and hacking clearly the edges and corners smooth and rounded for new plastered including formwork/scaffolding work upto height 3.5mtr above ground level of bldg complete all as specified.
Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.
Taking down eaves gutters and PVC(SWR) pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed.
110 mm dia PVC (SWR) Type-B pipes single socketed in any length with rubber ring joint laid in trenches or in floor all as specified and directed.
110 mm dia PVC (SWR) Type-B pipes single socketed in any length with rubber ring joint fixed to wall with PVC//MS holder clamp all as specified and directed
S&F 75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joint laid intrenches or in floor all as specified and directed
75mm bore PVC SWR Type-B pipes single socket in any length with rubber joint fixed to wall with PVC//MS holder clamp etc complete all as specified and as directed
PVC SWR reducer 110mm to 75 mm complete all as specified and as directed.
PVC SWR vent cowl 75 mm complete all as specified and as directed.
PVC (SWR) bend 110 mm dia any radius all as specified and directed
PVC (SWR) junction single (single T) equal or unequal provided with access door 110 mm dia all as specified and directed.
PVC (SWR) bend 75 mm dia any radius all as specified and directed.
PVC (SWR) 75 mm dia floor trap plain with grating including jointing with solvent cement fixed in repairs, all as specified and directed.
PVC (SWR) junction single (single T) equal or unequal 75 mm dia all as specified and directed
Disconnecting existing tanks of any description n.exc 1000 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, (cleaning repairing, etc. measured separately), complete all as specified and as directed.
Disconnecting existing tanks of any description exceeding 1000 ltr and n.exc 2000 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, (cleaning repairing, etc. measured separately), complete all as specified and as directed.
Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) three layered hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed.
Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified.
Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed.
Description all as per srl Item No-31 above, but 20 mm bore.
Mild steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
Mild steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
20 mm dia bore gun metal globe or gate valve with iron wheel head screwed both end for iron pipe fixed in repairs complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for Reinforcement cut as required to facilitate demolition complete all as specified and directed.
Reinforced cement concrete (Nominal mix), type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste of necessary form work complete all as specified and as directed.
Rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 410W(Gde E-250), quality 'A' complete all as specified and as directed.
Formwork to sides and soffits/faccia of floor or roof beams, beam haunchings, girders, bressummers, lintels, chajja, cantilevers, shelves including sup- ports, overhangs, etc. complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) all as specified and directed.
Taking down of shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each complete all as specified and as directed.
Steel windows/ventilator (Box type) factory made glass/glazed shutter, (glass panes window shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 8mm square bar grills complete all as specified & as shown on drg No. CEUZ/TD/1302/2009 Sh No 1/1 to 1/3 .
-Ditto- all as per item No 43 above but without glazing bars and without grill/guard bar.
Pressed steel frames of sizes 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia threshold bar and filling hollow of frame,all as specified and directed.
M & L Pressed steel frames of sizes 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia threshold bar and filling hollow of frame ,all as specified and directed.
M&L For PCC 1:2:4 type B-0 (Using 12.5 mm graded crushed stone aggregate) as in filling of pressed steel frame.and including 50 mm parapet coping all as specified and directed.
M&L For PCC 1:3:6 type C-1 (Using 20mm graded crushed stone aggregate) for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and as directed.
35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated, complete all as specified.
35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified.
Factory made 30 mm thick ,Flush shutters, solid core construction, with block board core and plywood face panels, one face is commercial and other face is covered with decorative face veneer with lipping/frame to match the surface etc complete all as specified & as directed.
S&F Solid PVC (Door/almirah/cupboard) frames of size 50 x 47mm made out of 5mm dia plain colour PVC Sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing all as specified.
Factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified and directed.
Prelaminated particle board 18/19 thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.
Mild steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified.
250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed.
150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.
Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed
Door closer of aluminium (Die cast body), hydraulically regulated, designation No 3, universal type, suitable for door shutters of size 851mm to 1000mm of width , ISI marked fixed in repairs, complete all as specified and as directed.
Aluminium mortic lock (4 levers) 100 mm long vertical type fixed in repairs, complete all as specified and as directed.
300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, fixed in repairs complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames/Aluminium frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.
3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.
3 mm thick sheet glass figured (frosted), ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.
Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples fixed in repairs, complete all as specified and directed.
Preparation of new steel surfaces of any description exc 10 cm width or girth, priming with red oxide primer and painting with two coats of synthetic enamel paint complete all as specified and directed.
Preparation of new untreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.
Demolition of brick work or stone masonary built in cement mortar including all quions, arches , pillars etc. complete all as specified and directed.
Brick work with sub class 'B' bricks , straight or curved on plan exc. 6 mtr mean radius built in CM 1:6 complete all as specified and directed.
Rendering 15mm thick cement plaster with cement mortar(1:4) on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.
Rendering 15 mm thick cement plaster with cement mortar(1:6) on other than fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified
Rendering 10 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.
Preparation of old surfaces and applying two coat of cement base paint to walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efforescent salts and removing oil and greasy spots all as specified and as directed.
Applying 3mm thick wall care putty on old/newly plastered surfaces of wall and prepere to receive painting complete all as specified and directed.
Preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.
Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper including one coat of alkali resistant primer complete all as specified and as directed.
Preparation of newly plastered surfaces of wall and applying two coats of cement based paint on walls over & including one coat of alkali resistant primer, complete all as specified.
Preparation by washing, rubbing down and stopping of old distempered surfaces and applying one coat of distemper oil emulsion to walls complete all as specified and directed.
Preparation of old painted surfaces by washing, rubbing down and stopping of plastered surfaces and applying one coats of cement base paint white or tined on wall complete all as specified and as directed.
Preparation of old plastered surfaces of ceiling and apply one coat of white wash, complete all as specified and as directed.
Preparation of old painted surfaces with complete removal of existing treatment & applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall complete all as specified and directed.
Preparation of newly plastered surfaces & applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall, complete all as specified and directed. Note for item No-22 & 23:- (i) The work shall be carried out in different shade and the same shall be got approved from Engineer-in-charge/GE/ (ii) The work shall be carried out upto 4th storey of bldgs and no extra payment shall be admissible for necessary form work & scaffolding required for the same.
Preparation of old steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparation of old wooden surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Writing letters or figures ( Block , Roman, Italic or Indian ) n exc 30 cm high complete all as specified.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises, complete all as specified.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed.
Description all as per srl Item No-24 above, but item but in skirting over and including 10 mm thick rendering in CM 1:4
Glazed ceramic tiles 450 x 300 x 7mm thick / 350 x 250 x 7mm thick (coloured) on vertical surfaces such as skirtings, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each and removing from site, complete all as specified and directed
PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe etc. fixed in repairs, complete all as specified and as directed.
Vitreous china squatting pan "Orissa Pattern" size 580 x 440 mm in white colour with integral foot rest incl lime mortor, 'S' trap fixed in repairs complete all as specified and directed. Cat Part No-20042 (ORISSA PAN (ECO)) of Hindware or equivalent cat part of make specified in list make as approved by GE.
Repair vitreous china wash down water closet pan (Pedestal Pattern) white (excluding flushing cistern and pipe) complete all as specified and as directed.
Bib taps (Long body) for 15mm bore dia of pipe, fancy type chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed. Cat Part No-CON-107KN of Jaquar or its equivalent cat part of make specified in list make, as approved by GE.
Plastic water closet seat cover white in colour closed pattern with flat bottom and mild steel chromium plated or aluminium hinging devices, complete all as specified and directed.
Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15mm complete, all as specified & directed.
PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore fixed in repairs, complete all as specified and as directed.
M/s Vishwakarma Enterprises (BID ID -3326834)
Ankush Gupta (BID ID -3328289)
LAL CONSTRUCTIONS (BID ID -3320011)
harish kumar and co (BID ID -3318679)
M/S RSJ BUILDER AND SUPPLIERS (BID ID -3318742)
bushan kumar (BID ID -3326239)
M/S KARAN SINGH CONTRACTOR (BID ID -3327802)
M/s Rajesh Kumar Contractor (BID ID -3327417)
M/S JEEVAN LAL SHARMA (BID ID -3320019)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .