Providing Civil Work of Arignar Anna Silk Co-Operative Shopping Complex at Door No.72 Vallal Patchaiyppan Street, Kancheepuram District under Handloom support Programe Saving Fund -2020-21- FY 2024-25

Amount

Labour charges for removal of existing rolling shutters etc. completed

Dismantiling, clearing away Brick/ stone masonry in cm walls under 3m high and carefully stacking mateials useful for e-use for any thickness of walls etc. complete

Dismantling RCC by manual/ by using deploying machineries, clearing away and carefully stacking materials usefulfor re-use for any thickness of walls etc. complete

Clean removal of cement plaster from walls etc. somplete

Removing Existing truss work like vertical post, Horizontal and Distribution section inclding sheet etc. complete

Chipping of concrete and roughening the surface etc. complete

Dismantling, clearing away floor finish and dadooing walls in cm with mosaictiles/ glazed tiles/ clay tiles/ cuddapah slabs and carefully stacking materials useful for re-use for any thickness of walls etc. complete

Dismantling of Existing False ceiling, wall paneling, partition, glass panels, electrical wiring and light fittings including hire charges of power hammer and tools and plants and all labour charges for removing debris from the site

Injecting Antiterminite Treatment work wit suitable chemical for internal entire walls and ceilings including mixing proportion as per instructed by departmental officer and manufacturers specification etc, complete

Supply and fixing of 3.6 mm thick 140mm x 150mm hollow square MS Pipe of approved quality with necessary bolts, clamps screwes etc, all complete complying with relevant standard specification and as directed by the departmental officers

supply and fixing of 1no 12mm thick base plate, 4nos of 10mm thick gusset plate and4nos of anchor fastenerof approved quality with necessary bolts, clamps screwes etc, all complete complying with relevant standard specification and as directed by the departmental officers

Supplying and fixing of 2.6 mm thick 50mmx50mm hollow square MS pipe of approved quality with necessary bolts, clamps screwes etc.., all complete complying with relevant standard specification and as directed by the departmental officers

Roofing with best quality Zinc Chromate aluminium decorated 0.47mm thick sheet of approved quality with necessary bolts, screwes etc, all complete complying with relevant standard specification and as directed by the departmental officers

Earthwork excavation in all stiff clay, stiff black cotton, shales, murram, gravel, stoney earth and earth mixed with small size boulders and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and leveling the site with an initial lead of 10 metre and lifts as specidied hereunder etc, all complete in all respets complying with relevant standard specification )excluding refilling) 0 to 2m depth

Providing single under reamed augur piles of 300mm dia to depth of 2.4m in RCC 1:1.5:3 ( One of Cement one and half of Msand and three of stone jelly ) using 20mm hard broken stone jelly excluding cost and fabrication of reinforcement but including auguring in all soils and sub soils hire charges for machineries labour charges for engaging laying concrete boiling out water wherever necessary vibrating curing etc,, complete complying with standard specification and as directed by the departmental officers

Plain Cement Concrete in CC 1:5:10using 40mm HBGmetal (one cement, Five sand, ten HBG)for foundation and basement including dewatering if found necessary and laid in layers not more than 15cm thick etc complete complying with standard specificatio and as directed by the departmental officers

Reinforced Cement Concrete in CC 1:11/2 : 3 using 2mm HNG metal(one cement, one and half Msand, Three HBG Metal) for all Rcc works such as slabs, beams, footings, staircase waist slab, steps, landing beams, fins, boxing, Vertical louver, drops, window sill slabs projection and other similar works including curing etc complete complying with standard specification and as directed by the departmental officers.

Existing Compound Wall

Column

Supplying and ercting centering and soffits including necessary supports and strutting up to 3.29m height for plain surfaaces as detailed below in all floors with cross bracing using mild steel sheets of size 90x60cmand 10BG stiffened with welded mild steel angle of size 25mmx25mmx3mm for boarding laid over silver oak joists of size 10cmx6.50cm spaced at about 90cm centre and supported by casurina props of 10cm to 13cm dia spaced at not more than 75 cm centre to centre etc, complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid)

For Plains surfaces such as square& rectangular columns, top & bottom slab, all sunshades, facia fins, drops etc..

For Column footing & plinth beam, bed blocks, template, staircase, steps piers, raft beam, raft slab etc

Supplying, fabricating and placed un position mild steel/ Ribbed tor steel grills for all RCC works as per design given includin cost of steel and GI binding wire in all floors etc. complete, (Contractor has to make his own arrangements for the supply of steel and binder wire)

Brick Masonry in cement mortar 1:5 (one cement and five sand ) in foundations, basement and superstructure walls usin gsecond class ground moulded chamber burnt bricks of size 9"x4 3/4"x2 3/4 etc, complete complying with standrd specification and as directed by the departmental officers

Plastering the walls with cement mortar 1:5 of 12mm thick using the river sand including curing and finishing neartly etc complete complying with standard specification and as directed by the departmental officers

Painting the new walls two coats with best approved quality weather shield exterior emulsion paint over one coat of primer including cost of brushes, emulsion paints scaffolding curing etc, complete in all respects complying with relevant standard specification and as directed by the departmental officers. (The quality and shade of paint should be got approved by the executive engineer before use)

Providing floor finishing 20mm thick with CM 1:3 using jelly and river sand including rubbing the top surface smoothly threadlining if found necessary and curing etc, over base concrete in platform, carparking etc, all complete complying with relevant standard specifications and as directed by the departmental officers

Brick Partition wall in cement mortor 1:4 (One of cement and four of Msand ) using camber burnt second class stock bricks of size 9"x4 3/8" x2 3/4" having minimum average crushing strength of 50 Kg/sqcm in Third floor including dewatering wherever necessary proper setting curing etc,

Supply and fixing UPVC (Un-Plasticized Polyvinyl chloride) louvered Ventilators of from the profile the size of outher frame 60mm x 58mm and shutte profile size of 60x78mm both profiles are reinforced with GI/1mm 125 GSM and 100% corrosion free, the profileare multi chambered sections with wall thick 2mm. The EPDM rubber (black colour) covered with all over thhe edges of frame and shutter. The corners and jointts should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineeer before use on

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).

Construction of Inspection chamber Of following size with brick jelly concrete 1:8:16 (one of cement eight of sand and sixteen of broken brick jelly using 40mm gauge broken brick jelly 15cm thick for foundation and 23cm thick brick masonry in C.M. 1:5 (One of cement and five of sand) using stock bricks of size 9" x 4 3/8" x 2 3/4" plastering with cement mortar 1:3 (One of cement and three of sand) 12mm thick on both sides top and bottom including earth work excavation RCC 1:2:4 (One of cement two of sand and four of 20mm gauge hard broken stone) 5cm thick precast cover slab with nominal reinforcement, moulding, fixing in position etc., complete complying with relevant standard specifications and as directed by the departmental officers.

a)60x60x60cms

b)60x60x60cms

c)60x60x60cms

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

R.BABU (BID ID -1191425)