Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹41.6 LAdmitted-Finance | -0.90% | ₹41.6 L | L1 | Admitted-Finance |
| 2 | L2₹41.7 L+₹12,179.75 (0.29%)Admitted-Finance | -0.61% | ₹41.7 L+₹12,179.75 (0.29%) | L2 | Admitted-Finance |
| 3 | L3₹41.9 L+₹31,499.36 (0.76%)Admitted-Finance | -0.15% | ₹41.9 L+₹31,499.36 (0.76%) | L3 | Admitted-Finance |
Tender Value
₹42.0 L
EMD Value
₹42,000
Closing Date
9 Jun 2026, 3:00 pmClosed
SUPERINTENDING ENGINEER (CIVIL)
SUPERINTENDING ENGINEER (CIVIL), MEERUT
Work of Installing Fire Fighting System at the Electricity Store Centre, Partapur Distt- Meerut
2026_PVVNL_1151406_1
14/ECDC/MRT/2026-27
Open Tender
Civil Works
Percentage
120 days
MEERUT
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
PLEASE GO TO THE TENDER NOTICE
₹42,000
25 Jul 2026
22 May 2026
10 Jun 2026
22 May 2026
9 Jun 2026
22 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Complete design & drawing of Fire Fighting System at Store Centre By Authorised Designer as per site Requirments direction of E/I & guide lines provided by CPWD General sepecification of works part-V (Wet Riser & sprinkler system) 2020. NSI | 1 | Job | 15,000 | ₹15,000 |
| - | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : For 80mm Dia.(DSR 18.7.6) (Electrical E&M) | 15 | RM | 1,460.88 | ₹21,913.2 |
| - | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : For 100mm Dia.(DSR 18.7.7) (Electrical E&M) | 110 | RM | 1,980.13 | ₹2,17,814.3 |
| - | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : For 150mm Dia. (DSR 18.7.8) (Electrical E&M) | 50 | RM | 2,769.85 | ₹1,38,492.5 |
| - | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 200 mm. dia (wall thickness = 6.3 mm). DSR (18.6.1) (Electrical E&M) | 10 | RM | 4,309.78 | ₹43,097.8 |
| - | Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. DSR (17.1.1) (Electrical E&M) | 1 | No | 830.02 | ₹830.02 |
| - | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. DSR Code 17.2.1 | 1 | Nos | 4,833.69 | ₹4,833.69 |
| - | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate DSR Code 11.3.1 | 10 | Sqm | 455.66 | ₹4,556.6 |
| - | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White DSR Code 17.18.1 | 1 | Nos | 883.31 | ₹883.31 |
| - | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. DSR Code 17.7.4 | 1 | Nos | 1,394.12 | ₹1,394.12 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.67 MB
SATANDEREDTENDERDOCUMENT.pdf
Tender Documents • 0.61 MB
06TO60PQC.pdf
Additional Documents • 3.33 MB
BOQ_2156707.xls
BOQ • 0.48 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .