Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹4.1 L
EMD Value
₹8,200
Closing Date
18 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Providing Renovation Works to Vigilance Department of Industrial Health Center IHC, HAL Bangalore
9537
TENDER NOTICE/NCP/24/24-25/03
Works
Contract Section Civil-FMD-Bangalore
₹0
₹8,200
18 Sept 2024
29 Aug 2024
29 Aug 2024
18 Sept 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the engineer-in-charge.
Taking out old serviceable glass of any description from old wooden or metal frames or stone / concrete or bricks surrounds any thickness or size, hacking out old putty or removing beeds etc., including making good breakages in taking out and handling removing to stores or stocking for re use etc., all complete as directed by Engineer-in-Charge.
Dismantling of flushing cistern and water closet of all types and sizes (C.I./PVC/Vitroeous China/ urinlas/ IWC/ EWC/ hand wash basin) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead etc., all complete as directed by Engineer-in-Charge.
Dismantling tile work For thickness of tiles 10 mm to 25 mm in floors and roofs / walls laid in cement mortar including stacking material within 50 metres lead etc., all complete as directed by Engineer-in-Charge.
Taking down cement / lime palstering of any desription on brick walls inlcuding raking out joints, scrubbing etc., all complete as directed by Engineer-in-Charge
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-Charge
Cement mortar (1:6) plastering 20mm thick for brick/concrete surfaces, finished smooth with trowel including lime rendering for interior faces of walls surfaces including scaffolding, curing etc., all complete as directed by Engineer-in-Charge.
Providing and laying Glazed Vitrified tiles Matt/Antiskid in floor (thickness to be specified by the manufacturer) of size around 600mm x 600 mm with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade etc., all complete as directed by Engineer-in-Charge.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., all complete as directed by Engineer-in-Charge.
Providing and laying flamed finish Granite stone flooring using Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent in required design and patterns,in linear as well as curvilinear portions of the building all Complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Dismantling doors, windows and clerestory windows (steel or wood) of area 3 sq. metres and below shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead etc., all complete as directed by Engineer-in-Charge.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete etc., all complete as directed by Engineer-in-Charge.
Wall painting with 2 coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour etc., all complete as directed by Engineer-in-Charge.
Painting with Synthetic Enamel paint of approved brand/MAKE and manufacture of required colour to give an even shade for wooden / steel/ concrete surface of one or more coats on old work and making the good surface etc., complete as directed by Engineer-in-charge.
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid etc., all complete as directed by Engineer-in-Charge.
Providing and fixing wash basin white vitreous china wash basin of size 630x450mm with pedestal completel recessed at the back for reception of pipes and fittings including C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms an all complete including necessary fittings and fixtures etc., all complete as directed by Engineer-in-Charge.
Supplying & Fixing of C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 grams for 15mm dia bore etc., all complete as directed by Engineer-in-Charge.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20 mm pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Same as above but 15mm dia bore
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms etc., all complete as directed by Engineer-in-Charge.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms etc., all complete as directed by Engineer-in-Charge.
Supplying & Fixing of oval shape of size 450mm x350mm outer mirror superior qulaity and of rectanguler shape an dsize with plastic moulded frame of approved make and shade with 6mm thick hard board backing etc., all complete as directed by Engineer-in-Charge.
Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of Engineer-in-Charge.
Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of Engineer-in-Charge.
Providing and fixing chromium plated brass butt hinges 100x70x4 mm (ordinary type) with necessary chromium plated brass screws etc., all complete as directed by Engineer-in-Charge.
Providing and fixing ISI marked oxidised M.S. sliding door bolts (Copper oxidized as per IS 1378) 250 x 16mm with nuts and screws etc., all complete as directed by Engineer-in-Charge.
Providing and fixing ISI marked oxidised M.S. tower bolt black finish (Copper oxidized as per IS : 1378) 150 x 10 mm, Barrel type with necessary screws etc., all complete as directed by Engineer-in-Charge.
Providing and fixing bright finished brass handles 125 mm with screws etc., all complete as directed by Engineer-in-Charge.
Rupees Three Lakh Forty Four Thousand Fifty Six and Forty Paise Only
Approximate Amount Put to Tender
Rupees Sixty One Thousand Nine Hundred Thirty and Fifteen Paise Only
Rupees Four Lakh Five Thousand Nine Hundred Eighty Six and Fifty Six Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN24.pdf
TENDER_DOCUMENT • 2.36 MB
44ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
44TB.pdf
TENDER_DOCUMENT • 2.58 MB
44PB.pdf
TENDER_DOCUMENT • 0.31 MB
44Checklist.pdf
TENDER_DOCUMENT • 0.17 MB
44PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
44PBF.xlsm
TENDER_DOCUMENT • 0.03 MB
44PQ.pdf
TENDER_DOCUMENT • 0.21 MB
44Undertaking.pdf
TENDER_DOCUMENT • 0.55 MB
Amendment.pdf
TENDER_DOCUMENT • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .