8804 COMPREHENSIVE REPAIR TO JCOS OR MD ACCOMADATION IN AOR AGE BR I UNDER GE S PUNE

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed for following size of pipe :-

(a) 15mm bore

(b) 20mm bore

(c) 25mm bore

S&F GI tubing "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc. including taking down existing steel tubing of the following sizes :-

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

S & F in repairs gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of following sizes :-

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

S&F in repairs 20 mm bore ball valves suitable for iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed of following sizes complete all as specified and directed.

S&F 20 mm bore ball valves suitable for iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed of following sizes complete all as specified and directed.

Cutting in stone wall for chases, pining in making good to facings where required and painting in in cement mortar 1:3 to ends or edges of landinsgs, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed watter tubing etc and making good , cutting not exc10cm girth as specified and directed.

M & L for Cleaning and removing all dirt and scale etc from tank and from the mouths of circulating pipes for the tanks of following capacity including written of date of cleaning complete . :-

(a) Not exc. 500 Ltrs

(b) Not exc. 1000 Ltrs

(c) Not exc. 2000 Ltrs

S&F, in repairs, PVC water storage tank lid/ cover of 500/1000 litres Capacity including fixed with PVC locking arrangements complete all as specified and as directed

Supply and fix in replacement rotational moulded polyethylene water storage tanks in replacement (vertical cylindrical with closed top) double layered ISI marked with existing inlet, outlets & provision of washouts, (vent pipe all as directed of following capacity including all new tank nipples of suitable size.

S&F in repairs PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall / ceiling or laid in trenches including taking down pipe of following size :

(a) 110 mm bore

(b) 75 mm bore

S&F in repairs PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and as directed.

S&F PVC SWR branch piece, (Double 'Y') equal or unequal of 110 mm bore complete all as specified and as directed.

S&F PVC SWR branch piece, (Double 'Y') equal or unequal of 75 mm bore complete all as specified and as directed.

M&L in replacement for PVC (SWR) gully trap 125/100mm, setting and jointing with solvent cement complete all as specified and as directed

M & L in replacement PVC (SWR) floor trap, dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for 110mm PVC (SWR) WC connector with lip ring complete all as specified and as directed.

M&L for 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed.

M&L for 40 mm bore Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm with and including complete fittings all as specified and directed .

M&L for PCC 1:2:4 type B-0, 25 mm average thickness, levelling course as in padding concrete complete all as specified and as directed

M&L for 300x300x 6 to 7mm thick, non skid, ceramic, coloured tiles, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 15mm thick screed bed in CM 1:6 complete including demolition of existing tiles of any description all as specified & directed by Engr-in-Charge.

M&L glazed coloured digital printed ceramic tiles of size 600 mm x 300mm x 7mm thick in vertical surfaceses etc set qnd jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including 15 mm thick backing coat in CM (1:4) and filleting at top etc complete and including taking down of existing tles of any description etc .

M&L for light shed coloured ceramic tiles 8 to 9 mm thick 600 x 600mm size of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 20 mm thick screed bed in CM 1:6 etc complete as in flooring including demolition of existing tiles of any description etc all as specified and directed.

M&L for 16 to 18 mm thick Granite slab (of any type/colour) work (table rubbed and polished) in steps, pillars;window cills/jamb, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. as counters of any radious etc laid over 20 mm thick screed bed in CM ( 1:4) inclding demolition of existing stone slab of any description

S & F Machine cut cuddappa stone 30 to 40 mm thick one side polished as in kitchen platform and partition wall of slab etc bedded & jointed in CM (1 : 3) including taking down existing stone slab etc complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for but including sunken portion and floor tiles and roof concrete , unreinforced etc all as specified and as directed.

Material and labour Water proofing treatment to sunken slab, walls, etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) Clean the sunken portion of toilet/Baths/WCs/Kitchen thoroughly remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or eqvt). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bath seal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bath seal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bath seal Plus” or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely.

(e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFL. Above FFL, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed 1:3:6 type B0 mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of approved makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' white, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S & F in repair vitreous china wash basin white flat back of size 550 mm x 400 mm including 32 mm dia CP waste coupling long screw , chain and plug and PVC waste pipe including CI brackets, etc. complete in repairs all as specified and directed by Engineer-in-Charge

M&L for providing and fixing CP toilet fitting in repairs as specified and as directed by the Engr -in-Charge for the following:-.

Bib taps CP 15mm bore fancy type with wall flange conforming to CAT No. CON- 037 Jaquar/ 9206 (CASA) pf Prayag or of Equivalent make specified here in after

Soap dish CAT No. ACN-1131N Jaquar/BA-259 of Prayag or of Equivalent make specified here in after

Health faucet CAT No. ALD-583KN of Jaquar/ BEA-85 all as specified here in after

S&F in repair Angular type stop cock conforming to CAT No. 053 of Jaquar/ 9210 of Prayag specified here in after

S&F 2 way bib cock with wall flange conforming to CAT No. CON 041N of Jaquar specified here in after

S&F for Brass chromium plated shower rose 100 dia with 235 mm long arm with or without swivel joints, including fixing to steel pipe or union Jaquar" all as specified and directed by Engr-in-Charge

S&F in repairs Pillar taps long neck with aerator CAT No CON -021KN screwed for iron pipe and fixed

S&F in repairs satinless steel Robe Hook (khuti) with 5 Hook complete.

S&F in repair Sink Cock with swinging casted spout with aerator conforming to CAT No. SQN - 522KN of Jaquar specified here in after

S&F 16 to 18 mm thick garanite coner shelf in bathroom and toilets round (9" x 9" ) with satinless steel complete all as specified and as directed

S&F 100 mm round Stainless steel Grating with waste hole complete all as specified and as directed.

S&F 100 mm round Stainless steel Grating complete all as specified and as directed.

S & F in repaie PVC connections 15 mm size with PTMT nuts of length 600 mm ( hot and cold water .) all as specified and directed.

S & F in repairs PVC flexible waste pipe 32mm bore complete all as specified and as directed

M&L for old size fly ash bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as spd and as directed including demolition of brick / stone wall etc.

M&L for frame work such as grills guard bars,barred iron doors , ladders railing , gratings,etc end bars shouldered and /or riveted and similar work con-forming to Fe 290.Gde -E-165.complete all as specified and as directed

S&F stainless steel channels 22/24 inch for kitchen drawer complete all as specified and directed . (Make : Hettich )

Cutting in brick / stone wall exc half brick but n. exc one brick in built in cement mortar or cement lime mortar and stone walls for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed

M&L for rendering 30 mm thick in two layers on stone masonry surfaces or on other than fair faces of brick/PCC block masonry of walls (first layer 20 mm thick in cement mortar 1:6 and second layer 10 mm thick in CM 1:6 and finishing the surface even and smooth without using extra cement including Neeru finish to plastering taking down cement plaster on stone walls etc including racking out joints , hacking for keys , scrubbing down with water complete all as specified and directed.

M&L for rendering 30 mm thick in two layers on stone masonry surfaces or on other than fair faces of brick/PCC block masonry of walls (first layer 15 mm thick in cement mortar 1:6 and second layer 10 mm thick in CM 1:4 mixed with WPC 3% by wt of cement) and finishing the surface even and smooth including sogal finish using extra cement complete and inluding taking down cement plaster on stone walls etc including racking out joints , hacking for keys , scrubbing down with water complete all as specified and directed. Note :- Supply only WPC shall be measured and paid separately under respective item and complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement .( WPC shall measured and paid sepretally) complete all as specified and as directed

Supply only Integral waterproofing compound

M&L for preparatio of new plastered surface of wall and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. complete all as specified and as directed.

M & L for preparation of surface of any description new plastered , over 10 cm width or girth including and applying two coats of cement base paint over a coat of primer all as specified and directed.

M&L cement concrete type B0 1:2:4 using (12.5 mm graded aggregate) , as in roof kerbs , rounded chamfered on edges , in lintel upto 1.5 m clear span, cill, steps, seismic and other similar bands, plinth courses string courses, lacing courses , copings kneelers, apex including weathering , slightly rounded or chemfered angles and throating etc. necessary form work complete all as specified and as directed

M&L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded aggregate)as in flooring/ Plinth protection Finish even & smooth with extra cement complete.

S& F Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door and sliding bolt fittings (exclusive of steel sheeting or other covering, ) and hanging; also fastening and fixing complete (FE -410-W, Gde E -250 quality -A )

S&F Mild steel, plain, black sheet 1.60 mm thick in Door frame cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed on steel framing with with riveted or welded seams, including bending or turning up, mitred all as specified and dircetd .

Taking down shutters of any description exc 1 sqm but not exc 2 sq m each complete all as specified and as directed

Taking down /cutting steel windows shutter by means of gas cutter w/o disturbing of sofit/jambs/cills etc of any description n exc 1.5 sqm (without taking off guard bar) complete all as specified and as directed.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36 mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

Taking down Chowkats or frames n. exc 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed

Taking down Chowkats or frames exc 1.5 Sqm but n. exc 4 sqm each (Without taking off shutters from the frames) complete all as specified and directed

S&F Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Squre tube, suppling & fixing in opening as per SSR Pt-I specificied and drawing complete all as specified and as directed

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles plain colour PVC sheet for top rail , lock rail & bottom rail either side & as gap isert for top rail & bottom rail, . Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/sealed to the stiles & rails wit sutable PVC beading and jointed together with solvent cement ,suppling and fixing in the frame at site as per SSR Pt-I specification & drawing

S & F of pressed steel frames of size (125 X 60mm) for doors with one or more rebates including necessary lugs, hinges, lock strikes plate including M & L for providing PCC type B-0 ,1:2:4(using 12.5 mm graded stone aggregate) to fill up the hallow portion of the frame including making good the distrubed surface complete all as specified and directed by Engr -in- Charge.

S & F of pressed steel frames of size (105 X 60mm) for doors with one or more rebates including necessary lugs, hinges, lock strikes plate including M & L for providing PCC type B-0 ,1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hallow portion of frame including making good the distrubed surface complete all as specified and directed by Engr -in- Charge.

S&F for 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces with lapping / farme to match complete all as specified.

S&F for 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces is coverde with decorative face 0.9 mm thick veneer with lapping all around of the shutter / frame to match complete all as specified.

S&F for 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and as directed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

S&F of 18/19 mm thick Blolck BOARD , grade I quality exterior grade type with decorative face 0.9 mm thick decorative type veneer on both faces including lapping of edges fixed with screws to timber frame work as in CB partition and shelf and other works complete including dismantling of existing boarding all as spd and as directed

S&F 300 mm long stainless steel sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section ISI marked complete all as specified and directed.

S& F 200 mm long Stainless steel barrel tower bolts, all as specified and directed .

S&F 150 mm Extruded stainless steel handles, fabricated type, anodised all as specified and directed

S&F 150 mm long Extruded Aluminium alloy handles, caste type anodised ISI marked complete all as specified and directed.

S&F 100 mm long extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed, type C-21 complete all as specified and as directed.

S&F 100 mm long hinges heavy weight , cold rolled mild steel and fixed complete all as specified and as directed.

S&F 150 mm size Hasp staple Aluminium anodised with mild steel hinges pin including bolt to hinges plate fixed with screw. complete all as specified and directed.

S&F 100 mm stainless steel handle for kitchen cabinet and drawer complete all as specified and directed .

S&F continuous Piano hinges, mild steel bright finished or electro galvanised width of flap 30 mm complete all as specified and as directed

S&F of Magnet catches and striking plate complete all as specified and as directed

S & F in repair 20 mm dia Alu.poweder coated curtain rods with fixing fancy type including bracket , stops , latoo etc fixed in repairs including taking down old one all as specified and directed by Engineer-In-Charge.

Removing of building / demolished materials & debries etc. to a distance more than 5 Km beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

M&L Preparation of Old painted Steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of Synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden surfaces exe 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new wooden surfaces exe 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer all as specified and directed

M&L Preparation of new Steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of primer complete all as specified and directed

S&F in repair of door stopper of aluminium alloy body and anodised tongue with hard drawn steel spring, overall length of cover plate is 150mm complete all as specified and as directed

S & F roof sheeting prepainted galvalume aluminium zinc coating 150 gms GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed including dismantling of old AC sheet .

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified incl dismantling of old sheet complete all as specified and as directed

S&F 1.25 mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings incl welding and solding joint and incl dismantling old gutter (length and girth as fixed) complete all as specified and as directed

Dismantiling structural steel work including doors,gates but excluding framed trusses etc complete all as specified and as directed.

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete as directed.

M&L for preparation of old decorative surfaces of wall incl, cornices (plastered or unplastered) of any description, sand papered , and dusted incl complete removal of existing surface of wall and applying two coats of Oil Bound distemper over coat of 2 mm thck wall care putty complete all as specified and directed.

M&L for preparation of old decorative surfaces of ceiling incl, cornices (plastered or unplastered) of any description, sand papered , and dusted and applying two coats of Oil Bound distemper over 2 mm thick wall putty amke smooth surface complete all as specified and directed.

S&F false ceiling with 9 to 9.5mm thick glass fibre reinforced Gypsum ceiling tiles of size 595 X 595 mm ,prima fine fissured micro look white coloured laid over including grid work 600 x 600mm using GI powder coated “T:” section grid as Main 'T' 38 X25 mm , cross 'T" 25x25mm and wall angle 25x25mm grid and 16 gauge dia GI suspension wire up to 1.5 mrt etc complete all as specified and directed including taking exsiting false ceiling/ lining etc Make-Saint-Gobain, Armstrong,Diamond .

Hacking out old broken glass ( any thickness, size, quality or description from wooden/iron frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3mm thick glass ordinary and quality and glazing with oil putty or wooden bedding all as specified not exc 0.5 sqm in each pane complete all as specified and as directed

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden bedding all as specified n. exc 0.5 sqm in each pane complete all as specified and as directed

Please Enable Macros to View BoQ information