MMNPPNA_23_24_247 (i) Construction of Moranhat Station Feeder Road as Gaurab Path, (ii) Construction Widening of Krishna Sharma Road, (iii) Construction of Lengdon Bye Lane under Mukhya Mantrir Nagariya Pakipath Nirman Achani (MMNPPNA) for the year

Amount

(i) - Construction of Moranhat Station Feeder Road (Ch.0.00 M to Ch.300.00 M) Construction of Footpath as per Drawing and Technical specification

Providing,fitting and fixing in position of Ornamental Iron Grill at Footpath as directed by Engineer in Charge.

Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204

Painting on Concrete/Steel Surfaces with Epoxy Painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701

Providing,fitting and fixing chequred precast cement concrete tiles 22mm thick in footpath and courtyards jointed with neat cement slurry mixed with pigment to match the shade of the tiles,including rubbing and cleaning etc. complete on 20mm thick bed of cement morter 1:4 (1 cement : 4 Coarse Sand) (Rate as per Annexure- III) (Rate Inclusive of 12% GST and 1% LW Cess)

Supplying & installation of Antique design Street Light for Gaurab Path through both sides of the road with underground cabling (Considering 25m pole to pole distance for 1000m) (Rate as per Annexure-IV) (Rate Inclusive of 12% GST and 1% LW Cess)

Planting of Trees and their Maintenance for three Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trenches, watering ,fixing the tree guatrd and maintaining the plants for three year.

Shifting and placing of existing Electric Transformer

Providing and fixing of semi Retro-Reflective cautionary, mandatory & informatory sign board as per IRC: 67 made of 1.5 mm thick MS Sheet duly stove white colour on back with red reflective border of 65 mm width and required letters and figure with reflective tape engineering grade as per clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47 x mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 x 450 x 600 mm below ground level as per approved drawing Clause 1701.2.2 (ii) 60cm equilateral traingle

Providing and fixing of semi Retro-Reflective cautionary, mandatory & informatory sign board as per IRC: 67 made of 1.5 mm thick MS Sheet duly stove white colour on back with red reflective border of 65 mm width and required letters and figure with reflective tape engineering grade as per clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47 x mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 x 450 x 600 mm below ground level as per approved drawing Clause 1701.2.2 (iii) 60cm circular

Providing and fixing of semi Retro-Reflective cautionary, mandatory & informatory sign board as per IRC: 67 made of 1.5 mm thick MS Sheet duly stove white colour on back with red reflective border of 65 mm width and required letters and figure with reflective tape engineering grade as per clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47 x mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 x 450 x 600 mm below ground level as per approved drawing Clause 1701.2.2 (iv) 80cmm x 60 cm rectangular

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’s fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

Providing ‘Sparkle Solar Road Studs, manufactured by Tata B.P. Solar India Ltd. Of size (125mmx125mm), 90mm height (from bottom of shank to the top of stud) with detachable battery, m6LEDs-three on each side for Bi-directional studs/3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25 gms, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance fro one year from the date of installation of stud on road-(installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician). a) Bi-directional Stud.

Providing metal tubular delineator (50mm dia and 1.25mm thick) with 15cm reflector made of heigh intensity grade retro reflectorised sheeting around the pipe at top covered with wire mesh of 20cm length with two nos of similar reflective bands and bottom fastener M.S. angle including firmly fixing the delineator to the ground by means of CC(M-15) foundation of size-(25cmx25cmx25cm), 25cm below ground to the true line and level as directed by the deptt. With six months replacement warranty and free maintenance.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications

(ii) Construction and Widening of Krishna Sharma Path (Ch.0.00m to Ch.340.00m) Dismantling Brick/Tile Work Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and per Technical Specification Clause 202.stacking the serviceable material with all lift and lead of 1000 m as

Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting wild vegetation, grass,bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. By Manual Means

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting p g to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause For Gr.II Materials

WBM Gr.-II Using stone screening Type-B. 11.2mm for Gr.-III. Water Bound Macadam (Providing laying spreading and compacting stone aggregate of specific sizes to water bound macadam specification including spreading in uniform thickness, hard packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming stone screening to fillup the interstices of coarse aggregate watering and compacting to the reqd. density grading 3 as per Technical Specification clause 405. A. By Manual means (ii) For grading II material

WBM Gr.-III Using stone screening Type-B. 11.2mm for Gr.-III. Water Bound Macadam (Providing laying spreading and compacting stone aggregate of specific sizes to water bound macadam specification including spreading in uniform thickness, hard packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming stone screening to fillup the interstices of coarse aggregate watering and compacting to the reqd. density grading 3 as per Technical Specification clause 405. A. By Manual means (ii) For grading III material

Low Porosity Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Cl.503

Bituminous Macadam (Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a pr( including carriage up to initial lead of 5.0 km from quarry and carriage of mixed materials up to 10.0 Km initial lead from mixing plant ) ( Including cost of testing of materials at site and laboratory as directed by the deptt.) B. (b) With anti stripping agent as per IS:14982( Refer Appendix-5 of MoSRT&H specification) '(i)with 60/70 or VG-30 grade paved bitumen (ii) for Grading-II (19 mm nominal size)

Semi - Dense Bituminous Concrete (Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder@ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. ( including carriage up to initial lead of 5.0 km from quarry and carriage of mixed materials up to 10.0 Km initial lead from mixing plant )( Including cost of testing of materials at site and laboratoryas directed by the deptt.) (C) (a) With rock dust as filler ( refer table 500-9 of MoSRT&H specification) & anti stripping agent as per IS:14982( Refer Appendix 5 of MoSRT&H specification) I)'with 60/70 or VG-30 grade bitumen (ii) for Grading-II (10 mm nominal size)

Construction of RCC Covered Drain Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m,dressing of sides and bottom and backfilling in trenches with excavated suitable materials

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803,1202 & 1203

Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar (From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 A. With crushed stone M-25 Grade

Providing and fixing of semi Retro-Reflective cautionary, mandatory & informatory sign board as per IRC: 67 made of 1.5 mm thick MS Sheet duly stove white colour on back with red reflective border of 65 mm width and required letters and figure with reflective tape engineering grade as per clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47 x mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 x 450 x 600 mm below ground level as per approved drawing Clause 1701.2.2 (ii) 60cm equilateral traingle

Providing and fixing of semi Retro-Reflective cautionary, mandatory & informatory sign board as per IRC: 67 made of 1.5 mm thick MS Sheet duly stove white colour on back with red reflective border of 65 mm width and required letters and figure with reflective tape engineering grade as per clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47 x mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 x 450 x 600 mm below ground level as per approved drawing Clause 1701.2.2 (iii) 60cm circular

Providing and fixing of semi Retro-Reflective cautionary, mandatory & informatory sign board as per IRC: 67 made of 1.5 mm thick MS Sheet duly stove white colour on back with red reflective border of 65 mm width and required letters and figure with reflective tape engineering grade as per clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47 x mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 x 450 x 600 mm below ground level as per approved drawing Clause 1701.2.2 (iv) 80cmm x 60 cm rectangular

Providing and erecting direction and place identification retro-Reflectrorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3 fixed over aluminium sheeting, 2mm thick with area exceeding 0.9sqm fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2 nos. firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’s fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

(iii) Construction of Lengdon Bye Lane (From Ch. 0.00m to Ch. 350.00m) Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.(i) By Manual Means (a) In area of non thorny jungle

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (i) Private Land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (i) Private Land

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (ii) For Grading II Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means For Grading III Material

Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per echnical specification clause 1504 including carriage. a) including Edge block/Edge restraints

Earthwork in excavation for foundation of structures upto 3m depth as per drawing and technical specifications Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (i) Upto 3.00M

PCC M-10 (1:3:6 nominal mix) in levelling course below open foundation of Head walls as per drawings & Technical Specification Clause 1109.(A) With crushed stone

Providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specifications clause 802, 803, 1202 & 1203.(II) P.C.C. M-20 grade(i) nominal mix (1:2:4) (A) With crushed stone

Providing concrete for plain/reinforced concrete in Superstructure complete as per drawing and technical specifications clause 802, 803,804,805,806,807, 1202 & 1203 for height upto 5.00m (II) R.C.C. grade M-25 (A) With crushed stone(i) For height upto 5.00 metre

Supplying fitting and placing TMT bar reinforcement (Fe-415) in superstructure complete as per drawing and technical specification Cl. 1002,1005,1010 and 1202.

Providing weepholes in brick/stone masonry,plain/reinforced cement concrete abutment,wing wall,returnwall with 100mm dia. AC pipes extending through the full width of the structures with slope of 1:20(V:H) towards drawing face complete as per drawing and technical specification Cl. 614,709,1204.3.7

Providing and laying cement concrete wearing course M-30 grade including reinforcement complete as per drawing and Technical specification Cl. 1002,1010 and 120 (A) With crushed stone.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801(i) 600mm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (iii) 600mm circular

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (iv) 800mm x 600mm rectangular

Direction and Place Identification signs upto 0.9 sqm size board A Retro-reflectorised Traffic Signs (I) Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

Dipen Mohan