NIT No. 07 2022 23 Item No.1

Specifications for BOD Incubator with PLC/microprocessor controlled and RFID magnetic lock Temperature Range: · BOD Incubator shall have temperature range of 20 to 40 degree C variable with increment of .1 degree C. · BOD Incubator shall have auto cuff off on heating and cooling temperature Material of construction: · BOD Incubator should have outer body Bacteria-resistant power coating and inner chamber with SS 304 mat finish, with double door facility. · Door should be 3, Dual-pane glass kit heater to avoid moisture. · Minimum of 60mm-80mm non- CFC foamed urethane insulation Design: · BOD Incubator shall have minimum 4 sleeves with anti-inclination function to avoid falling off when shelve is pulled out. Shelves should be made of Acrylic with high quality mesh to support bottles /tubes for routine day to day work. And can accommodate 18 to 20 bottles in a rack of 300-400ml bottles per shelve. · BOD Incubator shall have four caster wheels with two brakes /lock in front wheels. · BOD Incubator should triple door facility with RFID assisted magnetic lock system. · BOD Incubator shall have high, low and door alarm · BOD Incubator shall have large impeller fans, fast temperature rise and fall stable temperature control with good temperature uniformity. Battery Backup: · BOD Incubator shall have display battery back up for temperature display at the time of power failure. Capacity: · BOD Incubator shall have capacity 400 liters. Cooling Gas: · BOD Incubator should be CFC free Uniformity. Display and software: · BOD Incubator shall be PLC based controlled based system with touchscreen input and display. BOD Incubator shall be Microprocessor controlled operate · BOD Incubator shall have touch screen 7.4” to display real time display of parameters temperature, Time, Date, Password protected, Alarm on/off, USB / RS232 port for data transfer. · BOD Incubator have High/Low Alarm Door opening Alarm, Condenser heat alarm, compressor heat alarm, sensor failure alarm, Process complete alarm, power failure alarm. · BOD Incubator should have Temperature Graph in display. · BOD Incubator should have Min-Max feature enabling users to view the minimum and maximum-recorded temperatures on the home screen. This makes it easier to document the minimum and maximum temperatures important at the time of storage any item. · On unlocking/Opening of the incubator it shall record the name of official unlocked/opened the door. · Log of all data and record shall be recorded and can be downloaded. Data Log/ Memory: · Memory storage capacity should be up to 50000 logs with USB transfer in pdf and excel/csv format. Locking Mechanism: · Locking/unlocking through RFID card or by password with touchscreen display. Includes USB port for data retrieval. Warranty: · 3 years Certification: Manufacturer should be USFDA/IEC/150 certified Make : Krish, HV Biomedical, Helmer and Viomatra.

Beyond