Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.9 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹35.3 L+₹6.5 L (22.5%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹54.5 L+₹25.7 L (88.9%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | RAJPATI CONSTRUCTION L3 | PRADEEP TIWARI CONTRACTOR L1 | MODI CORPORATION L2 |
|---|---|---|---|---|---|---|
| 1.00 | Supply installation, testing and commissioning LT Feeder piller board out door type cubicle panel boardsuitable for Each 3 3 phase 4 wire 415 volt 50 hz factory febricated approved CPRI powder coated made sheet and MS ang angle iron 3.15 mm thick CRCA out of 3.1 sectiom 40X40X6mm frame with front and back openable double door system with locking anagement louver and air vent gaket for netural flow of air with conopy, inner compartment made out of 2 mm the CRCA sheet duly compartmentalized for each MCCB of incoming and outgoing with lockable arragement with aluminium bus bar three phase and neutral of capacity of 400 amp marked red, yellow, black and blue inslulators, made of high strength insulated material suitable 1100 voltage all controll PVC wires shall be with 2.5 sq mm multistrand copper conductor and shall be properly bunched, tied, fremuled for proper indication, Panel shall be grouted in PCC foundation complete all as specified and directed with following accessories- | 1 | Each Job | 1,71,100 ₹1,71,100 | 1,80,000 ₹1,80,000 | 1,20,000 ₹1,20,000 Lowest |
| 1.01INCOMING- (a) MCCB 200 Amps microprocessor released 415 Volts. 25 KA, 4 pole-01 No. (b) MCCB 100 Amps microprocessor released 4 pole 415 Volts, 25 KA-2Nos & MCCB 63 Amps with microprocessor based 4 pole 415 Volts, 25 KA -04 Nos (c) Digital type Volt meter 0-500 Voltssquare type with selector switch-01 No. (d) Digital type Ammeter 0-400 Amps square type with selector switch-01 No. (e) Wiring complete with copper wire of suitable size (f) indicator lamp LED type, set of three marked red, yellow & blue-01 Set (g) Cable glands brass of suitable size for cable. Note:- Approval of GE must be obtained for Panel design/drawing and CPRI approval of manufacturer before placing order. | ||||||
| 2.00 | Supply installation, testing and commissioning LT Feeder piller board out door type cubicle panel boardsuitable for Each 3 3 phase 4 wire 415 volt 50 hz factory febricated approved CPRI powder coated made sheet and MS ang angle iron 3.15 mm thick CRCA out of 3.1 sectiom 40X40X6mm frame with front and back openable double door system with locking anagement louver and air vent gaket for netural flow of air with conopy, inner compartment made out of 2 mm the CRCA sheet duly compartmentalized for each MCCB of incoming and outgoing with lockable arragement with aluminium bus bar three phase and neutral of capacity of 400 amp marked red, yellow, black and blue inslulators, made of high strength insulated material suitable 1100 voltage all controll PVC wires shall be with 2.5 sq mm multistrand copper conductor and shall be properly bunched, tied, fremuled for proper indication, Panel shall be grouted in PCC foundation complete all as specified and directed with following accessories- | 1 | Each Job | 2,17,000 ₹2,17,000 | 1,95,000 ₹1,95,000 | 1,30,000 ₹1,30,000 Lowest |
| 2.01INCOMING- (a) MCCB 250 Amps microprocessor released 415 Volts. 25 KA, 4 pole-01 No. OUT GOING (a) MCCB 63 Amps microprocessor released 4 pole 415 Volts, 25 KA- 08Nos & MCB SPN 40 Amps with microprocessor based 3 pole 240 Volts, 10 KA -04 Nos (b) Digital type Volt meter 0-500 Voltssquare type with selector switch-01 No. (c) Digital type Ammeter 0-400 Amps square type with selector switch-01 No. (d) Wiring complete with copper wire of suitable size (e) indicator lamp LED type, set of three marked red, yellow & blue-01 Set (f) Cable glands brass of suitable size for cable. Note:- Approval of GE must be obtained for Panel design/drawing and CPRI approval of manufacturer before placing order | ||||||
| 3.00 | MSL cutting PCC/floor/road and taking out cable and making good, with material as per existing after laying of pipe for cable protection including Cement concrete work in pavement/ hard-standing of frexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less all as specified and directed size of trench not more than 0.30 x 0.30 cm. | 2.5 | cum | 4,780 ₹11,950 | 2,500 ₹6,250 Lowest | 6,000 ₹15,000 |
| 4.00 | Supply and fix in replacement of 50mm dia bore tubes, 'light grade' galvanized, with all fitting and fixed complete to walls/ poles or laid in trenches/ floors for cable protection complete all as specified and directed by Engineer-in-Charge. | 60 | RM | 370 ₹22,200 | 300 ₹18,000 Lowest | 375 ₹22,500 |
| 5.00 | Supply and fix in replacement of 100mm dia bore tubes, 'light grade' galvanized, with all fitting and fixed complete to walls/ poles or laid in trenches/ floors for cable protection complete all as specified and directed by Engineer-in-Charge. | 40 | RM | 901 ₹36,040 | 400 ₹16,000 Lowest | 750 ₹30,000 |
| 6.00 | M&L for outdoor/indoor LT panel board/Capacitor Panels/feeder pillar boxes with welding of front/Back side Job covers, necessary hinges, locking system with 300mm long MS sliding door bolt 16 mm dia, rubber gasket of appropriate size including proper fixing with nuts bolts etc with minor spare parts and spray painting with one coat of synthetic enamel paint outer and inner side with two coat of lime wash on plinth of panel board included connected accessories in any size. | 40 | Job | 991 ₹39,640 | 300 ₹12,000 Lowest | 550 ₹22,000 |
| 7.00 | Supply and fix in replacement of MCCB 630 A ,4 pole ,50 KA (Ics =100% Icu) with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning all as specified and as directed by the Engineer-in-Charge. | 5 | Nos | 31,222 ₹1,56,110 | 16,000 ₹80,000 Lowest | 18,000 ₹90,000 |
| 8.00 | Supply and fix in replacement of MCCB 400 A ,4 pole ,36 KA (Ics =100% Icu) with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning all as specified and as directed by the Engineer-in-Charge. | 8 | Nos | 27,100 ₹2,16,800 | 14,000 ₹1,12,000 Lowest | 14,000 ₹1,12,000 Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
19 May 2026, 6:00 pmClosed
Shri Ankit Goyal, IDSE
GE Dronachal, Dronachal Top, Neori Hills, Bhopal 462038
REPAIR/MAINT OF LT PANEL, LT DISTRIBUTER, LT FEEDER PILLAR BOX, APFC PANELS AND CALIBERATION OF PANELS AND CONNECTED WORKS AT GE DRONACHAL
2026_MES_761291_1
8988/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
BHOPAL
Class-D, Category b (i) and as per NIT documents
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER DRONACHAL
₹80,000
Yes
25 May 2026
21 Apr 2026
21 May 2026
21 Apr 2026
19 May 2026
5 May 2026
21 Apr 2026 - 28 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| - | Supply installation, testing and commissioning LT Feeder piller board out door type cubicle panel boardsuitable for Each 3 3 phase 4 wire 415 volt 50 hz factory febricated approved CPRI powder coated made sheet and MS ang angle iron 3.15 mm thick CRCA out of 3.1 sectiom 40X40X6mm frame with front and back openable double door system with locking anagement louver and air vent gaket for netural flow of air with conopy, inner compartment made out of 2 mm the CRCA sheet duly compartmentalized for each MCCB of incoming and outgoing with lockable arragement with aluminium bus bar three phase and neutral of capacity of 400 amp marked red, yellow, black and blue inslulators, made of high strength insulated material suitable 1100 voltage all controll PVC wires shall be with 2.5 sq mm multistrand copper conductor and shall be properly bunched, tied, fremuled for proper indication, Panel shall be grouted in PCC foundation complete all as specified and directed with following accessories- | - | Each Job | - | - |
| 1.01 | INCOMING- (a) MCCB 200 Amps microprocessor released 415 Volts. 25 KA, 4 pole-01 No.
(b) MCCB 100 Amps microprocessor released 4 pole 415 Volts, 25 KA-2Nos & MCCB 63 Amps with microprocessor based 4 pole 415 Volts, 25 KA -04 Nos
(c) Digital type Volt meter 0-500 Voltssquare type with selector switch-01 No.
(d) Digital type Ammeter 0-400 Amps square type with selector switch-01 No.
(e) Wiring complete with copper wire of suitable size
(f) indicator lamp LED type, set of three marked red, yellow & blue-01 Set
(g) Cable glands brass of suitable size for cable.
Note:- Approval of GE must be obtained for Panel design/drawing and CPRI approval of manufacturer before placing order. | - | - | - | - |
| - | Supply installation, testing and commissioning LT Feeder piller board out door type cubicle panel boardsuitable for Each 3 3 phase 4 wire 415 volt 50 hz factory febricated approved CPRI powder coated made sheet and MS ang angle iron 3.15 mm thick CRCA out of 3.1 sectiom 40X40X6mm frame with front and back openable double door system with locking anagement louver and air vent gaket for netural flow of air with conopy, inner compartment made out of 2 mm the CRCA sheet duly compartmentalized for each MCCB of incoming and outgoing with lockable arragement with aluminium bus bar three phase and neutral of capacity of 400 amp marked red, yellow, black and blue inslulators, made of high strength insulated material suitable 1100 voltage all controll PVC wires shall be with 2.5 sq mm multistrand copper conductor and shall be properly bunched, tied, fremuled for proper indication, Panel shall be grouted in PCC foundation complete all as specified and directed with following accessories- | - | Each Job | - | - |
| - | INCOMING- (a) MCCB 250 Amps microprocessor released 415 Volts. 25 KA, 4 pole-01 No.
OUT GOING
(a) MCCB 63 Amps microprocessor released 4 pole 415 Volts, 25 KA- 08Nos & MCB SPN 40 Amps with microprocessor based 3 pole 240 Volts, 10 KA -04 Nos
(b) Digital type Volt meter 0-500 Voltssquare type with selector switch-01 No.
(c) Digital type Ammeter 0-400 Amps square type with selector switch-01 No.
(d) Wiring complete with copper wire of suitable size
(e) indicator lamp LED type, set of three marked red, yellow & blue-01 Set
(f) Cable glands brass of suitable size for cable.
Note:- Approval of GE must be obtained for Panel design/drawing and CPRI approval of manufacturer before placing order | - | - | - | - |
| - | MSL cutting PCC/floor/road and taking out cable and making good, with material as per existing after laying of pipe for cable protection including Cement concrete work in pavement/ hard-standing of frexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less all as specified and directed size of trench not more than 0.30 x 0.30 cm. | - | cum | - | - |
| - | Supply and fix in replacement of 50mm dia bore tubes, 'light grade' galvanized, with all fitting and fixed complete to walls/ poles or laid in trenches/ floors for cable protection complete all as specified and directed by Engineer-in-Charge. | - | RM | - | - |
| - | Supply and fix in replacement of 100mm dia bore tubes, 'light grade' galvanized, with all fitting and fixed complete to walls/ poles or laid in trenches/ floors for cable protection complete all as specified and directed by Engineer-in-Charge. | - | RM | - | - |
| - | M&L for outdoor/indoor LT panel board/Capacitor Panels/feeder pillar boxes with welding of front/Back side Job covers, necessary hinges, locking system with 300mm long MS sliding door bolt 16 mm dia, rubber gasket of appropriate size including proper fixing with nuts bolts etc with minor spare parts and spray painting with one coat of synthetic enamel paint outer and inner side with two coat of lime wash on plinth of panel board included connected accessories in any size. | - | Job | - | - |
| - | Supply and fix in replacement of MCCB 630 A ,4 pole ,50 KA (Ics =100% Icu) with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning all as specified and as directed by the Engineer-in-Charge. | - | Nos | - | - |
| - | Supply and fix in replacement of MCCB 400 A ,4 pole ,36 KA (Ics =100% Icu) with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning all as specified and as directed by the Engineer-in-Charge. | - | Nos | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.26 MB
GPSC_8988.pdf
Tender Documents • 0.60 MB
PS_8988.pdf
Tender Documents • 0.29 MB
SOC_8988.pdf
Tender Documents • 0.26 MB
BOQ_852749.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .