SPL REPAIR TO ROAD AND PATHWAYS (INCLUDING SHIFTING OF ELEC INFRA) AT SUNJUWAN UNDER GE JAMMU

B/R Portion: - Demolition of cement concrete (unreinforced) in ground floors and pavings any thickness (below or above ground level) and removing unserviceable material exceeding 100 mtr complete all as specified and as directed.

Hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a true surface complete all as specified and as directed.

75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base to floor finishes complete all as specified and as directed.

PCC (1:2:4) type B-0 (using 20mm graded crushed stone aggregate) as in getting proper slope/ covering complete all as specified and as directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

E/M Portion: - Dismantling of concrete poles/ struts of any size and transporting to store and stacking including making good to ground surface area complete all as specified and as directed by Engineer-in-Charge.

Dismantling of cross arm of mild steel channel or angle sections, brackets etc complete and setting aside bracings, supports, clamps and back plates from structural steel sections including dismantling of all nuts, bolts, washers of any size complete all as specified and as directed by Engineer-in-Charge.

Dismantling of LT insulator any size any type from Street light pole of any size complete all as specified and as directed by Engineer-in-Charge.

Dismantling of stay assembly any size any type from Street Light Pole of any size complete all as specified and as directed by Engineer-in-Charge.

Demolition of ACSR conductor after dismantling the ACSR conductor from LT Street Light Pole of any type complete all as specified and as directed by Engineer-in-Charge.