CA NO CWE/CHD-71/2020-21 SPECIAL REPAIR/ REPLACEMENT AGAINST SURVEYED OFF FURNITURE UNDER GE CHANDIGARH

Amount

PART-I WOODEN FURNITURE Chair Easy (FD-281)

Peg Table (FD-277)

Table Writing Medium (FD-275)

Table 900 x 600 x 760 mm without drawer (FD-284)

Chair Dining FD-279

Teapoy Wooden FD-232

Table Centre (FD-274)

Chair Dining Cushioned (FD/E6/MAP/10 (R))

Table Dressing Gents with Mirror (FD-379)

PART-II STEEL FURNITURE Chair Verandah (FD-359)

Table computer 900 x 600 x 750mm (FD/E6/MAP/03)

Teapoy Verandha (FD/E6/MAP/17).

Almirah Large Steel with Shelves (FD-1031)

Table steel 900 x 600 x 760mm with drawer (FD 1008)

Chair Writing MAP (FD/E6/MAP/12)

Chair CBA Cushioned (HFD -2041)

Locker bedside steel (FD 257)

Table Office (Officers) steel FD-1003

Charpoy ply wood top MAP FD/E6/MAP-11/01

Table Dining ORs steel FD 165(R)

Locker Bed side Steel FD-1029

Table Office Clk Steel (FD-1004)

Almirah Steel (Medium)(FD-1032) (i) Steel Almirah (body, shutter, drawer, locker, vertical partitions and shelves) shall be made out of 1mm MS plain black sheet all as shown on drawings. (ii) All joints/welding/fixing shall be done all as shown on drawings and with standard workmanship. (iii) Almirah shall be provided with three way locking device as per ‘Godrej’ pattern .The handle shall be made out of steel chrominium plated as per ‘Godrej’ pattern. Six lever brass lock shall be provided as per Godrej pattern. (iv) One steel chrominium plated handle shall be provided to the drawer. (v) Locker of the almirah shall be provided with locking arrangement operated with handle as per Godrej pattern. (vi) All steel surfaces internally and externally shall be painted with two coats of synthetic enamelled paint (silver grey colour) with spray gun over a coat of zinc chromate steel primer. (vii) The welding joints shall be filed smooth before application of primer. The surface shall be thoroughly cleaned and prepared prior to application of paint . (viii) Rest all as shown on drawing.

Table 900 x 900 x 760mm Steel FD-1009

Table Bed Side (MAP) (FD/E6/MAP/15(R)) (i) Pipe shall be 18mm MS square pipe (18 gauge) black powder coated. (ii) Top and back portion above top of Table bed side shall be of 18mm thick Prelaminated particle board (one side decorative finish shade as approved by GE and other side white balancing lamination ) as specified here-in- before. Standard PVC edging (minimum thickness 1.6mm) shall be provided alround in top and pull out tray. Back of table bed side shall be of 6 mm thick commercial plywood as per IS-303. (iii) Sides and back of drawers shall be provided with 12 mm thick commercial plywood as per IS-303. Bottom of drawer shall be provided with 6 mm thick commercial plywood. (iv) Movement of Pull out tray and drawers shall be made on teak wood runners. One aluminum anodized handle shall be provided to each drawer. (v) Stoppers shall be 2nd class Hard wood (Sal/benteak/Bijasal/Hollock). (vi) Hard rubber/PVC shoe shall be provided to the bottom of each leg. (vii) All exposed surfaces of timber and plywood shall be French polished. (viii) All joints fixing shall be done in accordance with standard workmanship and specifications. (ix) Rest all as shown on drawing.

Hard Bed Steel FD/E6/MAP/18

TP Items. Almirah Steel (Large) 2 Door (TP). (i) Steel Almirah large with 02 doors, 2 locks having 02 lockers inside, for hangging uniforms/ cloths, vertical partition and shelves shall be made out of 1mm MS plain black sheet with two handles of steel chormium plated. (ii) All joints/welding/fixing shall be done all as shown on drawings and with standard workmanship. (iii) Almirah shall be provided with two way locking device as per ‘Godrej’ pattern .The handle shall be made out of steel chrominium plated as per ‘Godrej’ pattern. Six lever brass lock shall be provided as per Godrej pattern. (iv) All steel surfaces internally and externally shall be painted with two coats of synthetic enamelled paint (silver grey colour) with spray gun over a coat of zinc chromate steel primer. (v) The welding joints shall be filed smooth before application of primer. The surface shall be thoroughly cleaned and prepared prior to application of paint .

Chair revolving with Arms high back FD-75

Mattress of size 7'x3'x4'' of foam density 40, covered with good quality cotton cover complete all as specified and approved by GE.

Table Office Clk

Receptable PVC FD/E6/MAP/13

Note. Drgs referred in BOQ are available in the Office of BSO, GE Chandigarh

singh traders

Daya Nand Jindal

M/s Rajesh Kumar Jain