GE(S) BTD TOKEN NO 63 OF 2021-22 PAINTING POLISHING OF WOODEN AND STEEL FURNITURE AT BATHINDA MIL STN UNDER GE(S) BATHINDA

Amount

Preparation of old painted iron & steel surface (externally and internally complete) of Almirah large steel (FD-1031/67(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Almirah large steel (MAP) (FD/E6/MAP/18) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Almirah med steel (FD-1032/243/67(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Book case steel (FD-1028) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface of Bed hard steel (FD/E6/MAP/8)/(FD/E6/MAP/8(R)) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any, filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface of Chair Verandah Offrs (FD/E6/MAP/11) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any, filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Locker steel (FD-1029/257) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Rack 6 Tier steel (FD-1038) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface of Rack Shoe steel (FD/E6/MAP/2(R)) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Rack record steel (1830x760x1905mm) (FD-129(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Rack record steel (915x760x1905mm) (FD-129(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Table office clk steel (FD-1004/381/307/84(M) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of table office clk steel shall be lacquer polished with high gloss finish.

Preparation of old painted iron & steel surface (externally and internally complete) of Table office offre steel (FD-1002/1003/84(M) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of table office offrs steel shall be lacquer polished with high gloss finish.

Preparation of old painted iron & steel surface (externally and internally complete) of Teapoy Verandah (FD/E6/MAP/17) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Teapoy Verandah shall be lacquer polished with high gloss finish.

Preparation of old painted iron & steel surface (externally and internally complete) of Trestle store room steel (FD-1043/86(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed.

M&L for preparation of old wooden polished surface of Almirah Mess Utensil (93(M)) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Bed plywood top (FD246/213) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Book case wooden (FD-45/237) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Chair dinning (FD-279/270/262/228/203) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Chair dinning (FD/MAP-II/05) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Chair Easy (FD-201/229/1108) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Chair writing (FD-280/250) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Chair dinning long back (FD-357) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Chair dining Cushioned (FD/E6/MAP/10(R)/FD/MAP-II/04) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Hand stand with mirror (FD-206/233/361) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Sofa set 4 seater (1+1+1+1) (FD-281/373) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Sofa set 5 seater (3+1+1) (FD-281/373) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Table dining 6 person (FD-239/273/376) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Table dining 8 person (FD-239/273/376) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Table dining 1200x900x760mm (FD/MAP-II/03) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Table bed side (FD-210/248/265/276) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Table 900x600x760mm without drawer (FD-223/284) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

Preparation of old painted iron & steel surface (externally and internally complete) of Table bed side (MAP) (FD/E6/MAP/15,FD/E6/MAP/15(R) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) of approved colour by brush or by spray machine complete all as specified and directed. Note:- Wooden portion of table bed side (MAP) shall be lacquer polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Table 900x600x760mm with drawer (FD-224/283) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Table centre (FD-134/235/274/375) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Table writing (FD-249/268/275) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Table dresssing Gents with mirror (FD-230/379) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Table dresssing Laddies with mirror ( FD-251/378) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Teapoy (FD-232/278/382) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Table 900x900x760mm (FD-88/291) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Table Peg (FD-266/277/384/236) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Side Board (FD-241/371) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Bin linen multipurpose (FD/E6/MAP/09) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M&L for preparation of old wooden polished surface of Stool dressing CB/Cushioned (FD-252/282/374/FD/E6/MAP/14) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying french polish till high gloss finish is achieved complete all as specified and directed.

M/s MAKHAN ENTERPRISES

B K CONTRACTORS