COMPREHENSIVE REPAIR MAINT OF WATER SUPPLY PIPELINES OVERHEAD UG SUMP WITH CONNECTED ITEMS AND ROAD SIDE STREET LIGHTS PERIMETER SECURITY LIGHTS JUNCTION BOXES HIGH MAST LIGHT WITH CONNECTED ITEMS AT AKHNOOR UNDER GE NORTH AKHNOOR

Taking down old/burnt cable of any size and Supply and fixing Aerial bunched cable (AB) LT of size 3 core- x25 sqmm+1-core x 16 sqmm+ 1x25 sqmm for street lights .The 16 sq.mm. phase conductor shall be of aluminium solid round; outer diameter shall be within the limits.• The phase conductor shall be insulated with black weather resistant high-densitypolyethylene (HDPE) suitable to 1100 V insulation. The insulated conductors shall generally conform to the relevant standards.• Conductors: The properties of the aluminium wires before stranding shall be:• Tensile strength not less than 90 N/Sq.mm.• Resistivity at 20 Deg. C not exceeding 0.02845ohm / Sq.mm / m(V) and one bare messenger wire shall be stranded non compacted circular aluminium alloy conductor .all as specified and directed. Make Havells, Gloster,Polycab,KEI Note:- The following hardware fittings and accessories shall be used to install,erect and join the AB cable (i) Suspension clamp with eye hook (ii) Suspension fittings and corresponding eye hook (iii) Dead eye fittinngs (iv) Nylon Tie (v) connectors

Taking down old Unsv street lights and S &F for 90 watt LED Street light fitting 230 V AC Outdoor type with high pressure aluminium housing and heat resistant complete with driver lamp bracket with impact and corrosion resistant incl thermal management in multiple optics complete with IP 66 protection A. Make Havells OR equivalent in Phillips, Crompton

Taking down old Unsv street lights and S &F for 60 watt LED Street light fitting 230 V AC Outdoor type with high pressure aluminium housing and heat resistant complete with driver lamp bracket with impact and corrosion resistant incl thermal management in multiple optics complete with IP 66 protection A. Make Havells OR equivalent in Phillips, Crompton

Taking down old Unsv street lights and S &F for 35 watt LED Street light fitting 230 V AC Outdoor type with high pressure aluminium housing and heat resistant complete with driver lamp bracket with impact and corrosion resistant incl thermal management in multiple optics complete with IP 66 protection A. Make Havells OR equivalent in Phillips, Crompton

Taking down old/unsv flood lights from high mast light of any type and S &F for LED flood light of capacity 100 Watt Lumainire AC outdoor type with thermal management in multiple optics and equip with IP 66 protection Make: Wipro, Havells or equivalent in specification of make Phillips, Crompton

Street Light bracket for street lights fittings made to shape as directed 1.5 mtr long including fixing of light fittings and bracket with MS Clamps, Nuts and bolts of appropriate size complete all as specified and directed.

Weather proof flat twin Core PVC insulated & sheathed Aluminium stranded conductor cables 1 sqmm drawn through street light pole duly making the hole upper and connection the street light to DB Box all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised strip 32x6mm by means of bolts, nuts, check nuts and washers of galvanised iron and light grade protection pipe of 40 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh, including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45cm x 45cm x 45 cm,RCC cover 1:2:4 type B1 of size 45x45x6 cm, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed. Note:- The required resistance of Earthing shall be less than 3 ohm, If not found to the required resistance, the contractor has to do re earthing for required resistance and the cost for the same included in the quoted rate and no extra shall be paid on failure of getting required resistance.

Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sectionsincluding nuts, bolts, washers,welding, bending cold or hot,drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, oneunder coat and one finishing coat of paint all as specified and directed.

Supply, installation, connecting electrically and testing of street light junction box size 450x250x300mm, pole mounted made out of CRCA sheet 2 mm thick, powder coated having door with magnetic lock complete with bus bar 4 Nos suitable for 3 phase 4 wire supply system, made of aluminium strip of size 20x3mm including fixing arrangement made of MS Clamps of requisite size nuts, bolts and washers complete all as specified and directed.